SEARCH · Engineering Papers

Results for “interior methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Imparting Barely Visible Impact Damage to a Stitched Composite Large-Scale Pressure Box

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is a concept that was developed by The Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body (HWB) aircraft configuration, which has been a focus of the NASA Environmentally Responsible Aviation Project. The NASA-Boeing structural development for the HWB aircraft culminated in testing of the multi-bay box, which is an 80%-scale representation of the pressurized center-body section. This structure was tested in the NASA Langley Research Center Combined Loads Test System facility. As part of this testing, barely visible impact damage was imparted to the interior and exterior of the test article to demonstrate compliance with a condition representative of the requirements for Category 1 damaged composite structure as defined by the Federal Aviation Regulations. Interior impacts were imparted using an existing spring-loaded impactor, while the exterior impacts were imparted using a newly designed, gravity-driven impactor. This paper describes the impacts to the test article, and the design of the gravitydriven guided-weight impactor. The guided-weight impactor proved to be a very reliable method to impart barely visible impact damage in locations which are not easily accessible for a traditional drop-weight impactor, while at the same time having the capability to be highly configurable for use on other aircraft structures.

Lovejoy, Andrew E.↗

NASA NTRS1972

Preparation, verification, and operational control of a large space-environment-simulation chamber for contamination sensitive tests

A 2-year program to prepare chamber A at the NASA Manned Spacecraft Center for Apollo telescope mount thermal-vacuum tests is discussed. This program covers modification to existing chamber systems, the development of facility and chamber operating procedures, the selection of chamber cleaning and control methods, and the development and evaluation of diagnostic instrumentation. Extensive efforts to ensure a minimum contamination environment for the Apollo telescope mount test series are illustrated. Recent thermal-vacuum tests of this chamber at progressive stages of cleanliness have demonstrated the success achieved in reducing the particulate and molecular contamination levels of the basic chamber interior.

Visentine, J. T.↗

NASA NTRS1986

Application of TIMS data in stratigraphic analysis

An in-progress study demonstrates the utility of Thermal Infrared Multispectral Scanner (TIMS) data for unraveling the stratigraphic sequence of a western interior, North American foreland basin. The TIMS data can be used to determine the stratigraphic distribution of minerals that are diagnostic of specific depositional distribution. The thematic mapper (TM) and TIMS data were acquired in the Wind River/Bighorn area of central Wyoming in November 1982, and July 1983, respectively. Combined image processing, photogeologic, and spectral analysis methods were used to: map strata; construct stratigraphic columns; correlate data; and identify mineralogical facies.

Lang, H. R.↗

NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

This report describes a numerical method for generating 3-D grids for general configurations. The basic method involves the solution of a set of quasi-linear elliptic partial differential equations via pointwise relaxation with a local relaxation factor. It allows specification of the grid spacing off the boundary surfaces and the grid orthogonality at the boundary surfaces. It includes adaptive mechanisms to improve smoothness, orthogonality, and flow resolution in the grid interior.

Chen, S. C.↗

NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

Chen, S. C.↗

NASA NTRS1977

A research program to reduce interior noise in general aviation airplanes. Design of an acoustic panel test facility

The design, construction, and costs of a test facility for determining the sound transmission loss characteristics of various panels and panel treatments are described. The pressurization system and electronic equipment used in experimental testing are discussed as well as the reliability of the facility and the data gathered. Tests results are compared to pertinent acoustical theories for panel behavior and minor anomalies in the data are examined. A method for predicting panel behavior in the stiffness region is also presented.

Roskam, J.↗

DOE OSTI2021

Uniform convergence of an upwind discontinuous Galerkin method for solving scaled discrete-ordinate radiative transfer equations with isotropic scattering

Here we present an error analysis for the discontinuous Galerkin (DG) method applied to the discrete-ordinate discretization of the steady-state radiative transfer equation with isotropic scattering. Under some mild assumptions, we show that the DG method converges uniformly with respect to a scaling parameter which characterizes the strength of scattering in the system. However, the rate is not optimal and can be polluted by the presence of boundary layers. In one-dimensional slab geometries, we demonstrate optimal convergence when boundary layers are not present and analyze a simple strategy for balance interior and boundary layer errors. Some numerical tests are also provided in this reduced setting.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Development of Multi-Filament Textured-Powder Bi-2212/Ag Wire with Enhanced Local Area Ratio (Final Technical Report)

ATC has successfully developed a new method for making high-performance Bi-2212/Ag su-perconducting wire with a favorable local area ratio (LAR)=Ag:Bi-2212. The method begins by texturing a fine powder of Bi-2212: the powder is loaded uniformly into an open-sided silver foil channel, the flaps of foil are folded over the powder filling, and the package is hydraulically com-pressed in a die set to form a textured-powder (TP) bar. XRD analysis of the interior powder in a compressed bar shows a texture of 80% after 200 MPa compression.

36 MATERIALS SCIENCE↗

NASA NTRS1979

Noise transmission - Turboprop problem

An analytical model is presented to predict low frequency (1000 Hz and below) noise transmission into aircraft. Noise transmission is determined by solving the acoustic wave equation for the interior noise field, the equivalent 'smeared' monocoque shell equation for overall fuselage vibrations and skin-stringer panel equation for local vibrations of panels and stringers. The solution to this system of equations is obtained by using a Galerkin-like procedure. The modes and frequencies for skin-stringer panels are determined by a transfer matrix method. Results include noise transmission through discretely stiffened panels and cabin noise due to turbulent boundary layer and propeller passage harmonics for a turboprop type aircraft.

Vaicaitis, R.↗

NASA NTRS1980

Axial rotation, tangled magnetic fields, and theoretical models of very massive stars

A simple method of computing theoretical models of very massive stars endowed with fast axial rotation and tangled magnetic fields is described and used in the present paper. Both of the two perturbing (nongravitational) forces induce changes in the luminosity and radius that are studied as functions of zero-age chemical composition, opacity, and evolutionary state of the interior. The central condensation of the star is found to have a significant influence on shifts of the upper main-sequence band in the H-R diagram if the perturbing force is concentrated in the stellar envelope (but not if the perturbing force is distributed so as to be approximately proportional to gravity everywhere); the layers of the envelope that contribute most heavily to the central condensation lie approximately at a radius fraction of r/R = 0.5. It is shown that fast uniform rotation and intense envelope magnetic fields lead to probably the largest possible shifts of the main-sequence band in the H-R diagram that rotation and magnetic fields can induce. These displacements are, however, too small to account for the total width of the observed main-sequence band at luminosities brighter than log (L/solar luminosity) = 4.5.

Stothers, R.↗

NASA NTRS1983

Moisture absorption characteristics of the Orbiter thermal protection system and methods used to prevent water ingestion

The Space Shuttle Orbiter's silica tile Thermal Protection System (TPS) is beset by the moisture absorption problems inherently associated with low density, highly porous insulation systems. Attention is presently given to the comparative success of methods for the minimization and/or prevention of water ingestion by the TPS tiles, covering the development of water-repellent agents and their tile application techniques, flight test program results, and materials improvements. The use of external films for rewaterproofing of the TPS tiles after each mission have demonstrated marginal to unacceptable performance. By contrast, a tile interior waterproofing agent has shown promise.

Schomburg, C.↗

DOE OSTI2022

Alternating chempolishing and electropolishing for interior and exterior surface finishing of additively manufactured (AM) metal components

Additively manufactured (AM) components’ surface finishing is crucial in adopting them for intended applications in challenging environments involving fatigue, corrosion, high temperature, and nuclear radiation. In our prior research, chempolishing (C) was utilized as an electroless etching process that uniformly smoothens complex AM components’ accessible interior and exterior surfaces (Tyagi et al. Additive Manufacturing, 25:32–38, 22). A wide range of electropolishing (E) has been demonstrated for AM surface finishing. However, electropolishing can impact a surface that can be juxtaposed to counter electrode and can yield a very smooth surface to sub-micrometer level roughness. However, a knowledge gap exists about the impact of applying both approaches on the same surface one after another and what new advantages may arise because of combining two methods. This paper uses dual-stage liquid-based surface finishing strategies produced by alternating the chempolishing (C) and electropolishing (E) steps. Two dual-stage surface finishing approaches, i.e., chempolishing followed by electropolishing (CE) and electropolishing followed by chempolishing (EC), were performed on the 316 stainless AM steel component. Impacts of EC and CE approaches were compared with single-stage C and E surface finishing approaches. An optical microscope and mechanical profilometer were utilized to investigate the wide range of surface roughness parameters. CE and EC produced Ra ~ 1.4 µm and ~ 1.6 µm, respectively. Surface roughness on CE- and EC-treated AM samples was lower than those individually treated by C and E approaches. Scanning electron microscopy provided further insights into the microstructural difference between CE- and EC-treated AM samples. This paper reports a liquid contact angle study on CE- and EC-treated AM samples to provide insights into the relative difference in surface energy that is crucial for making coatings on AM parts. A spectroscopic reflectance study was also employed to register the difference in physical properties of AM components treated with CE and EC approaches. Further, this study reveals industrially practicable interior and exterior surface finishing approaches for complex AM metal components that require minimum tooling and real-time process monitoring.

36 MATERIALS SCIENCE↗

NASA NTRS1973

Function space quasi-Newton algorithms for optimal control problems with bounded controls and singular arcs

Two existing function space algorithms, Davidon and projected gradient, are modified so that they may handle directly control variable inequality constraints. A third quasi-Newton type algorithm developed by C. G. Broyden is extended to optimal control problems. The Broyden algorithm is further modified so that it also may handle directly control variable inequality constraints. These methods along with a pure gradient and two conjugate gradient algorithms are simulated on three relatively simple yet representative bounded control problems, two of which have singular subarcs. Overall the Broyden algorithm was found to be superior. The most notable result of the study was the clear superiority of the Broyden and Davidon algorithms in producing a sharp interior control subarc.

Edge, E. R.↗

NASA NTRS1982

Asymptotic Expansions and Estimates for the Capillary Problem

The asymptotic properties for the small Bond number B of the equilibrium capillary interface interior to a circular cylindrical tube vertically dipped in an infinite reservoir of liquid are discussed. (The Bond number B is a dimensionless parameter which is the ratio of gravitational to capillary forces.) The formal expansion in powers of B of the solution to the differential equation describing the equilibrium surface (as can be obtained by standard perturbation methods) is proved to be truly asymptotic -- to all orders and uniformly in the variable and parameter gamma, the contact angle. Sequences of general estimates, in closed form, from above and from below, are also given for the solution and related functions. The M-th term in these sequences are asymptotically exact to order m. An idiosyncrasy of the problem, crucial in obtaining these estimates, is the absolute monotonicity of the structural function of the system in integral form.

Brulois, F. P.↗

NASA NTRS1983

Testing solar models with global solar oscillations in the 5-minute band

Frequencies of solar oscillation for normal modes described by spherical harmonics with l-values between 0 and 4 are computed. The method of computation is discussed and some of the theoretical uncertainties are examined. It is shown that the standard solar model has eigenfrequencies which do not agree with the frequencies observed for the low l-modes to within the estimated accuracy of either the observed or theoretical frequencies. Four non-standard models are considered: (1) the interior Z abundance is lower than the surface abundance; (2) the interior Z abundance is higher than the surface abundance; (3) the interior Z abundance is altered by mixing; and (4) a large primordial magnetic field remains in the solar core. The effect of all these models on the solar neutrino flux is considered, with the result that the high-Z model is rejected. The conclusions of Bahcall and Ulrich (1971) that a primordial magnetic field increases the neutrino flux are disputed.

Ulrich, R. K.↗

NASA NTRS1994

Large Eddy simulation of turbulence: A subgrid scale model including shear, vorticity, rotation, and buoyancy

The Reynolds numbers that characterize geophysical and astrophysical turbulence (Re approximately equals 10(exp 8) for the planetary boundary layer and Re approximately equals 10(exp 14) for the Sun's interior) are too large to allow a direct numerical simulation (DNS) of the fundamental Navier-Stokes and temperature equations. In fact, the spatial number of grid points N approximately Re(exp 9/4) exceeds the computational capability of today's supercomputers. Alternative treatments are the ensemble-time average approach, and/or the volume average approach. Since the first method (Reynolds stress approach) is largely analytical, the resulting turbulence equations entail manageable computational requirements and can thus be linked to a stellar evolutionary code or, in the geophysical case, to general circulation models. In the volume average approach, one carries out a large eddy simulation (LES) which resolves numerically the largest scales, while the unresolved scales must be treated theoretically with a subgrid scale model (SGS). Contrary to the ensemble average approach, the LES+SGS approach has considerable computational requirements. Even if this prevents (for the time being) a LES+SGS model to be linked to stellar or geophysical codes, it is still of the greatest relevance as an 'experimental tool' to be used, inter alia, to improve the parameterizations needed in the ensemble average approach. Such a methodology has been successfully adopted in studies of the convective planetary boundary layer. Experienc e with the LES+SGS approach from different fields has shown that its reliability depends on the healthiness of the SGS model for numerical stability as well as for physical completeness. At present, the most widely used SGS model, the Smagorinsky model, accounts for the effect of the shear induced by the large resolved scales on the unresolved scales but does not account for the effects of buoyancy, anisotropy, rotation, and stable stratification. The latter phenomenon, which affects both geophysical and astrophysical turbulence (e.g., oceanic structure and convective overshooting in stars), has been singularly difficult to account for in turbulence modeling. For example, the widely used model of Deardorff has not been confirmed by recent LES results. As of today, there is no SGS model capable of incorporating buoyancy, rotation, shear, anistropy, and stable stratification (gravity waves). In this paper, we construct such a model which we call CM (complete model). We also present a hierarchy of simpler algebraic models (called AM) of varying complexity. Finally, we present a set of models which are simplified even further (called SM), the simplest of which is the Smagorinsky-Lilly model. The incorporation of these models into the presently available LES codes should begin with the SM, to be followed by the AM and finally by the CM.

Canuto, V. M.↗

NASA NTRS1996

Automated Telerobotic Inspection Of Surfaces

Method of automated telerobotic inspection of surfaces undergoing development. Apparatus implementing method includes video camera that scans over surfaces to be inspected, in manner of mine detector. Images of surfaces compared with reference images to detect flaws. Developed for inspecting external structures of Space Station Freedom for damage from micrometeorites and debris from prior artificial satellites. On Earth, applied to inspection for damage, missing parts, contamination, and/or corrosion on interior surfaces of pipes or exterior surfaces of bridges, towers, aircraft, and ships.

Balaram, J.↗

DOE OSTI2022

A finite-volume scheme for modeling compressible magnetohydrodynamic flows at low Mach numbers in stellar interiors

Fully compressible magnetohydrodynamic (MHD) simulations are a fundamental tool for investigating the role of dynamo amplification in the generation of magnetic fields in deep convective layers of stars. The flows that arise in such environments are characterized by low (sonic) Mach numbers ($\mathscr{M}$ son ≲ 10 –2 ). In these regimes, conventional MHD codes typically show excessive dissipation and tend to be inefficient as the Courant–Friedrichs–Lewy (CFL) constraint on the time step becomes too strict. In this work we present a new method for efficiently simulating MHD flows at low Mach numbers in a space-dependent gravitational potential while still retaining all effects of compressibility. The proposed scheme is implemented in the finite-volume SEVEN-LEAGUE HYDRO (SLH) code, and it makes use of a low-Mach version of the five-wave Harten–Lax–van Leer discontinuities (HLLD) solver to reduce numerical dissipation, an implicit–explicit time discretization technique based on Strang splitting to overcome the overly strict CFL constraint, and a well-balancing method that dramatically reduces the magnitude of spatial discretization errors in strongly stratified setups. The solenoidal constraint on the magnetic field is enforced by using a constrained transport method on a staggered grid. We carry out five verification tests, including the simulation of a small-scale dynamo in a star-like environment at $\mathscr{M}$ son ~ 10 –3 . We demonstrate that the proposed scheme can be used to accurately simulate compressible MHD flows in regimes of low Mach numbers and strongly stratified setups even with moderately coarse grids.

79 ASTRONOMY AND ASTROPHYSICS↗