Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Vacancy defect control of colossal thermopower in FeSb2

Abstract Iron diantimonide is a material with the highest known thermoelectric power. By combining scanning transmission electron microscopic study with electronic transport neutron, X-ray scattering, and first principle calculation, we identify atomic defects that control colossal thermopower magnitude and nanoprecipitate clusters with Sb vacancy ordering, which induce additional phonon scattering and substantially reduce thermal conductivity. Defects are found to cause rather weak but important monoclinic distortion of the unit cell P n n m → P m . The absence of Sb along [010] for high defect concentration forms conducting path due to Fe d orbital overlap. The connection between atomic defect anisotropy and colossal thermopower in FeSb 2 paves the way for the understanding and tailoring of giant thermopower in related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Momentum space AC Josephson effect and intervalley coherence in multilayer graphene

Electron transport driven by the phase coherence and interference of quantum many-body wavefunctions is a fascinating phenomenon with potential technological significance. Superconductivity, for example, enables dissipationless transport through macroscopic phase twisting, while charge-density waves show broadband noise and AC-DC interference once their phase is depinned. We identify an analogous phase-coherent dynamics in the intervalley-coherent (IVC) state frequently observed in rhombohedral multilayer graphene. We show that a static magnetic field drives an oscillating intervalley current, which produces an oscillating orbital magnetization and thereby a detectable AC Hall response. This mechanism is similar to the Josephson effect observed in superconductors but now happening in momentum space. In this analogy, the static magnetic field acts as the DC voltage, while the oscillating intervalley current is the AC Josephson current. We provide microscopic calculations of all the phase-number free-energy parameters in rhombohedral trilayer graphene, establishing this effect as an experimental signature of IVC order.

electronic properties and materials↗
DOE OSTI2020

Water stable molecular n-doping produces organic electrochemical transistors with high transconductance and record stability

From established to emergent technologies, doping plays a crucial role in all semiconducting devices. Doping could, theoretically, be an excellent technique for improving repressively low transconductances in n-type organic electrochemical transistors – critical for advancing logic circuits for bioelectronic and neuromorphic technologies. However, the technical challenge is extreme: n-doped polymers are unstable in electrochemical transistor operating environments, air and water (electrolyte). Here, the first demonstration of doping in electron transporting organic electrochemical transistors is reported. The ammonium salt tetra-n-butylammonium fluoride is simply admixed with the conjugated polymer poly(N,N’-bis(7-glycol)-naphthalene-1,4,5,8-bis(dicarboximide)-co-2,2’-bithiophene-co-N,N’-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide), and found to act as a simultaneous molecular dopant and morphology-additive. The combined effects enhance the n-type transconductance with improved channel capacitance and mobility. Furthermore, operational and shelf-life stability measurements showcase the first example of water-stable n-doping in a polymer. Overall, the results set a precedent for doping/additives to impact organic electrochemical transistors as powerfully as they have in other semiconducting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

One Structure, Two Elements—LuGe 2 Superconductor vs Ordinary Metallic Conductor LuSn 2 . A Case Study on How Site-Selective Germanium for Tin Atom Substitution Leads to Modulating of the Charge Distribution

The substitution of chemically similar elements in a given crystal structure is an effective way to enhance physical properties, but the understanding on such improvements is usually impeded because the substitutions are random, and the roles of the different atoms cannot be distinguished by crystallographic symmetry. Herein, we provide a detailed crystallographic analysis and property measurements for the continuous solid solutions LuGe x Sn 2–x (0 < x < 2). The results show that there is no apparent change of the global symmetry, with the end-members LuGe 2 and LuSn 2 , as well as the intermediate LuGe x Sn 2–x compositions adopting the ZrSi 2 type structure (space group Cmcm, Pearson index oC12). Yet, the refinements of the crystal structures from single-crystal X-ray diffraction data show that Ge–Sn atom substitutions are not random, but occur preferentially at the zig-zag chain. The patterned distribution of two group 14 elements leads to a significant variation in chemical bonding and charge ordering within the other structural fragment, the 2D square nets, thereby resulting in tuned electron transport. The enhancement is greater than the typical Bloch-Gruneisen model, and more akin to the parallel-resistor model. Magnetization measurements on single crystals show bulk superconductivity in all LuGe x Sn 2–x samples with shielding fractions as high as 90%. Specific heat data confirm the effect to originate from residual metallic tin in the material, indicating that Sn atom substitutions in the 2D square nets cause disruptions of the hypervalent bonding and local anisotropy, which ultimately leads to vanishing of the superconducting state in the end-member LuGe 2 . This work sheds light on how the complexity in chemical interactions by two different carbon congeners leads to changes in the physical properties and how they can be correlated with the induced charge distribution. Furthermore, these studies also provide a general approach to modulation of charge density, and thus, of emerging physical properties in other classes of intermetallic systems based on the main-group elements of groups 13 to 15.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Regulating surface potential maximizes voltage in all-perovskite tandems

The open circuit voltage (V OC ) deficit in perovskite solar cells (PSCs) is greater in wide bandgap (>1.7 eV) cells than in ~1.5 eV perovskites. Quasi-Fermi level splitting (QFLS) measurements reveal V OC -limiting recombination at the electron transport layer (ETL) contact. This, we find, stems from inhomogeneous surface potential and poor perovskite-ETL energetic alignment. Common monoammonium surface treatments fail to address this; instead we introduce diammonium molecules to modify the perovskite surface states and achieve a more uniform spatial distribution of surface potential. Using 1,3-propane diammonium (PDA), QFLS increases by 90 meV, enabling 1.79 eV PSCs with a certified 1.33 V V OC , and > 19% power conversion efficiency (PCE). Incorporating this layer into a monolithic all-perovskite tandem, we report a record V OC of 2.19 V (89% of the Detailed Balance V OC limit) and > 27% PCE (26.3% certified quasi-steady-state). Furthermore, these tandems retain more than 86% of their initial PCE after 500 hrs operation.

14 SOLAR ENERGY↗
DOE OSTI2023

Spin polarization through axially chiral linkers: Length dependence and correlation with the dissymmetry factor

Abstract The chiral‐induced spin selectivity (CISS) effect relates to the spin‐selective electron transport through chiral molecules; therefore, the chiral molecules act as spin filters. In past studies, correlation was found between the magnitude of the spin filtering and the intensity of the circular dichroism (CD) spectrum (the first Compton peak) of the molecules. Since the intensity of the CD peak relates to both the magnitude of the electric and magnetic dipole transitions, it was not clear which of these properties correlate with the CISS effect. This work aims at addressing this question. By studying the spin‐dependent conduction and the CD spectra of the thiol‐functionalized enantiopure binaphthalene (BINAP) and ternaphthalene (TERNAP), we found that both BINAP and TERNAP exhibit a similar spin polarization of 50%, despite the first Compton peak in TERNAP being almost twice as intense as the peak in BINAP. These results can be explained by the similar values of their anisotropy (or dissymmetry) factor, g abs , which is proportional to the magnetic transition dipole moment. Hence, we concluded that the CISS effect is proportional to the transition dipole moment in chiral molecules, namely, to the dissymmetry factor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Multiscale Characterization of Electrode-Induced Degradation in Perovskite Solar Cells

The stability of metal-halide-perovskite (MHP) solar cells must be understood and improved for the commercial viability of MHP technologies. Here, we apply multiscale characterization methods to study degradation modes, specifically electrode corrosion, for p-i-n MHP partial device stacks and full devices that are stored in the dark under an inert atmosphere. Our multiscale characterization approaches include full-device electro-optical performance using current-voltage (JV) curves and spatial imaging with electroluminescence (EL) and photoluminescence (PL). We further correlate interface properties using cross-sectional Kelvin probe force microscopy, which maps the nanoscale electric field properties, and electron microscopy, which demonstrates structural and chemical features. Devices stored as a full device stack degrade primarily by metal (Ag) electrode diffusion into the absorber, with formation of AgI byproducts and Ag accumulation near the indium tin oxide (ITO) contact. This causes decomposition of the perovskite absorber domains, loss of the potential drop at the electron transport layer (ETL)/perovskite interface near the metal contact, and increased equivalent resistance at the perovskite/hole transport layer (HTL) interface near the ITO contact. The devices stored without metal show a different degradation pathway dominated by corrosion of the ITO, creating voids at the ITO electrode surface with diffusion of In and Sn into the absorber. We conclude that metal electrode-induced degradation is the most severe degradation pathway under dark storage, but that ITO corrosion and absorber instability must also be mitigated. We further demonstrate mitigation of these degradation pathways by changes to the device stack, including a SnO x blocking layer at the ETL side and replacing ITO with FTO at the HTL side. These results provide a useful demonstration of specific dark degradation pathways at each electrode interface, as well as a unique multiscale example that links degradation of chemical, structural, and electrical interface properties to the full-device electro-optical characteristics.

14 SOLAR ENERGY↗
DOE OSTI2021

Sink Engineering in Photosynthetic Microbes

Photosynthetic organisms must balance harvested light energy (source) with a corresponding capacity to utilize the energy via downstream metabolic processes (sink). Insufficient source energy leads to starvation conditions, while insufficient sink capacity results in an overreduction of the electron transport chain, reduced photosynthetic efficiency, and photodamage. Despite the central importance of source/sink balancing in photosynthesis, our understanding of the mechanisms used to control this process in remains poor across diverse phototrophs. In particular, these balancing processes are essentially unstudied in cyanobacteria and microalgae, which possess distinct needs relative to the multicellular plants that have served as the model organisms for elucidating source/sink pathways. Recent bioengineering efforts have uncovered phenomena that are consistent with a well-developed source/sink sensing machinery in unicellular phototrophs. Furthermore, a deeper understanding of the fundamental mechanisms underlying source/sink dynamics in cyanobacteria and algae may prove to be critical for our capacity to boost photosynthetic efficiencies in these organisms, and enable their use as alternative crop species.

Carbon Fixation↗
DOE OSTI2020

Bifacial Multilayer Graphene Float Transfer

A method for graphene transfer which is referred to as “bifacial transfer” that allows transfer of multilayer chemical vapor deposition (CVD) graphene from both sides of a native metal substrate, such as an as-received nickel catalyst, is presented. In traditional transfer methods, the graphene on the “non-preferred” side, that is, the bottom of the substrate, is removed with oxygen plasma before removal of the metal catalyst in etchant solution. Although this treatment prevents undesired aggregation of the graphene films, it fails to utilize both sides of CVD-grown graphene. The bifacial transfer method reduces the cost of multilayer graphene by allowing the transfer of graphene from both sides of the substrate. The quality of graphene transferred from both sides onto target glass and polymer substrates is compared. The results of optical microscopy, confocal Raman spectroscopy, atomic force microscopy, and electronic transport measurements suggest that the quality of the multilayer graphene on the “non-preferred” side does not differ significantly from that of the “preferred” side. Overall, this method will allow more efficient and cost-effective use of graphene by doubling the usable graphene per area of growth substrate, and by eliminating the need for intermediate sacrificial transfer substrates such as poly(methyl methacrylate).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Enhancement of Photovoltaic Current through Dark States in Donor–Acceptor Pairs of Tungsten–Based Transition Metal Di–Chalcogenides

As several photovoltaic materials experimentally approach the Shockley– Queisser limit, there has been a growing interest in unconventional materials and approaches with the potential to cross this efficiency barrier. One such candidate is dark state protection induced by the dipole–dipole interaction between molecular excited states. This phenomenon has been shown to significantly reduce carrier recombination rate and enhance photon-to-current conversion, in elementary models consisting of few interacting chromophore centers. Atomically thin 2D transition metal di-chalcogenides (TMDCs) have shown great potential for use as ultrathin photovoltaic materials in solar cells due to their favorable photon absorption and electronic transport properties. TMDC alloys exhibit tunable direct bandgaps and significant dipole moments. In this work, the dark state protection mechanism has been introduced to a TMDC based photovoltaic system with pure tungsten diselenide (WSe 2 ) as the acceptor material and the TMDC alloy tungsten sulfo-selenide (WSeS) as the donor material. Furthermore, our numerical model demonstrates the first application of the dark state protection mechanism to a photovoltaic material with a photon current enhancement of up to 35% and an ideal photon-to-current efficiency exceeding the Shockley–Queisser limit.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Shape-Controlled NaTaO 3 by Flux-Mediated Synthesis

NaTaO 3 is a stable and wide bandgap n-type semiconductor material with many different applications. Here, a flux-mediated synthesis method is presented for NaTaO 3 resulting in highly distinctive, substrate covering shapes via precursor chemistry variation at comparatively low temperatures. It is found that the microstructure of the resulting NaTaO 3 films can be varied from nanocubes to smooth thin films. These shapes and surface chemistries can be correlated by employing density functional theory calculations and surface sensitive X-ray photoemission spectroscopy. This study provides guidance on how to synthesize the material and tailor its shape and surface termination for different applications. Finally, as a proof of concept of one possible application, NaTaO 3 is applied to perovskite solar cells as the electron transport layer, resulting in conversion efficiencies of >19%. Further, this study provides a new strategy for designing ternary oxide thin films for renewable energy applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Electrical Interrogation of Thickness‐Dependent Multiferroic Phase Transitions in the 2D Antiferromagnetic Semiconductor NiI 2

Abstract 2D magnetic materials hold promise for quantum and spintronic applications. 2D antiferromagnetic materials are of particular interest due to their relative insensitivity to external magnetic fields and higher switching speeds compared to 2D ferromagnets. However, their lack of macroscopic magnetization impedes detection and control of antiferromagnetic order, thus motivating magneto‐electrical measurements for these purposes. Additionally, many 2D magnetic materials are ambient‐reactive and electrically insulating or highly resistive below their magnetic ordering temperatures, which imposes severe constraints on electronic device fabrication and characterization. Herein, these issues are overcome via a fabrication protocol that achieves electrically conductive devices from the ambient‐reactive 2D antiferromagnetic semiconductor NiI 2 . The resulting gate‐tunable transistors show band‐like electronic transport below the antiferromagnetic and multiferroic transition temperatures of NiI 2 , revealing a Hall mobility of 15 cm 2 V −1 s −1 at 1.7 K. These devices also allow direct electrical probing of the thickness‐dependent multiferroic phase transition temperature of NiI 2 from 59 K (bulk) to 28 K (monolayer).

2D magnets↗
DOE OSTI2025

Ultra-Fast Non-Volatile Resistive Switching Devices with Over 512 Distinct and Stable Levels for Memory and Neuromorphic Computing

Low-current multilevel programmability with inherent non-volatility and high stability of resistance states is required for both multi-bit memory storage and deep learning accelerators but is difficult to achieve. Here, in a resistive switching system, this work realizes >512 (>9 bits) distinct non-volatile conductance levels with stable retention for each state with current levels down to the nanoampere range, highly promising for potential integration with small processing nodes with ultra-low power consumption requirements. This is achieved by demonstrating a new thin film design concept that encompasses three key features: an ultra-thin epitaxial oxygen ionic switching layer that provides a tunable energy barrier at the bottom electrode, an overcoat amorphous layer that acts as an ion migration barrier for stable state retention, and a partial conductive filament as a localized electronic transport channel to the epitaxial switching layer. A large dynamic resistance range of up to seven orders of magnitude is achieved with reset-free transitions among intermediate states, and programmability is demonstrated with ultra-fast (20 ns) pulses. Artificial neural network (ANN) simulations, based on the experimental performance and its non-idealities, demonstrate close-to-ideal inference accuracies for various Modified National Institute of Standards and Technology (MNIST) data sets.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Preparation of 2D Polyaniline/MoO 3– x Superlattice Nanosheets via Intercalation-Induced Morphological Transformation for Efficient Chemodynamic Therapy

Organic intercalation of layered nanomaterials is an attractive strategy to fabricate organic/inorganic superlattices for a wide range of promising applications. However, the synthesis of 2D organic/inorganic superlattice nanosheets remains a big challenge. In this work, the preparation of 2D polyaniline/MoO 3–x (PANI/MoO 3–x ) superlattice nanosheets via intercalation-induced morphological transformation from MoO 3 nanobelts, as efficient Fenton-like reagents for chemodynamic therapy (CDT), is reported. Micrometer-long MoO 3 nanobelts are co-intercalated with Na + /H 2 O followed by the guest exchange with aniline monomer for in situ polymerization to obtain PANI/MoO 3–x nanosheets. Intriguingly, the PANI intercalation can induce the morphological transformation from long MoO 3 nanobelts to 2D PANI/MoO 3–x nanosheets along with the partial reduction of Mo 6+ to Mo 5+ , and generation of rich oxygen vacancies. More importantly, thanks to the PANI intercalation-induced activation, the PANI/MoO 3–x nanosheets exhibit excellent Fenton-like catalytic activity for generation of hydroxyl radical (·OH) by decomposing H 2 O 2 compared with the MoO 3 nanobelts. It is speculated that the good conductivity of PANI can facilitate electron transport during the Fenton-like reaction, thereby enhancing the efficiency of CDT. Thus, the polyvinylpyrrolidone-modified PANI/MoO 3–x nanosheets can function as Fenton-like reagents for highly efficient CDT to kill cancer cells and eradicate tumors.

2D materials↗
DOE OSTI2020

High-Performance, Long-Life, Rechargeable Li–CO 2 Batteries based on a 3D Holey Graphene Cathode Implanted with Single Iron Atoms

A highly efficient cathode catalyst for rechargeable Li-CO 2 batteries is successfully synthesized by implanting single iron atoms into 3D porous carbon architectures, consisting of interconnected N,S-codoped holey graphene (HG) sheets. The unique porous 3D hierarchical architecture of the catalyst with a large surface area and sufficient space within the interconnected HG framework can not only facilitate electron transport and CO 2 /Li+ diffusion, but also allow for a high uptake of Li 2 CO 3 to ensure a high capacity. Consequently, the resultant rechargeable Li-CO 2 batteries exhibit a low potential gap of approximate to 1.17 V at 100 mA g -1 and can be repeatedly charged and discharged for over 200 cycles with a cut-off capacity of 1000 mAh g -1 at a high current density of 1 A g -1 . Density functional theory calculations are performed and the observed appealing catalytic performance is correlated with the hierarchical structure of the carbon catalyst. This work provides an effective approach to the development of highly efficient cathode catalysts for metal-CO 2 batteries and beyond.

(2) batteries↗