Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Fine pointing of Laser Beams by using Laser Arrays for Applications to CubeSats

A method of fine pointing of laser beams by using laser arrays has been developed. The telescope system combines a lens system and a VCSEL/Photodetector Array. It does not use moving parts. In computer simulations, it is applied to CubeSats that use body pointing. Body pointing was used by the Aerospace Corporation for CubeSats in LEO in NASA’s Optical Communications and Sensors Demonstration (OCSD) program. Computer simulations of this fine pointing capability have been applied previously to CubeSats in the OCSD program. In this paper, computer simulations of laser pointing using this telescope design are applied to CubeSats in LLO, at 100 km. These CubeSats could form part of the LunaNet, the lunar communications and navigation network, part of the NASA ARTEMIS Program. With more accurate pointing, a laser beam with smaller divergence can be used. For the case of the AeroCube-7B vehicle that was used in the OCSD program, computer simulations will show, for example, that the divergence of the output beam can be reduced from approximately 0.06° FWHM to 0.014°. For the proposed electro-optical system, reaction times to pointing changes and vibrations are on a nanosecond time scale, much faster than those for fine pointing systems that use moving parts such as fast steering mirrors, including MEMS, or that use quad-cell photodetectors to improve the body pointing of the CubeSat. Other possible applications are to Optical Multiple Access (OMA)for simultaneously communicating with ground stations at different locations and to Wavelength-Division Multiplexing (WDM)for increasing data rate transmission.

SMD↗

Fine Pointing of Laser Beams by Using Laser Arrays for Applications to CubeSats

A method of fine pointing of laser beams by using laser arrays has been developed. The telescope system combines a lens system and a VCSEL/Photodetector Array. It does not use moving parts. In computer simulations, it is applied to CubeSats that use body pointing. Body pointing was used by the Aerospace Corporation for CubeSats in LEO in NASA’s Optical Communications and Sensors Demonstration (OCSD) program. Computer simulations of this fine pointing capability have been applied previously to CubeSats in the OCSD program. In this paper, computer simulations of laser pointing using this telescope design are applied to CubeSats in LLO, at 100 km. These CubeSats could form part of the LunaNet, the lunar communications and navigation network, part of the NASA ARTEMIS Program. With more accurate pointing, a laser beam with smaller divergence can be used. For the case of the AeroCube-7B vehicle that was used in the OCSD program, computer simulations will show, for example, that the divergence of the output beam can be reduced from approximately 0.06° FWHM to 0.014°. For the proposed electro-optical system, reaction times to pointing changes and vibrations are on a nanosecond time scale, much faster than those for fine pointing systems that use moving parts such as fast steering mirrors, including MEMS, or that use quad-cell photodetectors to improve the body pointing of the CubeSat. Other possible applications are to Optical Multiple Access (OMA)for simultaneously communicating with ground stations at different locations and to Wavelength-Division Multiplexing (WDM)for increasing data rate transmission.

HEC↗

Laser Safety at NASA’s New Laser Ranging Stations

Laser safety has been a critical part of the NASA’s satellite laser ranging stations for many decades. As the new Space Geodesy Satellite Laser Ranging (SGSLR) systems complete development and begin integration/testing, they have had to adapt to evolving technologies and regulation changes. NASA’s SGSLR system will be deployed in many parts of the world, each with their own local safety framework and specific concerns. We describe the status, methods, and technologies of laser safety that are being implemented for our current scheduled deployment of SGSLR stations. We pay special attention to our partnership with the Norwegian Mapping Authority, and our collaboration in deployment of SGSLR in Ny Ålesund, Svalbard.

Evan Hoffman↗

Laser desorption ionization and peptide sequencing on laser induced silicon microcolumn arrays

The present invention provides a method of producing a laser-patterned silicon surface, especially silicon wafers for use in laser desorption ionization (LDI-MS) (including MALDI-MS and SELDI-MS), devices containing the same, and methods of testing samples employing the same. The surface is prepared by subjecting a silicon substrate to multiple laser shots from a high-power picosecond or femtosecond laser while in a processing environment, e.g., underwater, and generates a remarkable homogenous microcolumn array capable of providing an improved substrate for LDI-MS.

47 OTHER INSTRUMENTATION↗

Laser fusion neutron source employing compression with short pulse lasers

A method and system for achieving fusion is provided. The method includes providing laser source that generates a laser beam and a target that includes a capsule embedded in the target and filled with DT gas. The laser beam is directed at the target. The laser beam helps create an electron beam within the target. The electron beam heats the capsule, the DT gas, and the area surrounding the capsule. At a certain point equilibrium is reached. At the equilibrium point, the capsule implodes and generates enough pressure on the DT gas to ignite the DT gas and fuse the DT gas nuclei.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser Source Influence on the Preferential Growth and the Inversion Degree in Pulsed Laser CoFe{sub 2}O{sub 4} Films

A comparative study between cobalt ferrite films deposited by pulsed laser deposition as a function of the laser sources, 355 nm (Nd:YAG) and 248 nm (KrF excimer), on amorphous quartz (AQ) and < 100 > -oriented silicon wafer (SW) at different temperatures (650–800 {sup ∘}C) is presented. Also, a quantitative estimation of the preferential crystalline growth orientation as laser source function was made by means of Lotgering factor and Harris texture coefficient, which were obtained from XRD patterns. The inversion degree in spinel-type structure for cobalt ferrite films was calculated through a deconvolution in Raman spectra, where the band A{sub 1g} vibrating modes in tetrahedral sites were associated with Fe and Co sites (687 and 611 cm{sup −1}, respectively). Additionally, saturation magnetization was also calculated from the inversion degree obtained from deconvolution of the Raman spectra in CoFe{sub 2}O{sub 4} films, being compared with experimental results, which is in a good agreement with cobalt ferrite bulk, and we also correlated the preferential growth and the particle size with increment of the coercive field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy

The objective of this study is to quantify the melt pool dynamics during continuous-wave laser remelting of a Co-Cr alloy manufactured using selective laser melting. This knowledge will inform process improvement and numerical modeling of laser remelting. A high-intensity x-ray beam imaged a 2 mm × 0.5 mm area of the surface with a 50 kHz framerate. Analysis of these videos quantified the melt pool surface wave movement and compared this to the initial surface features. Here, the results indicate that the keyhole and its characteristic oscillations can suppress large wavelength features on the initial surface.

36 MATERIALS SCIENCE↗

Effect of laser pulse parameters on the size and fluorescence of nanodiamonds formed upon pulsed-laser irradiation

The size of nanodiamonds formed upon laser irradiation could be easily controlled over simply adjusting laser pulse parameters. The stable size and structure of nanodiamonds were mostly determined by laser power density and pulse width. Both large nanodiamonds with multiply twinning structure (MTS) and small nanodiamonds with single crystalline structure (SCS) emitted strong visible light after surface passivation, and their fluorescence quantum yield (QY) was 4.6% and 7.1%, respectively.

36 MATERIALS SCIENCE↗

Development of high damage threshold laser-machined apodizers and gain filters for laser applications

We have developed high damage threshold filters to modify the spatial profile of a high energy laser beam. The filters are formed by laser ablation of a transmissive window. The ablation sites constitute scattering centers which can be filtered in a subsequent spatial filter. Finally, by creating the filters in dielectric materials, we see an increased laser-induced damage threshold from previous filters created using ‘metal on glass’ lithography.

47 OTHER INSTRUMENTATION↗

Different effects of a laser prepulse on the proton generation between plastic and metal targets irradiated by an ultraintense laser pulse

The effect of a laser prepulse on the generation of proton beams is compared between plastic and metal targets by irradiating a 30 fs, 2.4x10{sup 18} W/cm{sup 2} Ti:sapphire laser pulse. Proton energies generated from both target materials increase as the pulse duration of the laser prepulse decreases. However, it was found that there are distinct differences with respect to target materials. In the case of aluminum targets, as target thickness decreases, proton energy gets higher, which is well described by an isothermal expansion model. However, in the case of Mylar targets, no such dependence on target thickness could be observed, and the highest maximum proton energies are higher by factors of 1.5 to 3 than those from aluminum targets or those predicted by the isothermal expansion model. Such characteristics of the proton beams from Mylar targets can be accounted for by a bulk acceleration model, or acceleration by a resistively induced electric field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport study of intense-laser-produced fast electrons in solid targets with a preplasma created by a long pulse laser

The effect of preplasma on fast electron generation and transport has been studied using an intense-laser pulse (I=2x10{sup 18} W/cm{sup 2}) at the Osaka University. An external long pulse laser beam (E<1.5 J) was used to create various levels of preplasmas in front of a planar target for a systematic study. Kalpha x-ray emission from a fluorescence layer (copper) was absolutely counted and its spatial distribution was monitored. Experimental data show Kalpha x-ray signal reduction (up to 60%) with an increase in the preplasma level. In addition, a ring structure of Kalpha x rays was observed with a large preplasma. The underlying physics of the ring structure production was studied by integrating the modeling using a radiation hydrodynamics code and a hybrid particle-in-cell code. Modeling shows that the ring structure is due to the thermoelectric magnetic field excited by the long pulse laser irradiation and an electrostatic field due to the fast electrons in the preplasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of laser parameters to obtain high-energy, high-quality electron beams through laser-plasma acceleration

The propagation of an intense (a{sub 0}=3), short-pulse (L{approx}{lambda}{sub p}) laser through a homogeneous plasma has been investigated. Using two-dimensional simulations for a{sub 0}=3, the pulse-length and spot-size at three different plasma densities were optimized in order to get a better quality beam in laser wakefield accelerator. The study reveals that with increasing pulse-length the acceleration increases, but after a certain pulse-length (L>0.23{lambda}{sub p}) the emittance blows-up unacceptably. For spot-sizes less than that given by k{sub p0}r{sub s}=2{radical}(a{sub 0}), trapping is poor or nonexistent, and the optimal spot-size is larger. The deviation of the optimal spot-size from this formula increases as the density decreases. The efficacy of these two-dimensional simulations has been validated by running three-dimensional simulations at the highest density. It has been shown that good quality GeV-class beams can be obtained at plasma densities of {approx}10{sup 18} cm{sup -3}. The quality of the beam can be substantially improved by selecting only the high-energy peak; in this fashion an energy-spread of better than 1% and a current in tens of kA can be achieved, which are important for applications such as free-electron lasers.

43 PARTICLE ACCELERATORS↗

Efficient laser absorption and enhanced electron yield in the laser-target interaction by using a cone-nanolayer target

A cone-nanolayer target that combines the advantages of the conical and layered geometries for electron acceleration in laser-target interaction is proposed. Two-dimensional particle-in-cell (PIC) simulations show that the cone-nanolayer target can enhance laser absorption and electron yield. With suitable choice of the laser and target parameters, the cone-nanolayer target can be a controllable source of hot electrons at desired energy ranges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Employing laser-accelerated proton beams to diagnose high intensity laser-plasma interactions

A review of the proton radiography technique will be presented. This technique employs laser-accelerated laminar bunches of protons to diagnose the temporal and spatial characteristic of the electric and magnetic fields generated during high-intensity laser-plasma interactions. The remarkable temporal and spatial resolution that this technique can achieve (of the order of a picosecond and a few microns respectively) candidates this technique as the preferrable one, if compared to other techniques, to probe high intensity laser-matter interactions.

43 PARTICLE ACCELERATORS↗

Laser damage threshold measurements of optical materials for direct laser accelerators

The laser-damage threshold is a fundamental limit for any dielectric laser-driven accelerator and is set by the material of the structure. In this paper, we present a theoretical model of the laser damage mechanism, in comparison with experimental data on the damage threshold of silicon. Additionally, we present damage threshold measurement data of various optical materials, most of which have not been previously characterized in the picosecond-regime.

36 MATERIALS SCIENCE↗

Comparisons of angularly and spectrally resolved Bremsstrahlung measurements to two-dimensional multi-stage simulations of short-pulse laser-plasma interactions

A 2-D multi-stage simulation model incorporating realistic laser conditions and a fully resolved electron distribution handoff has been developed and compared to angularly and spectrally resolved Bremsstrahlung measurements from high-Z planar targets. For near-normal incidence and 0.5-1 × 10{sup 20} W/cm{sup 2} intensity, particle-in-cell (PIC) simulations predict the existence of a high energy electron component consistently directed away from the laser axis, in contrast with previous expectations for oblique irradiation. Measurements of the angular distribution are consistent with a high energy component when directed along the PIC predicted direction, as opposed to between the target normal and laser axis as previously measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-step laser ionization schemes for in-gas laser ionization and spectroscopy of radioactive isotopes

The in-gas laser ionization and spectroscopy technique has been developed at the Leuven isotope separator on-line facility for the production and in-source laser spectroscopy studies of short-lived radioactive isotopes. In this article, results from a study to identify efficient optical schemes for the two-step resonance laser ionization of 18 elements are presented.

07 ISOTOPE AND RADIATION SOURCES↗