Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impact study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Angular dependence of electron impact excitation cross sections of O2.

Study of the electron-impact excitation spectrum of O2 at 20 and 45 eV impact energies and at scattering angles ranging from 10 to 90 deg. The angular behavior of the differential scattering cross sections for excitation of the a super 1 delta sub g, b super 1 sigma sub g (+), B super 3 sigma sub u (-) states for the 9.97-eV ('longest' band) and the 10.29-eV ('second' band) transitions, for the broad feature at 6.1 eV energy-loss, and for elastic scattering is determined. The experimentally measured relative differential and integral cross sections for these processes are approximately normalized to the absolute scale. The intensities of the different transitions in optical and electron-impact spectra are compared, and the importance of spin-orbit coupling and exchange processes is discussed. It is found that the energy-loss feature at 6.1 eV in the electron-impact spectrum is mostly due to the excitation of the c super 1 sigma sub u (-) state, and not the A super 3 sigma sub u (+) state, as had been previously thought.

Trajmar, S.↗
NASA NTRS1990

Electron impact excitation of coronene

A preliminary study of the electron-impact excitation of thermally evaporated coronene at 550 C was carried out using electron-energy-loss spectroscopy. Measurements of the energy-loss spectra of coronene at high (100 eV) and low (5-20 eV) impact energies are presented. One of the high-energy spectra was converted to an apparent generalized oscillator strength spectrum and compared to the photoabsorption spectrum of coronene. Observations concerning vibrational excitation of coronene by electron impact are also presented and discussed.

Khakoo, M. A.↗
NASA NTRS1974

Lunar highland rock types: Their implications for impact induced fractionation

The first step in a petrologic study must be a classification based on observed textures and mineralogy. Lunar rocks, may be classified into three major groups: (1) coarse-grained igneous rocks, (2) fine-grained igneous rocks and (3) breccias. Group 1 is interpreted as primitive lunar crustal rocks that display various degrees of crushing and/or annealing. Group 2 is interpreted as volcanic rocks. Group 3 is interpreted as resulting from impacts on the lunar surface and is subdivided on the basis of matrix textures into fragmental breccias, crystalline breccias that have been annealed, and crystalline breccias with igneous matrices. A synthesis of the relevant data concerning lunar highlands polymict breccias from the fields of petrography, chemistry, photogeology, and impact studies compels the prediction that the breccias should have homogeneous matrices from rock to rock within regions of the highlands of limited size where impact mixing has been efficient and extensive.

Phinney, W. C.↗
NASA NTRS2019

A Satellite Assessment of the Urban Heat Island in Morocco

Urban ecosystems interact with surroundings via land cover changes and their subsequent impact on surface temperature. In emerging countries, large urban agglomerations often form around cities, and only few studies have evaluated their impact. This study carries out the first ever large-scale assessment of urban heat island (UHI) and reflects on its mitigation in Morocco.The analysis reveals a well-defined UHI in urban-areas built within vegetated lands and an urban heat sink (UHS) in urban-areas built within arid regions. Both UHI and UHS amplitudes are higher during day than nighttime, emphasizing vegetation physiological activity. We show a monotonic increase in UHI amplitude with urban-area size. However, unlike previous studies, our analysis shows that as urban-areas built in desert-like environments grow in size, the UHS gradually decreases to ultimately turn into an UHI. On average, cities built within vegetation are warmer than rural fringe by 1.51°C during daytime. This suggests that daytime urban heating may exacerbate the potential climate warming. Our results also suggest that adapted trees constitute a natural cooling mechanism and should be part of urban heating mitigation in Morocco.

Urban Heat Sink↗
NASA NTRS2011

TPSAS-NF1676L-12284-DND

A much desired capability for conceptual design of aircraft is the ability to rapidly and accurately evaluate new concepts to avoid adverse trade decisions that can hinder the development in the later stages of design. For the conceptual design of supersonic aircraft, it is important to evaluate the robustness of a new low-boom concept. Here, robustness means that the aircraft configuration has low-boom ground signatures at both under-track and off-track locations. An integration process for off-track boom analysis is developed to facilitate robust design of low-boom supersonic aircraft. The integrated off-track analysis can also be used to study sonic boom impact on flight corridors where flight conditions and ground elevation might have a significant effect on ground signatures. The key for off-track sonic boom analysis is accurate solutions for off-body pressure distribution along the lower region of a cylinder cut around the aircraft. To ensure the numerical accuracy of the off-body pressure distribution, a mesh study is performed to determine the mesh requirements for off-track analysis as well as comparisons between Cart3D and USM3D off-track sonic boom results for various low-boom concepts. The integrated and automated process makes it possible to study the environmental impact of future supersonic concepts in the early design phases and support the planning of future flight corridors to mitigate sonic boom effects.

Irian Ordaz↗
NASA NTRS2024

Idaho & Oregon Agriculture: Monitoring Vegetation Impacts of Livestock Management Practices Used to Reduce Predator Conflicts on Idaho and Oregon Grazing Allotments

The practice of night penning, which involves corralling livestock into a fenced, secure area overnight, aims to safeguard animals from predators. Although this method has proven successful in minimizing interactions between livestock and wildlife, the extent of its impact on vegetation communities is still being explored. This project examines the feasibility of using Net Primary Productivity (NPP) values from the Rangeland Analysis Platform (RAP) to quantify the impacts of night penning on rangeland vegetation communities. RAP provides spatially distributed values of vegetation composition, cover, and productivity, and is derived from imagery from Landsat 5, Landsat 7 & Landsat 8 at a 30m resolution for rangelands across the United States. Our DEVELOP team partnered with Alderspring Ranch, Krebs Livestock, and the U.S Department of Agriculture Animal & Plant Health Inspection Service (APHIS) to analyze the impacts of night penning on vegetation communities. We identified control sites that captured the topographic characteristics of night pen sites used by our partners. We then quantified and compared changes in annual NPP between night pen and control sites. Our analysis of RAP NPP data, using a control-treatment design did not find impacts of night penning on vegetation. However, this was a preliminary analysis, and does not conclusively quantify the impacts of night penning on rangeland vegetation. Our analysis indicated that RAP may be a feasible tool to study livestock management impacts on rangeland vegetation; however, future studies could further validate these findings through ground observations.

Rangeland Analysis Platform (RAP)↗
NASA NTRS2019

Reviewing Benefits and Costs of Hydropower Development Evidence From the Lower Mekong River Basin

In this paper, we examine the benefits and costs of hydropower development in the Mekong River Basin. We compare four major reports—the Mekong River Commission's (MRC's) Basin Development Plan Programme, Phase 2 (BDP2), the Strategic Environmental Assessment of Hydropower on the Mekong Mainstream (SEA), the Study on the Impacts of Mainstream Hydropower on the Mekong River (MDS), and the MRC's recent council study (CS)—in order to provide the basis for a comparative analysis of the major impact evaluation literature on mainstream dam construction in the Mekong River Basin for the period of 2010–2018. The primary objective of the review is to identify points of agreement, disagreement, inconsistency, and knowledge gaps. Both Mekong River Commission reports (BDP2 and CS) suggest extensive economic benefits for proposed hydropower development, whereas the SEA and MDS indicate that the net impact would be negative. The projected impacts of hydropower development on fisheries, sediment flows, and ecosystems vary widely both in economic and biophysical terms. However, all four reports point to decreased food security and loss of local livelihoods for millions of people as major concerns related to dam development. While considerable resources have been devoted to producing these important studies, the lack of standardization across reports, especially assumptions and methodologies for economic impacts, frustrates efforts at meaningful comparison of their findings and precludes the prospect of clear analytical outcomes or policy impacts.

Cumulative impact assessment↗
NASA NTRS2000

Ignition Resistance of Polymeric Materials to Particle Impact in High-Pressure Oxygen

Particle impact ignition has been the primary cause of numerous fires in oxygen systems. This ignition phenomenon is known to occur where particles are present in high-velocity gas, and where impact occurs on a flammable material. The particle impact ignition behavior of many metals has been widely studied, but the particle impact ignition behavior of polymeric materials is relatively unknown. Particle impact ignition in polymeric materials is a concern as these materials are commonly used in component seat and seal applications, where high-velocity particle impacts can occur. This study evaluates several polymeric materials and compares the minimum temperature required for ignition (threshold temperature) of these materials: Kel-F 81 (CTFE), Teflon (PTFE), PEEK, Vespel SP-21, and Nylon 6/6. The materials were configured as targets in the White Sands Test Facility high-velocity particle impact test system. Gaseous oxygen was flowed at 4000 psi and sonic velocity, and the targets were impacted with 2000-micron aluminum 2017 particles. This paper discusses the results of these tests and ranks the materials according to their threshold temperatures at these conditions.

Forsyth, Elliot T.↗
NASA NTRS1992

What's the bottom line payback for TQM?

The purpose of this article is to explore in detail TQM's impact on improving organization performance and how effective TQM strategies are designed and implemented. Both of these issues are addressed primarily by a discussion of a recent study of TQM efforts conducted by the U.S. General Accounting Office (GAO). The GAO study examines the impact of formal TQM improvement strategies on the performance of selected U.S. companies. The study grew out of a concern by a number of U.S. Congressmen that little is known about the impact of various quality-related efforts many companies have adopted to remain viable and profitable in an increasingly competitive world marketplace. Specifically, the study addresses: what has been the performance impact of adopting TQM improvement strategies, how has improved quality been achieved, and what lessons may be applicable to U.S. companies in general. A number of other studies are also used to expand upon the GAO data.

Usilaner, Brian↗
NASA NTRS2023

Using Satellite Data to Characterize Land Surface Processes in Morocco

This study endeavors to produce a comprehensive land cover map for Morocco, addressing the absence of such a detailed map in the country. Our research encompasses ecological and climatic aspects specific to Morocco, while the methods used can be adapted to various regions and countries, considering their unique climatic conditions and land cover types. A combination of MODIS and Landsat datasets was employed to create a 5 km resolution Land Use and Land Cover (LULC) map for the entire nation. The process involved the aggregation and advanced processing of these datasets using surface processes algorithms. The resulting LULC map is the first of its kind for Morocco, shedding light on land cover distribution nationwide. It shows that approximately 13.5% of the country is covered by forests, predominantly in the Atlas and Rif mountains, Rabat–Sale, and the southern regions. Grasslands occupy over 16% of the study area, mainly in the north-east and west. Urban areas, including major cities like Casablanca, Rabat, and Marrakech, span nearly 3400 km². Moreover, large areas of shrublands and bare lands are evident across the country, while agricultural lands account for almost 20% of the national territory, mainly in the interior plains and north-western Atlantic coast. This study forms a crucial basis for ecological and climatic research in Morocco and serves as a valuable reference for various disciplines such as agriculture, natural resource management, and climate modeling. The mapping of biophysical parameters for each land cover class is a key feature of our research, and these parameters will be instrumental in a subsequent study examining the impact of urban development on surface climate in Morocco. Overall, our study underscores the importance of understanding biophysical parameters in addressing environmental and societal challenges.

Mohammed Thaiki↗
NASA NTRS2024

Effective structural impact detection and localization using convolutional neural network and Bayesian information fusion with limited sensors

Due to their unpredictable nature, many impact events (e.g., overheight vehicles striking on bridges) go unnoticed or get reported many hours later. However, they can induce structural failures or hidden damage that accelerates the structure’s long-term degradation. Therefore, prompt impact detection and localization strategies are essential for early warning of impact events and rapid maintenance of structures. Most existing impact detection strategies are developed for aircraft composite panels utilizing high-rate synchronized measurement from densely deployed sensors. Limited efforts have been made for infrastructure or human habitats which generally require large-scale but low-rate measurement. In particular, due to harsh environments (e.g., deep space habitats under meteoroids), structural impact localization must be robust to limited sensors (e.g., sensor damage during impacts) and multi-source errors (e.g., measurement errors). In this study, an effective impact detection and localization strategy is proposed using a limited number of vibration measurements, especially in harsh environments (e.g. in deep space). Convolutional neural networks are trained for each sensor node and are fused using Bayesian theory to improve the accuracy of impact localization. Special considerations are paid to evaluate the effect of both measurement error and modeling error in the analysis. The proposed strategy is illustrated using 1D structure, and further validated in 3D geodesic dome structure numerically. The results demonstrate that it can detect and localize impact events accurately and robustly on structures.

Yuguang Fu↗
NASA NTRS2013

Demonstrating the Effect of Particle Impact Dampers on the Random Vibration Response and Fatigue Life of Printed Wiring Assemblies

In a recent experimental study, small Particle Impact Dampers (PID) were bonded directly to the surface of printed circuit board (PCB) or printed wiring assemblies (PWA), reducing the random vibration response and increasing the fatigue life. This study provides data verifying practicality of this approach. The measured peak strain and acceleration response of the fundamental out of plane bending mode was significantly attenuated by adding a PID device. Attenuation of this mode is most relevant to the fatigue life of a PWA because the local relative displacements between the board and the supported components, which ultimately cause fatigue failures of the electrical leads of the board-mounted components are dominated by this mode. Applying PID damping at the board-level of assembly provides mitigation with a very small mass impact, especially as compared to isolation at an avionics box or shelf level of assembly. When compared with other mitigation techniques at the PWA level (board thickness, stiffeners, constrained layer damping), a compact PID device has the additional advantage of not needing to be an integral part of the design. A PID can simply be bonded to heritage or commercial off the shelf (COTS) hardware to facilitate its use in environments beyond which it was originally qualified. Finite element analysis and test results show that the beneficial effect is not localized and that the attenuation is not due to the simple addition of mass. No significant, detrimental reduction in frequency was observed. Side-by-side life testing of damped and un-damped boards at two different thicknesses (0.070" and 0.090") has shown that the addition of a PID was much more significant to the fatigue life than increasing the thickness. High speed video, accelerometer, and strain measurements have been collected to correlate with analytical results.

Knight, Brent↗
NASA NTRS1992

Study of compression-loaded and impact-damaged structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semisandwich panels

The structural efficiency of compression-loaded trapezoidal-corrugation sandwich and semisandwich composite panels is studied to determine their weight savings potential. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them and semisandwich panels with a corrugation attached to a single skin are considered. An optimization code is used to find the minimum weight designs for critical compressive load levels ranging from 3000 to 24,000 lb/in. Graphite-thermoplastic panels based on the optimal minimum weight designs were fabricated and tested. A finite element analysis of several test specimens was also conducted. The results of the optimization study, the finite element analysis, and the experiments are presented. The results of testing impact damage panels are also discussed.

Jegley, Dawn C.↗
NASA NTRS1995

SIMS chemical and isotopic analysis of impact features from LDEF experiments AO187-1 and AO187-2

Previous secondary ion mass spectrometry (SIMS) studies of extended impact features from LDEF capture cell experiment AO187-2 showed that it is possible to distinguish natural and man-made particle impacts based on the chemical composition of projectile residues. The same measurement technique has now been applied to specially prepared gold target impacts from experiment AO187-1 in order to identify the origins of projectiles that left deposits too thin to be analyzed by conventional energy-dispersive x-ray (EDX) spectroscopy. The results indicate that SIMS may be the method of choice for the analysis of impact deposits on a variety of sample surfaces. SIMS was also used to determine the isotopic compositions of impact residues from several natural projectiles. Within the precision of the measurements all analyzed residues show isotopically normal compositions.

Stadermann, Frank J.↗
NASA NTRS2013

Impacts of Microphysical Scheme on Convective and Stratiform Characteristics in Two High Precipitation Squall Line Events

This study investigates the impact of snow, graupel, and hail processes on simulated squall lines over the Southern Great Plains in the United States. The Weather Research and Forecasting (WRF) model is used to simulate two squall line events in Oklahoma during May 2007, and the simulations are validated against radar and surface observations. Several microphysics schemes are tested in this study, including the WRF 5-Class Microphysics (WSM5), WRF 6-Class Microphysics (WSM6), Goddard Cumulus Ensemble (GCE) Three Ice (3-ice) with graupel, Goddard Two Ice (2-ice), and Goddard 3-ice hail schemes. Simulated surface precipitation is sensitive to the microphysics scheme when the graupel or hail categories are included. All of the 3-ice schemes overestimate the total precipitation with WSM6 having the largest bias. The 2-ice schemes, without a graupel/hail category, produce less total precipitation than the 3-ice schemes. By applying a radar-based convective/stratiform partitioning algorithm, we find that including graupel/hail processes increases the convective areal coverage, precipitation intensity, updraft, and downdraft intensities, and reduces the stratiform areal coverage and precipitation intensity. For vertical structures, simulations have higher reflectivity values distributed aloft than the observed values in both the convective and stratiform regions. Three-ice schemes produce more high reflectivity values in convective regions, while 2-ice schemes produce more high reflectivity values in stratiform regions. In addition, this study has demonstrated that the radar-based convective/stratiform partitioning algorithm can reasonably identify WRF-simulated precipitation, wind, and microphysical fields in both convective and stratiform regions.

snow↗
NASA NTRS2016

Multi-Sensor Cloud and Aerosol Retrieval Simulator and Remote Sensing from Model Parameters : Aerosols - Part 2

The Multi-sensor Cloud Retrieval Simulator (MCRS) produces a simulated radiance product from any high-resolution general circulation model with interactive aerosol as if a specific sensor such as the Moderate Resolution Imaging Spectroradiometer (MODIS) were viewing a combination of the atmospheric column and land ocean surface at a specific location. Previously the MCRS code only included contributions from atmosphere and clouds in its radiance calculations and did not incorporate properties of aerosols. In this paper we added a new aerosol properties module to the MCRS code that allows users to insert a mixture of up to 15 different aerosol species in any of 36 vertical layers. This new MCRS code is now known as MCARS (Multi-sensor Cloud and Aerosol Retrieval Simulator). Inclusion of an aerosol module into MCARS not only allows for extensive, tightly controlled testing of various aspects of satellite operational cloud and aerosol properties retrieval algorithms, but also provides a platform for comparing cloud and aerosol models against satellite measurements. This kind of two-way platform can improve the efficacy of model parameterizations of measured satellite radiances, allowing the assessment of model skill consistently with the retrieval algorithm. The MCARS code provides dynamic controls for appearance of cloud and aerosol layers. Thereby detailed quantitative studies of the impacts of various atmospheric components can be controlled. In this paper we illustrate the operation of MCARS by deriving simulated radiances from various data field output by the Goddard Earth Observing System version 5 (GEOS-5) model. The model aerosol fields are prepared for translation to simulated radiance using the same model sub grid variability parameterizations as are used for cloud and atmospheric properties profiles, namely the ICA technique. After MCARS computes modeled sensor radiances equivalent to their observed counterparts, these radiances are presented as input to operational remote-sensing algorithms. Specifically, the MCARS-computed radiances are input into the processing chain used to produce the MODIS Data Collection 6 aerosol product (MOYD04). TheMOYD04 product is of course normally produced from MOYD021KM MODIS Level-1B radiance product directly acquired by the MODIS instrument. MCARS matches the format and metadata of a MOYD021KM product. The resulting MCARS output can be directly provided to MODAPS (MODIS Adaptive Processing System) as input to various operational atmospheric retrieval algorithms. Thus the operational algorithms can be tested directly without needing to make any software changes to accommodate an alternative input source. We show direct application of this synthetic product in analysis of the performance of the MOD04 operational algorithm. We use biomass-burning case studies over Amazonia employed in a recent Working Group on Numerical Experimentation (WGNE)-sponsored study of aerosol impacts on numerical weather prediction (Freitas et al., 2015). We demonstrate that a known low bias in retrieved MODIS aerosol optical depth appears to be due to a disconnect between actual column relative humidity and the value assumed by the MODIS aerosol product.

aerosol retrieval↗
NASA NTRS2015

Impact-Induced Clay Mineral Formation and Distribution on Mars

Clay minerals have been identified in the central peaks and ejecta blankets of impact craters on Mars. Several studies have suggested these clay minerals formed as a result of impact induced hydrothermalism either during Mars' Noachian era or more recently by the melting of subsurface ice. Examples of post-impact clay formation is found in several locations on Earth such as the Mjolnir and Woodleigh Impact Structures. Additionally, a recent study has suggested the clay minerals observed on Ceres are the result of impact-induced hydrothermal processes. Such processes may have occurred on Mars, possibly during the Noachian. Distinguishing between clay minerals formed preor post-impact can be accomplished by studying their IR spectra. In fact, showed that the IR spectra of clay minerals is greatly affected at longer wavelengths (i.e. mid-IR, 5-25 micron) by impact-induced shock deformation while the near-IR spectra (1.0-2.5 micron) remains relatively unchanged. This explains the discrepancy between NIR and MIR observations of clay minerals in martian impact craters noted. Thus, it allows us to determine whether a clay mineral formed from impact-induced hydrothermalism or were pre-existing and were altered by the impact. Here we study the role of impacts on the formation and distribution of clay minerals on Mars via a fully 3-D Monte Carlo cratering model, including impact- melt production using results from modern hydrocode simulations. We identify regions that are conducive to clay formation and the location of clay minerals post-bombardment.

Rivera-Valentin, E. G.↗