Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “floating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Provably Correct Floating-Point Implementation of a Point-In-Polygon Algorithm

The problem of determining whether or not a point lies inside a given polygon occurs in many applications. In air traffic management concepts, a correct solution to the point-in-polygon problem is critical to geofencing systems for Unmanned Aerial Vehicles and in weather avoidance applications. Many mathematical methods can be used to solve the point-in-polygon problem. Unfortunately, a straightforward floating- point implementation of these methods can lead to incorrect results due to round-off errors. In particular, these errors may cause the control flow of the program to diverge with respect to the ideal real-number algorithm. This divergence potentially results in an incorrect point-in- polygon determination even when the point is far from the edges of the polygon. This paper presents a provably correct implementation of a point-in-polygon method that is based on the computation of the winding number. This implementation is mechanically generated from a source- to-source transformation of the ideal real-number specification of the algorithm. The correctness of this implementation is formally verified within the Frama-C analyzer, where the proof obligations are discharged using the Prototype Verification System (PVS).

Moscato, Mariano M.↗
NASA NTRSDate not supplied

Recent Advances in Discrete Crack Modeling Applied to Laminated Composites with Emphasis on: Floating Node Method, VCCT and Cohesive Zone Modeling

The present talk will provide an overview of the work performed during the Advanced Composites Project (ACP) on the development, and verification and validation of the Floating Node Method (FNM) as well as the Virtual Crack Closure Technique (VCCT) and cohesive zone modeling (CZM). The FNM is a finite element-based technique to represent crack networks. The complex nature of matrix crack-delamination interactions observed in unidirectional (UD) tape laminates suggests that a methodology such as the FNM method may be required to be able to accurately simulate damage progression in these laminates. Simulating crack onset and growth within the context of the FNM relies on techniques such as VCCT and CZM. The talk is organized to provide, via select examples, an overview of the breadth of the Verification & Validation (V&V) exercises performed during the ACP, and how these challenged the state-of-the art and guided further developments in discrete crack modeling, while helping to establish confidence in the progress made and map the challenges ahead. The performance of the VCCT and CZM individually, and in combination with the FNM can be assessed through verification exercises. These exercises typically consist of a comparison of simulation results to known numerical or analytical solutions. Verification is key to identify implementation issues and limitations that, otherwise, may remain undetected and cloud any subsequent validation efforts. Indeed, a subset of these numerical exercises led to further developments of the VCCT and the FNM method as will be illustrated. Before embarking on the subsequent validation of the framework, it is critical to have adequate characterization data. However, the testing campaign conducted revealed material responses that challenged the state-of-the-art and required further developments. The developments in CZM technology associated with the modeling of the responses of hybrid interfaces (fabric/UD) will be given as an example. Finally, the talk will conclude with a summary of the validation exercises performed under quasi-static and fatigue loadings, highlighting some of the key achievements, outstanding challenges and lessons learned.

finite elements↗
NASA NTRS2023

Spacecraft Floating Potential Measurements for the Wind Spacecraft

Analysis of 8,804,545 electron velocity distribution functions, observed by the Wind spacecraft near 1 au between 2005 January 1 and 2022 January 1, was performed to determine the spacecraft floating potential, ∅ sc . Wind was designed to be electrostatically clean, which helps keep the magnitude of ∅ sc small (i.e., ∼5–9 eV for nearly all intervals) and the potential distribution more uniform. We observed spectral enhancements of ∅ sc at frequencies corresponding to the inverse synodic Carrington rotation period with at least three harmonics. The two-dimensional histogram of ∅ sc versus time also shows at least two strong peaks, with a potential third, much weaker peak. These peaks vary in time, with the intensity correlated with solar maximum. Thus, the spectral peaks and histogram peaks are likely due to macroscopic phenomena like coronal mass ejections (solar cycle dependence) and stream interaction regions (Carrington rotation dependence). The values of ∅ sc are summarized herein and the resulting data set is discussed.

Lynn B Wilson III↗
NASA NTRSDate not supplied

A Minimal Low-Earth Orbit Mission to Obtain Acceleration Parallax Measurements for Low-Mass Free-Floating Planets

We propose a minimal mission to LEO to obtain the masses of low-mass free-floating planets (FFP) using acceleration parallax measurements. Theoretically these low-mass FFP are unlikely to have formed in situ by processes that produce high-mass FFP and stars but rather have been ejected from exoplanetary systems as they become dynamically relaxed during formation. A large statistical sample of such FFP will have significant leverage on planet formation theory

Richard K Barry↗
DOE OSTI2013

Offshore Code Comparison Collaboration, Continuation: Phase II Results of a Floating Semisubmersible Wind System: Preprint

Offshore wind turbines are designed and analyzed using comprehensive simulation tools that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structure. The Offshore Code Comparison Collaboration (OC3), which operated under the International Energy Agency (IEA) Wind Task 23, was established to verify the accuracy of these simulation tools [1]. This work was then extended under the Offshore Code Comparison Collaboration, Continuation (OC4) project under IEA Wind Task 30 [2]. Both of these projects sought to verify the accuracy of offshore wind turbine dynamics simulation tools (or codes) through code-to-code comparison of simulated responses of various offshore structures. This paper describes the latest findings from Phase II of the OC4 project, which involved the analysis of a 5-MW turbine supported by a floating semisubmersible. Twenty-two different organizations from 11 different countries submitted results using 24 different simulation tools. The variety of organizations contributing to the project brought together expertise from both the offshore structure and wind energy communities. Twenty-one different load cases were examined, encompassing varying levels of model complexity and a variety of metocean conditions. Differences in the results demonstrate the importance and accuracy of the various modeling approaches used. Significant findings include the importance of mooring dynamics to the mooring loads, the role nonlinear hydrodynamic terms play in calculating drift forces for the platform motions, and the difference between global (at the platform level) and local (at the member level) modeling of viscous drag. The results from this project will help guide development and improvement efforts for these tools to ensure that they are providing the accurate information needed to support the design and analysis needs of the offshore wind community.

17 WIND ENERGY↗
DOE OSTI2015

Split ring floating air riding seal for a turbine

A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, and a central passage connecting the annular cavity to the annular piston chamber to supply compressed air to the seal face, where the annular piston assembly is a split piston assembly to maintain a tight seal as coning of the rotor disk occurs.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2015

Floating Offshore WTG Integrated Load Analysis & Optimization Employing a Tuned Mass Damper

Floating offshore wind turbines (FOWTs) present complex design challenges due to the coupled dynamics of the platform motion, mooring system, and turbine control systems, in response to wind and wave loading. This can lead to higher extreme and fatigue loads than a comparable fixed bottom or onshore system. Previous research[1] has shown the potential to reduced extreme and fatigue loads on FOWT using tuned mass dampers (TMD) for structural control. This project aims to reduce maximum loads using passive TMDs located at the tower top during extreme storm events, when grid supplied power for other controls systems may not be available. The Alstom Haliade 6MW wind turbine is modelled on the Glosten Pelastar tension-leg platform (TLP). The primary objectives of this project are to provide a preliminary assessment of the load reduction potential of passive TMDs on real wind turbine and TLP designs.

17 WIND ENERGY↗
DOE OSTI2016

Floating air riding seal for a turbine

A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2017

What Makes Pumice Float?

This 3-D rendering, produced using X-ray microtomography at Berkeley Lab’s Advanced Light Source, shows a cube-shaped sample of pumice (blue-gray) and pockets of trapped gases (other colors). The X-ray studies helped scientists uncover how gas becomes trapped by surrounding liquid, causing pumice to float on the ocean's surface for prolonged periods. Credit: Berkeley Lab, UC Berkeley

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Scalable Yet Rigorous Floating-Point Error Analysis

Automated techniques for rigorous floating-point round-off error analysis are a prerequisite to placing important activities in HPC such as precision allocation, verification and code optimization on a formal footing. Yet existing techniques cannot provide tight bounds for expressions beyond a few dozen operators; barely enough for HPC. In this work, we offer an approach embedded in a new tool called SATIRE that scales error analysis by four orders of magnitude compared to today’s best-of-class tools. We explain how three key ideas underlying SATIRE help it attain such scale: path strength reduction, bound optimization and abstraction. SATIRE provides tight bounds and rigorous guarantees on significantly larger expressions with well over a hundred thousand operators, covering important examples including FFT, matrix multiplication and PDE stencils.

Das, Arnab↗
DOE OSTI2021

Open-Loop Control of Adjustable Tuned Mass Dampers for Floating Wind Turbine Platforms

In this study, we demonstrate the ability of adjustable tuned mass dampers (TMDs) to reduce the platform motion of floating offshore wind turbines (FOWTs). The TMDs are located in the hull and provide control authority by varying the amount of water ballast and compressed air in a reservoir over time. The optimal TMD settings depend on the wind and wave conditions of the FOWT. We present an open-loop control scheme that changes the TMD natural frequency based on sea state and a simple method for estimating the peak wave period and significant wave height. The performance of this open-loop control is compared to ideal control of the TMDs (set knowing the exact sea state), a TMD with a constant natural frequency targeting the design load case with the greatest platform motion, and a baseline set of simulations of the platform without TMDs. The constant natural frequency case performs nearly as effectively as the actively controlled case, suggesting that the TMDs can be simply designed for extreme load conditions and provide consistent control over a range of environments; however, the methods used to find the optimal TMD parameters and estimate sea state statistics could be used in other aspects of FOWT control and design.

artificial intelligence↗
DOE OSTI2013

Decommissioning and Dismantling of the Floating Maintenance Base 'Lepse' - 13316

The Lepse was built in Russia in 1934 and commissioned as a dry cargo ship. In 1961 she was re-equipped for use as a nuclear service ship (NSS), specifically a floating maintenance base (FMB), to support the operation of the civilian nuclear fleet (ice-breakers) of the USSR. In 1988 Lepse was taken out of service and in 1990 she was re-classified as a 'berth connected ship', located at a berth near the port of Murmansk under the ownership of Federal State Unitary Enterprise (FSUE) Atomflot. Lepse has special storage facilities for spent nuclear fuel assemblies (SFA) that have been used to store several hundred SFAs for nearly 40 years. High and intermediate-level liquid radioactive waste (LRW) is also present in the spent nuclear fuel assembly storage channels, in special tanks and also in the SFA cooling circuit. Many of the SFAs stored in Lepse are classified as damaged and cannot be removed using standard procedures. The removal of the SFA and LRW from the Lepse storage facilities is a hazardous task and requires specially designed tools, equipment and an infrastructure in which these can be deployed safely. Lepse is a significant environmental hazard in the North West of Russia. Storing spent nuclear fuel and high-level liquid radioactive waste on board Lepse in the current conditions is not acceptable with respect to Russian Federation health, safety and environmental standards and with international best practice. The approved concept design for the removal of the SFA and LRW and dismantling of Lepse requires that the ship be transported to Nerpa shipyard where specialist infrastructure will be constructed and equipment installed. One of the main complexities of the Project lies within the number of interested stakeholders involved in the Project. The Lepse project has been high focus on the international stage for many years with previous international efforts failing to make significant progress towards the objective of decommissioning Lepse. The Northern Dimension Environmental Partnership (NDEP) approved an internationally funded project to identify and prioritise nuclear and environmental hazards in NW Russia. Within this project the Lepse was recognised as being one of the highest nuclear hazards in NW Russia. Removal of SNF, SRW and LRW from Lepse requires innovative design and development of bespoke equipment. The main drivers of the NDEP Donors are first to safely transport Lepse in 2012 from her current berth close to the local population in Murmansk to the nominated dismantling shipyard, and secondly to raise Lepse from the water in 2013 onto the slip-way at the dismantling shipyard. A description is provided of the approach and progress towards preparing the Lepse for the removal of SFAs and other radioactive waste, to decontaminate and then dismantle the vessel under international donor funding. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

The study on overall I and C system scheme for floating nuclear power plant ACP100S and ACP25S - 189

Floating nuclear power plant (FNPP) is built on the offshore platform and it is defined as a kind of Small and Modular Reactor (SMR) due to its power level. The FNPP can provide power supply, fresh water and high temperature steam and other products. So it can be used as special energy sources, such as regional power supply, district heating and offshore oil exploitation. At present, two types of FNPP, named ACP100S and ACP25S, are developed by China National Nuclear Corporation (CNNC). In this paper, the overall technical parameters and overall technical scheme of ACP100S and ACP25S are introduced firstly. On the basis of these schemes, the different arrangements of nuclear power plant which are used for meeting the different energy demands are discussed. Due to the different configuration of nuclear power plant, the requirements for the Instrument and Control (I and C) system are different, so the paper discusses some overall configurations of I and C system under the several typical arrangements models, i.e., the single reactor and the single turbine, the double reactors and double turbines, and the double reactors and the single turbine. Furthermore, the characteristics of these overall I and C configurations are analyzed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗