Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Lunar capture orbits, a method of constructing earth moon trajectories and the lunar GAS mission

A method is described to construct trajectories from the earth to the moon which utilizes the existence of lunar capture orbits and the concept of 'stability boundary'. These orbits are ballistic and represent a new family of trajectories. They go into orbit about the moon from a suitable position about the earth with no required thrusting. This method is applied to a mission being studied at JPL called Lunar GAS (Get Away Special). Other applications are discussed.

Belbruno, E. A.↗

Energy requirements for HE-3 mining operations on the Moon

At the present rate of world energy consumption (10 TW-y/y) and allowing for an equilibrium consumption of 20 to 30 TW-y/y in mid 21st century, we will exhaust economically recoverable fossil fuels in the next 50 to 60 years. We will then have to rely on nuclear (fission and fusion) and renewable energy to feed, warm, and protect the world's population. Fusion energy is expected to play an important role in the 21st century and there a 2 billion dollar per year research program to commercialize that energy resource. A serious problem with this is its reliance on the D-T fuel cycle which releases 80 percent of its energy in the form of neutrons. These neutrons cause significant radiation damage and induce large amounts of radioactivity. There is another fusion fuel cycle involving the isotopes of Deuterium and Helium-3 which, if configured properly, releases 1 percent or less of its energy in neutrons. Obviously, such a fuel would be preferred, but there is no large source of He-3 known to satisfy world energy needs. Fortunately, a very large source of He-3 was found on the Moon, implanted over the past 4 billion years by the solar wind. Recent analysis of Apollo and Luna data reveals that over a million tons of He-3 sit on the Moon's surface. The potential energy in this He-3 fuel is 10 times that contained in all the coal, oil, and natural gas on the Earth. The purpose of this paper is to examine the energy required to extract the He-3 from the lunar regolith.

Kulcinski, Gerald L.↗

The radar-glory theory for icy moons with implications for radar mapping

The anomalous radar echoing properties of three ice-clad moons of Jupiter appear to be due to glory-like backscattering from buried craters. The enormous glare from these sources would impair geologic studies based on standard methods of radar mapping. It is not known whether similar or different problems will arise in the radar study of other icy surfaces in the outer solar system, or of the unseen surface of Titan. In any event, the results from the moons of Jupiter illustrate the role of exploratory measurements and the importance of possible bistatic radar-mapping techniques based on the use of separated transmitters and receivers.

Eshleman, Von R.↗

The moon: An abundant source of clean and safe fusion fuel for the 21st century

It is shown how helium-3 can be obtained from the moon and how its use in fusion reactors can benefit the inhabitants of this planet. The physics and technology issues associated with the use of He-3 is addressed. A description is given of He-3 distribution on the moon and of methods which could be used to retrieve it.

Kulcinski, G. L.↗

Future Astronomical Observatories on the Moon

Papers at a workshop which consider the topic astronomical observations from a lunar base are presented. In part 1, the rationale for performing astronomy on the Moon is established and economic factors are considered. Part 2 includes concepts for individual lunar based telescopes at the shortest X-ray and gamma ray wavelengths, for high energy cosmic rays, and at optical and infrared wavelengths. Lunar radio frequency telescopes are considered in part 3, and engineering considerations for lunar base observatories are discussed in part 4. Throughout, advantages and disadvantages of lunar basing compared to terrestrial and orbital basing of observatories are weighted. The participants concluded that the Moon is very possibly the best location within the inner solar system from which to perform front-line astronomical research.

Burns, Jack O.↗

Infrared astronomy from the Moon

The Moon offers some remarkable opportunities for performing infrared astronomy. Although the transportation overhead can be expected to be very large compared with that for facilities in Earth orbit, certain aspects of the lunar environment should allow significant simplifications in the design of telescopes with background limited performance, at least in some parts of the thermal infrared spectrum. Why leave the Earth to perform infrared astronomy is addressed as is the reasons for going all the way to the Moon for its environment.

Lester, Dan↗

To the moon on gossamer wings

The development of the Lunar Get-Away Special (GAS) canister to search for water on the moon is discussed. The possibility of detecting water on the moon with a gamma-ray spectrometer in a close polar orbit is reviewed. The Lunar GAS configuration, payloads, and subsystems, and a mission scenario are described. The Lunar GAS has a total mass of 150 kg and would require only 33 kg of xenon gas propellant to reach lunar orbit after a launch by the Space Shuttle.

Nock, Kerry T.↗

Monte Carlo simulations of the diurnal variation in seismic detection rate of sporadic meteoroid impacts on the moon

The rate of detection of meteoroid impacts on the moon by the lunar seismic network shows a characteristic diurnal variation. Assuming that these meteoroids have a flux and a preimpact orbital distribution similar to that of fireballs observed by terrestrial camera networks, one can compute the expected diurnal variation for a given set of parameters that describe the seismic wave generation and transmission on the moon. An iterative process to match the theoretical variation with the observed one has led us to the following results: (1) the majority of the detected impact events occur within a closer range of the network than was believed earlier. This results in higher meteoroid flux estimates from lunar seismic data that agree with the terrestrially measured flux. (2) For meteoroid masses smaller than 1000 g, seismic amplitude is approximately proportional to the one-fifth power of the impact speed; for larger masses it is approximately proportional to the eight-fifth power, provided that the terrestrial meteor data used for analysis are not biased. (3) Seismic efficiency of meteoroids smaller than 1000 g is significantly less than that of large meteoroids. (4) Using orbits of fireballs that represent meteorites, we predict that the share of meteorites among the detected impacts is approximately 15 percent assuming that seismic efficiency of the high-density meteorites is the same as that of average meteoroids. A greatly increased seismic efficiency for these high-density objects is not likely.

Oberst, J.↗

21st century astronomical observatories on the moon

The advantages and disadvantages of building astronomical observatories on the moon are described. Several modest facilities that could be placed near an early lunar base are described, such as a 1-m optical telescope and a gamma-ray burst detector. Several more elaborate observatories are discussed, such as a lunar far-side very low frequency array, an optical interferometer, and a moon-earth ultralong baseline radio interferometer.

Burns, Jack O.↗

The competition between thermal contraction and differentiation in the stress history of the moon

The stress history of the moon is discussed, taking into consideration the effects of thermal contraction and differentiation. The amount of expansion caused by extracting basalt from undifferentiated lunar material is estimated taking account of the uncertainty in the knowledge of the appropriate compositions, and the resulting estimate of the expansion is used to compare the relative importance of the thermal and differentiation effects in the moon's volumetric history. The results of calculations show that differentiation is likely to be of major importance and, thus, thermal expansion is not the sole possible contributor to evolutionary changes in the lunar radius.

Kirk, Randolph L.↗

On the angle and wavelength dependencies of the radar backscatter from the icy Galilean moons of Jupiter

This paper reports new developments in the buried crater model that has proved successful in explaining the anomalous strengths and polarizations of the radar echoes from the icy Galilean moons of Jupiter (Europa, Ganymede, and Callisto). The theory is extended to make predictions of the radar cross sections at all points on the surface of the moon, to compute the shape and strength of the power spectra, and to model a wavelength dependence that has been observed.

Gurrola, Eric M.↗

A diffusion source for sodium and potassium in the atmospheres of Mercury and the moon

Deep grain-boundary diffusion and regolith diffusion through a fractured crust and regolith can account not only for the Na/K ratios observed in the Mercurian and lunar atmospheres, but the large Na abundance enhancement of Mercury over lunar levels. A hot component of Na and K at Mercury is noted to be smaller in proportion to the total abundances of these two constituents than at the moon; this hot component is consistent with a population of meteoritic substances similar to lunar ones, as well as with a surface composition which has undergone no greater K depletion than that of the moon.

Sprague, Ann L.↗

A goal and strategy for human exploration of the moon and Mars

Eventual settlement of the solar system, beginning with the moon and Mars, is proposed, and a strategy for the exploration of and initial settlement of the moon and Mars, based on the model of European settlement of the Americas, is discussed. Strategies suggest an allocation of functions between humans and telerobots to conduct the exploration and initial settlement.

Pivirotto, Donna Shirley↗

Lunar Observer - Scouting for a moon base

The proposed 1996 Lunar Observer mission to the moon is described. Lunar Observer is intended to acquire the definitive data set of the moon from which an enduring and flexible lunar base site selection can be made. A mission profile is summarized and mission phases defined. The fourteen proposed experiments are described and their measurement capabilities outlined. The spacecraft, a derivation of the planned Mars Observer spacecraft design, is described. A description is included of a subsatellite, which is used to obtain the first measurements of the lunar far side gravity field.

Parker, G. L.↗

Lunar anorthosites, their equilibrium melts and the bulk moon

The present study uses plagioclase compositions and partition coefficients for several elements to estimate melts from which lunar anorthosites formed and the partition liquids from which these melts were derived. The Fe and Mg contents of the plagioclases are examined for their potential use as predictors of Fe and Mg in associated melts. Usable trace elements are employed with selected partition coefficients to predict the equilibrium melts for lunar anorthosites, and melts for anorthosites are used in various models to calculate the composition of the initial melt from which the lunar mantle and eventually the anorthosites evolved. The initial melts are compared with bulk moon compositions to evaluate the nature of the melting that could have produced the anorthosites. All the models indicate that extensive melting of all or nearly all of the lunar mantle is required to produce a lunar crust that constitutes 13-15 percent of the moon's volume.

Phinney, W. C.↗

Modeling the non-grey-body thermal emission from the full moon

The present series of thermophysical computer models for solid-surfaced planetary bodies whose surface roughness is modeled as paraboloidal craters of specified depth/diameter ratio attempts to characterize the nongrey-body brightness temperature spectra of the moon and of the Galilean satellites. This modeling, in which nondiffuse radiation properties and surface roughness are included for rigorous analysis of scattered and reemitted radiation within a crater, explains to first order the behavior of both limb-scans and disk-integrated IR brightness temperature spectra for the full moon. Only negative surface relief can explain lunar thermal emissions' deviation from smooth Lambert-surface expectations.

Vogler, Karl J.↗

The moon

Moon research is reviewed for the 1987-1990 time period. Particular attention is given to lunar meteorites, remote sensing and photogeology, impact cratering and impact breccias, soils, cores, and regolith breccias, mare magmatism, origin of the crust, bulk composition and origin of the moon.

Warren, Paul H.↗

The origin of the moon and the single impact hypothesis. IV

The smoothed-particle hydrodynamics method developed to simulate the conditions under which a major planetary collision may have led to the formation of the moon is presently used in 41 simulations exploring the relevant parameter space. Two possible scenarios emerge: one in which the moon is formed directly in the collision or only after dissipation and evolution of the disk. Attention is given to the Giant Blowoff hypothesis, in which not only the primitive atmosphere but large amounts of mantle material flow over the surface of the orbiting disk and blow off in the forward direction. Large amounts of angular momentum can also be lost.

Cameron, A. G. W.↗