Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Unmixing AVIRIS data to provide a method for vegetation fraction subtraction

Five flight lines of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were acquired over the Dolly Varden Mountains in northeastern Nevada on 2 June 1989. Signal-to-noise ratio values are given. The empirical line method was used to convert AVIRIS radiance values to reflectance. This method involves calculating gain and offset values for each band. These values are based upon a comparison of the imaging spectrometer data and field reflectance measurements, both taken over the same ground targets. The targets used were a dark andesite flow and a bright playa.

Zamudio, J. A.↗

Auto-metasomatism of the western lunar highlands: Result of closed system fractionation and mobilization of a KREEPy trapped liquid

The discovery of REE-rich phosphates (dominantly whitlockite) in pristine, non-mare rocks of the western lunar nearside (Apollo 14, Apollo 12, and most recently, Apollo 17) has created a paradox for lunar petrologists. These phases are found in feldspar-rich cumulates of both the Mg-suite and the Alkali suite, which differ significantly in their mineral chemistries and major element compositions. Despite the differences in host rock compositions, whitlockites in both suites have similar compositions, with LREE concentrations around 21,000 to 37,000 x chondrite. Simple modeling of possible parent magma compositions using the experimental whitlockite/liquid partition coefficients of Dickinson and Hess show that these REE concentrations are too high to form from normal lunar magmas, even those characterized as 'urKREEP.'

Shervais, John W.↗

The nature of agglutinitic glass in the fine-size fraction of lunar soil 10084

Agglutinitic glass contains much of the reduced Fe in lunar soils, and it contributes to the modification of reflectance spectra from lunar soils. Previous work has shown that agglutinitic glass can be compositionally heterogeneous, but the scale of these heterogeneities is not well known. In addition, few data are available on the characteristics of the inclusions in agglutinitic glass. Here we report on our preliminary transmission electron microscope (TEM) examination of agglutinitic glass fragments from the Apollo 11 soil 10084.

Keller, Lindsay P.↗

NiAl-base composite containing high volume fraction of AlN for advanced engines

A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

Hebsur, Mohan↗

Density and mixture fraction measurements in a GO2/GH2 uni-element rocket chamber

In recent years, there has been a renewed interest in gas/gas injectors for rocket combustion. Specifically, the proposed new concept of full-flow oxygen rich preburner systems calls for the injection of both oxygen and hydrogen into the main chamber as gaseous propellants. The technology base for gas/gas injection must mature before actual booster class systems can be designed and fabricated. Since the data base for gas/gas injection is limited to studies focusing on the global parameters of small reaction engines, there is a critical need for experiment programs that emphasize studying the mixing and combustion characteristics of GO2 and GH2 propellants from a uni-element injector point of view. The experimental study of the combusting GO2/GH2 propellant combination in a uni-element rocket chamber also provides a simplified environment, in terms of both geometry and chemistry, that can be used to verify and validate computational fluid dynamic (CFD) models.

Moser, M. D.↗

A combined Eulerian-volume of fraction-Lagrangian method for atomization simulation

The tracking of free surfaces between liquid and gas phases and analysis of the interfacial phenomena between the two during the atomization and breakup process of a liquid fuel jet is modeled. Numerical modeling of liquid-jet atomization requires the resolution of different conservation equations. Detailed formulation and validation are presented for the confined dam broken problem, the water surface problem, the single droplet problem, a jet breakup problem, and the liquid column instability problem.

Seung, S. P.↗

Laser Doppler Velocimetry and full-field soot volume fraction

Since its introduction in the mid-sixties, Laser Doppler Velocimetry (LDV) has become one of the most widely used methods for the measurement of flows. Its remote and essentially non-intrusive nature provides an invaluable tool for a variety of difficult measurement situations which would be otherwise inaccessible. The high spatial resolution and rapid temporal response afforded by this technique are well suited to the determination of spatial and temporal details of flow fields, as well as characterization of turbulence. Advances in the understanding of the properties of LDV signals, accompanied by technological advances in coherent laser sources, detectors of high sensitivity and low noise, optical fabrication techniques and high-speed digital signal processing architectures have resulted in systems of increased accuracy and flexibility. As will be shown, recent progress in solid-state lasers and photo-detectors has been beneficial insofar as the compatibility of this method with the unique and severe constraints inherent in microgravity combustion science experiments.

Greenberg, Paul S.↗

Fractional Whirl Motion in Wave Journal Bearings

Unloaded gas, plain journal bearings experience sub-synchronous whirl motion due to fluid film instabilities and wall contact usually occurs immediately after the onset of the whirl motion. An alternative is the wave journal bearing which significantly improves bearing stability. The predicted threshold where the sub-synchronous whirl motion starts was well confirmed by the experimental observation. In addition, both a two-wave and a three-wave journal bearing can operate free of sub-synchronous whirl motion over a large range in speeds. When the sub-synchronous whirl motion occurs, both the two-wave and three-wave bearing can run in a whirl orbit well within the bearing clearance. At large clearances and wave amplitudes a two-wave bearing, unliKe other bearings, can exhibit a sub-synchronous whirl movement at both low and high speeds, but can run extremely stable and without whirl at intermediate speeds. Moreover, in these cases, the whirl frequencies are close to a quarter of the synchronous speed. The three-wave bearing can exhibit sub-synchronous whirl motion only after a specific threshold when the speed increases and the whirl frequencies are close to half of the synchronous speed.

Dimofte, Florin↗

NiAl-Base Composite Containing High Volume Fraction of AIN Particulate for Advanced Engines

Cryomilling of prealloyed NiAl containing 53 at. % AJ was carried out to achieve high nitrogen levels. The consolidation of cryomilled powder by extrusion or hot pressing/ hot isostatic pressing resulted in a fully dense NiAl-base composite containing 30 vol. % of inhomogeneously distributed, nanosized AIN particulate. The NiAl-30AIN composite exhibited the highest compression yield strengths at all temperatures between 300 and 1300 K as compared with other compositions of NiAl-AIN composite. The NiAl-30AIN specimens tested under compressive creep loading between 1300 and 1500 K also exhibited the highest creep resistance with very little surface oxidation indicating also their superior elevated temperature oxidation resistance. In the high stress exponent regime, the strength is proportional to the square root of the AIN content and in the low stress exponent regime, the influence of AIN content on strength appears to be less dramatic. The specific creep strength of this material at 1300 K is superior to a first generation Ni-base single crystal superalloy. The improvements in elevated temperature creep strength and oxidation resistance have been achieved without sacrificing the room temperature fracture toughness of the NiAl-base material. Based on its attractive combination of properties, the NiAl-30AIN composite is a potential candidate for advanced engine applications,

Hebsur, Mohan G.↗

Massive Chromite in the Brenham Pallasite and the Fractionation of Cr During the Crystallization of Asteroidal Cores

Large (greater than or equal to 2 mm) chromite grains are present in IIIAB iron meteorites and in the main-group a pallasites (PMG), closely related to high-Au IIIAB irons, Pallasites seem to have formed by the intrusion of a highly evolved metallic magma from a IIIAB-like core into fragmented olivine of the overlying dunite mantle. High Cr contents are commonly encountered during the analyses of metallic samples of high-Au IIIAB irons and main-group pallasites, an indication that Cr contents were high in the intruding liquid and that Cr behaved as an incompatible element during the crystallization of the IIIAB magma, contrary to expectations based on the negative IIIAB Cr-Ni and Cr-Au trends among low-Au IIIAB irons. In a region about 10 cm across in the Brenham main-group pallasite massive chromite fills the interstices between olivine grains, the site normally occupied by metal in Brenham and other pallasites. The massive chromite may have formed as a late cumulus phase; because Fe-Ni was also crystallizing, its absence in the chromite-rich region suggests a separation associated with differences in liquid buoyancy. The coexisting chromite and olivine are zoned; in the olivine FeO is highest in pallasitic (olivine-metal) regions, lowest in rims adjacent to chromite, and intermediate in the cores of these olivines. Chromite shows the opposite zoning, with the highest FeO contents at grain edges adjacent to olivine. The observed gradients are those expected to form by Fe-Mg exchange between olivine and chromite during slow cooling at subsolidus temperatures. Compared to normal Brenham, contents of phosphoran olivine and phosphates are higher in the chromitic pallasitic region. We also report data for large-to-massive chromites present in PMG Molong and in high-Au IIIAB Bear Creek that, like Brenham, formed from a highly evolved magma. The Bear Creek chromite has a much lower Mg content than that in the pallasites, implying that, in the PMG, the Mg was extracted from the olivine during high-temperature reaction with the precipitating chromite. There are other circumstantial arguments indicating that Cr was incompatible in the metal during the crystallization of the IIIAB magma, with the concentration in die residual magma rising from an initial value of about 300 micrograms/g to a value around 700 micrograms/g when Bear Creek and Brenham were formed. We consider possible explanations for these negative Cr-Au and Cr-Ni trends and find the most probable one to be that they reflect sampling artefacts resulting from analysts avoiding visible chromite (and the commonly associated phase FeS) when choosing metal samples.

Wasson, John T.↗

Deuterium Fractionation in Analogs of Interstellar Ices: Laboratory Measurements

A question of key interest in the field of Astrobiology is the extent to which organic compounds made in space may play a role in the origin of life in planetary systems. In general, the best proof that at least some interstellar materials survive incorporation into forming stellar/planetary systems is their identification in extraterrestrial samples through detection of the isotopic anomalies they may carry. In the case of organic compounds, the chief isotopic anomalies that might be expected are the enrichment of D and 15N. and such enrichments are seen in primitive extraterrestrial materials, for example, in the organics in carbonaceous chondrites and interplanetary dust particles. In my talk I will review the various astrochemical processes by which deuterium can become enriched in organic compounds and will discuss some recent laboratory experiments that examine one of these processes in particular. name]y the UV photolysis of interstellar ices. Finally, I will review the current state of our knowledge of D enrichments in primitive solar system materials and discuss the constraints these data place on the relative importance of the various possible interstellar D enrichment processes.

Sandford, Scott A.↗

Fractional Factorial Experiment Designs to Minimize Configuration Changes in Wind Tunnel Testing

This paper serves as a tutorial to introduce the wind tunnel research community to configuration experiment designs that can satisfy resource constraints in a configuration study involving several variables, without arbitrarily eliminating any of them from the experiment initially. The special case of a configuration study featuring variables at two levels is examined in detail. This is the type of study in which each configuration variable has two natural states - 'on or off', 'deployed or not deployed', 'low or high', and so forth. The basic principles are illustrated by results obtained in configuration studies conducted in the Langley National Transonic Facility and in the ViGYAN Low Speed Tunnel in Hampton, Virginia. The crucial role of interactions among configuration variables is highlighted with an illustration of difficulties that can be encountered when they are not properly taken into account.

DeLoach, Richard↗