Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environmental impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Development of electrostatic precipitator (ESP) technology to remove elemental mercury vapor, HG(0)

The presence of mercury vapor or other forms of mercury presents issues with worker safety, decommissioning facilities, and environmental impacts. As such, it is desired to develop a strategy to either remove or reduce mercury levels in Oak Ridge’s Y-12 Complex facilities. A testing methodology was developed to evaluate electrostatic precipitator technology for removal of mercury vapor. This methodology involved supplying mercury vapor-containing air to the ESP device by flowing air through a column containing alternating layers of sand and liquid mercury droplets. Initial attempts at quantifying the efficacy of the ESP device in removing mercury vapor were plagued with difficulties in controlling the flow of mercury into the ESP device due to poor performance of the generator column and the contamination of these experiments with mercury from an unknown source. These issues were resolved by creating a new generator column with slower air velocity and higher surface area of liquid mercury, along with moving the air intake for the ESP device to outside of the chemical hood in which testing took place. This resulted in a steady, quantified flow of mercury vapor from the generator column and no observation of unintended mercury sources. A final test of the ESP device under these controlled conditions showed that for a certain amount of time (on the order of 20-30 minutes) mercury concentrations were reduced by approximately 33 - 67% of the inlet concentration. However, episodic releases or pulses of mercury observed only at the outlet indicated that the mercury accumulated in the ESP device is periodically expelled. As a result, it was not deemed to be an efficient strategy for the removal of elemental mercury vapor.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Performance Solvent for NGCC Flue Gas CO 2 Capture (Final Technical Report)

Amine-based solvent absorption is the most mature and reliable technology for large scale CO 2 capture, dating back to the 1930s when monoethanolamine (MEA) was used to treat acid gases from oil refineries. However, while strategic advancements have optimized the CO2 capture process, the cost of capture remains high, where current estimates suggest that CO 2 capture costs are around $\$$72/tonne of CO 2 . To address this, solvent development and optimization have become a focus of current research. This project sought to develop a high-performance solvent to reduce the overall cost of CO 2 capture from NGCC flue gas. Here, solvent optimization focused on: (1) reducing the energy required for CO 2 desorption in a reboiler, (2) improving CO 2 absorption and desorption reaction kinetics, (3) improving solvent stability, and (4) reducing environmental impacts. Susteon has developed and evaluated a promoted solvent, Sustenol™, for NGCC flue gas CO 2 capture. The optimized Sustenol™ also shows a higher dynamic CO 2 absorption capacity of ~0.5 mol CO2 /mol amine compared to 0.25 mol CO2 /mol amine for 30 wt% MEA. Additionally, the solvent is oxidatively, thermally and hydrothermally stable, which leads to lower solvent loss and emissions. These advancements have resulted in a solvent regeneration energy of 2.16 GJ/tonne of CO 2 which is >30% lower than current state-of-the-art commercial and emerging solvents. Combined with empirical data from the bench and pilot scale testing, this preliminary TEA study indicated the cost of CO 2 capture by Sustenol™ for 97% CO 2 removal at $\$$54/tonne and for 90% removal at $\$$49/tonne, with a pathway to achieve $\$$45/tonne of CO 2 with continued process and solvent advancements. Susteon has developed a technology roadmap to reduce the cost of CO 2 capture to <$\$$45/tonne for NGCC flue gas. Susteon plans to derisk this technology for commercial deployment through comprehensive solvent degradation testing, long-term testing in a pilot plant at 5 tonne CO2 /day and demonstration scale testing at 100 tonne CO2 /day with NGCC flue gas and engineering design studies to qualify Sustenol™ as a drop-in replacement solvent.

03 NATURAL GAS↗

Voucher Opportunity 5-15: Independent Assessment of Monitoring, Reporting, and Verification (MRV) Technologies and Practices for Enhanced Rock Weathering (CRADA 718) Abstract

Development of robust, transparent, and precise monitoring, reporting, and verification (MRV) technologies and practices is critical for carbon dioxide removal (CDR) project developers to comply with regulatory and permitting requirements, voluntary carbon market (VCM) protocols, and to ensure safety while reducing environmental impacts. Enhanced rock weathering (ERW)-based CDR technologies focus on removing atmospheric carbon through conversion into thermodynamically stable solid or aqueous carbonate forms for permanent storage (i.e., mineralization). This highly durable form of CDR enhances naturally occurring silicate rock weathering cycles by optimizing application of finely-ground silicate rock particles (i.e., from basalt) on terrestrial agricultural lands to accelerate natural silicate rock weathering and mineralization. Enhanced rock weathering may also provide improved crop yields and enhance soil health. A critical aspect for commercialization of these technologies is the development of MRV to quantify the net removal and durable storage of atmospheric CO 2 . For ERW systems, it is essential to accurately characterize the mineral feedstock selected for application to establish the baseline geochemical composition, mineral dissolution rates, and carbon removal potential of the feedstocks to estimate overall net removal. Given the difficulty with conducting MRV for ERW in diverse soil/environment types, over large application areas, and due to complex chemical reaction networks, this project will accelerate understanding towards consensus on best practices for MRV. The overall objectives of the proposed voucher project are to: 1) Characterize and analyze feedstock(s) intended for ERW field application by Lithos Carbon (“Voucher Recipient”/ “CRADA Participant”) to determine overall mineralization potential; 2) Facilitate knowledge transfer and documentation of experimental protocols, instrumentation, and other relevant best practices; and 3) Support the Voucher Recipient’s broader technology commercialization and ERW Research Facility development plans. This work will align with the Voucher Recipient’s MRV plans for field sites and build upon complementary efforts conducted by PNNL on mineralization MRV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Concept of Operations for Management by Trajectory

This document describes Management by Trajectory (MBT), a concept for future air traffic management (ATM) in which every flight operates in accordance with a four-dimensional trajectory (4DT) that is negotiated between the airspace user and the Federal Aviation Administration (FAA) to respect the airspace user's goals while complying with National Airspace System (NAS) constraints. In the present-day NAS, the ATM system attempts to predict the trajectory for each flight based on the approved flight plan and scheduled or controlled departure time. However, once the aircraft starts to move, controllers tactically manage the aircraft to implement traffic management restrictions, separate otherwise conflicting aircraft, and address arising NAS constraints. Tactical controller actions are not directly communicated to the automation systems or other stakeholders. Furthermore, the initial trajectory prediction does not anticipate these disruptions or how they will impact the flight. Consequently, and compounded by gaps in required data and models, trajectory predictions are less accurate than possible, which affects Traffic Flow Management (TFM) performance. A cornerstone of the MBT concept is that all air vehicles have, at all times, an assigned 4DT from their current state to their destination. These assigned trajectories consist of trajectory constraints and descriptions. Pilots and air traffic controllers, with the aid of automation, operate the aircraft to comply with the assigned trajectory, unless first negotiating a revision. Equipped aircraft have substantial responsibility for complying with the assigned trajectory without controller intervention. To maximize the operational flexibility available to the airspace user, the assigned trajectory only imposes trajectory constraints as required to achieve the ATM goals of NAS constraint compliance and aircraft separation. Trajectory descriptions are added to the assigned trajectory to ensure sufficient predictability. To further improve trajectory prediction accuracy, airspace users supplement the assigned trajectory by broadcasting intent information and updating it as necessary. Air vehicle intent is a more detailed description of the airspace user's plan for how the flight will fly the assigned trajectory. Air vehicle intent can change freely, without negotiation, as long as it remains in compliance with the assigned trajectory. Aircraft assigned trajectories, air vehicle intent, and predicted trajectories are shared, creating a common view among stakeholders. A NAS Constraint Service gathers and publishes information about all known NAS constraints, enabling airspace users to be informed participants in trajectory negotiation. Trajectory constraints in the assigned trajectory are mapped to NAS constraints to facilitate identifying which aircraft are affected when NAS constraints change. To support efficient trajectory negotiation, all aircraft provide current information about air vehicle capabilities. Assigned trajectories are constructed to satisfy all known NAS constraints, improving trajectory stability and predictability. Uncertainty and disruptions are handled by modifying the assigned trajectory as far in advance as possible. By proactively negotiating changes to the assigned trajectory, rather than relying on controller-selected tactical actions such as vectors to resolve traffic conflicts or implement miles-in-trail restrictions, MBT keeps aircraft on closed trajectories that are fully known to all stakeholders. Since reactive air traffic control actions cannot be predicted in advance, the downstream trajectory cannot be accurately predicted until they happen. Reliable trajectory predictions allow the system to identify needed modifications to trajectories further in advance, where they can be negotiated and communicated as amendments (i.e., additional or altered trajectory constraints) to the assigned trajectory. Decision Support Tools (DSTs) aid controllers in rapidly defining and communicating closed trajectories to the aircraft and support all stakeholders in trajectory negotiation. Anticipated MBT benefit mechanisms include more accurate trajectory predictions, improved ATM performance and robustness to off-nominal conditions, increased flexibility and operational efficiency, reduced impediments to emerging classes of airspace users accessing NAS resources, reduced environmental impacts, and enhanced safety.

ConOps↗

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flash Recycling of Graphite Anodes

The ever-increasing production of commercial lithium-ion batteries (LIBs) will result in a staggering accumulation of waste when they reach their end of life. A closed-loop solution, with effective recycling of spent LIBs, will lessen both the environmental impacts and economic cost of their use. Presently, <5% of spent LIBs are recycled and the regeneration of graphite anodes has, unfortunately, been mostly overlooked despite the considerable cost of battery-grade graphite. Here, in this work, an ultrafast flash recycling method to regenerate the graphite anode is developed and valuable battery metal resources are recovered. Selective Joule heating is applied for only seconds to efficiently decompose the resistive impurities. The generated inorganic salts, including lithium, cobalt, nickel, and manganese, can be easily recollected from the flashed anode waste using diluted acid, specifically 0.1 M HCl. The flash-recycled anode preserves the graphite structure and is coated with a solid-electrolyte-interphase-derived carbon shell, contributing to high initial specific capacity, superior rate performance, and cycling stability, when compared to anode materials recycled using a high-temperature-calcination method. Life-cycle-analysis relative to current graphite production and recycling methods indicate that flash recycling can significantly reduce the total energy consumption and greenhouse gas emission while turning anode recycling into an economically advantageous process.

36 MATERIALS SCIENCE↗

Review on Perovskite Solar Cells: From Single‐Junction Devices to Tandem Deployment in Space

Perovskite solar cells (PSCs) have emerged as a transformative photovoltaic technology, offering high power conversion efficiency (PCE) and the potential for cost-effective manufacturing. However, stability and large-scale manufacturing remain critical challenges that must be addressed for widespread adoption. This review provides a roadmap from single-junction perovskite solar cells to tandem deployment in space. First, material-level innovations are discussed, including mixed-cation and low-dimensional perovskites, transport materials, and additives that improve thermal and structural stability while enhancing efficiency. Then, we examine both established industrial standards and emerging scientific protocols aimed at stabilizing PSCs under operational conditions, including tandem cell integration strategies and encapsulation techniques to mitigate performance degradation. Manufacturing scalability is a focal point, where deposition methods and green solvents are explored to improve large-area film uniformity and reduce environmental impact. Additionally, the increasing viability of PSCs in extraterrestrial environments is assessed, with emphasis on their performance in space applications, radiation resistance, and flexible lamination methods for deployment in extreme conditions. Progress across materials innovation, device architectures, stability testing protocols, and both terrestrial and extraterrestrial applications collectively drives perovskite photovoltaics toward higher efficiency, stability, and cost-effectiveness.

flexible PSCs↗

Flux Upcycling of Degraded Layered Cathodes to LiNi x Mn y Co z O 2 (NMCs) with Gradient Transition Metal Distribution

The rising demand for lithium-ion batteries (LIBs) has intensified the need for efficient recycling methods to address both supply chain constraints and environmental impacts. Direct upcycling, distinguished by its ability to achieve both the structural and compositional integrity of cathode materials, has gained prominence as a sustainable alternative to conventional pyrometallurgical and hydrometallurgical processes. However, the current direct upcycling methods are typically limited by incorporating Li and/or Ni, significantly constraining the adaptability across diverse LiNi x Mn y Co z O 2 (NMCs). Here, in this study, a versatile molten salt approach is reported that expands the scope of direct upcycling by enabling simultaneous incorporation of Li, Ni, and Mn. This methodology facilitates flexible conversion among diverse NMC compositions, including non-stoichiometric Co/Mn systems such as upcycling degraded LiCoO 2 (D-LCO), LiNi 1/3 Mn 1/3 Co 1/3 O 2 (D-NMC111), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (D-NMC811) to surface Mn enriched NMC111, LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), and NMC811, respectively. The gradient transition metal distribution in upcycled products, characterized by Mn-enriched outer layers and Co/Ni-enriched cores enhances the interfacial stability of NMC cathodes, addressing critical challenges in long-term performance and structural integrity. These results highlight the potential of flux methods for advancing the upcycling of spent cathodes and producing high-performance materials for next-generation LIBs applications.

lithium -ion batteries↗

Methane flux measurements in rice by static flux chamber and eddy covariance

Abstract Understanding methane (CH 4 ) fluxes from rice ( Oryza sativa L.) at the field scale is paramount to reducing environmental impacts while ensuring global food security. Greenhouse gas (GHG) measurements at the plot scale using static flux chambers (SFC) have long informed the understanding of flux dynamics and have largely been the basis of global flux estimates. However, in many parts of the world, the landscapes where agricultural fluxes are generated come from larger fields. Eddy covariance (EC) can measure trace gases on larger fields, but there are few studies available quantifying CH 4 emissions under typical practices at a field scale. Furthermore, few of these studies are from the U.S. Midsouth, the largest producer of U.S. rice. This study compares and quantifies field‐scale SFC and EC flux measurements on a large commercial system in northeastern Arkansas during the 2015 and 2016 growing seasons, following typical producer practices. Daily measured SFC CH 4 fluxes did not differ from EC‐daily CH 4 fluxes ( p = .108). Total season CH 4 emissions, calculated as the sum of daily fluxes ranged from 50 to 156 kg CH 4 ha −1 season −1 , with SFC reporting greater emissions than EC. Although SFC and EC‐daily flux measurements were similar early ( p = .382) and late ( p = .543) in the season, they differed mid‐season ( p < .001) with SFC consistently reporting greater fluxes than EC. The findings of this study help unify season long plot‐scale and field‐scale flux measurements and signify an advancement of our understanding of GHG fluxes from rice systems.

Reba, Michele L.↗

Enhancing Operational Performance and Productivity Benefits in Breweries through Smart Manufacturing Technologies

This article uses case studies to demonstrate the potential of smart manufacturing (SM) and Internet of Things (IoT) technologies to enhance operational performance and productivity in industry. The analysis highlights benefits such as cost reduction, production flexibility, shorter product time-to-market, energy/water efficiency and environmental impact reduction, and increased productivity. To illustrate the effectiveness of SM and IoT approaches, the authors sought out manufacturers currently implementing or seeking to implement SM and IoT technologies. The authors identified beer brewing (NAICS Code 312120) as a rapidly expanding industry whose members appear eager to implement SM technologies to optimize production lines by revealing bottlenecks and identifying performance-reducing nodes. This article presents two case studies based on SM and IoT technologies in breweries. It briefly describes a systematic framework introduced elsewhere by the authors and uses it to assess the energy productivity and competitiveness of SM applications in breweries. This article addresses questions concerning the information and communications technology infrastructure needed to build smart breweries and how corporations simplify the installation and deployment of SM and IoT components. This article was originally published in the Proceedings of the 2019 ACEEE Summer Study on Energy Efficiency in Industry.

42 ENGINEERING↗

A machine learning approach for clinker quality prediction and nonlinear model predictive control design for a rotary cement kiln

Abstract Cement manufacturing is energy‐intensive (5Gj/t) and comprises a significant portion of the energy footprint of concrete systems. Incorporating modern monitoring, simulation and control systems will allow lower energy use, lower environmental impact, and lower costs of this widely used construction material. One of the goals of the CESMII roadmap project on the Smart Manufacturing of Cement included developing an analytical process model for clinker quality that includes the chemistry of the kiln feed and accounts for critical process variables. This predictive model will be used in nonlinear model predictive control system designed to significantly reduce process energy use while maintaining or improving product quality. In the cement manufacturing plant used in this study, the kiln feed (meal) is tested every 12 h and used to estimate the mineral composition of the cement kiln output (clinker) using the stoichiometry‐based Bogue's model and the expertise of the plant operators. During kiln operation, kiln output (clinker) is sampled and tested every 2 h to measure its chemical and mineral composition. The predicted and measured values of the clinker composition are used by the plant operators to adjust the kiln input stream and the production process characteristics to maintain stable operation and uniform product quality. However, the time delay between prediction and testing, along with inaccuracies inherent in the Bogue's model have made any process changes designed to minimize energy use problematic, especially in‐light of potential clinker quality issues that process changes often pose. A new analytical model that integrates quality information and process operation information has been developed from data collected from 2 years of production from an operating cement facility. To make the model fuel‐type‐independent, consumed heat energy was computed in the model instead of fuel type and amount. A Feedforward Network was trained and tailored from collected data. Many data‐based simulations were conducted to quantitatively evaluate the proposed model and the 5‐fold cross‐validation procedure was used to test the models. The resulting predictive model was shown to have a low root mean square error (MSE) with respect to the estimated clinker mineral composition compared to that using the industry standard “Bogue’ model”. The end goal of this work was to develop a single machine learning tool that allows the use of quality control data and process control variables to improve energy efficiency of the process in a continuous fashion. The proposed nonlinear model predictive control system (NMPC) can generate predicted kiln production characteristics based on manipulated variables in manner that accurately follows the target product quality values. Simulation results also show that the proposed model produced accurate predictions of kiln outputs that fell within the required constraints, while manipulating control variables within typical operational ranges.

Ali, Asem M.↗

BRE‐X Emissions Database for End‐of‐Life Scenarios of Selective Building Construction Materials to Enable Circular Economy in Construction

In the United States, construction and demolition debris predominately end up in landfills with minimal end‐of‐life Re‐X (recover, recycle, reuse, etc.) scenarios, resulting in large environmental impacts and lost opportunities for material recovery. Except for concrete and metals, which seem to have a few well‐defined end‐of‐life pathways, there seems to be a lack of well‐documented end‐of‐life scenarios for other construction materials, let alone their emissions data. Hence, there is a need for documented end‐of‐life Re‐X scenarios and end‐of‐life data of more building materials to motivate widespread use of Re‐X strategies in building design. This paper outlines the efforts of the National Renewable Energy Laboratory, Carbon Leadership Forum, Building Transparency, and Skidmore, Owings & Merrill to (a) create an open‐access BRE‐X (Building Re‐X) end‐of‐life emissions database consisting of greenhouse gas emissions data associated with various end‐of‐life scenarios for a select list of high‐impact building construction materials, and (b) integrate the BRE‐X end‐of‐life emissions database with CAD/BIM/LCA tools for evaluating various end‐of‐life scenarios. The paper also presents a few existing life cycle inventory databases that contain sparse amounts of end‐of‐life data for a few construction materials and their limitations in terms of scaling and data consolidation. Finally, a sample of how the collected data can be ingested into whole‐building LCA tools using open data formats and a public access link to the BRE‐X end‐of‐life emissions database is also included.

36 MATERIALS SCIENCE↗

Simulating competition in the US bioeconomy to produce hard‐to‐electrify transportation fuels using limited biomass resources

This study presents a novel bioeconomy optimization framework, BiOpt, designed to address critical questions regarding the strategic use of limited US biomass resources for biofuel production. By integrating detailed techno-economic analyses, life cycle assessments, and resource assessment data, BiOpt optimizes resource distributions across competing technologies to maximize economic performance and/or minimize greenhouse gas emissions. Using feedstock scenarios from the 2023 Billion Ton Study, the analysis explores optimal biomass allocations across sustainable aviation fuel, diesel, and marine biofuel conversion pathways given varying production targets and policy incentives. Results demonstrate distinct feedstock preferences and pathway utilizations when prioritizing economic returns vs. emissions reductions. For instance, fats, oils, and greases were highly favored in cost-optimized scenarios, while low-carbon feedstocks such as wet waste dominated greenhouse gas-minimized strategies. The findings underscore the pivotal role of policy incentives and technological advances in shaping biofuel supply chains and provide actionable insights for scaling sustainable biofuel production to decarbonize hard-to-electrify sectors. This framework offers a robust tool for policymakers and stakeholders to evaluate biofuel strategies that balance energy output, economic viability, and environmental impact.

09 BIOMASS FUELS↗

Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance

The energy efficiency, mechanical durability, and environmental compatibility of all moving machine components rely heavily on advanced lubricants for smooth and safe operation. Herein an alternative family of high-quality liquid (HQL) lubricants was derived by the catalytic conversion of pre- and post-consumer polyolefin waste. The plastic-derived lubricants performed comparably to synthetic base oils such as polyalphaolefins (PAOs), both with a wear scar volume (WSV) of 7.5×10 -5 mm -3 . HQLs also performed superior to petroleum-based lubricants such as Group III mineral oil with a WSV of 1.7×10 -4 mm -3 , showcasing a 44% reduction in wear. Furthermore, a synergistic reduction in friction and wear was observed when combining the upcycled plastic lubricant with synthetic oils. Additionally, life cycle and techno-economic analyses also showed this process to be energetically efficient and economically feasible. This novel technology offers a cost-effective opportunity to reduce the harmful environmental impact of plastic waste on our planet and to save energy through reduction of friction and wear-related degradations in transportation applications akin to synthetic oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emerging Rare Earth Element Separation Technologies

Rare earth elements are essential for numerous clean energy applications, yet their mining, separation, and processing pose significant environmental challenges. Traditional separation processes often result in ecological damage, highlighting the critical need for innovative techniques that reduce environmental impacts. This article reviews recent advancements in rare earth separation technologies, with a particular focus on the role of neutral organic compounds. It explores how these compounds change selectivity across the rare earth series, offering promising strategies for designing more effective rare earth element separation systems. Furthermore, the article points out research areas requiring additional investigation to improve the sustainability of these critical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective Communication of Energy Science and Technology

Although research, development, and deployment of advanced energy technologies are essential for the clean energy transition, communication about these technologies is equally important to their success. Energy is part of everyday life; therefore, changes in energy systems should be accepted by communities and industries. Yet details about energy generation, transmission, and environmental impacts are complex. The combination of commonality and complexity requires communications to use visualization, localization, narrative, and understandable terminology to reach a range of stakeholders. Collaboration between technology experts and communications professionals builds integrity and accessibility of energy information that enables community-based solutions for energy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Current Challenges in Efficient Lithium‐Ion Batteries’ Recycling: A Perspective

Abstract Li‐ion battery (LIB) recycling has become an urgent need with rapid prospering of the electric vehicle (EV) industry, which has caused a shortage of material resources and led to an increasing amount of retired batteries. However, the global LIB recycling effort is hampered by various factors such as insufficient logistics, regulation, and technology readiness. Here, the challenges associated with LIB recycling and their possible solutions are summarized. Different aspects such as recycling/upcycling techniques, worldwide government policies, and the economic and environmental impacts are discussed, along with some practical suggestions to overcome these challenges for a promising circular economy for LIB materials. Some potential strategies are proposed to convert such challenges into opportunities to maintain the global expansion of the EV and other LIB‐dependent industries.

25 ENERGY STORAGE↗

Phosphorus budgets of intensively managed row crops at a long–term agroecosystem research site in the upper US Midwest

Phosphorus (P) budgets for cropping systems provide insights for keeping soil P at optimal levels for crops while avoiding excess inputs. We quantified 12 years of P inputs (fertilizer and atmospheric deposition) and outputs (harvest and leaching losses) for replicated maize (Zea mays L.)—soybean (Glycine max L.)—wheat (Triticum aestivum) crop rotations under conventional, no-till, reduced input, and biologically based (organic without compost or manure) management systems at the Kellogg Biological Station LTAR site in southwest Michigan. Conventional, no-till, and reduced input systems were fertilized between 13 and 50 kg P ha –1 depending on year. Soil test phosphorus (STP) was measured at 0- to 25-cm depth every autumn. Leached P was measured as dissolved P in the soil solution sampled beneath the rooting depth and combined with modeled percolation. Fertilization and harvest were the predominant P fluxes in the fertilized systems, whereas only harvest dominated P flux in the unfertilized organic system. Leaching losses were minor terms in the budgets, but leachate concentrations were nevertheless close to the range of concern for downstream eutrophication. Over the 12-year study period, the organic system exhibited a negative P balance (–82.0 kg P ha –1 ), coinciding with suboptimal STP levels, suggesting a need for P supplementation. In contrast, the fertilized systems showed positive P balances (mean: 70.1 kg P ha –1 ) with STP levels well above agronomic optima. Results underscore the importance of tailored P management strategies to sustain crop productivity while mitigating environmental impacts.

60 APPLIED LIFE SCIENCES↗