Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photon production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Quantifying the Exospheric Component of Soft X-ray Emission

High charge state heavy ions in the solar wind exchange charge with ambient neutral gas. This process creates a product ion in an excited state. During the radiative cascade process, EUV and X-ray photons are emitted with energies in the range of about 100 eV to 1 keV. Because the terrestrial exospheric density at the nominal magnetopause location is relatively high, approx. 10 cu cm, solar wind charge exchange, or SWCX, can be observed by Earth-orbiting soft X-ray instruments such as the ROSAT Position Sensitive Proportional Counters (PSPC). In this presentation, we will compare simulated and observed soft Xray emission during an event on August 18-19, 1991 and discuss the role of exospheric SWCX emission for this and other events.

Kuntz, Kip↗
NASA NTRS2012

Metallic Species, Oxygen and Silicon in the Lunar Exosphere: Upper Limits and Prospects for LADEE Measurements

The only species that have been so far detected in the lunar exosphere are Na, K, Ar,and He. However, models for the production and loss of species derived from the lunarregolith through micrometeoroid impact vaporization, sputtering, and photon-stimulateddesorption, predict that a host of other species should exist in the lunar exosphere.Assuming that loss processes are limited to ballistic escape, photoionization, and recyclingto the surface, we have computed column abundances and compared them to publishedupper limits for the Moon. Only for Ca do modeled abundances clearly exceed theavailable measurements. This result suggests the relevance of some loss processes thatwere not included in the model, such as the possibility of gas-to-solid phasecondensation during micrometeoroid impacts or the formation of stable metallic oxides.Our simulations and the recalculation of efficiencies for resonant light scattering showthat models for other species studied are not well constrained by existingmeasurements. This fact underlines the need for improved remote and in situmeasurements of the lunar exosphere such as those planned by the Lunar Atmosphereand Dust Environment Explorer (LADEE) spacecraft. Our simulations of the LADEEneutral mass spectrometer and visibleultraviolet spectrometer indicate that LADEE measurements promise to provide definitive observations or set stringent upper limitsfor all regolith-driven exospheric species. We predict that observations by LADEE willconstrain assumed model parameters for the exosphere of the Moon.

lunar exosphere↗
NASA NTRS1983

Stimulation of lettuce productivity by manipulation of diurnal temperature and light

Salad Bowl and Waldmann's Green leaf lettuce (Lactuca sativa L.) were exposed to photosynthetic photon flux densities (PPFDs) of 444 or 889 micromol/s per sq m for 20 hrs/day under a diurnal temperature regime of 25-C days/15-C nights or 20-C days/15-C nights. Leaf dry weight of both cultivars was highest under the high PPFD/warm temperature regime and lowest under the low PPFD/cool temperature regime. Waldmann's Green yielded more than did Salad Bowl at 889 micromol/s per sq m and 25-C days/20-C nights. Under high PPFD, both cultivars yielded better with 25-C days/25-C nights than with 25-C days/20-C nights, although relative growth rates were the same under both temperature regimes.

Knight, Sharon L.↗
DOE OSTI2023

Observation of $Wγγ$ triboson production in proton-proton collisions at s = 13 TeV with the ATLAS detector

This letter reports the observation of W(ℓν)γγ production in proton-proton collisions. This measurement uses the full Run 2 sample of events recorded at a center-of-mass energy of $\sqrt{s}$ = 13 TeV by the ATLAS detector at the LHC, corresponding to an integrated luminosity of 140 fb -1 . Events with a leptonically-decaying W boson and at least two photons are considered. The background-only hypothesis is rejected with an observed and expected significance of 5.6 standard deviations. The inclusive fiducial production cross section of W(eν)γγ and W(μν)γγ events is measured to be σ fid = 13.8 ± 1.1(stat) $^{+2.1}_{-2.0}$(syst) ± 0.1(lumi) fb, in agreement with the Standard Model prediction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

The photon content of the proton in the CT18 global analysis

Recently, two photon PDF sets based on implementations of the LUX ansatz into the CT18 global analysis were released. In CT18lux, the photon PDF is calculated directly using the LUX master formula for all scales, \mu μ . In an alternative realization, CT18qed, the photon PDF is initialized at the starting scale, \mu_0 μ 0 , using the LUX formulation and evolved to higher scales \mu(>\mu_0) μ ( > μ 0 ) with a combined QED+QCD kernel at \mathcal{O}(\alpha),~\mathcal{O}(\alpha\alpha_s) 𝒪 ( α ) , 𝒪 ( α α s ) and \mathcal{O}(\alpha^2) 𝒪 ( α 2 ) . In the small- x x region, the photon PDF uncertainty is mainly induced by the quark and gluon PDFs, through the perturbative DIS structure functions. In comparison, the large- x x photon uncertainty comes from various low-energy, nonperturbative contributions, including variations of the inelastic structure functions in the resonance and continuum regions, higher-twist and target-mass corrections, and elastic electromagnetic form factors of the proton. We take the production of doubly-charged Higgs pairs, (H^{++}H^{--}) ( H + + H − − ) , as an example of scenarios beyond the Standard Model to illustrate the phenomenological implications of these photon PDFs at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1985

Time extended production of neutrons during a solar flare

The most energetic neutral emissions expected from solar flares are gamma rays (10 MeV) from relativistic primary and secondary electron bremsstrahlung,from approx 0 meson decay, and from neutrons ( 50 MeV). Bremsstrahlung photon energies extend to that of the highest energy electron present, but the shape of the pi sup 0 gamma ray spectrum, peaking at 69 MeV, does not depend strongly on the proton spectrum above threshold, which is approx. 292 MeV for meson production on protons. The highest energy neutrons observed indicate directly the highest energy ions which interact at the Sun, and the presence or absence of anergy cutoff in the acceleration process. The high-energy proton spectrum shape can be determined from the neutron spectrum.

Chupp, E. L.↗
DOE OSTI2021

Study of scintillation light collection, production and propagation in a 4 tonne dual-phase LArTPC

The 3×1×1 m3 demonstrator is a dual phase liquid argon time projection chamber that has recorded cosmic rays events in 2017 at CERN. The light signal in these detectors is crucial to provide precise timing capabilities. The performance of the photon detection system, composed of five PMTs, are discussed. The collected scintillation and electroluminescence light created by passing particles has been studied in various detector conditions. In particular, the scintillation light production and propagation processes have been analyzed and compared to simulations, improving the understanding of some liquid argon properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1984

The production spectrum of a relativistic Maxwell-Boltzmann gas

A formula is derived for use in the calculation of the spectrum of particles or photons produced through particle collisions in a Maxwell-Boltzmann gas. The result is valid for all temperatures and for the general case when the gas contains different mass particles. It is written in terms of a double integral over the cross section differential in the energy of the produced particles (or photons) in the center-of-momentum system of two colliding particles. Analytic expressions for the reaction rate and luminosity are also derived and reproduce the findings of previous work. Application to the problem of the annihilation spectrum from a relativistic Maxwell-Boltzmann electron-positron gas is made. Agreement is found between the present work and previous numerical and analytical studies.

Dermer, C. D.↗
DOE OSTI2025

Constraining the Low-Temperature Oxidation Mechanism of n -Hexanol through the Detection and Identification of C 6 Elusive Intermediates

Alcohol-based fuels are currently considered to be viable energy carriers for the transportation sector. Consequently, a comprehensive mechanistic understanding of the low-temperature oxidation of alcohols is essential for application in advanced low-temperature compression engines. Here, in this work, a multidimensional approach involving experimental investigations, kinetic modeling, and theoretical calculations was used to provide new insights into the low-temperature oxidation mechanism of a C 6 alcohol, n -hexanol (CH 3 (CH 2 ) 5 OH), through the detection and identification of elusive C 6 intermediates. The oxidation of n-hexanol was investigated in a jet-stirred reactor under stoichiometric conditions (ϕ = 1.0), an initial fuel concentration of 2%, a residence time of 2 s, a temperature range between 500 and 660 K, and a pressure of 700 Torr. The reactants, intermediates, and final products were detected and identified by means of molecular-beam mass spectrometry coupled with single-photon ionization employing tunable synchrotron-generated vacuum ultraviolet radiation. Chemical kinetic simulations were performed using a previously published kinetic model (Togbé et al., Energy Fuels 2010, 11, 5859−5875) to predict the reactivity of n-hexanol and elucidate the predominant formation pathways of the observed low-temperature species. Experimental photoionization efficiency curves in conjunction with ab initio calculations, enabled the identification of important low-temperature species, such as C 6 unsaturated alcohols, C 6 olefinic hydroperoxides, C 6 cyclic ethers, C 6 diones, and C 6 ketohydroperoxides. The results of this study provide valuable insight into the mechanism of the low-temperature oxidation chemistry of n -hexanol, contributing to the development of kinetic models for the low-temperature oxidation of n-hexanol and other long-chain linear alcohols.

alcohols↗
DOE OSTI2024

Time-of-flight vs time-of-arrival in neutron spectroscopic measurements for high energy density plasmas

The neutron time-of-flight (nToF) diagnostic technique has a lengthy history in Inertial Confinement Fusion (ICF) and High Energy Density (HED) Science experiments. Its initial utility resulted from the simple relationship between the full width half maximum of the fusion peak signal in a distant detector and the burn averaged conditions of an ideal plasma producing the flux [Lehner and Pohl, Z. Phys. 207, 83–104 (1967)]. More recent precision measurements [Gatu-Johnson et al., Phys. Rev. E 94(8), 021202 (2016)] and theoretical studies [Munro, Nucl. Fusion 56, 035001 (2016)] have shown the spectrum to be more subtle and complicated, driving the desire for an absolute calibration of the spectrum to disambiguate plasma dynamics from the conditions producing thermonuclear reactions. In experiments where the neutron production history is not well measured, but the neutron signal is preceded by a concomitant flux of photons, the spectrum can be in situ calibrated using a set of collinear detectors to obtain a true “time-of-flight” measurement. This article presents the motivation and overview of this technique along with estimates of the experimental precision needed to make useful measurements in existing and future nToF systems such as the pulsed power Z-machine located in Albuquerque, NM, at Sandia National Laboratories.

Fusion experiments↗
DOE OSTI2025

Measurement of directional muon beams generated at the Berkeley Lab Laser Accelerator

We present the detection of directional muon beams produced using a PW laser facility at the Lawrence Berkeley National Laboratory. The muon source is a multi-GeV electron beam generated in a laser-plasma accelerator interacting with a high- converter target. The GeV photons resulting from the interaction are converted into a high-flux, directional muon beam via pair production. By employing scintillators to capture delayed events, we were able to identify the produced muons and characterize the source. Using theoretical knowledge of the muon production process combined with simulations that are in excellent agreement with the experiments, we demonstrate that laser-plasma accelerators have the capability of generating electron beams with characteristics suitable to produce GeV-scale muons that offer unique advantages with respect to the cosmic background. Laser-plasma-accelerator-based muon sources can therefore enhance muon imaging applications thanks to their compactness, directionality, and high yields, which reduce the exposure time by orders of magnitude compared to cosmic ray muons. Using the eant4-based simulation code we developed to gain insight into the experimental results, we can design future experiments and applications based on LPA-generated muons.

Terzani, Davide↗
DOE OSTI2022

Single-pion contribution to the Gerasimov-Drell-Hearn sum rule and related integrals

Phenomenological amplitudes obtained in partial-wave analyses (PWA) of single-pion photoproduction are used to evaluate the contribution of this process to the Gerasimov-Drell-Hearn (GDH), Baldin and Gell-Mann-Goldberger-Thirring (GGT) sum rules, by integrating up to 2 GeV in photon energy. Here, our study confirms that the single-pion contribution to all these sum rules converges even before the highest considered photon energy, but the levels of saturation are very different in the three cases. Single-pion production almost saturates the GDH sum rule for the proton, while a large fraction is missing in the neutron case. The Baldin integrals for the proton and the neutron are both saturated to about four fifths of the predicted total strength. For the GGT sum rule, the wide variability in predictions precludes any definitive statement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Higher Throughput, Lower Cost Processing of Flexible Perovskite Solar Cells by Photonic Curing

The objectives of this SETO project are to explore whether photonic curing can be used to perform annealing in perovskite solar cell (PSC) fabrication, and if so, whether it can enable high-throughput PSC manufacturing. The successful outcome of the project will reduce manufacturing cost towards realizing the SETO goal of the Levelized cost of electricity (LCOE) $0.03/kWh by 2030. The project is a collaboration between Hsu’s group at the University of Texas at Dallas (UTD) and NovaCentrix, an Austin TX based company that pioneered the PulseForge® photonic curing tools and has expertise in applying this technology to printed electronics. Thin-film synthesis typically involves a thermal annealing step to convert from precursors to final material phases, to obtain the desired crystalline phase, or to improve materials structural or electrical properties. However, thermal annealing typically requires high temperatures that are incompatible with inexpensive plastic substrates and annealing times lasting tens-to-hundreds of minutes, making it incompatible with roll-to-roll (R2R) manufacturing at a desirable web speed. Photonic curing uses a flash Xe lamp to deliver short (20 µs to 100 ms) but high intensity (up to 50 kW/cm 2 ) pulses of broadband light (200 – 1500 nm) to the sample. It has been successfully applied to sinter printed metal nanoparticle inks into conductive patterns. This project aimed to extend the applications of photonic curing to convert halide perovskite films and transparent metal oxide transport layers. Despite the interruption by COVID-19, we have achieved significant accomplishments to establish photonic curing as a viable technology for the high-throughput manufacturing of PSCs. (1) We demonstrated that photonic curing can convert both metal oxide transport layer and halide perovskite absorber in the PSCs and successfully made flexible PSCs on Corning Willow glass® (WG)/ indium tin oxide (ITO) substrates without any thermal annealing steps. These photonically cured devices achieve performance comparable to conventional thermally annealed devices but were fabricated with a total processing time reduced by six orders of magnitude. We also show that photonic curing can achieve desirable web speed (up to 26 m/min) and large-area uniformity. (2) By establishing photonic curing processing phase spaces for the perovskite, we show that the longer pulses are more forgiving in small variation in the photonic curing conditions, making it more suitable for R2R manufacturing. (3) Our results clearly illustrated the importance of improving mechanical and optical properties of transparent electrodes on flexible substrates. (4) We also performed fundamental studies that elucidate the interactions between perovskite absorber and metal oxide transport layer that can undermine the PSC stability. Five refereed journal papers in top journals (ACS Energy Letters, npj Flexible Electronics, ACS Applied Energy Materials, Materials Advances, and Frontiers in Energy Research), one conference proceeding (PVSC-47), six conference presentations (PVSC and Materials Research Society meetings), and a Ph.D. dissertation (Trey B. Daunis) were produced under this project. Energy Materials Corporation (EMC) has forecast that with a 1.5 m wide web moving at a web speed of 30 m/min, R2R processing of PSC could provide up to 4 GW/year for a single R2R assembly line. Replacing thermal annealing with photonic curing, as demonstrated by the accomplishments of this project, is necessary to realize such an energy production goal.

14 SOLAR ENERGY↗
NASA NTRS1984

CN and C2H in IRC +10216

The effects of the production of the radicals CN and C2H from the dissociation of HCN and C2H2 by ambient UV photons in the outer envelope of IRC +10216 are investigated. The spatial distribution of the radicals and their observable millimeter emission-line characteristics are calculated from the inferred abundances of the progenitor species in the envelope of IRC +10216 using photochemical and radiative transfer models. These are compared with available observations to examine whether photoproduction is a possible explanation of the observed emission from these species. The results suggest that the variable abundances induced by photodestruction of their progenitors do affect the observed emission from the radicals.

Huggins, P. J.↗
NASA NTRS1989

Satellite observation of atmospheric nuclear gamma radiation

Satellite observations of the spectrum of gamma radiation from the earth's atmosphere in the energy interval from 300 keV to 8.5 MeV were obtained with a gamma-ray spectrometer during 1980-1983. A total of 20 atmospheric line features are superimposed on a continuum background which is modeled using a power law with an index of -1.16. The line energies and intensities are consistent with production by secondary neutrons interacting with atmospheric N-14 and O-16. The intensity and spectrum of photons at energies below the 511-keV line, in excess of a power law continuum, are explained by Compton scattering of the annihilation line photons in traversing an average of 21 g/sq cm of atmosphere.

Letaw, John R.↗
NASA NTRS1989

Nonthermal synchrotron radiation and pair annihilation in gamma-ray bursts

A self-consistent Monte Carlo simulation of quantized synchrotron emission, pair production, and pair annihilation in strong (2 x 10 to the 12th G or greater) magnetic fields is presented as a model of the production of annihilation lines in gamma-ray burst sources. The calculation determines the self-consistent photon spectrum and pair distribution functions resulting from a nonthermal injection of electrons into a region of homogeneous, strong magnetic field. The results indicate that the appearance of observable annihilation features in gamma-ray burst spectra requires isotropic or fan-beamed injection of electrons with energies of at least 5 MeV. The lines are narrow because higher energy electrons escape annihilation and do not contribute to Doppler-broadening. Injection beamed along the field did not produce observable annihilation lines in any of the cases studied. As a result, emission at energies much greater than 1 MeV produced through beaming seems to be incompatible with observable annihilation in this model. These results are discussed in relation to observed features in gamma-ray burst spectra.

Preece, Robert↗
NASA NTRS1989

Carbon use efficiency in optimal environments

The short- and long-term effects of environmental changes on plant productivity are studied using a model in which yield is determined by four factors: absorption of photosynthetic photon flux, photosynthetic efficiency, respiratory carbon use efficiency, and harvest index. The characteristics of the model are reviewed. Emphasis is given to the relationship between carbon use efficiency and yield. The biochemical pathways resulting in CO2 efflux are examined, including photorespiration, cyanide-resistant respiration, and dark respiration. The possibility of measuring photosynthesis and respiration in a CELSS is discussed.

Bugbee, Bruce↗