Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ethanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Chemometric optimisation of pressurised liquid extraction for the determination of alliin and S‐allyl‐cysteine in giant garlic ( Allium ampeloprasum L.) by liquid chromatography tandem mass spectrometry

Abstract Introduction Giant garlic is a functional food that contains different kinds of bioactive molecules with beneficial effects on chronic noncommunicable diseases like diabetes and cardiovascular conditions. Considering biosynthesis pathways, abundance, and biological activity, alliin and S‐allyl‐cysteine were used as chemical markers of organosulphur compounds present in giant garlic. Objective To establish a chemometric optimisation of pressurised liquid extraction for the determination of alliin and S‐allyl‐cysteine in giant garlic by liquid chromatography tandem mass spectrometry (LC–MS/MS). Methodology Samples were blanched (ca. 90°C for 10 min) to inactivate alliinase and γ‐glutamyl transpeptidase enzymes and then freeze‐dried. Chemometric optimisation was performed via response surface methodology based on central composite design (CCD). Organosulphur compound yields were determined applying a validated LC–MS/MS method in multiple reaction monitoring (MRM) mode using the following transitions: for alliin m/z 178 → 74 and for S‐allyl‐cysteine m/z 162 → 41. Results According to CCD results, under constant conditions of pressure (1500 psi) and time (20 min), the optimal conditions for pressurised liquid extraction of alliin and S‐allyl‐cysteine were 70.75 and 68.97% v/v of ethanol in extraction solvent and 76.45 and 98.88°C as extraction temperature, respectively. Multiple response optimisation for the simultaneous extraction of both organosulphur compounds was established via desirability function. Under these conditions, 2.70 ± 0.27 mg g −1 dry weight (DW) of alliin and 2.79 ± 0.22 mg g −1 DW of S‐allyl‐cysteine were extracted. Conclusions These results clearly demonstrated that pressurised liquid extraction is an efficient green technique to extract bioactive organosulphur compounds from giant garlic. Extraction yields were significantly ( p < 0.05) higher than those obtained with conventional ultra‐turrax extraction.

Peterssen‐Fonseca, Darlene↗
DOE OSTI2022

Biomass formation and sugar release efficiency of Populus modified by altered expression of a NAC transcription factor

Woody biomass is an important feedstock for biofuel production. Manipulation of wood properties that enable efficient conversion of biomass to biofuel reduces cost of biofuel production. Wood cell wall composition is regulated at several levels that involve expression of transcription factors such as wood-/secondary cell wall-associated NAC domains (WND or SND). In Arabidopsis thaliana, SND1 regulates cell wall composition through activation of its down-stream targets such as MYBs. The functional aspects of SND1 homologs in the woody Populus have been studied through transgenic manipulation. In this study, we investigated the role of PdWND1B, Populus SND1 sequence ortholog, in wood formation using transgenic manipulation through over-expression or silencing under the control of a vascular-specific 4-coumarate-CoA ligase (4CL) promoter. As compared with control plants, PdWND1B-RNAi plants were shorter in height, with significantly reduced stem diameter and dry biomass, whereas there were no significant differences in growth and productivity of PdWND1B over-expression plants. Conversely, PdWND1B over-expression lines showed a significant reduction in cellulose and increase in lignin content, whereas there was no significant impact on lignin content of downregulated lines. Stem carbohydrate composition analysis revealed a decrease in glucose, mannose, arabinose, and galactose, but an increase in xylose in the over-expression lines. Transcriptome analysis revealed upregulation of several downstream transcription factors and secondary cell wall related structural genes in the PdWND1B over-expression lines, partly explaining the observed phenotypic changes in cell wall chemistry. Relative to the control, glucose release efficiency and ethanol production from stem biomass was significantly reduced in over-expression lines. Our results show that PdWND1B is an important factor determining biomass productivity, cell wall chemistry and its conversion to biofuels in Populus.

09 BIOMASS FUELS↗
DOE OSTI2022

Synthesis of a new 1,2,4-triazine derived Azidoxime

A 1,2,4-triazine based azidoxime was formed via the substitution of a chloroxime (3) with sodium azide in ethanol. This compound was characterized via single-crystal X-ray diffraction. This material has a calculated density of 1.746 g•cm –1 and is less sensitive to impact, spark, and friction, as compared to PETN and RDX. The dehydrated material has a calculated density of 1.823 g•cm –1 and the detonation pressure and velocity of 4 are calculated to be 29.1 GPa and 8.67 km•s –1 , respectively.

1,2,4-Triazine↗
DOE OSTI2026

Through‐Plane Conductive Hydrophobic Electrodes for CO 2 Electrolysis to Ethylene

Copper catalyst gas diffusion electrodes (GDEs) have demonstrated unique electrochemical selectivity converting CO 2 to C 2 -hydrocarbons such as ethylene and ethanol but have been challenged by their hydrophobic chemical stability and internal electrical resistance leading to low energy efficiency. Carbon-supported GDEs have low electrical resistance but lack sufficient stability at industrially relevant current densities. While polymer-supported GDEs have improved hydrophobicity, they also display high in-plane electrical resistance, particularly at industrial scales. Here, in this work, we demonstrate a composite gas diffusion layer that combines hydrophobic porous polymers with an electrically conductive backbone addressing these core gas diffusion electrode (GDE) scaling challenges. We investigate the material properties of standalone porous perfluoropolyether (PFPE) polymers, including porosity and surface morphology, under varying processing conditions and then incorporate these polymers into a porous copper foam. This composite enhances the mechanical rigidity necessary for cell assembly and provides a through-plane electrical conduction path to reduce electrical resistive losses. This enhanced PFPE composite GDE displays efficient CO 2 reduction, achieving 15% ethylene energy efficiency at 100 cm 2 . These findings contribute to the development of advanced catalyst materials and electrode architectures and promote scalable strategies for electrochemical conversion of CO 2 into high-value carbon products.

Chemistry↗
DOE OSTI2021

Noncovalent Immobilization of Pentamethylcyclopentadienyl Iridium Complexes on Ordered Mesoporous Carbon for Electrocatalytic Water Oxidation

The attachment of molecular catalysts to conductive supports for the preparation of solid-state anodes is important for the development of devices for electrocatalytic water oxidation. The preparation and characterization of three molecular cyclopentadienyl iridium(III) complexes, Cp*Ir(1-pyrenyl(2-pyridyl)ethanolate-κO,κN)Cl (1) (Cp* = pentamethylcyclopentadienyl), Cp*Ir(diphenyl(2-pyridyl)methanolate-κO,κN)Cl (2), and [Cp*Ir(4-(1-pyrenyl)-2,2'-bipyridine)Cl]Cl (3), as precursors for electrochemical water oxidation catalysts, are reported. These complexes contain aromatic groups that can be attached via noncovalent π-stacking to ordered mesoporous carbon (OMC). The resulting iridium-based OMC materials (Ir-1, Ir-2, and Ir-3) were tested for electrocatalytic water oxidation leading to turnover frequencies (TOFs) of 0.9–1.6 s -1 at an overpotential of 300 mV under acidic conditions. The stability of the materials is demonstrated by electrochemical cycling and X-ray absorption spectroscopy analysis before and after catalysis. Theoretical studies on the interactions between the molecular complexes and the OMC support provide insight onto the noncovalent binding and are in agreement with the experimental loadings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Facile Synthesis of Rhodium‐Based Nanocrystals in a Metastable Phase and Evaluation of Their Thermal and Catalytic Properties

Abstract Controlling the polymorphism of metal nanocrystals is a promising strategy for enhancing properties and discovering new phenomena. However, previous studies on Rh nanocrystals have focused on their thermodynamically stable face‐centered‐cubic (fcc) phase. Herein, a facile synthesis of Rh‐based nanocrystals featuring the metastable hexagonal close‐packed (hcp) phase is reported by using Ru seeds in their native hcp phase to template the deposition of Rh atoms. The success of such phase‐controlled synthesis relies on the templating effect promoted by the small lattice mismatch between Ru and Rh and the slow dropwise titration of the precursor at an elevated temperature, ensuring the layer‐by‐layer growth mode and thus the formation of a conformal hcp‐Rh shell. Faster injection rate of Rh(III) precursor leads to the formation of a rough Rh shell in the conventional fcc phase due to accelerated reaction kinetics. Considering both thermodynamic and kinetic aspects of this system, the hcp‐Rh phase is favored when the low surface energy from smooth overlayers balances the high bulk energy of the metastable phase, achieved through tight control of reaction rates and deposition patterns. These Ru hcp @Rh hcp core–shell nanocrystals demonstrate thermal stability up to 400 °C, while exhibiting higher catalytic activity toward ethanol oxidation reaction compared to Ru hcp @Rh fcc counterparts.

Nguyen, Quynh N.↗
DOE OSTI2021

CRISPR-Cas Genome Editing in the Cellulolytic Bacterium Clostridium thermocellum (C. thermocellum)

Clostridium thermocellum is an anaerobic thermophile that can efficiently degrade lignocellulosic biomass and directly convert it into value-added products such as ethanol. The cellulolytic and ethanologenic capabilities of C. thermocellum make it an excellent candidate for consolidated bioprocessing (CBP) for industrial production, where biomass degradation and fermentation occur simultaneously. In this organism, strain development for effective CBP has traditionally been hindered by the lack of genetic tools. Here, we detail our efficient two-step CRISPR-Cas genome editing protocol for C. thermocellum, using both the native Type I-B CRISPR-Cas system and an exogenous Type-II CRISPR system from Geobacillus stearothermophilus. As recombination is limiting in C. thermocellum genome engineering, we highlight effective thermophilic recombinases necessary to improve genome editing in these systems. We additionally provide design rules for the repair template and synthetic guide RNA (gRNA) for each system. Using these newly developed CRISPR and recombineering tools, targeted C. thermocellum engineering will substantiate efforts toward CBP strain development in industrial applications.

anaerobe↗
DOE OSTI2020

Deconstruction of plant biomass by a Cellulomonas strain isolated from an ultra-basic (lignin-stripping) spring

Plant material falling into the ultra-basic (pH 11.5-11.9) springs within The Cedars, an actively serpentinizing site in Sonoma County, California, is subject to conditions that mimic the industrial pretreatment of lignocellulosic biomass for biofuel production. In this research, we sought to obtain hemicellulolytic/cellulolytic bacteria from The Cedars springs that are capable of withstanding the extreme alkaline conditions wherein calcium hydroxide-rich water removes lignin, making cell wall polysaccharides more accessible to microorganisms and their enzymes. We enriched for such bacteria by adding plant debris from the springs into a synthetic alkaline medium with ground tissue of the biofuel crop switchgrass (Panicum virgatum L.) as the sole source of carbon. From the enrichment culture we isolated the facultative anaerobic bacterium Cellulomonas sp. strain FA1 (NBRC 114238), which tolerates high pH and catabolizes the major plant cell wall-associated polysaccharides cellulose, pectin, and hemicellulose. Strain FA1 in monoculture colonized the plant material and degraded switchgrass at a faster rate than the community from which it was derived. Cells of strain FA1 could be acclimated through subculturing to grow at a maximal concentration of 13.4% ethanol. A strain FA1-encoded β-1, 4-endoxylanase expressed in E. coli was active at a broad pH range, displaying near maximal activity at pH 6-9. Discovery of this bacterium illustrates the value of extreme alkaline springs in the search for microorganisms with potential for consolidated bioprocessing of plant biomass to biofuels and other valuable bio-inspired products.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Synergistic extraction of rare earth elements, actinium, americium, and barium with TTA and Pb resin from acetate buffer solutions

The uptake behavior of 88 Y, 140 Ba, 140 La, 141 Ce, 152 Eu, 228 Ac, and 241 Am was studied with batch uptake, kinetics and column studies in a synergistic extraction system with Pb resin and 2-thenoyltrifuoroacetone in acetate-ethanol solutions. The k' values are very high (>10,000) at near neutral pH (~5 to 6) for all of the radioisotopes studied. The kinetics are reasonably fast for column separations, though the uptake rate is dependent on the concentration of 2-thenoyltrifuoroacetone. Column studies were performed to demonstrate the separation of the trivalent actinides and lanthanides from barium and common fssion products ( 99 Mo, 103 Ru).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Activity of Brønsted Acid Sites in UiO-66 for Cyclohexanol Dehydration

Brønsted-acid sites are introduced via –OSO 3 H groups on the coordinatively unsaturated ZrO 2 nodes of UiO-66 metal organic frameworks (MOF). Such groups create strong Brønsted acidic sites that are active for cyclohexanol and ethanol dehydration (in liquid organic phase and gas phase, respectively). The intrinsic activity of Brønsted acid sites at nodes increased by increasing the concentration of sulfur, which is attributed to a shift from isolated µ 3 -OSO 3 H to two groups [(µ 3 -OSO 3 H) 2 ] interacting via hy-drogen bonding. For cyclohexanol dehydration, the relatively low activation enthalpies and negative transition entropies point to an E2 elimination mechanism, similar to dehydration with MFI zeolites in organic solvents. Furthermore, our results, show that the catalytic activity can be manipulated via the functionalization of zirconia nodes of the MOF framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reductive catalytic fractionation of cotton stalks: catalytic strategy for tuning the selectivity of phenolic monomers

Pretreatment of lignocellulosic biomass is a primary step to delink lignin from the lignin-carbohydrate complex for bioethanol production and other value-added products. Presently, these processes yield lignin (technical) with significant structural changes compared to native lignin and make it difficult to valorize. Reductive catalytic fractionation (RCF) is an advanced pretreatment process to valorize native lignin to selective phenolic monomers before capitalizing on carbohydrates. Herein, cotton stalks (CS) were pretreated with ethanol: water mixture catalyzed by bimetallic, Ru-Ni/HY (RNY) and Ru-Fe/HY (RFY), and trimetallic, Ru-Fe-Ni/HY (RFNY), catalysts using the endogenously produced H 2 . The favorable catalytic properties of the RFNY catalyst, including high reducibility, acidity, metal dispersion, the synergistic effect of all the metals, and appropriate pore and particle size resulted in the highest catalytic activity. Maximum 92% delignification efficiency was achieved with 91% holocellulose retention. The extracted lignin after depolymerization in the same step produced a 19 wt.% yield of phenolic monomers. Increasing the duration of the reaction from 2 to 6 h increased the selectivity to saturated alkyl chain phenolics (1 to 16 wt.%) at the expense of hemicellulose (50 to 9%). The fate of carbohydrates left behind after the RCF (CS-RCF) process was analyzed through enzymatic saccharification and compared with raw CS and acid-pretreated CS. In conclusion, CS-RCF yielded maximum glucose yield (45 g/L) within an incubation period of 72 h.

09 BIOMASS FUELS↗
DOE OSTI2020

Template-free fabrication of fractal porous Y 2 O 3 monolithic foam and its functional modification by Ni-doping

Fractal structures which display nearly the same character at every scale exist widely in nature, however, it is still a great challenge to fabricate a fractal nanostructure. Herein, a Y 2 O 3 monolith with unique hierarchically fractal porous structure was fabricated via calcination of a fractal porous coordination polymer precursor. The monolith exhibits porous feature with the pore-size ranging from micrometers to nanometers. Interestingly, each level of the pore-wall is composed of secondary porous structures, whose pore-wall is composed of sub-level self-similar porous feature. Moreover, by Ni-doping in the coordination polymer precursor, fractal porous Ni@Y 2 O 3 was prepared, and exhibited enhanced activity in ethanol steam reforming compared with that of a common supported NiO catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lignin-based carbon quantum dots with high fluorescence performance prepared by supercritical catalysis and solvothermal treatment for tumor-targeted labeling

The poor fluorescence performance of lignin-based carbon quantum dots (L-CQDs) prepared using the bottom-up method has hindered their development. Here, in this study, a two-step strategy was proposed to efficiently enhance the fluorescence properties of L-CQDs. Lignin was first cracked using an ethanol supercritical/noble metal catalyst; then, the L-CQDs were prepared with the cracked lignin fragments as carbon precursors without adding any modified reagents. Compared with the OL-CQDs prepared by the traditional one-pot hydrothermal method, the L-CQDs-1 prepared from CL-1 containing much low molecular weight compounds, and have photoluminescence (increased from 63 to 975) and excellent up-conversion photoluminescence (enhanced by 16.3 to 963), which significantly enhanced by about 15 times and 60 times, respectively. They can emit bright blue fluorescence under both ultraviolet and near-infrared light irradiation owing to a large amount of surface defects caused by the rich compound composition. When L-CQDs-1 were combined with, and quenched by folic acid (FA), the prepared FA@L-CQDs-1 show the ability to target and label tumor cells. This study opens new avenues for the preparation of L-CQDs with high fluorescence performance using lignocellulosic material without heteroatom additives.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Cultivating clarity: understanding the impact of land cost assumptions on biofuel viability

The transition to sustainable energy has increased interest in biofuel production to reduce greenhouse gas emissions, decrease reliance on imported oil, and ensure energy resilience. Here, this study examines the often-overlooked impact of land cost assumptions on the economic viability of biofuel production. Using a discounted cash flow techno-economic framework, we evaluated three land cost scenarios—no land costs, land rental costs, and land purchase costs—across six bioenergy feedstocks (corn, soybeans, switchgrass, miscanthus, poplar, and microalgae) and three biofuel products (corn ethanol, soybean biodiesel, and sustainable aviation fuel) at the county level for the contiguous United States. The analysis reveals substantial variation in minimum fuel selling prices due to these scenarios. High-yield crops like algae showed low sensitivity to land costs, while low-yield crops such as soybeans were highly sensitive. Geographical differences were significant, with minimum fuel selling price increases most pronounced in high-value land regions like the Corn Belt. Case studies further illustrate the influence of local productivity and land costs on economic outcomes across the United States. These findings emphasize the importance of maintaining consistent land cost assumptions in biofuel economic assessments. By quantifying the interplay between land value, crop productivity, and economic feasibility, this study provides essential insights for policymakers and stakeholders to advance sustainable energy solutions.

09 BIOMASS FUELS↗
DOE OSTI2021

Production of Biofuels from Biomass by Fungi

The use of abundantly available lignocellulosic biomass as a feedstock for biofuels has emerged as a sustainable alternative to fossil fuels. Industries across the world have shifted their focus to enhancing bioconversion through fungi, efficient and tractable organisms capable of producing valuable cost-effective enzymes. The many capabilities of fungal species offer opportunities for the tailored production of valuable compounds from a variety of substrates. This review details a high level examination of how fungal enzymes degrade plant polysaccharides to simple sugars through the sensitive coordination of transcription factors. Scientists have used a variety of tools like genetically engineering fungi, combining various species, and altering industrial/process conditions to enhance biomass deconstruction and fermentation while solving obstacles like inhibitory compounds. While ethanol and biodiesel are highlighted, additional biofuels are mentioned. These advances have uncovered themes like synergism and biocatalysis, led to the discovery of new fungal species, and revealed unique enzymatic mechanisms. Notably, this research highlights the complexity of metabolic systems within and between fungi. Fungi have been indispensable to the biofuel industry and future research will be crucial for energy sustainability.

Ottum, Eva MN↗
DOE OSTI2025

Catalytic hydrogenation of HMF to BHMF over copper catalysts

2,5-Bis(hydroxymethyl)furan (BHMF) is a bio-derived building block for polyester production, obtained via the hydrogenation of 5-hydroxymethylfurfural (HMF). First-principles thermodynamic equilibrium calculations indicate that this reaction is not thermodynamically limited under relevant conditions (e.g., 100 °C and high H 2 partial pressure). In this work, crude HMF was employed as the feedstock for BHMF synthesis. Initially, acidic impurities and humins were removed from unrefined HMF through filtration using a packed bed of γ-alumina. A comprehensive study of the filtration process is presented, including filtration kinetics, breakthrough curve analysis, and mathematical modeling. The purified HMF was subsequently hydrogenated over a 10 wt% CuZrO 2 catalyst, using ethanol as the reaction solvent. Batch reactions were first performed for collection of kinetic data to guide the transition to continuous flow operation. Kinetic data was collected in a fixed bed reactor at varying contact time, time on stream, temperature, and HMF concentration. This data was used to develop a kinetic model for HMF hydrogenation. Maximum BHMF production rates were achieved at 130 °C, accompanied by minor formation of byproducts from BHMF ring-opening reactions. The BHMF selectivity was 100 % at 100 °C although with lower reaction rates. Furthermore, catalyst stability tests revealed a loss of up to 50 % in catalytic activity within the first 24 h, likely due to the adsorption of HMF-derived oligomers that are not easily removed by filtration.

Crude HMF filtration↗