Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photon absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Broadband Plasmonic Photocurrent Enhancement from Photosystem I Assembled with Tailored Arrays of Au and Ag Nanodisks

Plasmonic interactions between metal nanostructures and fluorophores have been increasingly employed to alter photoexcitation pathways in multichromophore photosynthetic proteins like photosystem I (PSI). Our recent experimental studies demonstrated a sixfold plasmon-enhanced photocurrent from PSI assembled on Fischer patterns of Ag nanopyramids. However, lack of control over the specific resonance modes limited the magnitude and selectivity of the plasmonic enhancement. To this end, the present study investigates the excitation wavelength-dependent plasmon-enhanced photocurrents from PSI immobilized around highly ordered Au (AuND) and Ag (AgND) nanodisks with dipolar plasmon resonances that are tuned to ~680 and 560 nm, respectively. Specifically, we report plasmon-induced photocurrent enhancements of ~6.8 and 17.5 for excitation wavelengths of ~680 and 565 nm, respectively, as compared to PSI assembled on planar ITO substrates. We also report the action spectra for photocurrent enhancements recorded over wavelengths of 395–810 nm with nine discrete LED light sources. The results indicate the following: (1) concurrence between the photocurrent-enhancement spectra from PSI assemblies and the plasmonic resonances for the respective nanopatterned substrates, and (2) broadband photocurrent enhancements due to plasmon-coupled photoactivation in the otherwise blind chlorophyll regions of the native PSI absorption spectra. Lastly, these intriguing findings pave the path for rational assembly of future biohybrid structures composed of natural light-harvesting antennae and plasmonic metal nanostructures.

36 MATERIALS SCIENCE↗

An all-dielectric metasurface as a broadband optical frequency mixer

A frequency mixer is a nonlinear device that combines electromagnetic waves to create waves at new frequencies. Mixers are ubiquitous components in modern radio-frequency technology and microwave signal processing. The development of versatile frequency mixers for optical frequencies remains challenging: such devices generally rely on weak nonlinear optical processes and, thus, must satisfy phase-matching conditions. Here we utilize a GaAs-based dielectric metasurface to demonstrate an optical frequency mixer that concurrently generates eleven new frequencies spanning the ultraviolet to near-infrared. The even and odd order nonlinearities of GaAs enable our observation of second-harmonic, third-harmonic, and fourth-harmonic generation, sum-frequency generation, two-photon absorption-induced photoluminescence, four-wave mixing and six-wave mixing. The simultaneous occurrence of these seven nonlinear processes is assisted by the combined effects of strong intrinsic material nonlinearities, enhanced electromagnetic fields, and relaxed phase-matching requirements. In conclusion, such ultracompact optical mixers may enable a plethora of applications in biology, chemistry, sensing, communications, and quantum optics.

47 OTHER INSTRUMENTATION↗

Quantitative analysis of carbonaceous aerosols using Laser-Induced Breakdown Spectroscopy: A study on mass loading induced plasma matrix effects.

We present results indicating mass loading induced plasma matrix effects on the application of quantitative laser-induced breakdown spectroscopy (LIBS) for estimation of carbon contents in aerosols. An in-house flow-controlled powder-dispersion system generated carbonaceous aerosols with varying bi-modal particle size distributions ({approx} 1 {micro}m and 10 {micro}m median diameters), thereby resulting in a wide mass loading range. For ease of chemical handling and to eliminate toxic effects, common talcum powder was used as our standard aerosol. Normalized atomic species concentrations of C, i.e., (C)/(Si) ratios, were calculated from atomic emission lines of C I (248 nm), Si I (252 nm), and plasma temperatures estimated from a series of Mg I lines. The results show a decrease in (C)/(Si) ratio to about 65% of the initial value as relative mass loadings increased (5.5-100%) due to the increase in number concentrations of larger sized particles ({approx}10 {micro}m median diameter). As a comparison, normalized ratio of (Mg)/(Si) did not exhibit any marked change with increased mass loading. The normalized total absorption of photon flux across the C I (248 nm) spectral line indicated a strong correlation to the percentage decrease in (C)/(Si) ratio. We used an impactor with a cut-off size of around 10 {micro}m diameter to generate mono-modal aerosolized powders ({approx}1 {micro}m median diameter) that had lower relative mass loadings (0.32-0.16%). Similar LIBS analysis on these did not indicate any of the matrix effects. We conclude that for aerosol systems with widely varying mass loadings, quantitative LIBS analysis can be significantly affected by plasma matrix effects, specifically for the C I (248 nm) emission line as noticed in this study. This bears significance for the application of quantitative LIBS in the chemical characterization of all forms of carbonaceous aerosols.

Mukherjee, Dibyendu↗

p-Type BP nanosheet photocatalyst with AQE of 3.9% in the absence of a noble metal cocatalyst: investigation and elucidation of photophysical properties

While stability, significantly poor apparent quantum efficiency (AQE < 0.5%) and over dependence on noble metal cocatalysts is a long standing problem, here, we report, for the first time, microwave-exfoliated p-type few-layer black phosphorous (BP-nanosheets) as a stable photocatalyst for hydrogen production without any supporting noble metal co-catalyst. This few layer BP has shown a record high apparent quantum efficiency (AQE) of ~4% at 420 nm under visible light irradiation. This unprecedented AQE stems from a low level of material oxidation that impedes the degradation of BP under ambient conditions, strong absorption of photons at the surface, and a conduction band edge position that favorably facilitates the proton reduction reaction. These BP-nanosheets have also shown superior photocatalytic performance compared to the known cohort of metal-free photocatalysts such as graphitic carbon nitride, carbon dots, and red-P under identical experimental conditions. An understanding of the photo-physicochemical reasons that drive this chemistry is elucidated along with results obtained from physicochemical characterization and finite difference time domain simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarization Spectroscopy Modeling With The Inclusion Of Radiation Transport

In the past we have modeled and studied the properties of plasma X-ray line emissions separately focusing on two features of observed radiation. First, we modeled the polarization properties of He-like Fe resonance lines in EBIT experiments [1] and of Li-like and He-like Si satellite lines in laser-produced plasmas [2, 3]. These calculations were performed in the optically thin approximation. Second, we modeled and analyzed Al X-ray line spectra recorded in experiments with targets irradiated by high-intensity, sub-picosecond-duration laser pulses [4, 5]. These experimental spectra were recorded as not polarized; on the other hand, however, we showed the importance of opacity effects on the formation of resonance lines from the He-like and H-like ions by performing spectroscopic-quality radiation-transport calculations. In the present work we combine the two aspects by adding the consideration of opacity effects into our collisional-radiative magnetic-sublevel atomic kinetics model for calculating the polarization properties of line emissions.We present a modeling study of He-like Cl polarized line emissions generated under conditions typical of laser-produced plasmas. A magnetic-sublevel population model is followed by a radiation-transport model that describes emission and absorption of photons while keeping track of their polarization state. Several spectral lines are studied in detail with the goal of understanding the formation of their polarization properties and their possible alteration during radiation transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical and electron transport properties of rock-salt Sc{sub 1−x}Al{sub x}N

Epitaxial single-crystal Sc{sub 1−x}Al{sub x}N ternary alloy layers deposited by magnetron co-sputtering on MgO(001) substrates at 950 °C exhibit a solid solution rock-salt phase for x = 0–0.2 without decomposition. Optical absorption indicates a linear increase in the optical gap from 2.51 eV for ScN to 3.05 eV for Sc{sub 0.8}Al{sub 0.2}N and, after correction due to the Moss-Burstein shift, a direct X point interband transition energy E{sub g}(X) = 2.15 + 2.75 x (eV). Correspondingly, the direct transition at the zone center increases with Al concentration according to E{sub g}(Γ) = 3.80 + 1.45 x (eV), as determined from a feature in the reflection spectra. All layers are degenerate n-type semiconductors with a room temperature mobility that decreases from 22 to 6.7 to 0.83 cm{sup 2}/V s as x increases from 0 to 0.11 to 0.20. The corresponding carrier densities are 9.2 × 10{sup 20}, 7.9 × 10{sup 20}, and 0.95 × 10{sup 20 }cm{sup −3} as determined from Hall measurements and consistent with optical free carrier absorption below photon energies of 1 eV. Temperature dependent transport measurements indicate metallic conduction for ScN, but weak localization that leads to a resistivity minimum at 85 and 210 K for x = 0.051 and 0.15, respectively, and a negative temperature coefficient over the entire measured 4–300 K range for Sc{sub 0.8}Al{sub 0.2}N. The decreasing mobility is attributed to alloy scattering at randomly distributed Al atoms on cation sites, which also cause the weak localization. The carrier density is primarily due to unintentional F doping from the Sc target and decreases strongly for x > 0.15, which is attributed to trapping in defect states due to the deterioration of the crystalline quality, as evidenced by the x-ray diffraction peak width that exhibits a minimum of 0.14° for x = 0.11 but increases to 0.49° for x = 0.20. This is consistent with asymmetric x-ray diffraction analyses, indicating a relaxed lattice constant that decreases from 4.511 ± 0.005 to 4.411 ± 0.004 Å for x = 0–0.2, and a biaxial in-plane compressive strain that decreases from −1.1% to −0.2% as x increases from 0 to 0.11, which is attributed to the higher Al adatom mobility, but increases again to −1.8% for x = 0.20, as x approaches the critical composition for phase separation, which causes structural instability and a higher defect density.

36 MATERIALS SCIENCE↗

Quantization effects in semiconductor nanostructures and singlet fission in molecular chromophores for photovoltaics and solar fuels

Hot carriers in semiconductors are electrons and/or holes that have energies greater than carriers that reside at the top and bottom of the conduction and valence bands, respectively; the latter carriers are in equilibrium with the lattice and have a temperature equal to the lattice (ambient) temperature. Hot carriers are created in semiconductors upon the absorption of photons with energies greater than the bandgap. The excess energy above the bandgap energy is in the form of kinetic energy. The hot carriers can cool to the lattice temperature via electron–phonon scattering and establish separate Boltzmann distributions for electrons and holes at the band edges. Thus, upon cooling, the excess kinetic energy of the hot carriers is transformed into heat and is unavailable to be converted into electrical or chemical free energy in a solar photon-converting cell. This hot-carrier cooling process significantly limits the maximum possible power conversion efficiency (PCE) of the free energy of solar photons into electrical free energy or chemical free energy in chemical bonds of fuels. However, if hot-carrier cooling can be slowed such that the hot carriers can be extracted before cooling to create higher photovoltages, or utilized to create additional electron-hole pairs through carrier multiplication, then beneficial use can be made of the excess energy of hot carriers and the maximum thermodynamic PCE can be dramatically increased. Quantization effects in semiconductor nanostructures, unique properties of some bulk semiconductors, and exciton multiplication in both semiconductors and molecular chromophores that undergo singlet fission have shown a path forward for potential dramatic increases in the PCEs of solar photons into electricity and solar fuels. The status, history, and future promise of the science and technology of these future approaches for different types of photovoltaic cells and cells for solar fuels will be discussed.

14 SOLAR ENERGY↗

The Development of Kinetic and Radiation Hydrodynamics Modeling of Thermonuclear Burn Propagation in Isochoric p - 11 B Through the Support of the INFUSE Program

The report summarizes DOE INFUSE-supported work between HB11 Energy and the University of Rochester’s TriForce Institute to improve computational modeling of advanced fusion fuels, especially proton–boron-11 (p- 11 B). The project extended the TriForce particle-in-cell/Monte Carlo collision code to include physics needed for dense, high-temperature p- 11 B burn studies, including p- 11 B fusion reactions, three-alpha-particle reaction products, relativistic Coulomb collisions, large-angle nuclear scattering, bremsstrahlung radiation, inverse bremsstrahlung absorption, and photon transport. The upgraded models were verified against focused physics tests and against known deuterium–tritium burn behavior. The study then used one-dimensional spherical simulations to estimate the conditions required for thermonuclear burn propagation in isochoric p- 11 B fuel. The calculations found that burn propagation is possible in the model, but only under very extreme hot-spot conditions, such as about 7000 g/cm 3 at 500 keV or 9000 g/cm 3 at 300 keV for a 20-micron hot spot. These conditions are much more demanding than current demonstrated inertial confinement fusion hot spots. The report concludes that the INFUSE collaboration successfully advanced kinetic and radiation modeling capabilities for p- 11 B fusion and provided useful estimates of ignition requirements. However, the simulated fuel gains remain below what would be needed for practical inertial fusion energy, and further work is needed to reconcile differences among kinetic, radiation-hydrodynamic, and analytic models and to identify more achievable target designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE UNUSUAL X-RAY BINARIES OF THE GLOBULAR CLUSTER NGC 6652

Our 5 ks Chandra ACIS-S observation of the globular cluster NGC 6652 detected seven X-ray sources, three of which were previously unidentified. This cluster hosts a well-known bright low-mass X-ray binary, source A (or XB 1832-330). Source B shows unusual rapid flaring variability, with an average L{sub X} (0.5-10 keV) {approx}2 x 10{sup 34} erg s{sup -1}, but with minutes-long flares up to L{sub X} = 9 x 10{sup 34} erg s{sup -1}. Its spectrum can be fit by an absorbed power law of photon index {Gamma} {approx} 1.24 and hardens as the count rate decreases. This suggests that part or all of the variation might be due to obscuration by the rim of a highly inclined accretion disk. Sources C and D, with L{sub X} {approx} 10{sup 33} erg s{sup -1}, have soft and unusual spectra. Source C requires a very soft component, with a spectrum peaking at 0.5 keV, which might be the hot polar cap of a magnetically accreting polar cataclysmic variable. Source D shows a soft spectrum (fit by a power law of photon index {approx}2.3) with marginal evidence for an emission line around 1 keV; its nature is unclear. The faint new sources E, F, and G have luminosities of 1-2 x 10{sup 32} erg s{sup -1}, if associated with the cluster (which is likely). E and F have relatively hard spectra (consistent with power laws with photon index {approx}1.5). G lacks soft photons, suggesting absorption with N{sub H} > 10{sup 22} cm{sup -2}.

79 ASTRONOMY AND ASTROPHYSICS↗

Auger-induced charge migration

Novel perspectives of controlling molecular systems have recently arisen from the possibility of generating attosecond pulses in the ultraviolet regime and tailoring electron dynamics in its natural time scale. The cornerstone mechanism is the so-called charge migration, he production of a coherent charge transfer with subfemtosecond oscillations across a molecule. Typically, charge migration is induced by the ionization of valence molecular orbitals. However, recent technological developments allow the generation of attosecond pulses in the x-ray regime. Here, in this case, the absorption of photons creates core-hole states. In light elements, core-hole states mainly decay by Auger processes that, driven by electron correlations, involve valence orbitals. We theoretically demonstrate in a fluoroacetylene molecule a double-hole charge migration triggered by attosecond core-electron photoionization, followed by Auger electron relaxations. This opens a new route for inducing with x rays charge transfer processes in the subfemtosecond time scale.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy Level Gradients from Surface to Bulk in Hybrid Metal-Halide Perovskite Thin Films

Variations in local strain, defect densities, and composition of hybrid metal-halide perovskites have been reported to create heterogeneous energy landscapes in thin films, which impact charge-carrier diffusion and recombination dynamics. Here, we employ one- and two-photon transient absorption spectroscopy to selectively probe the dynamics of charge carriers from surface and bulk regions of methylammonium lead bromide thin films. Differences in the transient absorption spectra indicate that an energy gradient of approximately 100 meV is formed between the higher band-gap surface and lower band-gap bulk regions. Thus, during their lifetime, photoexcited carriers move away from the surface to recombine in the bulk, where our experiments detect long-lived charge populations despite the significant band splitting that has conventionally been assumed to inhibit efficient radiative recombination. Supported by first-principles calculations, we demonstrate that bright emission can still arise from the bulk with states that occupy a wide range of momenta in the vicinity of the band extrema, which show strong dipole transitions. Our results report that photoexcitations in the hybrid perovskites avoid defect-rich surface regions, and that particularly strong emission is generated from accumulated excitation populations in the bulk. Published by the American Physical Society 2024

Bourelle, Sean A.↗

The impact of metal line reflections on through-wafer TPA SEE testing

Charge-collection experiments and simulations designed to quantify the effects of reflections from metallization during through-wafer TPA testing are presented. The results reveal a strong dependence on metal line width and metal line position inside the SiO 2 overlayer. The charge-collection enhancement is largest for the widest metal lines and the metal lines closest to the Si/SiO 2 interface. The charge-collection enhancement is also dependent on incident laser pulse energy, an effect that is a consequence of higher-order optical nonlinearities induced by the ultrashort optical pulses. However, for the lines further away from the Si/SiO 2 interface, variations in laser pulse energies affect the charge-collection enhancement to a lesser degree. Z-scan measurements reveal that the peak charge collection occurs when the axial position of the laser focal point is inside the Si substrate. There is a downward trend in peak collected-charge enhancement with the increase in laser pulse energies for the metal lines further away from the Si/SiO 2 interface. Metallization enhances the collected charge by same amount regardless of the applied bias voltage. In conclusion, for thinner metal lines and laser pulse energies lower than 1 nJ, the collected charge enhancement due to metallization is negligible.

36 MATERIALS SCIENCE↗

The Effect of the Gate-Connected Field Plate on Single-Event Transients in AlGaN/GaN Schottky-Gate HEMTs

A focused pulsed X-ray beam is used to determine how the redistribution of the electric field by the gate-connected field plate affects single-event transient (SET) susceptibility of an AlGaN/GaN Schottky-gate HEMT on SiC. SETs generated by scanning the X-ray beam across the HEMT depend strongly on the presence of the field plate, radiation strike location, bias conditions, and X-ray photon energy. Furthermore, for the particular HEMT we tested, the gate-connected field plate reduces the electric-field strength near the edge of the gate by a factor of approximately 2, which results in faster decaying transients and less collected charge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of Single-Event Transients in an Epitaxial Silicon Diode Resulting from Heavy Ion-, Focused X-Ray-, and Pulsed Laser-Induced Charge Generation

Heavy ion, focused x-ray, and pulsed laser single event transient experiments are performed on a silicon epitaxial diode. Collected charge, transient rise times, and transient fall times are calculated and compared between the different sources. It is observed that these transient shape characteristics depend on the source (ion, x-ray, or laser), even when similar amounts of charge are generated. Finally, the observed differences are examined and explained in terms of basic charge collection mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding fifth-harmonic generation in CLBO

Here, we report on results of fifth harmonic generation in Cesium Lithium Borate (CLBO) using a three-crystal cascaded frequency conversion scheme designed to study the energy balance of the final sum frequency generation stage. The experimental setup independently combines the first and fourth harmonic of a Nd:Glass laser in a 5mm thick CLBO crystal. Energy balance between the incoming and output energy is close to unity when the CLBO is out of phase matching and approximately 80% when the crystal is in phase matching. A detailed analysis of the residual fundamental and fourth harmonic energy indicates 5th harmonic light is being generated but only 26% is unaccounted for. We attribute the missing light to linear transmission loss in the CLBO oven. The ratio of the output to input energy is unity when the missing 5th harmonic is incorporated into the calculations. Two-dimensional plane wave mixing simulations show agreement with the results at lower intensities.

42 ENGINEERING↗

TU-AB-BRC-03: Accurate Tissue Characterization for Monte Carlo Dose Calculation Using Dual-and Multi-Energy CT Data

Purpose: To develop a general method for human tissue characterization with dual-and multi-energy CT and evaluate its performance in determining elemental compositions and the associated proton stopping power relative to water (SPR) and photon mass absorption coefficients (EAC). Methods: Principal component analysis is used to extract an optimal basis of virtual materials from a reference dataset of tissues. These principal components (PC) are used to perform two-material decomposition using simulated DECT data. The elemental mass fraction and the electron density in each tissue is retrieved by measuring the fraction of each PC. A stoichiometric calibration method is adapted to the technique to make it suitable for clinical use. The present approach is compared with two others: parametrization and three-material decomposition using the water-lipid-protein (WLP) triplet. Results: Monte Carlo simulations using TOPAS for four reference tissues shows that characterizing them with only two PC is enough to get a submillimetric precision on proton range prediction. Based on the simulated DECT data of 43 references tissues, the proposed method is in agreement with theoretical values of protons SPR and low-kV EAC with a RMS error of 0.11% and 0.35%, respectively. In comparison, parametrization and WLP respectively yield RMS errors of 0.13% and 0.29% on SPR, and 2.72% and 2.19% on EAC. Furthermore, the proposed approach shows potential applications for spectral CT. Using five PC and five energy bins reduces the SPR RMS error to 0.03%. Conclusion: The proposed method shows good performance in determining elemental compositions from DECT data and physical quantities relevant to radiotherapy dose calculation and generally shows better accuracy and unbiased results compared to reference methods. The proposed method is particularly suitable for Monte Carlo calculations and shows promise in using more than two energies to characterize human tissue with CT.

60 APPLIED LIFE SCIENCES↗

Extracting hot carriers from photoexcited semiconductor nanocrystals

This research program addresses a fundamental question related to the use of nanomaterials in solar energy -- namely, whether semiconductor nanocrystals (NCs) can help surpass the efficiency limits, the so-called “Shockley-Queisser” limit, in conventional solar cells. In these cells, absorption of photons with energies above the semiconductor bandgap generates “hot” charge carriers that quickly “cool” to the band edges before they can be utilized to do work; this sets the solar cell efficiency at a limit of ~31%. If instead, all of the energy of the hot carriers could be captured, solar-to-electric power conversion efficiencies could be increased, theoretically, to as high as 66%. A potential route to capture this energy is to utilize semiconductor nanocrystals. In these materials, the quasi-continuous conduction and valence bands of the bulk semiconductor become discretized due to confinement of the charge carriers. Consequently, the energy spacing between the electronic levels can be much larger than the highest phonon frequency of the lattice, creating a “phonon bottleneck” wherein hot-carrier relaxation is possible via slower multiphonon emission. For example, hot-electron lifetimes as long as ~1 ns have been observed in NCs grown by molecular beam epitaxy. In colloidal NCs, long lifetimes have been demonstrated through careful design of the nanocrystal interfaces. Due to their ability to slow electronic relaxation, semiconductor NCs can in principle enable extraction of hot carriers before they cool to the band edges, leading to more efficient solar cells.

14 SOLAR ENERGY↗