Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Controlled Orientation of Polyconjugated Guest Molecules in Tunable Host Cavities

Linear conjugated guest molecules with high aspect ratios form inclusion compounds with guanidinium organodisulfonate (GDS) host frameworks in which organodisulfonate 'pillars' connect opposing GS sheets to generate lamellar architectures that reflect templating by the guest. Through judicious selection of pillars having adjustable lengths (l{sub S-S}, as measured by the separation between distal sulfur atoms) and guests of various lengths (l{sub g}), the framework architecture can be controlled systematically in a manner that enables regulation of the guest orientation and aggregation in the host framework. Inclusion compounds for which l{sub g}/l{sub S-S} {le} 0.9 exhibit a bilayer architecture with 1-D channels containing guests oriented parallel to the long axis of the pillar. Guests with values of l{sub g} comparable to l{sub S-S}, however, promote the formation of a brick architecture in which the guests and the pillar are arranged in a herringbone motif. Surprisingly, longer guests (l{sub g} = 1.25l{sub S-S}) favor the formation of the bilayer architecture despite their larger volume because the guests are forced to align end-to-end as single-file arrays due to the vertical constraints of the 1-D channels. Bithiophene and biphenyl guests (l{sub g} < l{sub S-S}) are exceptional, promoting bilayer structures in which turnstile rotations of the pillars afford an unusual motif in which the guests are isolated from one another. The ability to synthesize a large family of compounds based on a common supramolecular building block (the GS sheet) permits construction of a structural 'phase diagram' based on two simple molecular parameters, l{sub g} and l{sub S-S}, that can be used to sort the inclusion compounds according to their framework architectures and enable prediction of crystal structures for new host-guest combinations. The effects of these different framework architectures and packing motifs is manifested as bathochromic shifts in the absorption and emission spectra of the guests compared with their spectra in methanol solutions. This behavior is supported by ab initio TDDFT calculations that reproduce the bathochromic shifts associated with the effects of guest-guest and guest-host interactions, combined with conformational constraints imposed on the guest molecules by the rigid host framework.

10 SYNTHETIC FUELS↗

Oriented Morphology and Anisotropic Transport in Uniaxially Stretched Perfluorosulfonate Ionomer Membranes

Relations between morphology and transport sensitively govern proton conductivity in perfluorsulfonate ionomers (PFSIs) and thus determine useful properties of these technologically important materials. In order to understand such relations, we have conducted a broad systematic study of H{sup +}-form PFSI membranes over a range of uniaxial extensions and water uptakes. On the basis of small-angle X-ray scattering (SAXS) and {sup 2}H NMR spectroscopy, uniaxial deformation induces a strong alignment of ionic domains along the stretching direction. We correlate ionic domain orientation to transport using pulsed-field-gradient {sup 1}H NMR measurements of water diffusion coefficients along the three orthogonal membrane directions. Intriguingly, we observe that uniaxial deformation enhances water transport in one direction (parallel-to-draw direction) while reducing it in the other two directions (two orthogonal directions relative to the stretching direction). We evaluate another important transport parameter, proton conductivity, along two orthogonal in-plane directions. In agreement with water diffusion experiments, orientation of ionic channels increases proton conduction along the stretching direction while decreasing it in the perpendicular direction. These findings provide valuable fodder for optimal application of PFSI membranes as well as for the design of next generation polymer electrolyte membranes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Iso-oriented monolayer α-MoO 3 (010) films epitaxially grown on SrTiO 3 (001)

The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In this paper, we demonstrate that iso-oriented α-MoO3 films with as low as single monolayer thickness can be reproducibly grown on SrTiO3(001) substrates by molecular beam epitaxy ( (010)MoO3 || (001)STO, [100]MoO3 || [100]STO or [010]STO) through a self-limiting process. While one in-plane lattice parameter of the MoO3 is very close to that of the SrTiO3 (aMoO3 = 3.96 Å, aSTO = 3.905 Å), the lattice mismatch along other direction is large (~5%, cMoO3 = 3.70 Å), which leads to relaxation as clearly observed from the splitting of streaks in reflection high-energy electron diffraction (RHEED) patterns. A narrow range in the growth temperature is found to be optimal for the growth of monolayer α-MoO3 films. Increasing deposition time will not lead to further increase in thickness, which is explained by a balance between deposition and thermal desorption due to the weak van der Waals force between α-MoO3 layers. Lowering growth temperature after the initial iso-oriented α-MoO3 monolayer leads to thicker α-MoO3(010) films with excellent crystallinity.

Environmental Molecular Sciences Laboratory↗

Substrate orientation dependence of ferromagnetism in (Ga,Mn)As

We describe a comprehensive study of the properties of both ordered and random alloy Ga{sub 1-x}Mn{sub x}As grown on (001), (311), (201), and (110) GaAs substrates. Magnetization measurements show a systematic variation in the Curie temperature with epitaxial orientation in both types of samples, even for the same average Mn concentrations. Electrical characterization and thermal annealing of the random alloy Ga{sub 1-x}Mn{sub x}As samples suggest that the density of As antisite defects depends on the growth surface, providing an extrinsic origin for the observed dependence of Curie temperature on substrate orientation.

36 MATERIALS SCIENCE↗

Stranski-Krastanow growth of (1122)-oriented GaN/AlN quantum dots

Semipolar GaN(1122) deposited on AlN(1122) by plasma-assisted molecular-beam epitaxy can follow the Frank-Van der Merwe or the Stranski-Krastanow growth mode as a function of the Ga/N ratio. N-rich grown GaN relaxes elastically at a critical thickness but the resulting GaN islands present multiple crystallographic orientations. In contrast, after deposition of a few two-dimensional GaN monolayers under Ga-rich conditions, a growth interruption in vacuum induces (1122)-oriented islanding. Applying this latter procedure, we have synthesized GaN/AlN quantum dot superlattices with reduced internal electric field.

36 MATERIALS SCIENCE↗

Growth-Rate Induced Epitaxial Orientation of CeO2 on Al2O3(0001)

High-quality ceria (CeO2) films were grown on sapphire (Al2O3) (0001) substrates using oxygen plasma-assisted molecular beam epitaxy. The epitaxial orientation of the ceria films has been found to be (100) and (111) at low (< 8 Å/min) and higher growth rates (up to ~30 Å/min), respectively. Evidence shows that CeO2 (100) film grows as three-dimensional islands, while CeO2 (111) proceeds with layered growth. Three in-plane domains at 30° to each other are observed in the CeO2 (100), which is attributed to the close match of the oxygen sub-lattices in the film and substrate that has a three-fold symmetry. Molecular dynamic simulations have further confirmed that the CeO2 film retains (100) orientation on the Al2O3 (0001) substrate.

36 MATERIALS SCIENCE↗

Effects of nuclear orientation on fusion and fission process in heavy ion reactions

Effects of nuclear orientation on fission fragment mass distributions in the reaction of {sup 30}Si+{sup 238}U were investigated. The mass distributions showed a Gaussian shape in the above barrier region, having a character of fusion-fission. At the sub-barrier energies, the asymmetric fission component around A{sub L}/A{sub H}{approx_equal}90/178 appears, representing quasifision. The measured evaporation residue cross sections for {sup 30}Si+{sup 238}U in [1] have also suggested the competition between fusion and quasifission at sub-barrier region, whereas the fusion is the main process in the above barrier region. These results suggest an influence of orientation effects of the deformed target nuclei on the reaction. Discussion will be given on the difference in the mass distributions between {sup 30}Si+{sup 238}U and {sup 36}S+{sup 238}U.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impact Of Non-Markovian Effects And Orientation Degree Of Freedom On The Fission Rate And Time

The effect of non-Markovian properties and the orientation degree of freedom on the fission rate and time were studied within the framework of Langevin dynamics. Non-Markovian properties were taken into account on the basis of generalized Langevin equation with exponentially correlated random force. The increase of the fission rate and decrease of the fission time with the growth of the random force correlation time were revealed. Orientation degree of freedom was treated as an overdamped collective coordinate. The inclusion of this coordinate into analysis leads to the longer mean fission time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Anisotropy and crystal orientation of silicon--application to the modeling of a bent mirror

Matrix formula and MATLAB algorithm are proposed to calculate the stiffness coefficient matrix C, the Young's modulus, shear modulus and Poisson ratio for the silicon crystal in any orientation. Results for Si(110) and Si(311) are given as an example. The anisotropic material properties of the silicon have been used in the mirror width profile optimization for the nano-imaging end-station ID22NI at the ESRF. As the Si(110) is used as the substrate of this multilayer coated KB mirror, the silicon crystal axis [0 0 1] is proposed to orient to the mirror axis. This is the case to have low stress in the mirror and low bending forces from actuators.

36 MATERIALS SCIENCE↗

Dependence of crystal orientation and bandgap on substrate temperature of molecular-beam epitaxy grown InN on bare Al{sub 2}O{sub 3} (0001)

The issue of variable bandgap values for InN films grown on c-sapphire has been addressed in this work. {alpha}-InN films have been deposited in nitrogen rich condition at different substrate temperatures on bare Al{sub 2}O{sub 3} (0001) by plasma assisted molecular beam epitaxy (PA-MBE). The results of several complementary characterization techniques show that single crystalline wurtzite InN is formed, but their orientation depends on the substrate temperature. The bandgap measured on these samples (1.78 eV) is explained by Moss-Burstein shift on these degenerately n-doped samples. Our results discount effects of crystal orientation, presence of oxygen at grain boundaries and In/N stoichiometry as factors that influence the measured band-gap values.

36 MATERIALS SCIENCE↗

Control of the azimuthal orientation of grains in polycrystalline Si films

Multi-directional ion beam irradiation is applied to control the crystal orientation of Si thin films during growth via plasma-enhanced chemical vapor deposition. The primary ion beam is generated by electron cyclotron resonance using an SiH{sub 4}/H{sub 2} mixture, and the auxiliary beam is obtained by redirecting a portion of the primary beam with a metal reflector. These two beams simultaneously hit the surface of the growing film from different directions. With this arrangement, we succeeded in controlling the orientation of the growth of deposited Si grains in virtually the same direction.

36 MATERIALS SCIENCE↗

In situ control of As dimer orientation on Ge(100) surfaces

We investigated the preparation of single domain Ge(100):As surfaces in a metal-organic vapor phase epitaxy reactor. In situ reflection anisotropy spectra (RAS) of vicinal substrates change when arsenic is supplied either by tertiarybutylarsine or by background As{sub 4} during annealing. Low energy electron diffraction shows mutually perpendicular orientations of dimers, scanning tunneling microscopy reveals distinct differences in the step structure, and x-ray photoelectron spectroscopy confirms differences in the As coverage of the Ge(100):As samples. Their RAS signals consist of contributions related to As dimer orientation and to step structure, enabling precise in situ control over preparation of single domain Ge(100):As surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orientation-dependent piezoelectric properties in lead-free epitaxial 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} thin films

Orientation-engineered 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (BZT-BCT) thin films were deposited on La{sub 0.7}Sr{sub 0.3}MnO{sub 3}-coated SrTiO{sub 3} single-crystalline (001), (110), and (111) substrates by off-axis radio-frequency magnetron sputtering. X-ray diffraction confirmed a highly epitaxial growth of all the as-deposited films. It is believed the strong orientation dependence of ferroelectric and piezoelectric properties on the films is attributed to the relative alignment of crystallites and spontaneous polarization vector. The optimal ferroelectric response lies in the [001] direction, whereas a comparatively large effective piezoelectric coefficient d{sub 33,eff} of 100.1 ± 5 pm/V was attained in [111] BZT-BCT thin film, suggesting its potential application for high-performance lead-free piezoelectric devices.

36 MATERIALS SCIENCE↗

Determination of crystal grain orientations by optical microscopy at textured surfaces

In this contribution, a new method to determine the crystal orientation with the example of chemical treated silicon wafers by means of optical microscopy has been demonstrated. The introduced procedure represents an easy method to obtain all relevant parameters to describe the crystal structure of the investigated material, i.e., the crystal grain orientation and the grain boundary character. The chemical treatment is a standard mono-texture for solar cells, well known in the solar industry. In general, this concept can also be applied to other crystalline materials, i.e., GaAs, SiC, etc., the only thing that needs to be adjusted is the texturing method to reveal specific crystal planes and the calculation model. In conclusion, an application of this method is shown with the example of the defect classification of recombination active defects in mc-Si solar cell. The introduced method demonstrates a simple and quick opportunity to improve the crystallization process and the quality of electronic devices by means of an optical microscope and a chemical treatment of the material.

14 SOLAR ENERGY↗

Relationship between open-circuit voltage in Cu(In,Ga)Se{sub 2} solar cell and peak position of (220/204) preferred orientation near its absorber surface

Cu(In,Ga)Se{sub 2} (CIGS) absorbers with various Ga/III, Ga/(In+Ga), profiles are prepared by the so-called “multi-layer precursor method” using multi-layer co-evaporation of material sources. It is revealed that open-circuit voltage (V{sub OC}) of CIGS solar cell is primarily dependent on averaged Ga/III near the surface of its absorber. This averaged Ga/III is well predicted by peak position of (220/204) preferred orientation of CIGS film near its surface investigated by glancing-incidence X-ray diffraction with 0.1° incident angle. Finally, the peak position of (220/204) preferred orientation is proposed as a measure of V{sub OC} before solar cell fabrication.

36 MATERIALS SCIENCE↗

Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered Sc{sub x}Al{sub 1−x}N thin films

Doping of wurtzite aluminium nitride (AlN) with scandium (Sc) significantly enhances the piezoelectric properties of AlN. Sc{sub x}Al{sub 1−x}N thin films with different Sc concentrations (x = 0 to 0.15) were deposited by DC reactive magnetron sputtering. Infrared (IR) absorbance spectroscopy was applied to investigate the Sc concentration dependent shift of the IR active modes E{sub 1}(TO) and A{sub 1}(TO). These results are compared to ab initio simulations, being in excellent agreement with the experimental findings. In addition, IR spectroscopy is established as an economical and fast method to distinguish between thin films with a high degree of c-axis orientation and those exhibiting mixed orientations.

36 MATERIALS SCIENCE↗

Orientation-controlled nonepitaxial L1{sub 0} FePt thin films

We report an orientation-controlled FePt thin films grown nonexpitaxially on oxidized Si substrates without using any underlayers. After 700 °C annealing, the FePt single layer with thickness less than 10 nm shows good (001) texture and perpendicular anisotropy. The scanning electron microscope images indicate that these films are composed of isolated islands. For the films thicker than 20 nm, the films become continuous and (111) orientation appears. The transition of film texture relates to the change of morphology of the films. Finally, a theoretical mode based on minimizing surface energy is proposed to explain the texture variation in the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of polycrystalline Cu{sub 2}ZnSnSe{sub 4} layers with strongly preferential grain orientation via selenization of Sn/Cu/ZnSe(001)/GaAs(001) structures

We report on a simple approach for the fabrication of polycrystalline Cu{sub 2}ZnSnSe{sub 4} films on GaAs with strongly preferential grain orientation. Such layers are important for both fundamental spectroscopic investigations as well as studies of the impact of grain boundaries on the performance of solar cells. Cu{sub 2}ZnSnSe{sub 4} (CZTSe) layers were fabricated by growing a Sn/Cu/ZnSe(001) stack on a GaAs(001) substrate in a molecular-beam epitaxy system followed by selenization in a tube furnace. Raman spectroscopy as well as X-ray diffraction measurements combined with a microstructural investigation indicate the presence of the kesterite phase. Further, X-ray analysis such as rocking curves and ϕ-scans proves a preferential grain orientation of the obtained CZTSe films in all three dimensions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗