SEARCH · Engineering Papers
Results for “local control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of Ag metal dispersion on the thermal conversion of ethanol to butadiene over Ag-ZrO 2 /SiO 2 catalysts
Atomistic scale models were developed and coupled with experimental investigation to deliver a functional understanding of catalytic activity and selectivity in the conversion of ethanol to 1,3-butadiene over Ag/ZrO 2 /SiO 2 . A detailed evaluation of the structural and electronic properties of the resultant catalyst models led to the identification of critical active sites of the catalyst. More importantly, the extent of Ag dispersion on the SiO 2 support and relative proximity to ZrO 2 were found to vary with the oxidation state of Ag and local coordination environment (Ag-O SiO2 ) allowing for critical control of ethanol conversion towards butadiene or ethylene. Simulations revealed that less dispersed or clustered Ag contain predominantly Ag 0 charge state and promote conversion of ethanol to ethylene. The well-dispersed Ag/ZrO 2 /SiO 2 catalyst instead contain a larger fraction of cationic Ag δ+ , and predominantly promote ethanol dehydrogenation and subsequent production of butadiene. The theoretical insights drawn were validated and confirmed experimentally using TEM, XRD and reactivity measurements demonstrating the effect of Ag dispersion on the selectivity of ethanol conversion.
Local structural ordering determines the mechanical damage tolerance of amorphous grain boundary complexions
Amorphous grain boundary complexions act as toughening features within a microstructure because they can absorb dislocations more efficiently than traditional grain boundaries. This toughening effect should be a strong function of the local internal structure of the complexion, which has recently been shown to be determined by grain boundary crystallography. To test this hypothesis, molecular dynamics are used here to simulate dislocation absorption and damage nucleation for complexions with different distributions of structural short-range order. Here, the complexion with a more disordered structure away from the dislocation absorption site is actually found to better resist crack nucleation, as damage tolerance requires delocalized deformation and the operation of shear-transformation zones through the complexion thickness. The more damage tolerant complexion accommodates plastic strain efficiently within the entire complexion, providing the key mechanistic insight that local patterning and asymmetry of structural short-range order controls the toughening effect of amorphous complexions.
Ligand Hole Driven Metal–Insulator Transition Exemplified in a Layered Transition Metal Oxide
The interplay of cooperative Jahn–Teller (JT) distortions and charge-disproportionation (CD) with a strong electronic correlation in transition metal oxides leads to structural symmetry breaking. Both JT and CD often manifest in the form of significant modifications in electronic and structural properties such as band splitting, metal–insulator transitions (MIT), and enhanced electron lattice interactions. Notably, the charge-disproportionation is a key electronic feature that drives the MIT. Here, we demonstrate and quantify it using first-principles calculations combining density-functional theory, dynamical mean-field theory, and spin–lattice Monte Carlo simulations. Taking Ca 2 FeMnO 6 as a prototypical example of a correlated oxide, our ab initio study shows that MIT in Ca 2 FeMnO 6 arises from the partial localization of oxygen ligand holes at alternate Fe sites that control both charge and magnetic ordering. Interestingly, the band gap was found to be fundamentally controlled by the strength of the charge-transfer energy and not by the Mott–Hubbard interactions. The novel physics and insights presented in this work reveal promising routes for tuning the electronic functionality in transition-metal oxides.
Unconventional Pathways to Carbide Phase Synthesis via Thermal Decomposition of UI 4 (1,4-dioxane) 2
UI4(1,4-dioxane) 2 was subjected to laser-based heating-a method that enables localized, fast heating (T > 2000 °C) and rapid cooling under controlled conditions (scan rate, power, atmosphere, etc.)-to understand its thermal decomposition. A predictive computational thermodynamic technique estimated the decomposition temperature of UI 4 (1,4-dioxane) 2 to uranium (U) metal to be 2236 °C, a temperature achievable under laser irradiation. Dictated by the presence of reactive, gaseous byproducts, the thermal decomposition of UI 4 (1,4-dioxane) 2 under furnace conditions up to 600 °C revealed the formation of UO 2 , UI x , and U(C 1–x O x ) y , while under laser irradiation, UI 4 (1,4-dioxane) 2 decomposed to UO 2 , U(C 1–x O x ) y , UC 2–z O z , and UC. Despite the fast dynamics associated with laser irradiation, the central uranium atom reacted with the thermal decomposition products of the ligand (1,4-dioxane = C 4 H 8 O 2 ) instead of producing pure U metal. In conclusion, the results highlight the potential to co-develop uranium precursors with specific irradiation procedures to advance nuclear materials research by finding new pathways to produce uranium carbide.
Selective Oxidation and Cr Segregation in High-Entropy Oxide Thin Films
High-entropy oxides (HEOs) offer exceptional compositional flexibility and structural stability, making them promising materials for energy and catalytic applications. Here, in this study, we investigate Sr doping effects on B-site cation oxidation states, local composition, and structure in epitaxial La 1–x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 thin films. X-ray spectroscopies reveal that Sr doping preferentially promotes Cr oxidation from Cr 3+ to Cr 6+ , partially oxidizes Co and Ni, while leaving Mn 4+ and Fe 3+ unchanged. Atomic-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy shows pronounced Cr segregation, with depletion at the interface and enrichment at the surface, along with partial amorphization in heavily Sr-doped samples. This segregation is likely driven by oxidation-induced migration of smaller, high-valence Cr cations during growth. These findings highlight the critical interplay between charge compensation, local strain, and compositional fluctuations in HEOs, indicating that precise control over growth conditions is critical for tuning their surface composition and electronic structure toward more robust electrocatalyst design.
Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores
Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.
Chromophore carbonyl twisting in fluorescent biosensors encodes direct readout of protein conformations with multicolor switching
Fluorescent labeling of proteins is a powerful tool for probing structure-function relationships with many biosensing applications. Structure-based rules for systematically designing fluorescent biosensors require understanding ligand-mediated fluorescent response mechanisms which can be challenging to establish. We installed thiol-reactive derivatives of the naphthalene-based fluorophore Prodan into bacterial periplasmic glucose-binding proteins. Glucose binding elicited paired color exchanges in the excited and ground states of these conjugates. X-ray structures and mutagenesis studies established that glucose-mediated color switching arises from steric interactions that couple protein conformational changes to twisting of the Prodan carbonyl relative to its naphthalene plane. Mutations of residues contacting the carbonyl can optimize color switching by altering fluorophore conformational equilibria in the apo and glucose-bound proteins. A commonly accepted view is that Prodan derivatives report on protein conformations via solvatochromic effects due to changes in the dielectric of their local environment. Here we show that instead Prodan carbonyl twisting controls color switching. These insights enable structure-based biosensor design by coupling ligand-mediated protein conformational changes to internal chromophore twists through specific steric interactions between fluorophore and protein.
Periodic training of creeping solids
Significance It is well appreciated that many disordered materials deform their shape irreversibly (plastically) under an external load (e.g., memory foam). Here, we show that this plasticity can be exploited to train materials to develop novel elastic responses by straining them periodically. By applying different periodic strains to a common viscoelastic material, we are able to design a number of different responses. These include a maximally negative Poisson’s ratio, bistable behavior, and nonlocal bond-specific responses. In contrast to computer-aided design, we rely on plasticity to self-organize the system in response to local stresses. This approach shows promise to achieve an unprecedented control over behavior at large strains well beyond the linear-response regime.
An extreme thermal cycling reliability test of ATLAS ITk Strips barrel modules
At the end of Run 3 of the Large Hadron Collider (LHC), the accelerator complex will be upgraded to the High-Luminosity LHC (HL-LHC) in order to increase the total amount of data provided to its experiments. To cope with the increased rates of data, radiation, and pileup, the ATLAS detector will undergo a substantial upgrade, including a replacement of the Inner Detector with a future Inner Tracker, called the ITk. The ITk will be composed of pixel and strip sub-detectors, where the strips portion will be composed of 17,888 silicon strip detector modules. During the HL-LHC running period, the ITk will be cooled and warmed a number of times from about -35°C to room temperature as part of the operational cycle, including warm-ups during yearly shutdowns. To ensure ITk Strips modules are functional after these expected temperature changes, and to ensure modules are mechanically robust, each module must undergo ten thermal cycles and pass a set of electrical and mechanical criteria before it is placed on a local support structure. This paper describes the thermal cycling Quality Control (QC) procedure, and results from the barrel pre-production phase (about 5% of the production volume). Additionally, in order to assess the headroom of the nominal QC procedure of 10 cycles and to ensure modules don't begin failing soon after, four representative ITk Strips barrel modules were thermally cycled 100 times — this study is also described.
Degradation and deforestation increase the sensitivity of the Amazon Forest to climate extremes
About 40% of the Brazilian Amazon has been deforested or suffered changes in forest structure through degradation (selective logging, fires, and fragmentation). The impact of forest degradation on the forest’s sensitivity to climate extremes has not been fully explored because of a lack of data and the complex interplay of forest structure and climate drivers. Here, we combined forest structure data from 545 airborne lidar transects (375 ha each) across the Brazilian Amazon with the Ecosystem Demography Model (ED2). We explore the forest’s functional response to near-present (1981–2019) climate extremes under observed forest structure from lidar ( Control ) and two forest structure change scenarios: (1) forest recovery by excluding all future deforestation and degradation ( Recovery ) and (2) expansion of selective logging and deforestation ( Degradation ). Using the Control simulation, we found a close and positive association between local forest aboveground biomass and the predicted gross primary productivity (GPP) and evapotranspiration (ET). Moreover, both GPP and ET respond negatively to extremes in vapor pressure deficit and downwelling shortwave irradiance in degraded forests in Eastern and Southern Amazon, indicating high sensitivity to droughts. Locally high-biomass forest patches showed little or no negative response of GPP and ET to extreme drought conditions whereas low-biomass forest patches in the same locations—typically degraded forest canopies—responded negatively to higher moisture stress. The results from the Recovery scenario showed similar results to simulations with observed structure; however, under the Degradation scenario, low-biomass forest patches became more abundant, resulting in more regions where GPP and ET are negatively impacted by hot drought conditions according to the ED2 model. Our results suggest that local forest structure is a critical determinant of an ecosystem’s response to climate variability, and that the loss of canopy trees in the Amazon through forest degradation could increase and expand forest vulnerability to droughts.
Bio‐Imaging quorum sensing signal molecules in a soil‐mimic gel
Rhizosphere, the narrow region surrounding plant roots directly influenced by root exudates and the root associated microbiome, plays an important role in plant productivity and the rhizosphere is well known for stimulating microbial metabolic activities. How microbial communities interact to form stable, metabolically interconnected functional communities is an area of intense interest. The question remains on how microbially produced secreted molecules that function as intercellular communication signals shape the structure and function of microbial communities. Our goal is to detect and quantify signal molecules produced by microbes or plants in the root‐soil environment, spatially and temporarily. As a proof‐of‐concept, we are imaging diffusible extracellular microbial metabolites involved in a bacteria‐bacteria communication process called quorum‐sensing. Quorum‐sensing relies on the accumulation of high concentrations of signal molecules in the environment to control bacterial gene expression, influencing rhizosphere colonization and plant health. Local concentration of quorum sensing molecules are determined using aptamer based sensors. Aptamers that can specifically bind the desired signal molecules are selected through SELEX and immobilized on the surface of nano‐porous membranes. Binding of the signal molecules and aptamer covered surface results in changes in surface charge distribution and steric hinderance and thus modifying the transmembrane ionic transport. Changes in transmembrane impedance can be measured through electrochemical impedance spectroscopy methods to monitor local concentrations of signal molecules. Sensor responses were determined for different concentrations of signal molecules and results showed detection of C4‐HSL in a soil‐mimic solution with K D of 10 nM. We demonstrate that the quorum‐sensing signal molecule C4‐homoserine lactone and (C4‐HSL) can rapidly diffuse in a soil‐mimic gel, providing evidence for our use of a soil‐mimic for further aptasensor development and validation. The sensors were then inserted into soil mimic gel for monitoring C4‐HSL diffusion and the resulted impedance changes were used to determine the C4‐HSL concentration at different positions in the gel. Measurements of local C4‐HSL concentrations variation and numerical solution of diffusion equation were used to create 4D images of C4‐HSL molecule diffusion in the soil‐mimic gel.
Searching for superconductivity in high entropy oxide Ruddlesden?Popper cuprate films
Explore the source record for details and available documents.
Programming twist angle and strain profiles in 2D materials
Moiré superlattices in twisted two-dimensional materials have generated tremendous excitement as a platform for achieving quantum properties on demand. However, the moiré pattern is highly sensitive to the interlayer atomic registry, and current assembly techniques suffer from imprecise control of the average twist angle, spatial inhomogeneity in the local twist angle, and distortions caused by random strain. We manipulated the moiré patterns in hetero- and homobilayers through in-plane bending of monolayer ribbons, using the tip of an atomic force microscope. This technique achieves continuous variation of twist angles with improved twist-angle homogeneity and reduced random strain, resulting in moiré patterns with tunable wavelength and ultralow disorder. Our results may enable detailed studies of ultralow-disorder moiré systems and the realization of precise strain-engineered devices.
Analysis of Integrated Vapor Transport Biases
Abstract High-fidelity analyses and forecasts of integrated vapor transport (VT) are central to the study of Earth’s hydrological cycle as well as high-impact phenomena such as monsoons and atmospheric rivers. The impact of the in-line analysis correction-based additive inflation (ACAI) on IVT biases and forecast errors is examined within the Navy Earth System Prediction Capability (Navy ESPC) global coupled system. The ACAI technique uses atmospheric analysis corrections from the data assimilation system to approximate model bias and as a representation of stochastic model error to simultaneously reduce systematic and random errors and improve ensemble performance. ACAI reduces the global average magnitude of the 7- and 14-day IVT bias by 16%–17% during Northern Hemisphere summer, reaching 70% reductions in some tropical regions. The global average IVT bias reduction is similar to the bias reduction for low-level wind speed bias and considerably smaller than the bias reduction in total precipitable water. The localized regions where ACAI increases IVT bias occur where the control IVT biases change sign and structure with increasing forecast lead time, such as the South Asian monsoon region. Substituting analyzed wind or moisture fields for the forecast fields when calculating the forecast IVT confirms that, on average, wind errors dominate the IVT error calculation in the tropics, although wind and moisture error contributions are comparable in the extratropics. The existence of regions where using either analyzed winds or analyzed moisture increases IVT bias or mean absolute error reveals areas with compensating errors.
The ion-ion correlations in organic ionic plastic crystal
Organic ionic plastic crystals (OIPCs) are emerging as promising electrolyte materials for solid-state batteries. However, despite the fast ionic diffusion, OIPCs exhibit relatively low DC conductivity in solid phases caused by strong ion-ion correlations that suppress charge transport. To understand the origin of this suppression, we performed a study of ion dynamics in the OIPC 1-Ethyl-1-methylpyrrolidinium bis (trifluoromethyl sulfonyl) imide [P 12 ][TFSI] utilizing dielectric spectroscopy, light scattering, and Nuclear Magnetic Resonance diffusometry. Comparison of the results obtained in this study with the published earlier results on an OIPC with a completely different structure (Diethyl(methyl)(isobutyl)phosphonium Hexafluorophosphate [P 1,2,2,4 ][PF 6 ]) revealed strong similarities in ion dynamics in both systems. Unlike DC conductivity, which may drop more than ten times between melted and solid phases, diffusion of anions and cations remains high and does not show strong changes at phase transition. The conductivity spectra in the broad frequency range demonstrate unusual shapes in solid phases with an additional step separating fast local ion motions from suppressed long-range charge diffusion controlling DC conductivity. We suggested that in solid phases, anions and cations can jump only between the specific ion sites defined by the crystalline structure. These constraints lead to strong cation-cation and anion-anion correlations strongly suppressing long-range charge transport.
Functional Assessment of Shell Recharge Solutions' SKY™ Platform OpenADR Capability
The project’s overall objective is to research, develop, and conduct a wide-scale demonstration of a utility smart charge management (SCM) system to develop optimal managed charging structures for grid value, evaluate the impact of EV charging on local distribution utility operations, and evaluate the utilities’ ability to control electronic vehicle (EV) charging load based on grid conditions. This report covers Argonne’s validation testing in the first period of the project, the objective of which was to determine the current managed charging functionality of the EVSE hardware, the network and the vehicle telematics software solution and understand gaps that need to be addressed prior to a large-scale demonstration.
Prototyping of 2D and 3D photonic nanodevices by Electron Beam Lithography (CRADA Final Report)
Team developed a large area and fast electron beam lithographic for patterning visible wavelength optical materials to create 2 or 3 dimensional gratings and metasurfaces. Metasurfaces,are arrays of nanoantennas or optical resonators, are dielectric or plasmonic structures that allow control of the amplitude, phase, and polarization of light by locally modulating its wavefront The team was able to write a 1cm2 pattern with resolution better than 30 nm without visible discontinuities in the pattern. Performance to this specification allowed prototyping of optical lenses for production applications such as augmented reality goggles (optical displays) and other applications for visible light manipulations