Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lithology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Integration of visible-through microwave-range multispectral image data sets for geologic mapping

Multispectral remote sensing data sets collected during the Geologic Remote Sensing Field Experiment (GRSFE) conducted during 1989 in the southwestern U.S. were used to produce thematic image maps showing details of the surface geology. LANDSAT TM (Thematic Mapper) images were used to map the distribution of clays, carbonates, and iron oxides. AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) data were used to identify and map calcite, dolomite, sericite, hematite, and geothite, including mixtures. TIMS (Thermal Infrared Multispectral Scanner) data were used to map the distribution of igneous rock phases and carbonates based on their silica contents. AIRSAR (Airborne Synthetic Aperture Radar) data were used to map surface textures related to the scale of surface roughness. The AIRSAR also allowed identification of previously unmapped fault segments and structural control of lithology and minerology. Because all of the above data sets were geographically referenced, combination of different data types and direct comparison of the results with conventional field and laboratory data sets allowed improved geologic mapping of the test site.

Kruse, Fred A.↗
NASA NTRS1991

Neotectonic studies of northern Baja California, Mexico, with LANDSAT thematic mapper and SPOT panchromatic imagery: Partitioning of dextral and extensional strain at the Pacific-North America plate boundary

Numerous studies of active faulting in southern California indicate that the San Jacinto, Elsinore, and adjacent faults west of the San Andreas fault accommodate a significant proportion of Pacific-North America relative plate motion. Because of the complex distribution of slip, little is known about the activities of these and similar structures in northern Baja California and the southward transition to the oceanic ridge transform-fault system in the Gulf of California. SPOT and LANDSAT Thematic Mapper imagery for northern Baja California was processed to optimize discrimination of lithologic and structural features. This data was used to suggest a preliminary kinematic framework for distribution of relative plate motion between 31 and 33 degrees north, in which continental borderland tectonics play an important role in partitioning of plate motion.

Miller, M. Meghan↗
NASA NTRS1991

Microprobe studies of microtomed particles of white druse salts in shergottite EETA 79001

The white druse material in Antarctic shergottite EETA 79001 has attracted much attention as a possible sample fo Martian aqueous deposits. Instrumental Neutron Activation Analysis (INAA) was used to determine trace element analyses of small particles of this material obtained by handpicking of likely grains from broken surfaces of the meteorite. Electron microprobe work was attempted on grain areas as large as 150x120 microns. Backscattered electron images show considerable variations in brightness, and botryoidal structures were observed. Microprobe analyses showed considerable variability both within single particles and between different particles. Microtomed surfaces of small selected particles were shown to be very useful in obtaining information on the texture and composition of rare lithologies like the white druse of EETA 79001. This material is clearly heterogeneous on all distance scales, so a large number of further analyses will be required to characterize it.

Lindstrom, D. J.↗
NASA NTRS1991

The environmental distribution of late proterozoic organisms

Along present day coast lines, the environmental distributions of prokaryotic and protistan populations are often sharply delimited. Realized habitat ranges are generally narrower than those circumscribed by physiological tolerances, suggesting the importance of organism-organism interactions in the determination of population distributions. Microfossil populations preserved in silicified carbonates, dolomites, and shales of the 700-800 Ma old Akademikerbreen Group, Svalbard, and elsewhere indicate that the environmental distributions were defined equally clearly during the Proterozoic Eon. The Draken Conglomerate Formation is a tidal flat/lagoonal complex in which we have distinguished five principle biofacies containing a total of 42 taxa. Supratidal to subtidal gradients include the increasing abundance and diversity of both mat dweller microbenthos and allochthonous (principally planktonic) organisms, as well as a taphonomically important pattern of decreasing sheath thickness among mat builder microorganisms. The seaward barriers of Akademikerbreen lagoons were oolitic shoals, and these contain about a dozen endolithic and epilithic species not observed elsewhere in the group. Subtidal environments below fair weather wave base are represented by mudstones of the Svanbergfjellet Formation. These contain abundant and diverse cyanobacteria-like fossils generally similar to but specifically different from those found in tidal flat sediments, as well as diverse unicellular protists (some of impressive morphological complexity) and at least half a dozen cellularly preserved metaphyte populations. In all, more than 80 species are distributed among Akademikerbreen lithologies. Fossil assemblages from Svalbard and elsewhere illustrate the potential for a much finer paleoecological, biostratigraphic, and, hence, evolutionary resolution of the early fossil record.

Knoll, A. H.↗
NASA NTRS1992

The distribution of anorthosite on the nearside of the moon

Remote sensing studies of lunar basin and crater deposits were conducted in order to determine the composition of surface units and to investigate the stratigraphy of the lunar crust. These studies have combined both visible and near-IR spectral observations with multispectral imaging in order to determine the lithology of relatively small portions (2-10 km) of the lunar surface. Numerous deposits of pure anorthosite (plagioclase greater than 90 percent) were identified and an interesting pattern has emerged. The purposes of this report are as follows: (1) to summarize the results of our previous studies of the distribution of anorthosite; (2)to present new findings concerning the modes of occurrence of lunar anorthosite; and (3) to assess the implication for the magma ocean hypothesis.

Hawke, B. R.↗
NASA NTRS1992

A new angle on lunar ferroan-suite differentiation

Small fragments of rock found among soil particles in sample 67513 from Station 11 on the southern rim of North Ray Crater at Apollo 16 yield information regarding the mafic, ferroan rocks from which they drive. We have identified a set of particles that have distinctive trace element geochemistry and whose bulk and mineral compositions indicate a genetic relationship to one another. These include polymict as well as monomict lithologies. Igneous members range from fragments with abundant anorthite to some with abundant exsolved pigeonite and augite. Consideration of this set of rock fragments, combined with mafic ferroan clasts from large breccias and from lunar-highlands meteorites suggests that there may be separate differentiation trends within the ferroan suite which are subparallel and which are less steem in Fe-Mg vs. An fractionation that the vertical trend obtained when the entire ferroan suite is taken together. This may result from a complex magma system with isolated reservoirs or separate, independently evolving magmas. Mineral compositional and textural variations are consistent with a model set forth by Longhi and Boudreau wherein the anorthite-rich samples reflect adcumulus growth with mafic crystals forming only from trapped liquid, and the more mafic samples by anorthite and pyroxene orthocumulate development.

Jolliff, B. L.↗
NASA NTRS1992

Magmatic intrusions and hydrothermal systems on Mars

We are continuing our investigation of Martian hydrothermal systems and the formation of fluvial valleys on Mars. Here we present our initial numerical modeling results of hydrothermal systems associated with magmatic intrusions on Mars. To model such hydrothermal systems, we consider single, cylindrical intrusions of 4 km height 2 km below the surface. Our preliminary results of modeling hydrothermal systems associated with magmatic intrusions in the Martian environment suggest that such systems, if associated with intrusions of several 10(exp 2) km(exp 3) or larger, in the presence of permeable, water-rich subsurface should be able to provide adequate discharges of water over the time periods needed to form fluvial valleys. However, it is important to note that the amount of water ultimately available for erosion also depends on the surface and subsurface lithology.

Gulick, V. C.↗
NASA NTRS1992

The stable isotopic compositions of indigenous carbon-bearing components in EETA 79001

It is now widely accepted that the most likely source of SNC meteorites is Mars. An oblique impact on Mars, or vaporization of permafrost, by an impactor seem to be the most likely ejection mechanisms capable of accelerating material to the 5 km/s velocity needed to overcome the gravitational field of Mars. These ejection mechanisms involve a large shock event in the SNC class, the shergottites EETA 79001 and ALHA 77055 are the most likely shocked samples, in which whole rock pressures of 35 to 45 GPa have been estimated. Martian weathering products have also been identified in EETA 79001. Here, the author started a series of analyses of EETA 79001 using a high-sensitivity static mass spectrometer capable of measuring sub-nanogram quantities of carbon. Recent measurements of lithology C confirm that the shock-implanted atmospheric CO2 is released during the 1100 to 1200 C step.

Hartmetz, C. P.↗
NASA NTRS1991

Paired lunar meteorites MAC88104 and MAC88105 - A new 'FAN' of lunar petrology

To determine the chemical characteristics of the MAC88104/5 meteorite six thin sections and three bulk samples were analyzed by electron microprobe and instrumental neutron activation. It is concluded that this meteorite is dominated by lithologies of the ferroan anorthosite suite and contains abundant granulitized highland clasts, devitrified glass beads of impact origin, and two small clasts of basaltic origin. It is suggested that one of these basaltic clasts, clast E, is mesostasis material, and clast G is similar to the very low-Ti or low-Ti/high-alumina mare basalts. Impact melt clasts MAC88105, 69, and 72 have major and trace element compositions similar to the bulk meteorite.

Neal, Clive R.↗
NASA NTRS1992

Fall days of the SNC meteorites - Evidence for an SNC meteoroid stream, and a common site of origin

Four of the SNC meteorites of putative Martian origin are falls. Two of these fell on October 3: Chassigny in 1815 and Zagami in 1962. The probability of this coincidence arising from random fall days is approximately 1 in 60. If this coincidence is not the result of chance, it suggests that some of the SNC meteorites are derived from a meteoroid stream. In that Chassigny and Zagami span nearly the full range of SNC lithologies and histories, the coincidence of fall days is consistent with suggestions that all of the SNCs came from a single site (impact crater) on their parent planet.

Treiman, Allan H.↗
NASA NTRS1992

Research core drilling in the Manson impact structure, Iowa

The Manson impact structure (MIS) has a diameter of 35 km and is the largest confirmed impact structure in the United States. The MIS has yielded a Ar-40/Ar-39 age of 65.7 Ma on microcline from its central peak, an age that is indistinguishable from the age of the Cretaceous-Tertiary boundary. In the summer of 1991 the Iowa Geological Survey Bureau and U.S. Geological Survey initiated a research core drilling project on the MIS. The first core was beneath 55 m of glacial drift. The core penetrated a 6-m layered sequence of shale and siltstone and 42 m of Cretaceous shale-dominated sedimentary clast breccia. Below this breccia, the core encountered two crystalline rock clast breccia units. The upper unit is 53 m thick, with a glassy matrix displaying various degrees of devitrification. The upper half of this unit is dominated by the glassy matrix, with shock-deformed mineral grains (especially quartz) the most common clast. The glassy-matrix unit grades downward into the basal unit in the core, a crystalline rock breccia with a sandy matrix, the matrix dominated by igneous and metamorphic rock fragments or disaggregated grains from those rocks. The unit is about 45 m thick, and grains display abundant shock deformation features. Preliminary interpretations suggest that the crystalline rock breccias are the transient crater floor, lifted up with the central peak. The sedimentary clast breccia probably represents a postimpact debris flow from the crater rim, and the uppermost layered unit probably represents a large block associated with the flow. The second core (M-2) was drilled near the center of the crater moat in an area where an early crater model suggested the presence of postimpact lake sediments. The core encountered 39 m of sedimentary clast breccia, similar to that in the M-1 core. Beneath the breccia, 120 m of poorly consolidated, mildly deformed, and sheared siltstone, shale, and sandstone was encountered. The basal unit in the core was another sequence of sedimentary clast breccia. The two sedimentary clast units, like the lithologically similar unit in the M-1 core, probably formed as debris flows from the crater rim. The middle, nonbrecciated interval is probably a large, intact block of Upper Cretaceous strata transported from the crater rim with the debris flow. Alternatively, the sequence may represent the elusive postimpact lake sequence.

Anderson, R. R.↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Sr-Nd in heterolithic breccias and gabbroic dikes

One major objective of our Sudbury project was to define origin and age of the huge breccia units below and above the Sudbury Igneous Complex (SIC). The heterolithic Footwall Breccia (FB) represents a part of the uplifted crater floor. It contains subrounded fragments up to several meters in size and lithic fragments with shock features (greater than 10 GPa) embedded into a fine- to medium-grained matrix. Epsilon(sub Nd)-epsilon(sub Sr) relationships point to almost exclusively parautochthonous precursor lithologies. The different textures of the matrix reflect the metamorphic history of the breccia layer; thermal annealing by the overlying hot impact melt sheet (SIC) at temperatures greater than 1000 C resulted in melting of the fine crushed material, followed by an episode of metasomatic K-feldspar growth and, finally, formation of low-grade minerals such as actinolite and chlorite. Isotope relationships in the Onaping breccias (Gray and Green Member) are much more complex. All attempts to date the breccia formation failed: Zircons are entirely derived from country rocks and lack the pronounced Pb loss caused by the heat of the slowly cooling impact melt sheet (SIC). Rb-Sr techniques using either lithic fragments of different shock stages or the thin slab method, set time limits for the apparently pervasive alkali mobility in these suevitic breccias. The data array and the intercept in the plots point to a major Rb-Sr fractionation around 1.54 Ga ago. This model age is in the same range as the age obtained for the metasomatic matrix of the FB. Rb-Sr dating of a shock event in impact-related breccias seems to be possible only if their matrix had suffered total melting by the hot melt sheet (FB) or if they contain a high fraction of impact melt (suevitic Onaping breccias), whereas the degree of shock metamorphism in rock or lithic fragments plays a minor role. In the Sudbury case, however, the impact melt in the seuvitic breccias is devitrified and recrystallized, which changed Rb/Sr ratios quite drastically. Therefore, the Onaping breccias give only age limits for alteration and low-grade metamorphism. The Sm-Nd system was not reset during the Sudbury event; clasts as well as the matrix in the FB and in the Onaping breccias show preimpact 'Archean' Nd isotope signatures.

Buhl, D.↗
NASA NTRS1992

Large impacts in the Baltic shield with special attention to the Uppland structure

Within the Baltic Shield several very large structures have been identified and are suspected to be of meteorite impact origin. Some of these deeply eroded circular features are presented with special attention to the Uppland structure, where several indications point toward an impact origin in the mid-Proterozoic. The structures exceed 100 km in diameter and the topographic expression is inferior or absent. An arcuate arrangement of lithologies occurs around the margin of the structures and the central regions show conform magnetic and positive gravity anomalies. The Uppland structure is approximately 320 km in diameter as expressed by morphological, geological, and geophysical concentric patterns. The central part is topographically remarkably flat and is characterized by an unusual irregular fracture pattern. A subcircular central tonalite with density of 2.81 Mg(sup -3) gives a positive gravity anomaly of 35 mgal and the gravimetric profile is very similar to that of Manicouagan and Vredefort. The tonalite constitutes a huge antiform, 80 km in diameter, probably representing a 12-km structural uplift of infracrustal rocks. The flancs of the tonalite are characterized by recrystallized pseudotachylitic breccia dykes and breccia zones. Around the central parts amphibolite-grade metamorphic rocks appear as large fragments within a fine-grained granite interpreted as a thermally annealed melt rock. Several occurrences of breccia dykes and breccia-bearing melts have been identified about 100 km from the gravimetric center of the structure. Impact-related ore deposits are located around the margin of the structure and are interpreted as preexisting downfaulted iron formations, and deposits formed from remobilization of these preimpact occurrences. The so-called ball ores are interpreted to have formed by fluid injection similar to the formation of breccia dykes. The extensive hydrothermal alteration along the outer margin of the structure have created extreme soda and K-enriched rocks ('leptites') from preexisting gneiss granites and supracrustal sedimentary gneisses.

Henkel, H.↗
NASA NTRS1992

Viscosity determinations of some frictionally generated silicate melts: Implications for slip zone rheology during impact-induced faulting

Analytical scanning electron microscopy, using combined energy dispersive and wavelength dispersive spectrometry, was used to determine the major-element compositions of some natural and artificial glasses and their crystalline equivalents derived by the frictional melting of acid to intermediate protoliths. The major-element compositions are used to calculate the viscosities of their melt precursors using the model of Shaw at temperatures of 800-1400 C, with Fe(2+)/Fe(tot) = 0.5 and for 1-3 wt percent H2O. These results are then modified to account for suspension effects in order to determine viscosities. The results have implications for the generation of pseudotachylitic breccias as seen in the basement lithologies of the Sudbury and Vredefort structures and possibly certain dimict lunar breccias. Many of these breccias show similarities with the more commonly developed pseudotachylite fault and injection veins seen in endogenic fault zones that typically occur in thicknesses of a few centimeters or less. The main difference is one of scale: Impact-induced pseudotachylite breccias can attain several meters in thickness. This would suggest that they were generated under exceptionally high slip rates and hence high strain rates and that the friction melts generated possessed extremely low viscosities.

Spray, John G.↗
NASA NTRS1992

Workshop on Geology of the Apollo 17 Landing Site

The topics covered include the following: petrology, lithology, lunar rocks, lunar soil, geochemistry, lunar geology, lunar resources, oxygen production, ilmenite, volcanism, highlands, lunar maria, massifs, impact melts, breccias, lunar crust, Taurus-Littrow, minerals, site selection, regolith, glasses, geomorphology, basalts, tectonics, planetary evolution, anorthosite, titanium oxides, chemical composition, and the Sudbury-Serenitatis analogy.

Ryder, G.↗
NASA NTRS1992

Basaltic impact melts in the Apollo collections: How many impacts and which events are recorded?

Many of the rocks in the Apollo collections from the lunar highlands are impact melt breccias of basaltic bulk composition. They are known by a variety of names including low-K Fra Mauro basalt, VHA basalt, and basaltic impact melts. These rocks have been studied to understand the compositional nature of the lunar crust, to decipher the processes of large body impact, and to comprehend the record of impact bombardment of the Moon. Study of terrestrial craters has led to a model for impact melt generation whereby target lithologies are totally melted during impact. The impact melt makes up a few percent of the total volume of crater material; superheated silicate liquids of the impact melt have extremely low viscosities and mix intimately. This mixing thoroughly homogenizes the melt chemically during the excavation of the crater. Colder, unmelted debris is overridden by the melt sheet as the crater cavity grows. Incorporation of these cold clasts rapidly chills the melt, with zones of greater and lesser amounts of clasts being primarily responsible for modestly differing thermal regimes. The net effect of this process is the production of a suite of rocks that have extreme chemical homogeneity, but wide petrographic diversity. Strict application of this model to the petrogenesis of basaltic impact melts from the Moon has some fairly significant consequences for how we interpret early lunar history. The consequences are briefly discussed.

Spudis, Paul D.↗
NASA NTRS1992

Isotopic signatures of black tektites from the K-T boundary on Haiti - Implications for the age and type of source material

An isotopic study was carried out to characterize the type of black tektites from the Cretaceous-Tertiary (K-T) boundary on Haiti (the first reasonably well-preserved impact-derived material recovered from the K-T boundary), in order to help characterize the tektite source material (i.e., the type of rocks that were melted and ejected during the impact event(s) at around 64.5 Ma). Results show that the isotopic data and all of the element concentration data obtained are consistent with an andesitic-dacitic composition for the tektites and their source material. The Nd isotopic data suggest that the source rocks were not older than Silurian (T(chur) = 400 Ma) in age, and were composed largely of young (less than 1080 Ma) crustal material. Of the suspected K-T boundary impact sites, both the Manson (Iowa) and Chicxulub (Yucatan) structures occur in suitable lithologies to yield the Haitian black tektites.

Premo, W. R.↗
NASA NTRS1991

Spectral stratigraphy

A new approach to stratigraphic analysis is described which uses photogeologic and spectral interpretation of multispectral remote sensing data combined with topographic information to determine the attitude, thickness, and lithology of strata exposed at the surface. The new stratigraphic procedure is illustrated by examples in the literature. The published results demonstrate the potential of spectral stratigraphy for mapping strata, determining dip and strike, measuring and correlating stratigraphic sequences, defining lithofacies, mapping biofacies, and interpreting geological structures.

Lang, Harold R.↗