Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

The breakup of a long-period comet is not a likely match to the Chicxulub impactor

Since the discovery of Ir in the clay layer at the K-Pg boundary, scientists have sought to constrain the origin of the extraterrestrial impactor that triggered the end-Cretaceous mass extinction of the non-avian dinosaurs and other species. While the first proposal was for an asteroid, for a while some theories invoked a cometary impactor to explain perceived periodicities in mass extinctions. Such models have long been disfavored by the mass of Ir in the layer, inferred to be 2.0−2.8×10^(11)cu.g. The size of the Chicxulub crater leads to an estimated asteroid impactor diameter, D≈10km. Comets typically impact at higher speeds, reducing the impactor mass for the same impact energy. Although it is increasingly recognized that a continuum exists between comets and asteroids, ’comets’ are considered to be more ice-rich (estimates for 67P/Churyumov-Gerasimenko are about 20%;), implying lower Ir contents per impactor mass. A carbonaceous chondrite-like asteroid of the appropriate size would likely deliver ≈2.3×10^(11)g of Ir, in the center of the estimated mass range of the global Ir layer; but a comet would only deliver ∼0.1×10^(11)g, because it would be less massive. Although these conclusions are long standing, Siraj and Loeb have recently argued anew in favor of a comet over an asteroid, based on dynamical and geochemical evidence. Here we demonstrate that their arguments are based on misinterpretations of the literature, and that an asteroid is in fact still highly favored over a comet.

Steven J. Desch↗
NASA NTRS2022

The breakup of a long-period comet is not a likely match to the Chicxulub impactor

Since the discovery of Ir in the clay layer at the K-Pg boundary [1], scientists have sought to constrain the origin of the extraterrestrial impactor that triggered the end-Cretaceous mass extinction of the non-avian dinosaurs and other species. While the first proposal was for an asteroid, for a while some theories invoked a cometary impactor to explain perceived periodicities in mass extinctions. Such models have long been disfavored by the mass of Ir in the layer, inferred to be2.0−2.8×1011g. The size of Chicxulub crater leads to an estimated asteroid impactor diameter,D≈10 km. Comets typically impact at higher speeds, reducing the impactor mass for the same impact energy. Although it is increasingly recognized that a continuum exists between comets and asteroids, ’comets’ are considered to be more ice-rich (estimates for67P/ Churyumov-Gerasimenko are about 20%;), implying lower Ir contents per impactor mass. A carbonaceous chondrite-like asteroid of the appropriate size would likely deliver≈2.3×1011gof Ir, in the center of the estimated mass range of the global Ir layer; but a comet would only deliver∼0.1×1011g, because it would be less massive. Although these conclusions are long standing, Siraj & Loeb have recently argued anew in favor of a comet over an asteroid, based on dynamical and geochemical evidence. Here we demonstrate that their arguments are based on misinterpretations of the literature, and that an asteroid is in fact still highly favored over a comet.

Steven J Desch↗
NASA NTRSDate not supplied

Towers: Critical Initial Infrastructure for the Moon, Such as a Power Module Support

Towers are an efficient structure commonly used to elevate systems against a gravity field, such as above the surface of a planet or the Moon. Towers can be used to elevate antennas, transmitters and sensors for communication, navigation, and observation infrastructure in support of surface operations. Near the Lunar poles, elevation of rotating solar panels enables nearly continuous panel illumination for solar power production despite the Sun remaining near the horizon year-round. Further, once technology is developed for tower assembly, this same technology can be extended to the assembly of a variety of structures including rocket blast containment shields, bridges, shelters, and habitats from either Earth-sourced or Lunar-sourced structural members. Environmental factors on the Lunar surface are vastly different than those found on Earth and have significant impact on the design of towers. Towers designed for the Lunar surface have no heritage nor Earth analog. The designs discussed herein are therefore breaking new ground creating a fundamentally new class of structures outside of current experience and intuition. The purpose of this paper is to: a) describe the unique environmental factors affecting tower design on the Lunar surface compared to Earth-based systems, b) evaluate two structural forms for the tower; telescoping tubes and an assembled truss, as well as c)provide recommendations on when each structural form is most suitable. A major contribution presented in the current paper is to provide parametric plots and supporting equations of mass and volume versus module power level and blanket height above the Lunar surface for the solar array application, to enable system level studies of optimum power module distribution and size. A secondary contribution are plots of the mass and volume of aluminum or structural glass required for assembled truss towers formed from Lunar derived structural members. An objective of achieving 1 MW of total power has been used to enable comparison of structural forms, because the total mass of solar arrays is consistent. It will be shown that for moderate module sizes, up to ~50 kW power modules, based on a telescoping tube tower have advantages, but for power modules from 50 kW to 200 kW an assembled truss tower can be created with half to one third of the tube tower mass. More significantly, when shipped from Earth, an assembled truss tower can be packed into 1/14th to 1/25th of the tube tower volume. Truss designs in the 100 kW to 200 kW range will be shown to be a favorable when assembled from either graphite-epoxy angles shipped from Earth or aluminum angles fabricated from Lunar materials. 50 kW towers are an attractive choice for both a telescoping or assembled tower with the solar arrays elevated 10 m above the Lunar surface, while increased solar array elevation favors 100 kW to 200 kW power modules.

assembly↗
NASA NTRS2022

Newly Identified Climatically and Environmentally Significant High-Latitude Dust Sources

Dust particles from high latitudes have a potentially large local, regional, and global significance to climate and the environment as short-lived climate forcers, air pollutants, and nutrient sources. Identifying the locations of local dust sources and their emission, transport, and deposition processes is important for understanding the multiple impacts of high-latitude dust (HLD) on the Earth’s systems. Here, we identify, describe, and quantify the source intensity (SI) values, which show the potential of soil surfaces for dust emission scaled to values 0 to 1 concerning globally best productive sources, using the Global Sand and Dust Storms Source Base Map (G-SDS-SBM). This includes 64 HLD sources in our collection for the northern (Alaska, Canada, Denmark, Greenland, Iceland, Svalbard, Sweden, and Russia) and southern (Antarctica and Patagonia) high latitudes. Activity from most of these HLD sources shows seasonal character. It is estimated that high-latitude land areas with higher (SI ≥ 0.5), very high (SI ≥ 0.7), and the highest potential (SI ≥ 0.9) for dust emission cover > 1 670 000 km 2 , > 560 000 km 2 , and > 240 000 km 2 , respectively. In the Arctic HLD region (≥ 60◦ N), land area with SI ≥ 0.5 is 5.5 % (1 035 059 km 2 ), area with SI ≥ 0.7 is 2.3 % (440 804 km 2 ), and area with SI ≥ 0.9 is 1.1 % (208 701 km 2 ). Minimum SI values in the northern HLD region are about 3 orders of magnitude smaller, indicating that the dust sources of this region greatly depend on weather conditions. Our spatial dust source distribution analysis modeling results showed evidence supporting a northern HLD belt, defined as the area north of 50◦ N, with a “transitional HLD-source area” extending at latitudes 50–58◦ N in Eurasia and 50–55◦ N in Canada and a “cold HLD-source area” including areas north of 60◦ N in Eurasia and north of 58◦ N in Canada, with currently “no dust source” area between the HLD and low-latitude dust (LLD) dust belt, except for British Columbia. Using the global atmospheric transport model SILAM, we estimated that 1.0 % of the global dust emission originated from the high-latitude regions. About 57 % of the dust deposition in snow- and ice-covered Arctic regions was from HLD sources. In the southern HLD region, soil surface conditions are favorable for dust emission during the whole year. Climate change can cause a decrease in the duration of snow cover, retreat of glaciers, and an increase in drought, heatwave intensity, and frequency, leading to the increasing frequency of topsoil conditions favorable for dust emission, which increases the probability of dust storms. Our study provides a step forward to improve the representation of HLD in models and to monitor, quantify, and assess the environmental and climate significance of HLD.

high latitude dust↗
NASA NTRSDate not supplied

Ground Test Technology Demonstration for Nuclear Thermal Propulsion Engines

Nuclear Thermal Propulsion (NTP) engines have been deemed a key technology to enable human missions to Mars due to their high efficiency, also known as specific impulse (Isp). Ground testing the NTP engine is critical in maturing the technology and increasing the design’s Technology Readiness Level (TRL), thus mitigating risk from NTP engine performance/operations. NTP engine development began with open-air ground testing through the Rover/NERVA program back in the 1960s when regulatory requirements were not as stringent as they are today. Due to the formation of regulatory bodies, increase in oversight and environmental requirements, the exhaust gas released from NTP engines must be captured or processed to gain approval in the case that the exhaust gas contains fission products from the nuclear fuel elements within the reactor. Ground test campaigns following Rover/NERVA focused on the certification of a full scale NTP engine, which led to exhaust processing systems such as the Rocket Exhaust Capture System (RECS) and Real Time (RT) exhaust processing. These systems were deemed favorable for regulatory compliance but have a high initial investment cost. Reassurance on the feasibility of ground testing and the NTP engine technology likely need to be achieved before NASA invests in these systems. Recently the objectives for NTP engine ground testing have shifted from certification testing of a full scale engine to demonstration testing of a subscale engine. The shift to demonstration testing allows for a shorter testing duration and a lower operational thrust (for demo testing purposes only) to demonstrate the NTP engine (5k-12.5k lbf). Due to these factors, the infrastructure, consumables, total footprint, and exhaust system complexity are able to be drastically reduced, thus reducing cost significantly. The High-pressure Exhaust Capture System (HECS) concept was designed for a NTP engine ground test demonstration. The HECS concept greatly reduces cost compared to previous concepts and suggests favorable regulatory acceptance due to its ability to capture all of the exhaust gas from the NTP engine.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Engine Technology Demonstration Testing

Nuclear Thermal Propulsion (NTP) engines have been deemed a key technology to enable human missions to Mars due to their high efficiency, also known as specific impulse (Isp). Ground testing the NTP engine is critical in maturing the technology and increasing the design’s Technology Readiness Level (TRL), thus mitigating risk from NTP engine performance/operations. NTP engine development began with open-air ground testing through the Rover/NERVA program back in the 1960s when regulatory requirements were not as stringent as they are today. Due to the formation of regulatory bodies, increase in oversight and environmental requirements, the exhaust gas released from NTP engines must be captured or processed to gain approval in the case that the exhaust gas contains fission products from the nuclear fuel elements within the reactor. Ground test campaigns following Rover/NERVA focused on the certification of a full scale NTP engine, which led to exhaust processing systems such as the Rocket Exhaust Capture System (RECS) and Real Time (RT) exhaust processing. These systems were deemed favorable for regulatory compliance but have a high initial investment cost. Reassurance on the feasibility of ground testing and the NTP engine technology likely need to be achieved before NASA invests in these systems. Recently the objectives for NTP engine ground testing have shifted from certification testing of a full scale engine to demonstration testing of a subscale engine. The shift to demonstration testing allows for a shorter testing duration and a lower operational thrust (for demo testing purposes only) to demonstrate the NTP engine (5k-12.5k lbf). Due to these factors, the infrastructure, consumables, total footprint, and exhaust system complexity are able to be drastically reduced, thus reducing cost significantly. The High-pressure Exhaust Capture System (HECS) concept was designed for a NTP engine ground test demonstration. The HECS concept greatly reduces cost compared to previous concepts and suggests favorable regulatory acceptance due to its ability to capture all of the exhaust gas from the NTP engine.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Toward The Development of Hailstorm Climatologies Derived From Reanalyses and Infared/Passive Microwave Satellite Imagers

Geostationary satellite imagers, such as those of the Geostationary Operational Environmental Satellite (GOES) and Meteosat series, provide both historical and near-real-time observations of cloud top patterns that are commonly associated with severe convection. Environmental conditions favorable for severe weather are thought to be represented well by reanalyses. Predicting exactly where convection and costly storm hazards like hail will occur using models or satellite imagery alone, however, is extremely challenging. The multivariate combination of satellite-observed cloud patterns with reanalysis environmental parameters, linked to United States Next Generation Weather Radar- (NEXRAD-) estimated Maximum Expected Size of Hail (MESH) using a deep neural network (DNN), enables estimation of potentially severe hail likelihood for any observed storm cell. These estimates are specifically designed to make hail likelihood distinctions based on satellite-indicated points of deep convection within environments favorable for storm development. We seek an approach that can be used to estimate climatological hailstorm frequency and risk throughout the historical satellite data record. This presentation demonstrates that statistical distributions of convective parameters from satellite and reanalysis show separation between non-severe/severe hailstorm classes for predictors including overshooting cloud top temperature and area characteristics, convective available potential energy, vertical wind shear, 500 hPa temperature, mid-level lapse rate, precipitable water, and convective inhibition. These complex, multivariate predictor relationships are exploited within a DNN to produce a hail likelihood metric with a critical success index of 0.504 and Heidke skill score of 0.403, which is exceptional among recent analogous hail studies. Furthermore, applications of the DNN to select case studies demonstrate good qualitative agreement between hail likelihood and MESH. These hail classifications are aggregated across an 11-year GOES-12/13 image database to derive a hail frequency and severity climatology, which denotes the Central Plains, the Midwest, and northwestern Mexico as being the most hail-prone regions within the domain studied. Opportunities for training and applying DNN-based hailstorm predictions to recently developed GOES-8/10/12/13/16 and Meteosat Second Generation convective storm detection and characterization climatologies over South America and South Africa, respectively, will also be presented.

Kristopher Bedka↗
NASA NTRSDate not supplied

Acid Alteration of Clay Minerals With Implication for Mars’ Surface Processes

The co-occurrence of phyllosilicates (clays) and sulfate stratigraphies at many locations on Mars are associated with a sharp change in surface conditions from neutral/alkaline pH during the Noachian (4.1-3.7 Ga) which favored the formation of clays to acidic conditions during the Hesperian (3.7-2.9 Ga) which favored the formation of sulfates. Yet, if these two contrasting geosystems were temporarily sequential, it is unknown how the Hesperian acidic conditions altered the previously formed clay units. We performed laboratory batch experiments to fingerprint the diagnostic features produced during interactions of Mars-analog clays and acidic solutions. Two clays, and silicon (IV) oxide, were reacted with solution of either sulfuric acid or filtered natural acid rock drainage (ARD) in plastic bottles. The solutions were adjusted at four pH values (1, 3, 5, and 7) and reacted at 4, 30, and 80°C for 3, 7, and 14 days. At the end of the experiments, the filtered supernatants were analyzed by ICP-MS while the solids were characterized by X-Ray Diffraction; Energy-Dispersive X-Ray Fluorescence analyses; Raman and Short-Wave Infrared spectroscopies and Scanning Electron Microscopy. Results show that the solution chemistry played a key role in the evolution of the clay-solution systems. In H2SO4 systems, the solution pH steadily increased due to partial clay dissolution with no secondary phase formation detected. Contrary, in the ARD systems, the pH decreased due to the ample presence of Fe which controlled both the reactivity of clays by the growth of protecting surface coatings and the solution pH by the precipitation of Fe nanophases; secondary phase detected included goethite, jarosite, gypsum, and siderite. These results indicate that, on Mars, the chemical interaction between clays and acidic solutions was complex and dependent on the solution chemistry. Acidic, sulfate-rich solutions have a high dissolution capacity and could have induced widespread clay disintegration. Notably, if Fe-rich ARD was involved, the clays on Mars could have remained stable during acidic Hesperian period due to formation of protective coatings. Comparison of our results with martian observations will be performed to determine how acidic conditions could potentially affect clays in sedimentary settings, including the Gale crater.

L. Lefticariu↗
NASA NTRS2023

Statistical Study of the Non-Thermal Continuum Radiation Beaming Angle Measured By the High Frequency Receiver on Van Allen Probes-A

The nonthermal continuum (NTC) radiation beaming angle is computed over the entire Van Allen Probes-A mission when the spacecraft was in the dawn sector. The conditions in the dawn sector are favorable for the wave vector to lie near/in the spacecraft's spin plane allowing a favorable estimate of the beaming angle, and the dawn sector is also advantageous in that previous studies show NTC occurrence to peak in this sector. We found that scatter plots, over the entire mission, of beaming angle versus magnetic latitude form a distinct inverted-V pattern, with the apex at/near the magnetic equator. This pattern was sharpest for frequencies (f) ≲ 100 kHz. Using the NTC beaming formula from the linear mode conversion theory (LMCT), we show that such an inverted-V pattern is expected due to the large variation in the plasmapause location over the entire mission. The theoretical derived pattern qualitatively reproduces the observed pattern but not quantitatively. The lack of quantitative agreement is discussed and is attributed to several factors, one factor is off-centered emissions from the radio window. The qualitative agreement strongly supports LMCT as being the dominant mechanism generating NTC for f ≲ 100 kHz. For f ≳ 100 kHz, the inverted-V pattern becomes less distinct, and strong near-equatorial beaming is observed. After considering contamination of our selections by left-handed polarized AKR, our study suggests that besides LMCT another unidentified NTC generation mechanism becomes important for f ≳ 100 kHz.

Linear Mode Conversion Theory↗
NASA NTRSDate not supplied

Experimental Results of a Rapidly Cycled Temperature Swing Adsorption Pump in a Terrestrial Environment

To improve the increasing CO 2 levels on Earth, technology for carbon capture and utilization must be efficient and cost effective. One major contributor of atmospheric CO 2 is post-combustion flue gas, which can contain up to 20% CO 2 . Scrubbing this CO 2 could reduce the environmental impact of this common industrial process. In off-Earth environments, capturing and utilizing CO 2 from space resources is useful for crewed spaceflight life support. Specifically, the Bosch process, which produces water and carbon powder by reacting CO 2 and hydrogen, is a possible in-situ resource utilization (ISRU) architecture for the Moon and Mars. The Rapid Cycle Temperature Swing Adsorption (RC-TSA) pump is an innovative technology designed to capture CO 2 efficiently. The RC-TSA leverages a stacked plate geometry to cycle multiple zeolite-coated beds. The thin layers allow for rapid heat transfer of the zeolite coating, which improves performance over previously tested pump designs. The design is favorable for scalability and manufacturability, which are forward work. Initial testing of the sorption pump using a simulated flue gas environment shows favorable breakthrough capacities and reduced cycle times. Results show promise for on- and off-Earth applications, such as a Martian surface and crewed spaceflight environments.

adsorption pump↗
NASA NTRSDate not supplied

Self-Aligned Focusing Schlieren at the 0.3-M Transonic Cryogenic Tunnel and the National Transonic Facility

The implementation of a self-aligned focusing schlieren (SAFS) system at two cryogenic wind tunnels at NASA Langley Research Center is discussed. Risk-reduction testing of the SAFS system was first performed at the 0.3-M Transonic Cryogenic Tunnel to evaluate the system’s operation in a small-scale characteristic cryogenic facility. Testing was conducted with three models: a three-quarter span 25.4-mm-diameter cylinder, a semi-span 65A006 tapered unswept airfoil, and a full-span SC(3)-0712 airfoil. Testing with the cylinder and semi-span airfoil revealed a highly dynamic shock environment, whereas the shock on the full-span airfoil was stationary, solidifying the usage of this model for a pre-/post-shock particle tracking velocimetry measurement. Temperature-induced polarization-altering window stresses were encountered during low-temperature testing, and were mitigated using a “non-ideal” quartz/quartz Rochon prism that had largely been neglected since the SAFS system’s first introduction in favor of the more favorable “ideal” glass/quartz Rochon prism. The size of the SAFS system was then decreased in order to fit inside an environmentally-controlled camera can enclosure at the National Transonic Facility (NTF) for testing of a sting-mounted aircraft model. The SAFS system was demonstrated to be effective at filtering out the large density gradient flow in the 0.3-M plenum, and the thick, high density turbulent boundary layers on the wind tunnel walls at the NTF. Results of the testing campaigns and improvements to future systems are discussed.

Joshua M. Weisberger↗
NASA NTRSDate not supplied

Self-Aligned Focusing Schlieren at the 0.3-M Transonic Cryogenic Tunnel and the National Transonic Facility

The implementation of a self-aligned focusing schlieren (SAFS) system at two cryogenic wind tunnels at NASA Langley Research Center is discussed. Risk-reduction testing of the SAFS system was first performed at the 0.3-M Transonic Cryogenic Tunnel to evaluate the system’s operation in a small-scale characteristic cryogenic facility. Testing was conducted with three models: a three-quarter span 25.4-mm-diameter cylinder, a semi-span 65A006 tapered unswept airfoil, and a full-span SC(3)-0712 airfoil. Testing with the cylinder and semi-span airfoil revealed a highly dynamic shock environment, whereas the shock on the full-span airfoil was stationary, solidifying the usage of this model for a pre-/post-shock particle tracking velocimetry measurement. Temperature-induced polarization-altering window stresses were encountered during low-temperature testing and were mitigated using a “non-ideal” quartz/quartz Rochon prism that had largely been neglected since the SAFS system’s first introduction in favor of the more favorable “ideal” glass/quartz Rochon prism. The size of the SAFS system was then decreased in order to fit inside an environmentally controlled camera can enclosure at the National Transonic Facility (NTF) for testing of a sting-mounted aircraft model. The SAFS system was demonstrated to be effective at filtering out the large density gradient flow in the0.3-M plenum, and the thick, high density turbulent boundary layers on the wind tunnel walls at the NTF. Results of the testing campaigns and improvements to future systems are discussed.

Joshua M Weisberger↗
NASA NTRS2024

Direct Numerical Simulation of Smooth-Body Flow Separation Around a Ramp

Spanwise-periodic computation of a turbulent flow past a two-dimensional smooth ramp geometry is performed in the form of a direct numerical simulation. The Reynolds number based on the ramp height is about 147,000. A straight section that precedes the smooth ramp allows the incoming turbulent boundary layer to grow under a weak favorable pressure gradient. The boundary layer introduced at the domain inlet has a momentum-thickness based Reynolds number of 2000. The turbulent boundary layer nearing the ramp first interacts with a relatively stronger favorable pressure gradient, followed by a strong adverse pressure gradient. Consequently, the boundary layer experiences a modest acceleration before decelerating and separating. Analysis of the data over this region hints at the formation of an internal layer beneath the accelerated boundary layer. The analysis also reveals that this internal layer forms the origin of the free shear layer that emerges in the deceleration region and separates. The streamwise extent of the separated region is comparable to the ramp length, while the viscous layer thickness near reattachment is about the same as the ramp height; hence, the boundary layer undergoing separation and subsequent reattachment in the present configuration experiences its thickness being amplified by about tenfold. The reattached flow continues to develop further under a diminishing pressure gradient in the recovery region in a similar fashion to a zero pressure gradient turbulent boundary layer.

Turbulence↗
NASA NTRSDate not supplied

Calcium and Magnesium Distribution Between Sulfide and Silicate Melts: Thermodynamic Modeling and Insights into Mercury's Mantle-Crust Differentiation

Mercury stands out as the terrestrial planet with the lowest degree of oxidation among all planets of our solar system. It is characterized by a high abundance of sulfur, which is expected to replace oxygen in silicate melts. This sulfur enrichment could lead to sulfide saturation in its mantle, potentially resulting in the formation of sulfides rich in calcium and magnesium. Utilizing experimental data from the literature, we constructed a thermodynamic model to explore the partitioning of calcium and magnesium between sulfide and silicate melts. This model aims to improve our comprehension of the chemical equilibria driving the process of mantle-crust differentiation on Mercury. Our models indicate that increased temperature, decreased pressure, and low concentrations of iron, oxygen, and carbon within the sulfide phase, along with low sulfur concentrations in the silicate phase, favor calcium’s partitioning into the sulfide. Additionally, magnesium partitioning into the sulfide melt is favored with decreased pressure, decreased temperature, low concentrations of iron and calcium within the sulfide, and low concentrations of sulfur within the silicate. Our results suggest that up 9.4% and 5.6% Ca and Mg, respectively, can be present in sulfides equilibrated with sulfide-saturated silicate melts during mantle-crust differentiation. Further investigation will focus on the distribution of sulfide phases within the mantle and crust to better constrain Mercury’s internal structure.

Taylor McCombs↗
NASA NTRSDate not supplied

The Use of the BSRN Data as A Benchmark for the POWER Hourly DHI and DNI and In Validating Derived Hourly GTI

The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests. The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests.

Taiping Zhang↗
NASA NTRSDate not supplied

Modification of Mach 6 Freestream Flow by Pitot Probe Bow Shock as Measured by Line FLDI and SAFS

Measurements of the flow in front of flat-face Pitot probes in NASA Langley ResearchCenter’s 20-Inch Mach 6 Air Tunnel were made using a 35-point line focused laser differentialinterferometer (FLDI), a two-point FLDI, and a self-aligned focusing schlieren system. Thesesystems were used to make measurements of flow unsteadiness between the bow shock andPitot probe face, while also probing the freestream region just upstream of the bow shock.Shock standoff distances from the non-intrusive measurements match closely with analyticalsolutions using the probe face diameter. Acoustic wave angles and velocities in the freestreamcompare favorably with DNS simulations of a Mach 6 freestream flow, and wave velocities in thepost-shock region slow as they approach the probe face. Peak frequencies in the post-shockregion as measured by FLDI compare favorably to the estimates computed from the shockstandoff distance for most probe diameters. With increasing unit Reynolds number, fluctuationintensities in the post-shock region were attenuated below the intensities of the freestream, witha spectral, spatial, and probe size dependence. Pitot probe power spectral density estimatesare presented from the test campaign, which can be compared with FLDI and SAFS data toevaluate the applicability of the transfer functions derived from computational simulations.

Joshua M Weisberger↗
DOE OSTI2021

Review of Low-Cost Organic and Inorganic Phase Change Materials with Phase Change Temperature between 0°C and 65°C

Phase change materials (PCMs) that undergo a phase transition may be used to provide a nearly isothermal latent heat storage at the phase change temperature. This work reports the energy storage material cost ($/kWh) of various PCMs with phase change between 0-65°C. Four PCM classes are analyzed for their potential use in building systems: 1) inorganic salt hydrates, 2) organic fatty acids, 3) organic fatty alcohols, and 4) organic paraffin waxes. Many salt hydrates have low material costs (0.09 - 2.53 $-kg-1), high latent heat of fusion (100-290 J-g-1), and high densities (1.3-2.6 g-cm-3), leading to favorable volumetric storage density and low energy storage costs, 50-130 kWh-m3 and 0.90-40 $-kWh-1, respectively. Some salts are notably more expensive due to their scarcity or pressures from competing industries such as lithium-based salts. Fatty acids have the lowest energy storage cost in the temperature range 8-17°C at 6.50 – 40 $-kWh-1. Despite favorable latent heat (125 – 250 J-g-1) their low density gives (0.9 g-cm3) gives poor volumetric storage capacity, 32 – 80 kWh-m3. Fatty alcohols generally have high material costs 2.50 – 200 $-kg-1 which leads to high energy storage costs, 40-3000 $/kWh. With latent heat and density similar to fatty acids, fatty alcohols have poor volumetric energy storage, 43 – 55 kWh-m-3.Paraffin waxes containing only a single length carbon chain have a higher energy cost (15 – 500 $-kWh-1) than generic paraffin waxes containing many lengths of carbon chains (7 – 30 $-kWh-1). Pure waxes have a discrete phase change temperature due to their homogeneity. In contrast, a less refined generic wax with several carbon chain lengths is more likely to have a pronounced temperature glide during its phase change. Pure single carbon chain waxes are generally required for applications <45°C as generic paraffin waxes melt between 45-70°C. For many waxes, a solid-solid transition occurs at temperatures below the solid-liquid phase change. For pure paraffins with carbon content ≥22 C atoms, these transitions may appear near the same temperature resembling a temperature glide.The challenges with fatty acids, fatty alcohols, and waxes are low thermal conductivity, low density, some flammability concerns, and compatibility issues with some common engineering materials such as polymers. Challenges with salt hydrates are pronounced supercooling (>5°C), incongruent melting, and corrosiveness. All PCMs may degrade if exposed to ambient conditions and therefore require proper sealing.

Hirschey, Jason↗
DOE OSTI2021

Topical Report – Findings on Subtask 2.7 – Wet ESP and Aerosol Testing at Coal Creek Station

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion carbon capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery. The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the unique components present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants by contributing to aerosol formation. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and flue gas particulate provides nucleation sites where amine vapors can condense as aerosols. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, particulate components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to fully characterize aerosol behavior with various control technologies installed to better optimize aerosol mitigation technology for CO 2 capture. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on mitigating formation of problematic aerosols at Great River Energy’s Coal Creek Station, upstream of the PCCC system. Determine the effectiveness of the Mitsubishi Heavy Industries (MHI) proprietary amine emission reduction unit (AERU) as a postcapture solvent recovery system for reducing aerosol emissions and extending solvent life downstream of the PCCC system. Determine the impact of aerosols on the efficiency and degradation products of both commercial and advanced solvents within the PCCC system. Work was conducted at Coal Creek Station Unit 1 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then optionally routed through a WESP before passing to the CO 2 absorber columns. The MHI solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . Flue gas exiting the absorber column was routed to MHI’s proprietary AERU to recover entrained solvent. The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Particulate was measured, collected, and analyzed from multiple locations throughout the pilot-scale system. Unlike the performance observed in prior work, the inlet FGD and DCC did not remove significant particulate matter from the flue gas. This appears to be due to a difference in the nature of the particulate. The DCC seemed to increase particulate size and count, most likely owing to water condensing onto the surfaces of fly ash particles. When the WESP was operated, it achieved >95% particulate capture. Very little particulate matter or indications of solvent were detected at the AERU outlet. When operating with advanced KS 21 solvent, the particulate material at the AERU outlet was even further decreased. Solvent analysis showed that some species derived from flue gas and ash were slowly concentrating in the solvent over the duration of the test. The levels observed were reported to be within expected ranges and were not of concern to MHI. A high-level techno-economic assessment of installing CO 2 capture at Coal Creek Station suggested that, when using a standard monoethanolamine (MEA)-based solution with simple heat integration, the energy penalty to net generation would be 34%. The bulk of this was due to steam losses for regenerating solvent, followed by parasitic electrical demand for CO 2 compression and then by increased parasitic load for pushing flue gas through the absorber column. These demands could be decreased with a more advanced solvent that exhibits lower heat of regeneration and lower pressure drop than does a simple MEA solution. Further energy could be saved with more thorough heat integration to recover useful energy from the steam used for solvent regeneration. Installing a WESP was predicted to increase the cost of electricity by nearly $5/MWh. This would become cost-effective if solvent losses were roughly 10 times the baseline estimate when not using a WESP but could be returned to baseline by installing the WESP. Piping CO 2 for storage in more favorable geology could help with carbon capture and storage economics. Although storing off-site would necessitate construction of a CO 2 transport pipeline, the cost of this pipeline might be more than offset by reducing the number of wells required, the depths of the wells required, and the electrical demand for the CO 2 compressor. Additional factors that favor off-site storage costs include smaller expected CO 2 plume sizes, which translates to less monitoring and fewer landowner agreements. More detailed assessment of the specific geology in the region under and around Coal Creek Station would be needed to accurately assess the costs and benefits of different storage site options. This subtask was cofunded through the Energy & Environmental Research Center–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission.

Strege, Joshua↗