Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Finite element model and identification procedure

Viewgraphs on finite element model and identification procedure are presented. Topics covered include: interferometer finite element model; testbed mode shapes; finite element model update; identification procedure; shaker locations; data analysis; modal frequency and damping comparison; computational procedure; fit comparison; residue analysis; typical residues; identification/FEM residual comparison; and pathlength control using isolation mounts.

How, Jonathan P.↗
NASA NTRS2006

Statistical of a Characterization and the Simulation of a Reverberation Chamber Using Finite-Element Techniques

The statistical characterization of a simulation reverberation chamber is performed by considering a two-dimensional finite element model. This model includes a source to study the particular modal fields that couple into either a transverse electric or transverse magnetic configuration. The analysis includes a characterization of the basic field statistics, max-to-average ratio, normalized standard deviation, stirring ratio, and field uniformity. The shielding effectiveness of an aperture will be studied that will provide some insight into the nature of the fields coupled from a complex to a noncomplex environment.

Bunting, Charles F.↗
NASA NTRS2009

Modeling Techniques for Evaluation the Effectiveness of Particle Damping in Turbomachinery

High power turbopumps are frequently used to supply propellants to the combustion chambers of rocket engines. Due to the high pressures and flow-rates required, turbopump components are subjected to harsh environments which include dynamic excitation due to random, sine, and acoustic vibration. Additionally, fluid-induced forces can couple with the dynamics of the structure resulting in flow induced instabilities (flutter). Structural response to these forms of excitation results in reduced fatigue life and increases the likelihood of an operational failure. Particle damping has been used successfully on vibration problems in the past by increasing the damping and therefore reducing the response to acceptable levels. Empirical methods have typically been employed to evaluate the performance of the particles in reducing the structural response. This report explores the use of finite element methods to estimate the effectiveness of particle damping in a typical non-rotating turbopump component. Axisymmetric harmonic models are used to estimate the increase in modal damping produced by the addition of particles in the cavity of an axisymmetric seal. Target modes of vibration are evaluated to quantify how the effective particle damping is altered by geometry changes in the seal design. A new method to predict the performance of particle dampers is developed and shown to provide more reasonable estimates of damping.

Ehrgott, R.↗
NASA NTRS2015

Aeroelastic Airworthiness Assesment of the Adaptive Compliant Trailing Edge Flaps

The Adaptive Compliant Trailing Edge (ACTE) demonstrator is a joint task under the National Aeronautics and Space Administration Environmentally Responsible Aviation Project in partnership with the Air Force Research Laboratory and FlexSys, Inc. (Ann Arbor, Michigan). The project goal is to develop advanced technologies that enable environmentally friendly aircraft, such as adaptive compliant technologies. The ACTE demonstrator flight-test program encompassed replacing the Fowler flaps on the SubsoniC Aircraft Testbed, a modified Gulfstream III (Gulfstream Aerospace, Savannah, Georgia) aircraft, with control surfaces developed by FlexSys. The control surfaces developed by FlexSys are a pair of uniquely-designed unconventional flaps to be used as lifting surfaces during flight-testing to validate their structural effectiveness. The unconventional flaps required a multidisciplinary airworthiness assessment to prove they could withstand the prescribed flight envelope. Several challenges were posed due to the large deflections experienced by the structure, requiring non-linear analysis methods. The aeroelastic assessment necessitated both conventional and extensive testing and analysis methods. A series of ground vibration tests (GVTs) were conducted to provide modal characteristics to validate and update finite element models (FEMs) used for the flutter analyses for a subset of the various flight configurations. Numerous FEMs were developed using data from FlexSys and the ground tests. The flap FEMs were then attached to the aircraft model to generate a combined FEM that could be analyzed for aeroelastic instabilities. The aeroelastic analysis results showed the combined system of aircraft and flaps were predicted to have the required flutter margin to successfully demonstrate the adaptive compliant technology. This paper documents the details of the aeroelastic airworthiness assessment described, including the ground testing and analyses, and subsequent flight-testing performed on the unconventional ACTE flaps.

aeroelasticity↗
NASA NTRSDate not supplied

NASA Armstrong State of Discipline

- AFRC’s Overview Statement - AFRC is NASA's primary center for high-risk, atmospheric flight research and ground testing on modified or unique research vehicles and test articles - AFRC’s L&D Facility - Flight Loads Lab (FLL): High-bay test area with flight line access for large-scale structural & thermal testing of aerospace structures for component and airframe qualification/airworthiness & research - AFRC’s L&D Expertise - Mainly supports projects in the Aeronautics Research Mission - Aeroelasticity, Model Tuning, FEM & Flutter Analysis Airworthiness Clearance support - Modal Testing, Mass Property Testing & Flight Testing

Natalie Spivey↗
NASA NTRS1983

Experimental modal analysis

Experimental modal analysis is extremely important with regard to verification of analytical models, identification of vibration and acoustic problems, and structural modification and sensitivity analysis. With the expanding access of the testing environment to computational power, the complexity of existing approaches, as well as the development of new approaches, to the estimation of modal parameters has grown tremendously. Currently, the state of the art in experimental modal analysis involves methods that can be grouped in four categories: forced normal mode excitation method, frequency response function method, damped complex exponential function method, and mathematical input-output model methods. The theoretical basis of each of these general approaches, with appropriate references, is reviewed briefly.

Allemang, R. J.↗
NASA NTRS1996

Structural dynamic model obtained from flight use with piloted simulation and handling qualities analysis

The ability to use flight data to determine an aircraft model with structural dynamic effects suitable for piloted simulation. and handling qualities analysis has been developed. This technique was demonstrated using SR-71 flight test data. For the SR-71 aircraft, the most significant structural response is the longitudinal first-bending mode. This mode was modeled as a second-order system, and the other higher order modes were modeled as a time delay. The distribution of the modal response at various fuselage locations was developed using a uniform beam solution, which can be calibrated using flight data. This approach was compared to the mode shape obtained from the ground vibration test, and the general form of the uniform beam solution was found to be a good representation of the mode shape in the areas of interest. To calibrate the solution, pitch-rate and normal-acceleration instrumentation is required for at least two locations. With the resulting structural model incorporated into the simulation, a good representation of the flight characteristics was provided for handling qualities analysis and piloted simulation.

Powers, Bruce G.↗
DOE OSTI2025

Position Papers for Inverse Methods for Complex Systems under Uncertainty Workshop

The ability to solve inverse problems – inferring unknown parameters, structures, or states of a system from observed data – is essential for advancing scientific discovery and innovation capabilities for the DOE mission. Basic research needs and challenges are particularly acute in emerging areas such as the interactive, data-driven, modeling and simulation of digital twins; decision support for experiments at DOE scientific user facilities; and for other complex systems and workflows. Inverse problems are at the heart of understanding and controlling complex systems due to factors such as observational data with varying modalities and fidelities, inherent uncertainties in physical measurements and numerical models, and the computational demands of rapid and high-fidelity simulations. The convergence of recent scientific computing trends – scientific machine learning, artificial intelligence, and computing advances such as exascale computing – is creating unprecedented opportunities. These advancements offer the potential to revolutionize how we approach inverse problems to extract actionable insights with the required level of accuracy and computational efficiency. This workshop and the Call for Position Papers are vital steps in bringing together experts to collectively explore and identify the new computational and mathematical directions needed in inverse methods for complex systems under uncertainty.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2010

Ares I-X Flight Test Vehicle Modal Test

The first test flight of NASA's Ares I crew launch vehicle, called Ares I-X, was launched on October 28, 2009. Ares I-X used a 4-segment reusable solid rocket booster from the Space Shuttle heritage with mass simulators for the 5th segment, upper stage, crew module and launch abort system. Flight test data will provide important information on ascent loads, vehicle control, separation, and first stage reentry dynamics. As part of hardware verification, a series of modal tests were designed to verify the dynamic finite element model (FEM) used in loads assessments and flight control evaluations. Based on flight control system studies, the critical modes were the first three free-free bending mode pairs. Since a test of the free-free vehicle was not practical within project constraints, modal tests for several configurations during vehicle stacking were defined to calibrate the FEM. Test configurations included two partial stacks and the full Ares I-X flight test vehicle on the Mobile Launcher Platform. This report describes the test requirements, constraints, pre-test analysis, test execution and results for the Ares I-X flight test vehicle modal test on the Mobile Launcher Platform. Initial comparisons between pre-test predictions and test data are also presented.

Buehrle, Ralph D.↗
NASA NTRS2010

Ares I-X Launch Vehicle Modal Test Overview

The first test flight of NASA's Ares I crew launch vehicle, called Ares I-X, is scheduled for launch in 2009. Ares IX will use a 4-segment reusable solid rocket booster from the Space Shuttle heritage with mass simulators for the 5th segment, upper stage, crew module and launch abort system. Flight test data will provide important information on ascent loads, vehicle control, separation, and first stage reentry dynamics. As part of hardware verification, a series of modal tests were designed to verify the dynamic finite element model (FEM) used in loads assessments and flight control evaluations. Based on flight control system studies, the critical modes were the first three free-free bending mode pairs. Since a test of the free-free vehicle is not practical within project constraints, modal tests for several configurations in the nominal integration flow were defined to calibrate the FEM. A traceability study by Aerospace Corporation was used to identify the critical modes for the tested configurations. Test configurations included two partial stacks and the full Ares I-X launch vehicle on the Mobile Launcher Platform. This paper provides an overview for companion papers in the Ares I-X Modal Test Session. The requirements flow down, pre-test analysis, constraints and overall test planning are described.

Buehrle, Ralph D.↗
NASA NTRS1999

Sensitivity Analysis for Coupled Aero-structural Systems

A novel method has been developed for calculating gradients of aerodynamic force and moment coefficients for an aeroelastic aircraft model. This method uses the Global Sensitivity Equations (GSE) to account for the aero-structural coupling, and a reduced-order modal analysis approach to condense the coupling bandwidth between the aerodynamic and structural models. Parallel computing is applied to reduce the computational expense of the numerous high fidelity aerodynamic analyses needed for the coupled aero-structural system. Good agreement is obtained between aerodynamic force and moment gradients computed with the GSE/modal analysis approach and the same quantities computed using brute-force, computationally expensive, finite difference approximations. A comparison between the computational expense of the GSE/modal analysis method and a pure finite difference approach is presented. These results show that the GSE/modal analysis approach is the more computationally efficient technique if sensitivity analysis is to be performed for two or more aircraft design parameters.

Giunta, Anthony A.↗
NASA NTRS1993

A comparison of refined models for flexible subassemblies

Interactions between structure response and control of large flexible space systems have challenged current modeling techniques and have prompted development of new techniques for model improvement. Due to the geometric complexity of envisioned large flexible space structures, finite element models (FEM's) will be used to predict the dynamic characteristics of structural components. It is widely accepted that these models must be experimentally 'validated' before their acceptance as the basis for final design analysis. However, predictions of modal properties (natural frequencies, mode shapes, and damping ratios) are often in error when compared to those obtained from Experimental Modal Analysis (EMA). Recent research efforts have resulted in the development of algorithmic approaches for model improvement, also referred to as system or structure identification.

Smith, Suzanne Weaver↗
NASA NTRS1999

Aerodynamic and Aeroelastic Insights using Eigenanalysis

This paper presents novel analytical results for eigenvalues and eigenvectors produced using discrete time aerodynamic and aeroelastic models. An unsteady, incompressible vortex lattice aerodynamic model is formulated in discrete time; the importance of several modeling parameters is examined. A detailed study is made of the behavior of the aerodynamic eigenvalues both in discrete and continuous time. The aerodynamic model is then incorporated into aeroelastic equations of motion. Eigenanalyses of the coupled equations produce stability results and modal characteristics which are valid for critical and non-critical velocities. Insight into the modeling and physics associated with aeroelastic system behavior is gained by examining both the eigenvalues and the eigenvectors. Potential pitfalls in discrete time model construction and analysis are examined.

Heeg, Jennifer↗
NASA NTRS2004

Aerodynamic and Aeroelastic Insights using Eigenanalysis

This paper presents novel analytical results for eigenvalues and eigenvectors produced using discrete time aerodynamic and aeroelastic models. An unsteady, incompressible vortex lattice aerodynamic model is formulated in discrete time; the importance of several modeling parameters is examined. A detailed study is made of the behavior of the aerodynamic eigenvalues both in discrete and continuous time. The aerodynamic model is then incorporated into aeroelastic equations of motion. Eigenanalyses of the coupled equations produce stability results and modal characteristics which are valid for critical and non-critical velocities. Insight into the modeling and physics associated with aeroelastic system behavior is gained by examining both the eigenvalues and the eigenvectors. Potential pitfalls in discrete time model construction and analysis are examined.

Heeg, Jennifer↗
NASA NTRS1994

Dynamic response of NASA Rotor Test Apparatus and Sikorsky S-76 hub mounted in the 80- by 120-Foot Wind Tunnel

A shake test was conducted in the 80- by 120-Foot Wind Tunnel at NASA Ames Research Center, using the NASA Ames Rotor Test Apparatus (RTA) and the Sikorsky S-76 rotor hub. The primary objective of this shake test was to determine the modal properties of the RTA, the S-76 rotor hub, and the model support system installed in the wind tunnel. Random excitation was applied at the rotor hub, and vibration responses were measured using accelerometers mounted at various critical locations on the model and the model support system. Transfer functions were computed using the load cell data and the accelerometer responses. The transfer function data were used to compute the system modal parameters with the aid of modal analysis software.

Peterson, Randall L.↗
NASA NTRS1993

A comparison of viscoelastic damping models

Modern finite element methods (FEM's) enable the precise modeling of mass and stiffness properties in what were in the past overwhelmingly large and complex structures. These models allow the accurate determination of natural frequencies and mode shapes. However, adequate methods for modeling highly damped and high frequency dependent structures did not exist until recently. The most commonly used method, Modal Strain Energy, does not correctly predict complex mode shapes since it is based on the assumption that the mode shapes of a structure are real. Recently, many techniques have been developed which allow the modeling of frequency dependent damping properties of materials in a finite element compatible form. Two of these methods, the Golla-Hughes-McTavish method and the Lesieutre-Mingori method, model the frequency dependent effects by adding coordinates to the existing system thus maintaining the linearity of the model. The third model, proposed by Bagley and Torvik, is based on the Fractional Calculus method and requires fewer empirical parameters to model the frequency dependence at the expense of linearity of the governing equations. This work examines the Modal Strain Energy, Golla-Hughes-McTavish and Bagley and Torvik models and compares them to determine the plausibility of using them for modeling viscoelastic damping in large structures.

Slater, Joseph C.↗
NASA NTRS1982

Synthesis of a modern/classical controller for large space structures

The paper is concerned with wide-sense stationary random vibrations of a representative large space structure subject to nonwhite excitations, and with synthesis of its controller amid modeling uncertainties due to truncated modes. Dynamics is analyzed by residue calculus in frequency domain. Steady state variance of a modal coordinate is shown to depend on, among other things, power spectral density of excitation at the modal frequency. Modal cost analysis is performed for an order reduction with a performance objective of attitude, attitude rate and energy control. Optimal and suboptimal output feedback controllers are compared. By treating deleted modes as an additive and a multiplicative perturbation in an idealized transfer function, the low frequency modes omitted according to modal cost analysis are found to cause instability. Finally, the size of the idealized model is shown to be governed by light damping and stringency in performance and stability specifications.

Hablani, H. B.↗