Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Space Shuttle longitudinal landing flying qualities

The Space Shuttle program took on the challenge of providing a manual landing capability for an operational vehicle returning from orbit. Some complex challenges were encountered in developing the longitudinal flying qualities required to land the Orbiter manually in an operational environment. Approach and landing test flights indicated a tendency of pilot-induced oscillation near landing. Changes in the operational procedures reduced the difficulty of the landing task, and an adaptive stick filter was incorporated to reduce the severity of any pilot-induced oscillatory motions. Fixed-base, moving-base, and in-flight simulations were used for the evaluations. Overall, the Orbiter control system and operational procedures produced a good capability to perform routinely precise landings with a large, unpowered vehicle that has a low lift-to-drag ratio.

Powers, B. G.↗
NASA NTRS1986

Propulsion recommendations for Space Station free flying platforms

Propulsion system candidates have been defined for Space Station free flying platforms for the purpose of comparison and to understand the impact of the various mission requirements on the candidate designs. Consideration of the platform mission requirements and comparisons of the conceptual propulsion system design candidates has led to a fairly clear set of recommendations for propulsion for each of the various platforms.

Redd, L. R.↗
NASA NTRS1987

Conceptual Final Paper on the Preliminary Design of an Oblique Flying Wing SST

A conceptual Oblique Flying Wing Supersonic Transport Aircraft (OFW, or surfplane because of its shape) was first proposed in 1957. It was reintroduced in 1987 in view of the emerging technology of artificial stabilization. This paper is based on the performance and economics study of an M2 B747-100B replacement aircraft. In order to make a fair comparison of this configuration with the B747, an end-sixties structural technology level is assumed. It is shown that a modern stability and control system can balance the aircraft and smooth out gusts, and that the OFW configuration equals or outperforms the B747 in speed, economy and comfort.

Van der Velden, Alexander J. M.↗
NASA NTRS1986

Flying complex approach paths using the microwave landing system

A piloted simulation study was conducted to examine the requirements for using electromechanical flight instrumentation to provide guidance for manually controlled flight along complex, curved approach paths within the microwave landing system signal coverage. The data from these tests indicated that flight director guidance is required for the manually controlled flight of a jet transport airplane on complex, curved approach paths. Each of the three guidance algorithms tested could be used to fly the paths. However, pilot comments indicated that the use of guidance based on capturing the next straight path segment may not be acceptable since full-scale lateral deflections normally resulted during turns. Pilot comments indicated that all the approach paths tested could be used in normal airline operations. Approach paths with both multiple, sequential turns and short final path segments were demonstrated.

Knox, Charles E.↗
NASA NTRS1987

An orbiting control station for free-flying teleoperators - Preliminary design methodology

This paper summarizes work being done to develop the preliminary design of a control station for the free-flying teleoperator/telerobot ROBIN. The four-step development process involves telerobot capability definition, mission analysis, requirements generation, and design solution. The ROBIN servomanipulator requirements are listed, and a telerobotic control station requirement tree is shown.

Clarke, M. M.↗
NASA NTRS1988

Tracking and stationkeeping for free-flying robots using sliding surfaces

The authors use the concept of sliding surfaces for generating two types of tracking control laws for a free-flying robot engaged in zero-gravity assembly tasks. Suction control, developed elsewhere for controlling manipulators with stationary bases, is used here to track workspace trajectories for manipulators mounted on mobile platforms. Zone control is formulated for the purpose of stationkeeping a robot maneuvering unit during payload manipulation. Experimental results are described for tests performed on an air-bearing robot tracking payload trajectories along a glass surface.

Carignan, Craig R.↗
NASA NTRS1988

Simulation evaluation of transition and hover flying qualities of the E-7A STOVL aircraft

The generalized simulation model developed for the E-7A STOVL fighter-type aircraft configuration has attempted to define the limits of acceptibility for a vertical-to-horizontal-to-vertical flight transition envelope. An effort was also made to determine the control power required during hover and transition, and to evaluate whether the integration of flight and propulsion controls thus far effected achieves good flying qualities throughout the low-speed flight envelope. The results thus obtained furnish a general view of the acceptable transition corridor, expressed in terms of the minimum-climb capability.

Franklin, James A.↗
NASA NTRS1988

Measurement of sound emitted by flying projectiles with aeroacoustic sources

Training projectiles with axisymmetric ring cavities that produce intense tones in an airstream were shot in a straight-line trajectory. A ground-based microphone was used to obtain the angular distribution of sound intensity produced from the flying projectile. Data reduction required calculation of Doppler and attenuation factors. Also, the directional sensitivity of the ground-mounted microphone was measured and used in the data reduction. A rapid angular variation of sound intensity produced from the projectile was found that can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of short-range flight tests that yield acoustic data free of uncertainties associated with diffraction, reflection, and refraction at jet boundaries in free-jet tests.

Cho, Y. I.↗
NASA NTRS1990

Rotating-unbalanced-mass Devices for Scanning Balloon-borne Experiments, Free-flying Spacecraft, and Space Shuttle/space Station Experiments

A new method is presented for scanning balloon-borne experiments, free-flying spacecraft, and gimballed experiments mounted to the space shuttle or the space station. It uses rotating-unbalanced-mass (RUM) devices for generating circular, line, or raster scan patterns and an auxiliary control system for target acquisition, keeping the scan centered on the target, and producing complementary motion for raster scanning. It is ideal for applications where the only possible way to accomplish the required scan is to physically scan the entire experiment or spacecraft as in x ray and gamma ray experiments. In such cases, this new method should have advantages over prior methods in terms of either power, weight, cost, performance, stability, or a combination of these.

Polites, Michael E.↗
NASA NTRS1990

Technology for an intelligent, free-flying robot for crew and equipment retrieval in space

Crew rescue and equipment retrieval is a Space Station Freedom requirement. During Freedom's lifetime, there is a high probability that a number of objects will accidently become separated. Members of the crew, replacement units, and key tools are examples. Retrieval of these objects within a short time is essential. Systems engineering studies were conducted to identify system requirements and candidate approaches. One such approach, based on a voice-supervised, intelligent, free-flying robot was selected for further analysis. A ground-based technology demonstration, now in its second phase, was designed to provide an integrated robotic hardware and software testbed supporting design of a space-borne system. The ground system, known as the EVA Retriever, is examining the problem of autonomously planning and executing a target rendezvous, grapple, and return to base while avoiding stationary and moving obstacles. The current prototype is an anthropomorphic manipulator unit with dexterous arms and hands attached to a robot body and latched in a manned maneuvering unit. A precision air-bearing floor is used to simulate space. Sensor data include two vision systems and force/proximity/tactile sensors on the hands and arms. Planning for a shuttle file experiment is underway. A set of scenarios and strawman requirements were defined to support conceptual development. Initial design activities are expected to begin in late 1989 with the flight occurring in 1994. The flight hardware and software will be based on lessons learned from both the ground prototype and computer simulations.

Erickson, J. D.↗
NASA NTRS1989

Capture of free-flying payloads with flexible space manipulators

A recently developed control system for capturing free-flying payloads with flexible manipulators is discussed. Three essential points in this control system are, calculating optimal path, using a vision sensor for an external sensor, and controlling active vibration. Experimental results are shown using a planar flexible manipulator.

Komatsu, T.↗
NASA NTRS1989

Experimental study on two-dimensional free-flying robot satellite model

The experimental study on a control method for a free flying space robotic arm was treated by means of a two-dimensional laboratory model. The main target is to develop a new control method for trajectory tracking or target capturing, considering dynamical interaction between the manipulator arm and the base vehicle in space micro-gravity environment. In order to simulate the micro-gravity environment mechanically, a laboratory model of a robot satellite supported on air bearings was developed. The model comprises a base equipped with power and air supplies and a two-link manipulator arm. This model has relatively low gravitational and frictional disturbance in planar motion. An on-line resolved motion rate control scheme with vision feedback is developed for experimenting capture operations. The scheme utilizes the Generalized Jacobian Matrix. In experiment, the acceleration environment of the model is evaluated firstly, then target capture operations are examined. The manipulator can properly chase and capture both a standing target and a moving target in spite of complex satellite/manipulator dynamical interactions. The experimental results confirm the validity of the Generalized Jacobian Matrix concept and the proposed control method.

Umetani, Yoji↗
NASA NTRS1989

Computed torque control of a free-flying cooperat ing-arm robot

The unified approach to solving free-floating space robot manipulator end-point control problems is presented using a control formulation based on an extension of computed torque. Once the desired end-point accelerations have been specified, the kinematic equations are used with momentum conservation equations to solve for the joint accelerations in any of the robot's possible configurations: fixed base or free-flying with open/closed chain grasp. The joint accelerations can then be used to calculate the arm control torques and internal forces using a recursive order N algorithm. Initial experimental verification of these techniques has been performed using a laboratory model of a two-armed space robot. This fully autonomous spacecraft system experiences the drag-free, zero G characteristics of space in two dimensions through the use of an air cushion support system. Results of these initial experiments are included which validate the correctness of the proposed methodology. The further problem of control in the large where not only the manipulator tip positions but the entire system consisting of base and arms must be controlled is also presented. The availability of a physical testbed has brought a keener insight into the subtleties of the problem at hand.

Koningstein, Ross↗
NASA NTRS1989

An intelligent, free-flying robot

The ground based demonstration of the extensive extravehicular activity (EVA) Retriever, a voice-supervised, intelligent, free flying robot, is designed to evaluate the capability to retrieve objects (astronauts, equipment, and tools) which have accidentally separated from the Space Station. The major objective of the EVA Retriever Project is to design, develop, and evaluate an integrated robotic hardware and on-board software system which autonomously: (1) performs system activation and check-out; (2) searches for and acquires the target; (3) plans and executes a rendezvous while continuously tracking the target; (4) avoids stationary and moving obstacles; (5) reaches for and grapples the target; (6) returns to transfer the object; and (7) returns to base.

Reuter, G. J.↗
NASA NTRS1988

An intelligent, free-flying robot

The ground-based demonstration of EVA Retriever, a voice-supervised, intelligent, free-flying robot, is designed to evaluate the capability to retrieve objects (astronauts, equipment, and tools) which have accidentally separated from the Space Station. The major objective of the EVA Retriever Project is to design, develop, and evaluate an integrated robotic hardware and on-board software system which autonomously: (1) performs system activation and check-out, (2) searches for and acquires the target, (3) plans and executes a rendezvous while continuously tracking the target, (4) avoids stationary and moving obstacles, (5) reaches for and grapples the target, (6) returns to transfer the object, and (7) returns to base.

Reuter, G. J.↗
NASA NTRS1990

The sonic boom of an oblique flying wing

An analysis of sonic boom characteristics of an oblique flying wing is presented. The wing, represented by a slewed lift and area-distribution as well as a panel geometry, promises a reduction of sonic boom signature. For every azimuth angle these distributions are represented by an equivalent body. The near-field pressure signature is determined by using the Whitham F-function with a correction to account for nonlinear wave propagation. The geometric asymmetry leads to an asymmetrical sonic boom beneath the flight track with bow shocks between 1.0 and 1.5 PSF. Due to favorable volume-lift interference the aft shock has only half the amplitude of the bow shock. A fast numerical method is described to calculate the perceived loudness.

Kroo, Ilan↗
NASA NTRS1989

Experiments in global navigation and control of a free-flying space robot

This paper reviews initial work at the Stanford University Aerospace Robotics Laboratory (ARL) in developing and controlling a free-flying space robot. The objective of this project is to develop a laboratory version of a space robot that is capable of performing target tracking, acquisition, and manipulation. In particular, this paper focuses on the problems associated with capturing a free-floating object that is initially out of reach of the robot. A set of rules is presented for generating an appropriate intercept trajectory. A controller architecture suitable for carrying out these motions is also described. Finally the results of computer simulations illustrating the behavior of these algorithms are shown along with a description of the physical hardware on which they will be tested.

Ullman, M.↗
NASA NTRS1992

Mechanical Backup For Fly-By-Wire Control System

Mechanical device eliminates need for redundant fly-by-wire subsystems. Main components are two linkages. One connected to control column in conventional, reversible control system. Other slides inside first linkage and connected to pilot's control wheel. In addition to aircraft applications, design used in control systems in which computer control desirable but safety backup systems required; for example, in boat rudders, engine controls in boats and automobiles, and controls in construction equipment.

Stewart, Eric C.↗