Roll-To-Roll Friendly Solution-Processing of Ultrathin, Sintered CdTe Nanocrystal Photovoltaics
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “nanoscience”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Templated Mesoporous Silica Outer Shell for Controlled Silver Release of a Magnetically Recoverable and Reusable Nanocomposite for Water Disinfection
Here, we encapsulated Fe 3 O 4 @SiO 2 @Ag (MS-Ag), a bifunctional magnetic silver core–shell structure, with an outer mesoporous silica (mS) shell to form an Fe 3 O 4 @SiO 2 @ 2 Ag@mSiO 2 (MS-Ag-mS) nanocomposite using a cationic CTAB (cetyltrimethylammonium bromide) micelle templating strategy. The mS shell acts as protection to slow down the oxidation and detachment of the AgNPs and incorporates channels to control the release of antimicrobial Ag + ions. Results of TEM, STEM, HRSEM, EDS, BET, and FTIR showed the successful formation of the mS shells on MS-Ag aggregates 50–400 nm in size with highly uniform pores ~4 nm in diameter that were separated by silica walls ~2 nm thick. Additionally, the mS shell thickness was tuned to demonstrate controlled Ag + release; an increase in shell thickness resulted in an increased path length required for Ag + ions to travel out of the shell, reducing MS-Ag-mS’ ability to inhibit E. coli growth as illustrated by the inhibition zone results. Through a shaking test, the MS-Ag-mS nanocomposite was shown to eradicate 99.99+% of a suspension of E. coli at 1 × 10 6 CFU/mL with a silver release of less than 0.1 ppb, well under the EPA recommendation of 0.1 ppm. This high biocidal efficiency with minimal silver leach is ascribed to the nanocomposite’s mS shell surface characteristics, including having hydroxyl groups and possessing a high degree of structural periodicity at the nanoscale or “smoothness” that encourages association with bacteria and retains high Ag + concentration on its surface and in its close proximity. Furthermore, the nanocomposite demonstrated consistent antimicrobial performance and silver release levels over multiple repeated uses (after being recovered magnetically because of the oxidation-resistant silica-coated magnetic Fe 3 O 4 core). It also proved effective at killing all microbes from Long Island Sound surface water. The described MS-Ag-mS nanocomposite is highly synergistic, easy to prepare, and readily recoverable and reusable and offers structural tunability affecting the bioavailability of Ag + , making it excellent for water disinfection that will find wide applications.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Hydrophobic Molecule Monolayer Brush-Tethered Zinc Anodes for Aqueous Zinc Batteries
Aqueous zinc batteries are of great interest as a rechargeable energy storage system, particularly owing to the low cost and high safety of aqueous electrolytes, as well as the high capacity of zinc anodes. Unfortunately, the wide commercialization of aqueous zinc batteries is impeded by the irreversible water reduction and irregular zinc evolution issues on the anode side. Hereby, a hydrophobic and ultrathin polystyrene molecule brush layer is tethered onto the surface of zinc metal anodes to tackle the above limitations. Here, experimental investigations reveal that the waterproof artificial layer can sustain fast interfacial ionic transportation, minimize hydrogen evolution, and smoothen Zn deposition, thus conferring enhanced electrochemical performance to the as-protected Zn anode in both symmetric Zn//Zn cells and Zn//LiV 3 O 8 full cells.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Hierarchical, Self-Assembled Metasurfaces via Exposure-Controlled Reflow of Block Copolymer-Derived Nanopatterns
Here, nanopatterning for the fabrication of optical metasurfaces entails a need for high-resolution approaches like electron beam lithography that cannot be readily scaled beyond prototyping demonstrations. Block copolymer thin film self-assembly offers an attractive alternative for producing periodic nanopatterns across large areas, yet the pattern feature sizes are fixed by the polymer molecular weight and composition. Here, a general strategy is reported that overcomes the limitation of fixed feature size by treating the copolymer thin film as a hierarchical resist, in which the nanoscale pattern motif is defined by self-assembly. Feature sizes can then be tuned by thermal reflow controlled locally by irradiative crosslinking or chemical alteration using lithographic ultraviolet light or electron beam exposure. Using blends of polystyrene-block-poly(methylmethacrylate) (PS-b-PMMA) with PS and PMMA homopolymer, we demonstrate both self-assembled PS grating and hexagonal hole patterns; exposure-controlled reflow is then used to reduce hole diameter by as much as 50% or increase PS grating linewidth by more than 180%. Transferring these nanopatterns, or their inverse obtained by a lift-off approach, into silicon yields structural colors that may be prescriptively controlled based on nanoscale feature size. Furthermore, patterned exposure enables area-selective feature size control, yielding uniform structural color patterns across centimeter square areas. Electron beam lithography is also used to show that the lithographic resolution of this selective-area control can be extended to the nanoscale dimensions of the self-assembled features. The exposure-controlled reflow approach demonstrated here takes a pivotal step towards fabricating complex, hierarchical optical metasurfaces using scalable self-assembly methods.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Roll-to-Roll, Dual-Layer Slot Die Coating of Chitin and Cellulose Oxygen Barrier Films for Renewable Packaging
Cellulose and chitin are the two most abundant naturally produced biopolymers and are being extensively studied as candidates for renewable oxygen barrier films used in packaging. It has been shown that bilayers formed from cellulose nanocrystals (CNCs) and chitin nanofibers (ChNFs) exhibit oxygen barrier properties similar to polyethylene terephthalate (PET). However, this prior work explored only coating each layer individually in sequence through techniques such as spray coating. Here, we demonstrate the viability of dual-layer slot die coating of CNC/ChNF bilayers onto cellulose acetate (CA) substrates. The dual-layer slot die method enables significantly lower oxygen permeability versus spray coating while using a roll-to-roll system that applies the bilayer in a single pass. This work discusses suspension properties, wetting, and drying conditions required to achieve well-controlled ChNF/CNC bilayers. Spray-coated bilayer films were on average 25% thinner than the dual-layer bilayer film; however, the thickness-normalized oxygen permeability (OP) of the dual-layer-coated ChNF/CNC bilayer film on CA was 20 times better than that of the spray-coated bilayers. Additionally, it has been shown that ChNF contributes to the wetting and barrier properties. Values of OP for the slot die-coated bilayers under optimized drying conditions were as low as 1.2 cm 3 ∙μm∙m -2 ∙d -1 ∙kPa -1 , corresponding to a normalized oxygen transmission rate of 0.32 cm 3 ∙m -2 ∙d -1 at 23 °C and 50% relative humidity. It is also noted that the adhesive properties of the dual-layer coating are also improved when films are air-dried and that ChNF contributes to the wetting and barrier properties.
09 BIOMASS FUELS↗
One-Step Ligand-Exchange Method to Produce Quantum Dot–DNA Conjugates for DNA-Directed Self-Assembly
To address the current challenges in making bright, stable, and small DNA-functionalized quantum dots (QDs), we have developed a one-step ligand-exchange method to produce QD–DNA conjugates from commonly available hydrophobic QDs. We show that by systematically adjusting the reaction conditions such as ligand-to-nanoparticle molar ratio, pH, and solvent composition, stable and highly photoluminescent water-soluble QD–DNA conjugates with relatively high ligand loadings can be produced. Moreover, by site specifically binding these QD–DNA conjugates to a DNA origami template, we demonstrate that these bioconjugates have sufficient colloidal stability for DNA-directed self-assembly. Fluorescence quenching by an adjacent gold nanoparticle (AuNP) was demonstrated. Such QD–AuNP dimers may serve as biosensors with improved sensitivity and reproducibility. Furthermore, our simple method can facilitate the assembly of QDs into more complex superlattices and discrete clusters that may enable novel photophysical properties.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Effects of Surface Hydrophobicity on Catalytic Transfer Hydrogenation of Styrene with Formic Acid in a Biphasic Mixture
Transfer hydrogenation (TH) of unsaturated hydrocarbons with formic acid (FA) is an attractive processing pathway for the reduction of lignocellulosic pyrolysis oils. The low solubility of hydrophobic bio-oil species in water and FA in oil necessitates the use of a biphasic system as the reaction environment. Here, we report the effects of Pd/silica catalyst surface wettability on the TH reaction rate. Modification of the surface with short chain (C1–C4) alkyl silanes resulted in an increase in the reaction rate as compared to the unmodified catalyst. In contrast, modification of the surface with sulfonate (hydrophilic) and C18 alkyl silanes (hydrophobic) resulted in a decrease in the reaction rate as compared to the unmodified catalyst. Here, the results are discussed in terms of the catalyst interfacial activity and relative affinity of the reagents to the Pd active sites. An observed change in the apparent reaction order in styrene for a hydrophilic catalyst suggests that changing catalyst surface wettability from hydrophilic to hydrophobic resulted in a switch from a transport-limited to a kinetic-limited reaction regime.
09 BIOMASS FUELS↗
Electrochemical Sodiation Mechanism in Magnetite Nanoparticle-Based Anodes: Understanding of Nanoionics-Based Sodium Ion Storage Behavior of Fe 3 O 4
We report electrochemical ion storage behaviors of Fe 3 O 4 nanoparticles, as a representative transition metal oxide for an environmentally benign and low-cost anode for a sodium-ion battery, are thoroughly investigated through a combination of electrochemical analysis and diagnostics of Fe 3 O 4 electrode cells, X-ray-based and spectroscopic analysis of material structure evolution as functions of depth of discharge (DoD) and state of charge (SoC), and first principle modeling. The gravimetric capacity is found to be 50 mA h/g for bulk Fe 3 O 4 (50 nm average crystallite size) and 100 mA h/g--about a tenth of the theoretical prediction for complete conversion--for Fe 3 O 4 nanoparticles (8.7 nm average particle size), respectively. A fundamental and mechanistic study of material evolution as functions of DoD and SoC shows that Fe 3 O 4 does not allow electrochemical incorporation of Na + ions into the empty cation positions of the inverse spinel structure, leading to our assertion that electrochemical intercalation of Na + ions to conversion of the Fe 3 O 4 anode in sodium-ion batteries is nonviable. A density functional theory investigation points to the impracticality of the intercalation of Na + ions into Fe 3 O 4 and further validates our experimental findings. We propose several possible mechanisms corresponding to the observed low capacity, including formation of solid electrolyte interphases with unfavorable properties and adsorption of Na + ions onto surfaces of nanoparticles and/or at heterointerfaces in Fe 3 O 4 composite electrodes in a NaPF 6 -based electrolyte system.
25 ENERGY STORAGE↗
Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes
Large-scale production of vertically aligned single-walled carbon nanotubes (VA-SWCNTs) on metal foils promises to enable technological advancements in many fields, from functional composites to energy storage to thermal interfaces. In this work, we demonstrate growth of high-quality (G/D > 6, average diameters ~ 2–3 nm, densities > 10 12 cm –2 ) VA-SWCNTs on Inconel metal for use as a lithium-ion battery (LIB) anode. Scale-up of SWCNT growth on Inconel 625 to 100 cm 2 exhibits nearly invariant CNT structural properties, even when synthesis is performed near atmospheric pressure, and this robustness is attributed to a growth kinetic regime dominated by the carbon precursor diffusion in the bulk gas mixture. SWCNT forests produced on large-area metal substrates at close to atmospheric pressure possess a combination of structural features that are among the best demonstrated so far in the literature for growth on metal foils. Leveraging these achievements for energy applications, we demonstrate a VA-SWCNT LIB anode with capacity >1200 mAh/g at 1.0C and stable cycling beyond 300 cycles. Furthermore, this robust synthesis of high-quality VA-SWCNTs on metal foils presents a promising route toward mass production of high-performance CNT devices for a broad range of applications.
Energy↗
Stretchable Photodiodes with Polymer-Engineered Semiconductor Nanowires for Wearable Photoplethysmography
Healthcare systems worldwide have been stressed to provide sufficient resources to serve the increasing and aging population in our society. The situation became more challenging at the time of pandemic. Technology advancement, especially the adoption of wearable health monitoring devices, has provided an important supplement to current clinical equipment. Most health monitoring devices are rigid, however, human tissues are soft. Such a difference has prohibited intimate contact between the two and jeopardized wearing comfortableness, which hurdles measurement accuracy especially during longtime usage. Here, in this work, we report a soft and stretchable photodiode that can conformally adhere onto the human body without any pressure and measure cardiovascular variables for an extended period with higher reliability than commercial devices. The photodiode used a composite light absorber consisting of an organic bulk heterojunction embedded into an elastic polymer matrix. It is discovered that the elastic polymer matrix not only improves the morphology of the bulk heterojunction for obtaining the desired mechanical properties but also alters its electronic band structure and improves the electrical properties that lead to a reduced dark current and enhanced photovoltage in the stretchable photodiode. The work has demonstrated high fidelity measurements and longtime monitoring of heat rate variability and oxygen saturation, potentially enabling next-generation wearable photoplethysmography devices for point-of-care diagnosis of cardiovascular diseases in a more accessible and affordable way.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation
Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed a performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on stream, two days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeO x and having increased reducibility on the MgO support. Furthermore, the results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way to improved efficiencies of cerium utilization in oxidation catalysis.
36 MATERIALS SCIENCE↗
Effect of Co-Reactants on Interfacial Oxidation in Atomic Layer Deposition of Oxides on Metal Surfaces
We have examined the ALD of Al 2 O 3 using TMA as the precursor and t-BuOH and H 2 O as the co-reactants, focusing on the effects of the latter on both the ALD process and the possible modification of the underlying substrate. We have employed a quartz-crystal microbalance (QCM) to monitor ALD in situ and in real-time, and the deposited thin films have been characterized using X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and X-ray reflectivity. Growth of thin films of Al 2 O 3 using TMA and either t-BuOH or H 2 O as the co-reactant at T = 285 °C produces thin films of similar physical properties (density, stoichiometry, minimal carbon incorporation), and the growth rate per cycle is similar for the two co-reactants at this temperature. At a lower temperature of T = 120 °C, the behavior is starkly different, where growth occurs with H 2 O but not with t-BuOH. At either process temperature, we find no evidence for significant coverages of a long-lived tert-butoxy species from the reaction of t-BuOH. Deposition of thin films of Al 2 O 3 on metal surfaces of Cu and Co has been examined for evidence of interfacial oxidation. While growth with either co-reactant does not lead to the oxidation of the underlying Cu substrate, use of H 2 O leads to the oxidation of Co, while use of t-BuOH as the co-reactant does not. Thermodynamic factors may affect early stages of growth as Al species will likely scavenge all free O species. In contrast, at later times diffusion of species through the deposited Al 2 O 3 thin film could result in oxidation at the Al 2 O 3 |metal interface, a process that is strongly hindered in the case of t-BuOH due to its size. Furthermore, this observation highlights the importance of the choice of the co-reactant concerning ALD of oxides on metal surfaces.
36 MATERIALS SCIENCE↗
Assembling Vertical Block Copolymer Nanopores via Solvent Vapor Annealing on Homopolymer-Functionalized Substrates
Utilizing the self-assembly of block copolymers with large Flory–Huggins interaction parameters (χ) for nanofabrication is a formidable challenge due to the attendant large surface energy differences between the blocks. This work reports a robust protocol for the fabrication of thin films with highly ordered cylindrical nanopore arrays via the self-assembly of an asymmetric poly(styrene-block-4-vinylpyridine) (PS-b-P4VP) diblock copolymer blended with a P4VP homopolymer. The desired vertical domain orientation is achieved at the air–polymer interface by controlled solvent vapor annealing (SVA) using acetone, a solvent with weak selectivity for PS over P4VP, and at the substrate interface by functionalization using a hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) homopolymer brush. In contrast, the vertical cylinder orientation is unstable during acetone SVA on substrates functionalized using hydroxy-terminated poly(methyl methacrylate) (PMMA-OH). Although PMMA exhibits more balanced interfacial energies between PS and P4VP than P2VP in the dry state, it is also swollen more selectively by acetone. We hypothesize that the nearly balanced solvent swelling of the three polymers (P2VP, P4VP, and PS) stabilizes the vertical cylinder orientation, while unbalanced swelling (PMMA > P4VP and PS) does not. Here we further characterize pore formation by addition of a P4VP homopolymer and its postassembly extraction using ethanol, revealing a narrow window of pore size tunability. Notably, minimal differences in nanopore morphologies are observed for P4VP volume fractions as high as 0.1, regardless of the P4VP molar mass. However, further increasing the P4VP volume fraction results in domain reorientation or macrophase separation when its molar mass is less than or greater than the P4VP block molar mass, respectively. Using a P4VP homopolymer that is nearly equal in length to the P4VP block enables the fabrication of well-ordered arrays of vertical, through-film nanopores with high aspect ratios (>10), small periods (<23 nm), and diameters less than 10 nm.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Reversible Electron-Beam Patterning of Colloidal Nanoparticles at Fluid Interfaces
The directed self-assembly of colloidal nanoparticles (NPs) using external fields guides the formation of sophisticated hierarchical materials but becomes less effective with decreasing particle size. As an alternative, electron-beam-driven assembly offers a potential avenue for targeted nanoscale manipulation, yet remains poorly controlled due to the variety and complexity of beam interaction mechanisms. Here, we investigate the beam–particle interaction of silica NPs pinned to the fluid–vacuum interface of ionic liquid droplets. In these experiments, scanning electron microscopy of the droplet surface resolves NP trajectories over space and time while simultaneously driving their reorganization. With this platform, we demonstrate the ability to direct particle transport and create transient, reversible colloidal patterns on the droplet surface. By tuning the beam voltage, we achieve precise control over both the strength and sign of the beam–particle interaction, with low voltages repelling particles and high voltages attracting them. This response stems from the formation of well-defined solvent flow fields generated from trace radiolysis of the ionic liquid, as determined through statistical analysis of single-particle trajectories under varying solvent composition. Altogether, electron-beam-guided assembly introduces a versatile strategy for nanoscale colloidal manipulation, offering new possibilities for the design of dynamic, reconfigurable systems with applications in adaptive photonics and catalysis.
36 MATERIALS SCIENCE↗
Chemical Functional Groups Regulate Ion Concentrations and pHs in Nanopores
Understanding ion behaviors in functionalized nanopores is essential to deciphering reactions in both natural and engineered systems, such as sediments, biological ion channels, and membranes. While many efforts have shown the modified ion behaviors in the functionalized nanopores, a direct measurement and analysis to show how chemical functional groups affect ion concentrations in nanopores are critically needed. In this work, we present a plasmonic nanosensor that can measure the local concentrations of protons, anions (phosphate, nitrate, sulfate, and arsenate), and cations (mercury, lead, and copper) in functionalized nanopores, and we compare their concentrations in nanopores with the corresponding bulk concentrations. Notably, chemical functional groups induced ion concentrations differently in nanopores. In pristine nanopores and methyl- and phenyl-functionalized nanopores, we discovered an unexpected concurrence of an enhanced anion concentration and a suppressed cation concentration. In addition, the nanopore pH is dependent on bulk solution compositions and can be lower by 2.5 units, even when the bulk solution is well-buffered. In contrast, for hydrophilic (amine, thiol, and carboxyl) nanopores, pH depended on the p K a of the functional groups, and the heavy metal concentrations depended on chemical interactions with the functional groups. Our findings provide a better understanding of water chemistry in nanopores and can help precisely control ions in nanopores to benefit the design of membrane-based desalination techniques, CO 2 storage, and porous catalysts.
54 ENVIRONMENTAL SCIENCES↗
Nacre-like MXene/Polyacrylic Acid Layer-by-Layer Multilayers as Hydrogen Gas Barriers
MXenes are a promising class of 2D nanomaterials and are of particular interest for gas barrier applications due to their high aspect ratio. However, MXene nanosheets naturally bear a negative charge, which prevents assembly with negatively charged polymers, such as polyacrylic acid (PAA), into gas barrier coatings. Here, we present MXene- and PAA-based layer-by-layer (MXene/ PAA LbL) multilayers formed by leveraging hydrogen bonding interactions. When assembled in acidic conditions, MXene/PAA LbL multilayers exhibit conformal, pinhole-free, nacre-like structures. The MXene/PAA LbL multilayers yield high blocking capability and low permeability (0.14 ± 0.01 cc·mm·m −2 ·day −1 · MPa −1 ) for hydrogen gas which is over 9000 times lower than uncoated niobium (Nb) substrate. These nacre-like structures are also electronically conductive (σ DC , up to 370 ± 30 S cm −1 ). Because these multilayers utilize hydrogen bonding, their properties are highly sensitive to the pH of the assembly and its external environment. Specifically, the reversible deconstruction of these multilayers under basic conditions is experimentally verified. This study shows that hydrogen bonding interactions can be leveraged to form MXene LbL multilayers as gas barriers, electronically conductive coatings, and deconstructable thin films via pH control.
36 MATERIALS SCIENCE↗
Semiconductor Meta-Graphene and Valleytronics
Explore the source record for details and available documents.
Pai, Praveen [UT Dallas]↗
Oxygen Vacancy Evolution at Li x V 2 O 5 /LiPON Solid State Electrochemical Interfaces Using Depth Resolved Cathodoluminescence Spectroscopy
The formation of oxygen vacancies at buried LiPON/ Li x V 2 O 5 interfaces has been observed on a near-nanometer scale and nondestructively using depth-resolved cathodoluminescence spectroscopy (DRCLS) and interfacial markers. Before electrochemical cycling, as-deposited LiPON/Li x V 2 O 5 exhibits a 1.6 eV defect optical emission, which density functional theory calculations identify as originating from oxygen vacancies. This defect appears first within a few nanometers of the buried LiPON/Li x V 2 O 5 interface without cycling, indicating that spontaneous O diffusion from the Li x V 2 O 5 lattice into LiPON may have caused these interface-localized oxygen vacancy defects. DRCLS measured the intensity and spatial distribution of this oxygen vacancy signal as a function of electrochemical cycling in a LiPON/Li x V 2 O 5 half-cell, showing oxygen vacancy signal increasing and moving deeper into the electrode with increased cycle number. Significant electrochemical irreversibility was also observed, with poor Coulombic efficiency and a 15% drop in capacity over 50 cycles. Theoretical simulations predict that the presence of oxygen vacancies increases the energy barrier for lithium diffusion significantly, indicating that this aggregation of oxygen vacancies could be another battery degradation mechanism accompanying lithiation induced phase changes.
36 MATERIALS SCIENCE↗