Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

The Fourth Stokes Parameter for Geolocation in Passive Microwave Remote Sensing from Space

Polarimetric microwave radiometers such as SMAP are capable of measuring the fourth Stokes parameter in brightness temperature over the Earth surface. The value of this parameter is normally small but exhibits sharp spikes when the scene includes large differences in emission from the surface, such occur at land/water boundaries. In this manuscript, it is shown that these spikes can be used to accurately locate coastlines with potential application to geolocation in passive microwave remote sensing from space. Examples are presented using the L-band radiometer on SMAP, first with theory using calculations with the SMAP antenna pattern and orbit and then with SMAP measurements of the fourth Stokes parameter over Madagascar. Using the SMAP data, the coastline is located with a standard deviation less than 2 km. The results are consistent with the conventional approach used for geolocation of the SMAP radiometer footprint.

Passive Microwave Remote Sensing↗
DOE OSTI2022

Sensitivity of Modal Parameters of an Offshore Wind Turbine to Operational and Environmental Factors: A Numerical Study: Preprint

The dynamics and performance of offshore wind turbines are sensitive to their structural properties, and in particular their modal parameters, i.e., natural frequencies, damping ratios and mode shapes. In this work, the sensitivity of the modal parameters of a 6 MW fixed-bottom offshore wind turbine to different operational and environmental conditions including wind speed and rotor speed is investigated. Effect of blade flexibility on the modal parameters of the system is also studied.

aerodynamic damping↗
DOE OSTI2022

Conversion of Resonance Parameters Between Wigner-Eisenbud R-matrix and Transition Matrix Pole Representation

The goal of this research is to develop a numerical code for translation between the current standard, Wigner-Eisenbud R-matrix parameters and a novel pole-representation of cross sections. The method follows Ducru et al. and constructs the conversion between these parametric representations of the scattering and reaction data. This pole representation, which expresses cross sections as a sum of simple poles (and their attendant residues), is examined in the context of the advantages provided by this compact, computationally efficient representation. These advantages include the ability to doppler broaden cross sections on-the-fly as well as a lower memory footprint when generating cross sections, an attractive feature to those interested in parallel GPU based Monte Carlo. Some conversion methods between R-matrix parameters and S-matrix poles have relied on curve fitting techniques. It is unknown weather these numerical methods necessarily preserve certain underlying physics properties of the standard R-matrix cross section model (such as unitarity). The direct conversion studied here aim to preserve such properties. This knowledge is of interest for future work into the generation of resonance parameter sensitivities.

CLUTCH↗
DOE OSTI2022

Summary of Geometric Parameters and Their Effects on Performance of U-10Mo Fuel Plates

A monolithic plate-type fuel system has been under development to convert high-performance test reactors from highly enriched uranium to low-enrichment uranium fuels and is now moving into the qualification phase, a predecessor to the timely conversion of the target reactors. To qualify this fuel system, the plates must meet safety standards and perform well in a reactor. The plates must maintain mechanical integrity, exhibit geometric stability, and have stable and predictable in-reactor behavior. The requirement to maintain mechanical integrity under normal operating conditions is primarily demonstrated by successful testing. However, each high-performance reactor employs a distinct design, resulting in distinct plate geometries, with unique features, attributes, irregularities, and tolerances. Due to the abundance of such distinct geometric varieties, a single “generic” plate geometry capturing all extremes is not achievable. It is also impractical to test each of these proposed designs in a reactor. This limitation necessitates cautious evaluations since the thermomechanical response of a plate with a certain geometry may not be representative for a plate with a significantly different geometry. To address concerns related to in-reactor plate performance, large set of sensitivity studies were performed. These parametric studies aimed to better understand irradiation performance, while evaluating the sensitivity of results to various modeling inputs, including geometric, operational, and material parameters. This work studied selected geometric parameters based on provided fuel specifications and performed a series of parametric simulations. The resulting temperature, displacement, and stress strains were comparatively evaluated to determine the effects of various geometric parameters. This draft provides a “high-level summary” of our parametric sensitivity studies and summarizes the key findings.

42 ENGINEERING↗
DOE OSTI2022

Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

The temporal analysis of products (TAP) reactor, a transient kinetic tool, provides users with information as the catalyst state evolves. However, the state of the art for TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty, including, but not limited to, initial surface coverages, the catalyst zone location, the inert void fraction, and the gas pulse intensity and pulse delay, are not included. For this reason, a framework for quantifying all uncertainty sources present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Herein, two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances, as well as to provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble-based sampling algorithm. This initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a single TAP experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Application of an equation‐oriented framework to formulate and estimate parameters of chemical looping reaction models

Abstract Accurate, predictive reaction models are critical for the design and optimization of chemical looping combustion (CLC) reactors. The formulation and estimation of kinetic parameters for these reaction models using a first‐principles equation‐oriented (EO) approach is particularly beneficial as large amounts of experimental data spanning process‐relevant conditions can be used to estimate parameters in a computationally tractable way. This work demonstrates the application of a novel EO framework to develop reduction reaction kinetic models of an iron‐based CLC oxygen carrier (OC). An optimization problem is formulated to estimate kinetic parameters that provide the best fit to the experimental data. The model predicts the state of the OC with mean square error values of 2.5%–4.4% across the full range of validation data, including multiple reduction cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantifying subsurface parameter and transport uncertainty using surrogate modelling and environmental tracers

Here, we combine physics-based groundwater reactive transport modelling with machine-learning techniques to quantify hydrogeological model and solute transport predictive uncertainties. We train an artificial neural network (ANN) on a dataset of groundwater hydraulic heads and 3 H concentrations generated using a high-fidelity groundwater reactive transport model. Using the trained ANN as a surrogate model to reproduce the input–output response of the high-fidelity reactive transport model, we quantify the posterior distributions of hydrogeological parameters and hydraulic forcing conditions using Markov chain Monte Carlo calibration against field observations of groundwater hydraulic heads and 3 H concentrations. We demonstrate the methodology with a model application that predicts Chlorofluorocarbon-12 (CFC-12) solute transport at a contaminated field site in Wyoming, United States. Our results show that including 3 H observations in the calibration dataset reduced the uncertainty in the estimated permeability field and infiltration rates, compared to calibration against hydraulic heads alone. However, predictive uncertainty quantification shows that CFC-12 transport predictions conditioned to the parameter posterior distributions cannot reproduce the field measurements. We found that calibrating the model to hydraulic head and 3 H observations results in groundwater mean ages that are too large to explain the observed CFC-12 concentrations. The coupling of the physics-based reactive transport model with the machine-learning surrogate model allows us to efficiently quantify model parameter and predictive uncertainties, which is typically computationally intractable using reactive transport models alone.

58 GEOSCIENCES↗
DOE OSTI2021

Simultaneous determination of CKM angle γ and charm mixing parameters

A combination of measurements sensitive to the CP violation angle γ of the Cabibbo-Kobayashi-Maskawa unitarity triangle and to the charm mixing parameters that describe oscillations between D 0 and $ \overline{D} $ 0 mesons is performed. Results from the charm and beauty sectors, based on data collected with the LHCb detector at CERN’s Large Hadron Collider, are combined for the first time. This method provides an improvement on the precision of the charm mixing parameter y by a factor of two with respect to the current world average. The charm mixing parameters are determined to be $ x=\left({0.400}_{-0.053}^{+0.052}\right)\% $ and y = $ \left({0.630}_{-0.030}^{+0.033}\right)\% $. The angle γ is found to be γ = ($ 65.4_{-4.2}^{+3.8} $)° and is the most precise determination from a single experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Sensitive parameter identification and uncertainty quantification for the stability of pipeline conveying fluid

In this study, several uncertainty quantification and sensitivity analysis methods are used to determine the most sensitive geometric and material input parameters of a cantilevered pipeline conveying fluid when uncertainty is introduced to the system at the onset of instability. The full nonlinear equations of motion are modeled using the extended Hamilton’s principle and then discretized using Galerkin’s method. A parametric study is first performed, and the Morris elementary effects are calculated to obtain a preliminary understanding of how the onset speed changes when each parameter is introduced to a ± 5% uncertainty. Then, four different input uncertainty distributions, mainly, uniform and Gaussian distribution, are chosen to investigate how input distributions affect uncertainty in the output. A convergence analysis is used to determine the number of samples needed to maintain simulation accuracy while saving the most computational time. Then, Monte Carlo simulations are run, and the output distributions for each input distribution at ± 1%, ± 3% and ± 5% input uncertainty range are found and discussed. Additionally, the Pearson correlation coefficients are evaluated for different uncertainty ranges. A final Monte Carlo study is performed in which single parameters are held constant while all others still have uncertainty. Overall, the flow speed at the onset of instability is the most sensitive to changes in the outer diameter of the pipe.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Dissolution of Fe in HCl from the Ilmenite Concentrate; Evaluating the Effect of Operating Parameters and Mutual Interactions

Selective HCl dissolution of ilmenite components for obtaining Ti or titanium dioxide (TiO{sub 2}) has been highly recognized due to its advantages, greater environmental friendliness, and simplicity, compared to H{sub 2}SO{sub 4} and Cl{sub 2} methods. The effect of numerous parameters has been studied with the one-factor-at-a-time method. The present study aimed to evaluate the effect of key operation parameters, such as acid-to-solid ratio (A/S: 5 to 20 mL/g), reaction temperature (T: 70 °C to 100 °C), and acid concentration (A pct: 15 to 30 wt pct), on the dissolution of Fe in HCl solution with the minimum Ti losses to the leachate from its abundant, domestic, and low-cost mineral source (Kahnooj ilmenite concentrate) using central composite design–response surface methodology. After 90 minutes of leaching, the Ti/Fe (pct) in terms of dissolved amounts was selected as the process assessment response function. Based on the conducted experimental and statistical analysis, increasing the levels of parameters in the studied domain leads to an increase in Ti/Fe (pct), in the order of A pct > T > A/S. Two statistically significant mutual interactions between A/S-T and T-A pct, with 95 pct confidence level, were revealed for the first time in this study. The optimization strategy was set to the minimization of Ti/Fe (pct) by considering the objective of study and the selected response function. The A/S, T, and A pct were determined to be 5 mL/g, 70 °C, and 15 pct, respectively, for maximum impurity dissolution and minimum Ti loss to the leachate.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of digital fringe projection operational parameters on detecting powder bed defects in additive manufacturing

Additive manufacturing is a technology transforming traditional production timelines. Specifically, metal additive manufacturing (MAM) has been increasingly adopted by a variety of industries, not only to prototype, but also to fulfill full production scale applications with much lower lead times. Like any maturing manufacturing technology, developments in verifying and validating processes are necessary to support continuous growth. Due to the complex nature of MAM, part quality and repeatability remain integral challenges that inhibit further adoption of MAM for critical component production. In this study, we present data taken from a developing in-process monitoring system designed to measure and detect powder bed defects (PBDs) in powder bed fusion MAM systems using surface height maps created with structured light illumination. We showcase the feasibility of the monitoring technique for in-process implementation by detecting streak PBDs with varying severities (height, width) created in a lab environment. We present results of powder bed measurements for varying experimental parameters of the structured light system such as illumination angle, illumination pattern, and number of illuminations. We also present an expression used to determine experimental height noise based on input parameters for PBD detection based on the instrument transfer function of the structured light monitoring system for arbitrary pixel intensity noise contributions. In conclusion, with the results of PBD detection across multiple experimental measurement parameters, we provide a best practices approach to in-process implementation of the monitoring system in powder bed fusion manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of system parameters and geospatial variables on the reliability of residential systems with PV and energy storage

A reliable power supply is the foundation of modern society, enabling technologies used to function within a society. Residential systems are places where the end users directly consume power, enabling technologies to sustain life. With the emergence of behind-the-meter resources, the end-users have some control over power supply reliability. The intermittency and variability of these resources impact residential system reliability. In this work, we study the reliability performance of a grid-supplemented residential system with behind-the-meter Distributed Energy Resources(DER) subject to various system parameters and geospatial variables. We propose a multistate reliability model for the behind-the-meter microinverter-based Photo Voltaic (PV) system and integrated inverter-based energy storage (ES) system. A sequential Monte Carlo method is then presented to evaluate the reliability indices for the residential system with behind-the-meter DERs as the main supply and the grid as the backup. The sequential Monte Carlo method is used to analyze the reliability performance of the residential model at the top 100 populous counties of the United States, where actual load and solar irradiance data at the counties is used. In the analysis, the sensitivity of indices to system parameters such as DER size and the sensitivity of the indices to climate zone and gross horizontal irradiation (GHI), which affects the load conditions and the PV output of the residential system, is performed. The analysis results show that the system parameters and the geospatial variables significantly impact the residential system’s reliability. The insights from this analysis will be of immense value to the distribution system planners to provide zone-specific guidelines for DER system sizing and toward the evolution of utility business models. Finally, the methodology developed can be used to extend the analysis to other locations.

14 SOLAR ENERGY↗
DOE OSTI2025

Rate expressions and kinetic parameters for metal ferrites in relation to applications of fossil fuel conversion to hydrogen: Part 1 of 2

Here, the goal of the present work was to provide the necessary reaction emulation information to enable detailed process simulation of a chemical looping H 2 production system from fossil fuels using CaFe 2 O 4 . This specifically pertained to the necessary kinetic data, reaction model development, and model rate parameters required for reaction emulation in both reducing and oxidizing environments. A logical methodology was defined, which included discretization of the reaction network, establishing a core model for reaction emulation that could be adapted based on the system phenomena, and development of a rate parameter regression tool designed around the core model. An extensive array of data sets was acquired by which parametric regressions were performed. The work presented and tabulated a comprehensive set of rate parameters for the reduction and oxidation reactions of CaFe 2 O 4 and descendent phases of Ca 2 Fe 2 O 5 , FeO, Fe 3 O 4 , Fe, and CaO to emulate reaction behavior in a looping-based process environment. This included direct reduction using CH 4 , H 2 , and CO, and direct oxidation reactions with steam, CO 2 and O 2 . Dynamic equilibrium was quantified for reactions that could utilize H 2 O and CO 2 as soft oxidants to re-saturate lattice oxygen in the depleted structure/phases. The kinetics associated with the oxidative mechanisms with the soft oxidants were quantified and compared to those of the reducing counterparts. The analysis provided critical insight to emulate reactions for a process that seeks to use natural gas (NG) or other fossil fuels as a direct reductant for the end goal of H 2 production.

calcium ferrite oxygen carriers↗
DOE OSTI2021

Prediction of moisture transfer in cement-based materials: Use of a porous network model to access transfer parameters

Knowing the water transport phenomena is fundamental for understanding the durability of cement-based materials. The moisture content within cementitious materials is of primary importance because it has a direct influence on mechanical (shrinkage, creep) and chemical (penetration of aggressive agents) degradation. Many models based on the determination of the transfer properties of the material under study already exist but require fitting of the parameters to find the experimental kinetics. Transfer parameters are generally estimated from the empirical approaches developed for soils by Van Genuchten and the water vapour diffusion reduction factor is often calculated via Millington's semi-empirical model. In this paper, we make a proposal to improve the prediction of moisture transfer, through mechanisms such as drying, capillary imbibition and water vapour permeability in cement-based materials, by using a porous network model to access the transfer parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational assessment of smooth and rough parameter dependence of statistics in chaotic dynamical systems

An assumption of smooth response to small parameter changes, of statistics or long-time averages of a chaotic system, is generally made in the field of sensitivity analysis, and the parametric derivatives of statistical quantities are critically used in science and engineering. In this paper, we propose a numerical procedure to assess the differentiability of statistics with respect to parameters in chaotic systems. Here, we numerically show that the existence of the derivative depends on the Lebesgue integrability of a certain density gradient function, which we define as the derivative of logarithmic SRB density along the unstable manifold. We develop a recursive formula for the density gradient that can be efficiently computed along trajectories, and demonstrate its use in determining the differentiability of statistics. Our numerical procedure is illustrated on low-dimensional chaotic systems whose statistics exhibit both smooth and rough regions in parameter space.

42 ENGINEERING↗
DOE OSTI2022

Calibrating uncertain parameters in melt pool simulations of additive manufacturing

Melt pool scale numerical modeling of additive manufacturing (AM) processes can provide predictive capabilities and theoretical insight into the process-property-structure-performance relationships for AM parts. Despite capabilities of numerical models to solve complex multi-physics problems, it is often important to consider a tradeoff between detailed physics and computational cost. Therefore, sources of uncertainty in both experimental conditions and the parameters needed for modeling require models to be validated against empirical evidence. Here, a method is proposed to calibrate uncertain parameters used in continuum-scale melt pool models for powder bed fusion (PBF) AM. Both a simplified heat transfer model and a heat transfer and fluid flow model were investigated. A surrogate model and Markov chain-based optimization algorithm calibrated melt pool geometry for models within experimental variation of the target melt pool width and depth from the NIST AM-Bench 2018-02 dataset. The melt pool temperature distributions, solidification parameters, and simulated multi-layer solidification microstructures were compared between the two models. Similar results from both models indicate that calibrated, lower fidelity numerical models may be used in place of higher fidelity models to generate melt pool solidification data. Finally, these calibrated models therefore enable lower computational cost melt pool simulations without a noticeable decrease in simulation accuracy for grain-scale microstructure simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simulations of crack extensions in arc-shaped tension specimens of uncharged and hydrogen-charged 21-6-9 austenitic stainless steels using cohesive zone modeling with varying cohesive parameters

Crack extensions in uncharged and hydrogen-charged side-grooved A(T) specimens of conventionally forged 21-6-9 austenitic stainless steels are simulated using the cohesive zone modeling approach. Two-dimensional plane strain finite element analyses with fixed cohesive parameters are first conducted to fit the experimental load-displacement curves. Similar analyses using varying cohesive parameters as functions of the crack extension are then conducted to fit the experimental load-crack extension and crack extension-displacement curves. The computational results with varying cohesive parameters can fit very well the experimental data. The computational results also indicate that the average cohesive energy for the hydrogen-charged A(T) specimen is lower than that for the uncharged A(T) specimen.

42 ENGINEERING↗
DOE OSTI2024

Process parameter translation strategies for variable directed energy deposition spot size using 316L, copper, and Inconel 625

Directed energy deposition (DED) is a form of additive manufacturing available across a variety of laser spot diameter values, often referred to as spot sizes. However, there is no method to easily transfer process parameters across discrete spot sizes, leading to DED process parameters that are equipment specific and not widely applicable. In this study, a strategy is proposed and investigated for five spot sizes that keep the areal energy density constant while varying power, feed rate, and powder flow during the deposition of 316L stainless steel. An assessment of trends in hardness and microstructure is possible due to the novel production of components of a single material across several spot sizes using a single nozzle on a single DED system. The proposed strategy was used to nullify the hardness drop during functional grading of Inconel 625 and pure copper, enabling fabrication of multi-material sample that does not compromise desirable properties. This application shows the value in establishing more efficient process parameter development and understanding spot size influences on geometric and material property flexibility, to enable a more diverse powder-based DED design space and to increase the industry adoption of DED systems.

316L↗