Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Thermal tides in the atmosphere of Venus - Comparison of model results with observations

A linearized primitive equation model adapted to Venusian conditions was used to study thermal tidal anomalies in the Venus atmosphere exposed by Venus Orbiter IR sensors. The model received as input the IR data, mean zonal wind and solar input as functions of height and latitude, and the global mean static stability and Newtonian cooling and Rayleigh friction in relation to altitude. Basic state and forcing functions were defined for Venus, and the model generated brightness temperatures which could be compared with the IR data. The good correlations obtained suggest that the model accurately accounts for the low variation of phase with altitude and stronger semidiurnal oscillation features than diurnal oscillations. The model is concluded as a useful tool for assessing the role of thermal tides in maintaining Venus super rotation.

Pechmann, J. B.↗
NASA NTRS1992

Design and analysis of vortex generators on reengined Boeing 727-100QF center inlet S-duct by a reduced Navier-Stokes code

This paper describes the application of a three dimensional reduced Navier-Stokes code to perform design and analysis of vortex generators on a reengined Boeing 727-100QF center engine inlet S duct. This computer code with vortex generators modeling is shown to be cost-effective, accurate and easy to use to design the optimal vortex generators installed on a S-duct, predict its aerodynamic performance and provide the detailed flow field information.

Huang, Pao S.↗
NASA NTRS1998

Observational and Modeling Studies of Radiative, Chemical, and Dynamical Interactions in the Earth''s Atmosphere

A 3-dimensional model was developed to support mechanistic studies. The model solves the global primitive equations in isentropic coordinates, which directly characterize diabatic processes forcing the Brewer-Dobson circulation of the middle atmosphere. It's numerical formulation is based on Hough harmonics, which partition horizontal motion into its rotational and divergent components. These computational features, along with others, enable 3D integrations to be performed practically on RISC computer architecture, on which they can be iterated to support mechanistic studies. The model conserves potential vorticity quite accurately under adiabatic conditions. Forced by observed tropospheric structure, in which integrations are anchored, the model generates a diabatic circulation that is consistent with satellite observations of tracer behavior and diabatic cooling rates. The model includes a basic but fairly complete treatment of gas-phase photochemistry that represents some 20 chemical species and 50 governing reactions with diurnally-varying shortwave absorption. The model thus provides a reliable framework to study transport and underlying diabatic processes, which can then be compared against chemical and dynamical structure observed and in GCM integrations. Integrations with the Langley GCM were performed to diagnose feedback between simulated convection and the tropical circulation. These were studied in relation to tropospheric properties controlling moisture convergence and environmental conditions supporting deep convection, for comparison against mechanistic integrations of wave CISK that successfully reproduce the Madden-Julian Oscillation (MJO) of the tropical circulation. These comparisons were aimed at identifying and ultimately improving aspects of the convective simulation, with the objective of recovering a successful simulation of the MJO in the Langley GCM, behavior that should be important to budgets of upper-tropospheric water vapor and chemical species.

Salby, Murry↗
NASA NTRSDate not supplied

Comparison of Multivariate Time Series Prediction Techniques for Emulating Noah-LSM Soil Moisture Outputs

Land surface models are crucial tools for many earth science applications including numerical weather prediction, water resource and crop monitoring, and climatological analysis. Given a set of atmospheric forcings, seasonal data, and static parameters, models like Noah-LSM solve for land surface quantities including skin temperature, sensible heat flux, and soil moisture. While these calculations are theoretically robust, they are often computationally expensive. Since artificial neural networks (ANNs) are universal function approximators, they can learn to emulate the output of a deterministic numerical model given a time series of input forcings, with the learned ANN having substantially shorter execution time. The ANN could efficiently parameterize other models, generate ensembles, and provide first-guess inputs for retrievals. As such, with the goal of developing a model that efficiently mimics the output of Noah-LSM given NLDAS2 forcings on a region covering much of the central US, we examine and compare several neural network architectures for the multi-horizon multivariate time series forecasting problem. Recent literature includes a diverse set of approaches including autoregressive architectures like LSTM and GRU, parametric and non-parametric statistical predictors (ForecastNet and MQRNN), self-attention (LSTM-attention-LSTM), and temporal convovlution (DeepTCN). We implement several of these models for the Noah-LSM prediction task, highlighting the features and challenges for each and providing practical insight on the training process.

Mitchell Dodson↗
DOE OSTI2023

pyflowline: a mesh-independent river network generator for hydrologic models

River networks are crucial in hydrologic and Earth system models. Accurately representing river networks in spatially distributed hydrologic models requires considering the model's spatial discretization and computational mesh. However, current methods of generating river networks for hydrologic models do not typically support unstructured meshes. Unstructured meshes offer numerous advantages over traditional, structured meshes. To overcome this limitation, we developed PyFlowline, a Python package that generates mesh-independent river networks. With PyFlowline, hydrologic modelers can generate conceptual river networks and their topological relationships for both structured and unstructured meshes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Elementary particles in the early Universe

The high-temperature limit of the Standard Model generated by the contractions of gauge groups is discussed. Contraction parameters of gauge group SU(2) of the Electroweak Model and gauge group SU(3) of Quantum Chromodynamics are taken identical and tending to zero when the temperature increases. Properties of the elementary particles change drastically at the infinite temperature limit: all particles lose masses, all quarks are monochromatic. Electroweak interactions become long-range and are mediated by neutral currents. Particles of different kind do not interact. It looks like some stratification with only one sort of particles in each stratum. The Standard Model passes in this limit through several stages, which are distinguished by the powers of the contraction parameter. For any stage intermediate models are constructed and the exact expressions for the respective Lagrangians are presented. The developed approach describes the evolution of the Standard Model in the early Universe from the Big Bang up to the end of several nanoseconds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Spatiotemporal forecasting of the edge localized modes in tokamak plasmas using neural networks

Artificial intelligence techniques have been increasingly adopted by the plasma and fusion science to address problems like plasma reconstruction, surrogate modeling, and tokamak/stellarator optimization. A key focus in sustained fusion research is the prediction and mitigation of edge-localized-modes (ELMs), instabilities that occur in short, periodic bursts and can cause erosion to the tokamak vessel wall. Recent research has demonstrated the power of neural networks in approximating continuous functions. In this work, we build spatiotemporal forecasting models that can predict the onset of ELMs and their evolution at early stages. We leverage recent advances in generative modeling, sequence-to-sequence modeling, and Fourier neural operators to propose architectures and training strategies that can learn to forecast short to long term dynamics of the noisy signals due to ELMs. We benchmark the developed model against a state-of-the-art foundation model using the beam emission spectroscopy (BES) data that captures the plasma fluctuations due to ELMs over a 8 x 8 spatial grid. Our models demonstrate high accuracy, outperforming the baselines, in predicting the evolution of BES signals during ELM events. Furthermore, the developed models exhibit high accuracy in predicting the rapid rise and relaxation of the signals due to ELMs within 30–80 µs.

edge localized modes↗
DOE OSTI2014

Numerical modeling of carrier gas flow in atomic layer deposition vacuum reactor: A comparative study of lattice Boltzmann models

This paper characterizes the carrier gas flow in the atomic layer deposition (ALD) vacuum reactor by introducing Lattice Boltzmann Method (LBM) to the ALD simulation through a comparative study of two LBM models. Numerical models of gas flow are constructed and implemented in two-dimensional geometry based on lattice Bhatnagar–Gross–Krook (LBGK)-D2Q9 model and two-relaxation-time (TRT) model. Both incompressible and compressible scenarios are simulated and the two models are compared in the aspects of flow features, stability, and efficiency. Our simulation outcome reveals that, for our specific ALD vacuum reactor, TRT model generates better steady laminar flow features all over the domain with better stability and reliability than LBGK-D2Q9 model especially when considering the compressible effects of the gas flow. The LBM-TRT is verified indirectly by comparing the numerical result with conventional continuum-based computational fluid dynamics solvers, and it shows very good agreement with these conventional methods. The velocity field of carrier gas flow through ALD vacuum reactor was characterized by LBM-TRT model finally. The flow in ALD is in a laminar steady state with velocity concentrated at the corners and around the wafer. The effects of flow fields on precursor distributions, surface absorptions, and surface reactions are discussed in detail. Steady and evenly distributed velocity field contribute to higher precursor concentration near the wafer and relatively lower particle velocities help to achieve better surface adsorption and deposition. The ALD reactor geometry needs to be considered carefully if a steady and laminar flow field around the wafer and better surface deposition are desired.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

PNNL-CompBio/3D_Scaffold

A domain-aware generative framework that takes 3D coordinates of the molecule and scaffold as an input and generates 3D coordinates of novel therapeutic candidates as an output while preserving the desired scaffolds. We show that our model generates predominantly valid, unique, novel, and experimentally synthesizable molecules that have drug-like properties similar to the molecules in the training set

Kumar, Neeraj [Pacific Northwest National Laborato↗
NASA NTRS2017

Structural Design Exploration of an Electric Powered Multi-Propulsor Wing Configuration

Advancements in aircraft electric propulsion may enable an expanded operational envelope for electrically powered vehicles compared to their internal combustion engine counterparts. High aspect ratio wings provide additional lift and drag reduction for a proposed multi-propulsor design, however, the challenge is to reduce the weight of wing structures while maintaining adequate structural and aeroelastic margins. Design exploration using a conventional design-and-build philosophy coupled with a finite element method (FEM)-based design of experiments (DOE) strategy are presented to examine high aspect ratio wing structures that have spanwise distributed electric motors. Multiple leading-edge-mounted engine masses presented a challenge to design a wing within acceptable limits for dynamic and aeroelastic stability. Because the first four primary bending eigenmodes of the proposed wing structure are very sensitive to outboard motor placement, safety-of-flight requirements drove the need for multiple spars, rib attachments, and outboard structural reinforcements in the design. Global aeroelasticity became an increasingly important design constraint during the on-going design process, with outboard motor pod flutter ultimately becoming a primary design constraint. Designers successively generated models to examine stress, dynamics, and aeroelasticity concurrently. This research specifically addressed satisfying multi-disciplinary design criteria to generate fluid-structure interaction solution sets, and produced high aspect ratio primary structure designs for the NASA Scalable Convergent Electric Propulsion Technology and Operations Research (SCEPTOR) project in the Aeronautic Research Mission Directorate at NASA. In this paper, a dynamics-driven, quasi-inverse design methodology is presented to address aerodynamic performance goals and structural challenges encountered for the SCEPTOR demonstrator vehicle. These results are compared with a traditional computer aided design based approach.

Moore, James B.↗
DOE OSTI2021

BETO 2021 Peer Review - WBS 4.1.2.32: Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis project uses systems thinking and analysis to assess current and/or prospective techno-economics, research and development, deployment strategies, policy, and market conditions and their impact on the potential development trajectories of the bioenergy industry over time. Results from this project include identification of opportunities and constraints to industrial development, quantification of multiple metrics (energy, economic, environmental) and informing researchers, decision makers, and industry of the steps needed for a sustainable, nationwide biofuels industry. Analyses from this project enable the creation of a bioenergy industry by (1) inciting policy-makers to explore scenarios for nationwide biofuels production, identifying policy actions consistent with pathways for growth; (2) improving industry’s understanding of industry growth potential under different technology and investment conditions, better targeting their development efforts; and (3) providing universities and other interested stakeholders with tools and analyses that can be adapted to meet research and teaching objectives, connecting students with careers that build the industry. One of the many modeling tools used in this project, the Biomass Scenario Model (BSM) is a publicly-available, unique, validated, state-of-the-art, award-winning, fourth-generation model of the domestic biofuels supply chain which explicitly focuses on how and under what conditions biofuel technologies might be deployed to contribute to the U.S. transportation energy sector. We use models like the BSM to examine the implications of policies and incentives as well as their potential side-effects. The BSM uses a system-dynamics simulation to model dynamic interactions and transitions across the supply chain; it tracks the deployment of biofuels given industrial learning and the reaction of the investment community in the context of land availability, projected oil markets, consumer demand for biofuels, and government policies over time. Under expected market conditions, analyses using the BSM suggest that the biofuels industry may require significant external actions in the early years to thrive. Interventions that accelerate the industrial learning process (e.g. operation of pre-commercial and commercial facilities) have been identified as having strong influence in starting the growth of a commercial biofuel industry. Policies which are coordinated across the whole supply chain in BSM foster the growth of the biofuels industry and production of tens of billions of gallons of biofuels may occur under sufficiently favorable conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis (BSA) project uses systems thinking and analysis to assess how techno economics, research and development, deployment strategies, policy, and market conditions affect the potential development trajectories of the developing bioenergy industry. This project informs researchers, decision makers, and industry by identifying opportunities for and constraints to industrial development and quantifying important industry metrics (e.g., energy, economic, environmental) towards a sustainable domestic bioenergy system. One of the tools used in this project, the Bioenergy Scenario Model (BSM) is a publicly-available, unique, validated, state-of-the-art, award-winning, fourth-generation model of the domestic biofuels supply chain which explicitly focuses on how and under what conditions biofuel technologies might be deployed to contribute to the U.S. transportation energy sector. Analysis products from this effort enable the development of the bioenergy industry by (1) encouraging policy-makers to explore multiple levers simulating outside impacts on biofuels production, identifying policy actions; (2) improving industry's understanding of growth potential under different market conditions, better targeting their development efforts; and (3) providing universities and other interested stakeholders with analysis tools and analyses that can be adapted to meet research and teaching objectives, thus connecting students with careers that build the industry.

bioenergy↗
NASA NTRS1995

Future requirements in surface modeling and grid generation

The past ten years have seen steady progress in surface modeling procedures, and wholesale changes in grid generation technology. Today, it seems fair to state that a satisfactory grid can be developed to model nearly any configuration of interest. The issues at present focus on operational concerns such as cost and quality. Continuing evolution of the engineering process is placing new demands on the technologies of surface modeling and grid generation. In the evolution toward a multidisciplinary analysis-bascd design environment, methods developed for Computational Fluid Dynamics are finding acceptance in many additional applications. These two trends, the normal evolution of the process and a watershed shift toward concurrent and multidisciplinary analysis, will be considered in assessing current capabilities and needed technological improvements.

Cosner, Raymond R.↗
NASA NTRS1992

NASA Workshop on future directions in surface modeling and grid generation

Given here is a summary of the paper sessions and panel discussions of the NASA Workshop on Future Directions in Surface Modeling and Grid Generation held a NASA Ames Research Center, Moffett Field, California, December 5-7, 1989. The purpose was to assess U.S. capabilities in surface modeling and grid generation and take steps to improve the focus and pace of these disciplines within NASA. The organization of the workshop centered around overviews from NASA centers and expert presentations from U.S. corporations and universities. Small discussion groups were held and summarized by group leaders. Brief overviews and a panel discussion by representatives from the DoD were held, and a NASA-only session concluded the meeting. In the NASA Program Planning Session summary there are five recommended steps for NASA to take to improve the development and application of surface modeling and grid generation.

Vandalsem, W. R.↗
DOE OSTI2018

Modeling the effects of molecular disorder on the properties of Frenkel excitons in organic molecular semiconductors

The Frenkel exciton model offers a convenient framework for simulating electronic excitations in organic conjugated systems that are too large to address with atomistic level electronic structure methods. Parameterization of this model is typically based on analytical expressions that incompletely describe the spatial and temporal correlations that are inherent to many condensed phase molecular systems. In this manuscript, we introduce a general procedure for including these correlations in the Frenkel exciton model, by mapping them directly from all-atom molecular configurations, for instance from classical molecular dynamics. Regardless of system morphology, this mapping automatically captures the spatial and temporal molecular correlations that are otherwise difficult or impossible to represent in terms of low-dimensional correlation functions. We apply this procedure to study the excited state properties of condensed phase materials made up of thiophene oligomers. We demonstrate that Frenkel model parameters can be mapped from a series of single molecule electronic structure calculations, and that for these materials efficient semi-empirical methods are sufficient to accurately reproduce experimental spectral measurements. By analyzing the statistics of model parameters derived from materials with different characteristic morphologies, we highlight failures in some assumptions that are commonly applied when generating model parameters. Finally, by simulating exciton dynamics on a mapped Frenekel exciton model, we demonstrate the ability to quantify the effect of material morphology on the dynamic properties of excitons.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Utilizing guanine-coordinated Zn 2+ ions to determine DNA crystal structures by single-wavelength anomalous diffraction

The experimental phase determination of crystal structures of nucleic acids and nucleic acid–ligand complexes would benefit from a facile method. Even for double-stranded DNA, software-generated models are generally insufficiently accurate to serve as molecular replacement search models, necessitating experimental phasing. Here, it is demonstrated that Zn 2+ ions coordinated to the N7 atom of guanine bases generate sufficient anomalous signal for single-wavelength anomalous diffraction (SAD) phasing of DNA crystal structures. Using zinc SAD, three crystal structures of double-stranded DNA oligomers, 5'-AGGGATCCCT-3', 5'-GGGATCCC-3' and 5'-GAGGCCTC-3', were determined. By determining the crystal structure of one of these oligomers, GAGGCCTC, in the presence of Mg 2+ instead of Zn 2+ , it was demonstrated that Zn 2+ is not structurally perturbing. These structures allowed the analysis of structural changes in the DNA on the binding of analogues of the natural product mithramycin to two of these oligomers, AGGGATCCCT and GAGGCCTC. Zinc SAD may become a routine approach for determining the crystal structures of nucleic acids and their complexes with small molecules.

DNA–drug complexes↗
DOE OSTI2015

MO-FG-204-04: How Iterative Reconstruction Algorithms Affect the NPS of CT Images

Purpose: To evaluate how the third generation model based iterative reconstruction (MBIR) compares with filtered back-projection (FBP), adaptive statistical iterative reconstruction (ASiR), and the second generation MBIR based on noise power spectrum (NPS) analysis over a wide range of clinically applicable dose levels. Methods: The Catphan 600 CTP515 module, surrounded by an oval, fat-equivalent ring to mimic patient size/shape, was scanned on a GE HD750 CT scanner at 1, 2, 3, 6, 12 and 19mGy CTDIvol levels with typical patient scan parameters: 120kVp, 0.8s, 40mm beam width, large SFOV, 0.984 pitch and reconstructed thickness 2.5mm (VEO3.0: Abd/Pelvis with Texture and NR05). At each CTDIvol level, 10 repeated scans were acquired for achieving sufficient data sampling. The images were reconstructed using Standard kernel with FBP; 20%, 40% and 70% ASiR; and two versions of MBIR (VEO2.0 and 3.0). For evaluating the effect of the ROI spatial location to the Result of NPS, 4 ROI groups were categorized based on their distances from the center of the phantom. Results: VEO3.0 performed inferiorly comparing to VEO2.0 over all dose levels. On the other hand, at low dose levels (less than 3 mGy), it clearly outperformed ASiR and FBP, in NPS values. Therefore, the lower the dose level, the relative performance of MBIR improves. However, the shapes of the NPS show substantial differences in horizontal and vertical sampling dimensions. These differences may determine the characteristics of the noise/texture features in images, and hence, play an important role in image interpretation. Conclusion: The third generation MBIR did not improve over the second generation MBIR in term of NPS analysis. The overall performance of both versions of MBIR improved as compared to other reconstruction algorithms when dose was reduced. The shapes of the NPS curves provided additional value for future characterization of the image noise/texture features.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

LeWRON: Learning ElectroWeak phase tRansitiON with agentic architecture

An agent to analyze electroweak phase transition. LeWRON turns a BSM model description or a reproduction target into a structured run: symbolic setup, effective-potential artifacts, finite-temperature machinery, generated model code, a scientific report, and an interactive exploration session. It keeps both machine-readable artifacts and human-readable notes, so a run can be resumed, audited, revised, and shared.

Wang, Isaac [Fermi National Accelerator Laboratory↗