Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimization for fusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Configuration analysis and optimization on multipolar Galatea trap

Multipolar Galatea magnetic trap simulation model was established with the finite element simulation software COMSOL Multiphysics. Analyses about the magnetic section configuration show that better magnetic configuration should make more plasma stay in the weak magnetic field rather than the annular magnetic shell field. Then an optimization model was established with axial electromagnetic force, weak magnetic field area and average magnetic mirror ratio as the optimization goals and with the currents of myxines as design variables. Select appropriate weight coefficients and get optimization results by applying genetic algorithm. Results show that the superiority of the target value of typical application parameters, including the average magnetic mirror can reduce more than 5%, the weak magnetic field area can increase at least 65%, at the same time, axial electromagnetic force acting on the outer myxines can be reduced to less than 50 N. Finally, the results were proved by COMSOL Multiphysics and the results proved the optimized magnetic trap configuration with more plasma in the weak magnetic field can reduce the plasma diffusion velocity and is more conducive for the constraint of plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical emission spectroscopy as a tool for studying, optimizing, and monitoring plasma-assisted atomic layer deposition processes

In this note it is demonstrated that optical emission spectroscopy (OES) is an easy-to-implement and valuable tool to study, optimize, and monitor thin film growth by plasma-assisted atomic layer deposition (ALD). The species in the plasma can be identified through the analysis of the light emitted by the plasma. OES provides therefore information on the reactant species delivered to the surface by the plasma but it also yields unique insight into the surface reaction products and, as a consequence, on the reaction mechanisms of the deposition process. Time-resolved measurements reveal information about the amount of precursor dosing and length of plasma exposure needed to saturate the self-limiting half reactions, which is useful for the optimization of the ALD process. Furthermore, time-resolved OES can also be used as an easy-to-implement process monitoring tool for plasma-assisted ALD processes on production equipment; for example, to monitor reactor wall conditions or to detect process faults in real time.

36 MATERIALS SCIENCE↗

Low-Activation Joining of SiC/SiC Composites for Fusion Applications

Abstract Research at PNNL has been directed at high-strength, low-activation joints using solid-state displacement reactions. This paper reports on further development and optimization of displacement reaction joints for the TITAN collaboration. The results reveal that fully dense and high-quality joints between SiC-composite bars are fabricated at 1623K to 1723K using 30 MPa pressure in purified argon atmospheres. Scanning electron micrographs reveal typical interpenetrating phase microstructures in the joints, which are about 10 µm thick. Blocky SiC particles are observed to nucleate preferentially at the SiC-joint interface but are more plate-like within the joint. X-ray spectroscopy reveals a uniform distribution of constituent elements consistent with the interpenetrating phases.

Henager, Charles H.↗

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗

Mucosal vaccination by adenoviruses displaying reovirus sigma 1

We developed adenovirus serotype 5 (Ad5) vectors displaying the sigma 1 protein from reovirus as mucosal vaccines. Ad5-sigma retargets to JAM-1 and sialic acid, but has 40-fold reduced gene delivery when compared to Ad5. While weaker at transduction, Ad5-sigma generates stronger T cell responses than Ad5 when used for mucosal immunization. In this work, new Ad5-fiber-sigma vectors were generated by varying the number of fiber β-spiral shaft repeats (R) between the fiber tail and sigma. Increasing chimera length led to decreasing insertion of these proteinsAd5 virions. Ad-R3 and R14 vectors effectively targeted JAM-1 in vitro while R20 did not. When wereused to immunize mice by the intranasal route, Ad5-R3-sigma produced higher serum and vaginal antibody responses than Ad5. These data suggest optimized Ad-sigma vectors may be useful vectors for mucosal vaccination. - Highlights: • Constructed adenoviruses (Ads) displaying different reovirus sigma 1 fusion proteins. • Progressively longer chimeras were more poorly encapsidated onto Ad virions. • Ad5-R3-sigma mediated better systemic and mucosal immune responses than Ad5.

60 APPLIED LIFE SCIENCES↗

Surface Segregation of Liquid Metal Plasma-Facing Component Alloys: A ReaxFF Investigation

Engineering liquid metal alloys offers a transformative pathway for plasma-facing components by enabling chemically tailored surfaces that can simultaneously optimize plasma-material interactions, reduce divertor heat flux, and enhance core plasma confinement, thereby advancing the commercial viability of nuclear fusion power plants. This study, employing an atomistic simulation approach, provides direct evidence that incorporating nonmetal surface-active agents (such as O and H, or their combination) enables strong surface segregation. This capability makes tin−aluminum (Sn−Al) and tin−lithium (Sn−Li) alloys, with suitable compositions, good candidates for PFC applications. Specifically, the presence of low-Z solutes (Li, Al) leads to preferential surface enrichment, which imparts low-Z sputtering characteristics, while the Sn solvent maintains thermophysical stability. To systematically examine this behavior, we developed a ReaxFF force field spanning the full Sn/Al/Li/O/H chemistry, validated it against formation energies and elastic constants, and applied it in reactive molecular dynamics simulations at fusion-relevant temperatures. We also introduced an overlapbased segregation index that captures interfacial compositional separation directly from atomistic density distributions. Here, this metric reveals a clear hierarchy of segregation regimes and provides a unified view across all systems studied. Together, these findings establish a mechanistic link between nonmetal chemistry and interfacial structure, providing a predictive framework for designing self-adaptive, low-sputtering liquid metal alloys for fusion applications.

Alloys↗

Driving toroidally asymmetric current through the tokamak scrape-off layer. I. Potential for edge localized mode suppression

A potential technique for suppressing edge localized modes is theoretically analyzed. Recent experiments have shown that externally generated resonant magnetic perturbations (RMPs) can stabilize edge localized modes (ELMs) by modifying the density profile [T. E. Evans et al., Nat. Phys. 2, 419 (2006); Y. Liang et al., Phys. Rev. Lett. 98, 265004 (2007)]. Driving toroidally asymmetric current internally through the scrape-off layer (SOL) plasma itself can also generate RMPs that are close to the required threshold for ELM control. Ion saturation current densities can be achieved by producing potential differences on the order of the electron temperature. Although the threshold is uncertain in future devices, if driven coherently through the SOL, the upper limit for the resulting perturbation field would exceed the present experimental threshold. This analysis provides the tools required for estimating the magnitude of the coherent SOL current and RMP generated via toroidally asymmetric biasing of the target. Flux expansion increases the perturbation near the X-point, while phase interference due to the shearing of field lines near the X-point reduces the amplitude of the effective SOL perturbation and makes the result sensitive to both toroidal mode number n and the phasing at the target plate. If the current density driven at the target plate decays radially, the amplitude over the useful coherence width of the current profile will be reduced. The RMP can still exceed the present threshold at low n if the radial location and width of the biasing region are optimally chosen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reducing turbulent transport in toroidal configurations via shaping

Recent progress in reducing turbulent transport in stellarators and tokamaks by 3D shaping using a stellarator optimization code in conjunction with a gyrokinetic code is presented. The original applications of the method focused on ion temperature gradient transport in a quasi-axisymmetric stellarator design. Here, an examination both of other turbulence channels and other starting configurations is initiated. It is found that the designs evolved for transport from ion temperature gradient turbulence also display reduced transport from other transport channels whose modes are also stabilized by improved curvature, such as electron temperature gradient and ballooning modes. The optimizer is also applied to evolving from a tokamak, finding appreciable turbulence reduction for these devices as well. From these studies, improved understanding is obtained of why the deformations found by the optimizer are beneficial, and these deformations are related to earlier theoretical work in both stellarators and tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion temperature gradient turbulence modification in quasi-axisymmetry

The large flexibility of the proposed QUASAR facility is leveraged in order to explore the effect of magnetic shear on adiabatic Ion Temperature Gradient (ITG) turbulence. The QUASAR facility is a reimagining of the National Compact Stellarator Experiment utilizing and expanding upon the already constructed coil set. Recent work using fixed boundary optimization of the LI383 equilibrium (upon which QUASAR is based) has suggested possible improvements to ITG turbulence. In this work, a different approach is taken, wherein a series of self-consistent free boundary VMEC equilibria are developed for QUASAR. These equilibria assume temperature and density profiles consistent with 2% beta and ohmic current drive. In each configuration, the toroidal field coils are energized to different values and the STELLOPT code is used to vary the modular coil current and net toroidal current. The edge value of rotational transform is targeted in the optimization, producing a magnetic shear scan. All these configurations share similar neoclassical transport levels, while nonlinear GENE flux tube simulations show up to a factor of four change in adiabatic ITG turbulence at various radii. Comparisons of proxy functions and linear flux tube runs are also made. This work highlights the capability of the QUASAR experiment as a tool to explore transport in 3D magnetic fields and the possibility of the further improvements to stellarators through optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Monte Carlo technique to model performance of streak camera-based time-resolving x-ray spectrometers

A Monte Carlo technique has been developed to simulate the expected signal and the statistical noise of x-ray spectrometers that use streak cameras to achieve the time resolution required for ultrafast diagnostics of laser-generated plasmas. The technique accounts for statistics from both the photons incident on the streak camera’s photocathode and the electrons emitted by the photocathode travelling through the camera’s electron optics to the sensor. We use the technique to optimize the design of a spectrometer, which deduces the temporal history of electron temperature of the hotspot in an inertial confinement fusion implosion from its hard x-ray continuum emission spectra. The technique is general enough to be applied to any instrument using an x-ray streak camera.

Stoupin, S. (ORCID:0000000226225270)↗

Computation-Efficient Algorithm for Distributed Feedback Optimization of Distribution Grids

Feedback-based optimization algorithms use real-time measurements to update the optimal control for the underlying system which may not be fully identified. Recently, we have developed a distributed feedback-based algorithm [1] that avoids the requirement of fast communication between central computing and local actuator/sensor agents. This paper extends the work by greatly reducing the number of copies of variables involved in the distributed feedback-based algorithm, which results in faster convergence and lower communication requirement. The main idea is to leverage the specific structural properties of the admittance matrix for distribution systems with tree network topology. We also show the effectiveness of the proposed algorithm in simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Developing a dissimilar metal foil-to-substrate resistance welding process.

Materials changes occurring upon redesign caused redevelopment of the multiple spot resistance weld procedure employed to join a 23 micrometer thick foil of 15-7PH to a thick substrate and (at a separate location) a second, smaller thermal mass substrate. Both substrates were 304L. To avoid foil wrinkling, minimal heat input was used. The foil/thick substrate weld was solid-state, though the foil/small substrate weld was not. Metallographic evidence indicated occasional separation of the solid-state weld, hence a fusion weld was desired at both locations. In the redesign, a Co-Cr-Fe-Ni alloy was substituted for the foil, and a Ni-Cr-Mo alloy was evaluated for the small substrate. Both materials are substantially more resistive than their predecessors. This study reports development of weld schedules to accommodate the changes, yet achieve the fusion weld goal. Thermal analysis was employed to understand the effects caused by the various weld schedule parameters, and guide their optimization.

36 MATERIALS SCIENCE↗

Evaluating the Use of Foundational Chemical Language Models in Multimodal Graph Fusion

Rapid and accurate prediction of the physicochemical properties of molecules given their structures remains a key challenge in cheminformatics. Machine learning approaches offer high-throughput options, but the optimality of inductive biases and data representations are up for debate. For example, BERT-based masked language models (MLMs) can be trained in a self-supervised way on hundreds of millions to billions of readily available SMILES strings. Another option is graph neural networks (GNNs), which can operate directly on molecular structures. Yet, generating accurate molecular geometry is computationally expensive, leading to a relative scarcity in data compared to SMILES strings. It is attractive to combine these two paradigms by pre-training an LM on a large corpus of SMILES strings and embedding these representation into a geometric graph neural network. Despite the promise of such an approach, and contrary to previous studies, we find mixed results with the combination of the LMs and GNNs on several molecule datasets. In particular, we found evidence for improvement on the FreeSolv and QM7 benchmarks, but degraded performance on the ESOL, LIPO and QM9 datasets compared to a GNN baseline.

Francel, Collin [University of Alabama]↗

Driving toroidally asymmetric current through the tokamak scrape-off layer, Part I: Potential for ELM suppression

A potential technique for suppressing edge localized magnetohydrodynamic instabilities (ELMs) is theoretically analyzed. Recent experiments have shown that externally generated resonant magnetic perturbations (RMPs) can stabilize ELMs by modifying the density profile [T. E. Evans, et al., Nature Phys. 2, 419 (2006); Y. Liang, et al., Phys. Rev. Lett. 98, 265004 (2007)]. Driving toroidally asymmetric current internally, through the scrape-off layer (SOL) plasma itself, can also generate RMPs that are close to the required threshold for ELM control. The limiting ion saturation current densities can be achieved by producing potential differences on the order of the electron temperature. Although the threshold is uncertain in future devices, if driven coherently though the SOL, the upper limit for the resulting field would exceed the present experimental threshold. This analysis provides the tools required for estimating the magnitude of the coherent SOL current and RMP generated via toroidally asymmetric biasing of the target. Flux expansion increases the RMP near the X-point, while phase interference due to the shearing of field lines near the X-point reduces the amplitude of the effective SOL perturbation and makes the result sensitive to both toroidal mode number n and the radial coherence width of the biasing region. If the limiting current density decays rapidly enough radially, both the width and the amplitude of the current density drawn from the target will be reduced. The RMP can still exceed the present threshold at low n if the radial location and width of the biasing region are optimally chosen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tunable and collimated terahertz radiation generation by femtosecond laser pulses

A mechanism is proposed for the generation of tunable terahertz (THz) radiation under the application of two femtosecond laser pulses and an external magnetic field, where quick tunnel ionization is achieved that leads to higher plasma density evolution and large residual current for the efficient THz radiation generation. With the optimization of magnetic field, phase difference, and amplitudes of lasers' fields, a THz source can be obtained with tunable frequency and power along with a control on the direction of radiation emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Making & Breaking the Rules for DED Design

Design for Additive Manufacturing (DfAM) is widely used to describe design activities and guidelines employed in the creation of Additively Manufactured (AM) parts. Basic design rules for widely adopted processes like Powder Bed Fusion (PBF) are relatively understood including material performance, part size constraints, self-supporting angles, overhangs, wall thicknesses, and feature resolution. Complexity is often inherent with PBF using organically inspired solutions through generative design and topology optimization software to create designs that often cannot be realized via traditional manufacturing processes. The design rules for Directed Energy Deposition (DED) are less well known, and, in some cases, the lack of understanding is likely inhibiting broader application of the various DED processes. This presentation covers key design rules for DED fusion processes and elucidates opportunities like multi-material deposition and build approaches ranging from basic features to complex large-scale parts. Complementary to the opportunistic characteristics of DfAM for DED, Manufacture for AM (MfAM) encompasses the restrictive aspects of the manufacturing lifecycle with limitations due to bead width and wall thickness, self-supporting angles, surface texture, microstructural evolution, and residual stresses. AM enabled part design must always consider the entire value chain starting with incoming feedstock (e.g. plate, wire, or powder) and progressing through the printing process, post-processing (e.g. machining, inspection), and final system assembly. Key considerations, like the tradeoffs between feature resolution and build rate, for process and part selection and economic assessments will be discussed as DED is often traded against other AM processes. After highlighting typical DED design rules, we will also show how some of those rules can be broken via use cases and part designs that span the full spectrum of DED processes with examples of various DED part designs.

Additive Manufacturing↗

Implementation of focal zooming on the Nike KrF laser

In direct drive inertial confinement laser fusion, a pellet containing D-T fuel is imploded by ablation arising from absorption of laser energy at its outer surface. For optimal coupling, the focal spot of the laser would continuously decrease to match the reduction in the pellet's diameter, thereby minimizing wasted energy. A krypton-fluoride laser ({lambda}= 248 nm) that incorporates beam smoothing by induced spatial incoherence has the ability to produce a high quality focal profile whose diameter varies with time, a property known as focal zooming. A two-stage focal zoom has been demonstrated on the Nike laser at the Naval Research Laboratory. In the experiment, a 4.4 ns laser pulse was created in which the on-target focal spot diameter was 1.3 mm (full width at half maximum) for the first 2.4 ns and 0.28 mm for the final 2 ns. These two diameters appear in time-integrated focal plane equivalent images taken at several locations in the amplification chain. Eight of the zoomed output beams were overlapped on a 60 {mu}m thick planar polystyrene target. Time resolved images of self-emission from the rear of the target show the separate shocks launched by the two corresponding laser focal diameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On Reproducibility of Collective Acceleration of Protons in a Plasma-Anode Diode System

The article deals with the investigation of the conditions of reproducibility of the results of collective acceleration of protons in a high-current relativistic electron beam of nanosecond duration passing through a plasma bunch. A quantitative criterion of reproducibility in the system of an anode with a dielectric insert and a cylindrical cathode was the neutron yield in a nuclear reaction with the threshold about 2 MeV, which was measured by a silver-activated detector after each operation of the accelerator. Generation of an azimuthally-homogeneous electron beam and plasma in the area of the dielectric insert on the anode and the use of lenses in the region of electron beam drift resulted in the stabilization of the accelerating process. After optimization, the neutron yield scatter in a series of 30 pulses was at the level ±5% of the average value, which corresponded to the accelerated proton energy scatter ±3%. The conditions of best reproducibility coincided with those where the main group of protons reached their maximum values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗