Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The association of nonthermal electrons with non-flaring coronal transients

A close temporal and spatial association has been found between erupting filaments/coronal transients and radio noise storm continua. The three transients studied occurred away from active regions and are members of a class not usually accompanied by chromospheric emission. The data analyzed were from the S-054 soft X-ray telescope on Skylab and from one- and two-dimensional interferometers at meter and decameter wavelengths at Nancay and Clark Lake observatories. Calculations confirmed that observed microwave radiation from the transients is due to thermal bremsstrahlung. The results are consistent with an interpretation of heating of an increased amount of coronal plasma by nonthermal, 10-100 keV electrons. Three possibilities for the source of the material are described: (1) the filament material; (2) evaporation from the chromosphere or transition region; and (3) via a long-lived reconnection process.

Webb, D. F.↗
NASA NTRS1980

A model of the SO2 atmosphere and ionosphere of Io

The calculations of thermal structure for an SO2 atmosphere of Io lead to exospheric temperatures in 800-1200 K range. The Pioneer 10 electron density profiles can be fit with an SO2 surface density of 1.2 x 10 to the 11th per cu cm at 5:30 pm local time and exosphere temperature of 1030 K. Low energy electrons provide the major ionization source but the solar UV absorption dominates the heating of the atmosphere due to the long wavelength absorption threshold of SO2 and large absorption cross sections.

Kumar, S.↗
NASA NTRS1980

Electron beam charging and ARC discharging of spacecraft insulating materials

The properties of the arc discharges which are caused by the laboratory exposure of dielectric materials to electron beams are examined, the intent being to simulate conditions on synchronous-orbit spacecraft. Extensive experimental studies are reported for planar dielectrics (Teflon, Kapton, Mylar) on the subjects of incident-flux scaling of discharge properties and the effects of high-energy broad-spectrum electron irradiation from a radioisotpe source. In addition a preliminary evaluation is made of the discharge susceptibility of fiber optic waveguides.

Balmain, K. G.↗
NASA NTRS1981

Lyman-alpha fluorescence from hydrogen photofragments of CH4 and H2O

The process of H-Lyman-alpha fluorescence produced through photodissociation of CH4 and H2O provides an example for the usefulness of the detection of fluorescence of dissociation fragments as an aid in identifying some high lying Rydberg states. In the first experiment reported, an electron storage ring synchrotron radiation source was used. The fluorescence produced was detected with a solar blind photomultiplier and a Cs photocathode with a spectral sensitivity in the wavelength range from 1050 to 1950 A. In the second experiment considered, an intense atomic line source was employed.

Wu, C. Y. R.↗
NASA NTRS1981

Acceleration of heavy ions on auroral field lines

Results of both a linear and a nonlinear study of oxygen cyclotron waves and the associated oxygen heating are presented. Linear theory predicts that oxygen cyclotron waves will have smaller growth rates than hydrogen cyclotron waves. Results of a simulation study in which the free energy source is an initial drifting electron distribution indicate that oxygen cyclotron waves only grow to small amplitudes, while the hydrogen cyclotron waves achieve larger amplitudes. In an attempt to model more realistically the continuous ionospheric outflow, a simulation model is used, in which the electron velocity distribution is maintained by a constant flow of electrons. This latter model predicts that the oxygen waves grow to amplitudes much larger than the hydrogen waves resulting in the preferential heating of the heavier ions.

Ashour-Abdalla, M.↗
NASA NTRS1985

Solar-Powered Flywheel

Energy-storage system has 20 year lifetime. Electrical power source consisting of flywheel and electronic control system stores solar energy. Flywheel developed for space vehicles features good weight-to-energy storage ratios and used as control gyroscope for maneuvering.

Nola, F. J.↗
NASA NTRS1982

Development of a new, completely implantable intraventricular pressure meter and preliminary report of its clinical experience

A completely implantable intracranial pressure sensor designed for long-term measurement of intraventricular pressure in hydrocephalic patients is described. The measurement principal of the device is discussed along with the electronic and component structure and sources of instrument error. Clinical tests of this implanted pressure device involving both humans and animals showed it to be comparable to other methods of intracranial pressure measurement.

Osaka, K.↗
NASA NTRS1986

The poleward edge of the mid-latitude trough - Its formation, orientation and dynamics

Data from the Advanced Ionospheric Sounder (AIS) deployed at Halley, Antarctica (76-deg S, 27-deg W; L = 4.2) and the Dynamics Explorer-2 spacecraft (DE-2) are used to investigate several aspects of the formation processes and dynamics of the poleward edge of the midlatitude electron density trough. These include a study of the flux and energy of charged particles precipitating into the F-region as a function of Magnetic Local Time. It is found that local energetic electron precipitation is a major source of ionization of the poleward edge in the evening sector, but only after magnetic midnight transport processes become more important. Occasionally a significant increase in the flux of conjugate photoelectrons is colocated with the poleward edge of the trough in the morning sector. The combination of AIS and DE-2 data has allowed identification of significant longitudinal structure on the poleward edge of the trough that may be the result of substorm activity. It is found that the orientation of the poleward edge of the trough and the locus of the plasmapause predicted from the 'tear-drop' model vary in rather a similar manner with local time, though no close physical link between the two features is inferred from this coincidence.

Rodger, A. S.↗
NASA NTRS1989

Radio emission from the magnetic equator of Uranus

The major observational characteristics of the smooth, narrow bandwidth component of Uranus' radio emissions are well described by sources radiating near the local electron gyrofrequency, confined to the magnetic equatorial plane and encircling the planet at radial distances of approximately 2 to 3 R(U). The most intense emission appears to be generated in association with the epsilon ring at 2.0 R(U) radial distance. A cold electron density of less than or equal to 4/cu cm are inferred in this region.

Kaiser, M. L.↗
NASA NTRS1992

Alignment of the atmospheric visibility monitoring telescope

Alignment of the first Atmospheric Visibility Monitoring Telescope has revealed errors in mount design, mount manufacture, software, and electronics. This article discusses error sources and solutions, and re-alignment results. Alignment requirements for operation are also presented. The telescope now operates with the desired accuracy and repeatability.

Cowles, K.↗
NASA NTRS1993

Fabrication of photovoltaic laser energy converterby MBE

A laser-energy converter, fabricated by molecular beam epitaxy (MBE), was developed. This converter is a stack of vertical p-n junctions connected in series by low-resistivity, lattice matched CoSi2 layers to achieve a high conversion efficiency. Special high-temperature electron-beam (e-beam) sources were developed especially for the MBE growth of the junctions and CoSi2 layers. Making use of the small (greater than 1.2 percent) lattice mismatch between CoSi2 and Si layers, high-quality and pinhole-free epilayers were achieved, providing a capability of fabricating all the junctions and connecting layers as a single growth process with one pumpdown. Well-defined multiple p-n junctions connected by CoSi2 layers were accomplished by employing a low growth temperature (greater than 700 C) and a low growth rate (less than 0.5 microns/hour). Producing negligible interdiffusion, the low growth temperature and rate also produced negligible pinholes in the CoSi2 layers. For the first time, a stack of three p-n junctions connected by two 10(exp -5) Ohm-cm CoSi2 layers was achieved, meeting the high conversion efficiency requirement. This process can now be optimized for high growth rate to form a practical converter with 10 p-n junctions in the stack.

Lu, Hamilton↗
NASA NTRS1991

Optical correlators for automated rendezvous and capture

The paper begins with a description of optical correlation. In this process, the propagation physics of coherent light is used to process images and extract information. The processed image is operated on as an area, rather than as a collection of points. An essentially instantaneous convolution is performed on that image to provide the sensory data. In this process, an image is sensed and encoded onto a coherent wavefront, and the propagation is arranged to create a bright spot of the image to match a model of the desired object. The brightness of the spot provides an indication of the degree of resemblance of the viewed image to the mode, and the location of the bright spot provides pointing information. The process can be utilized for AR&C to achieve the capability to identify objects among known reference types, estimate the object's location and orientation, and interact with the control system. System characteristics (speed, robustness, accuracy, small form factors) are adequate to meet most requirements. The correlator exploits the fact that Bosons and Fermions pass through each other. Since the image source is input as an electronic data set, conventional imagers can be used. In systems where the image is input directly, the correlating element must be at the sensing location.

Juday, Richard D.↗
NASA NTRS1992

The x ray reflectivity of the AXAF VETA-I optics

The x-ray reflectivity of the VETA-I optic, the outermost shell of the AXAF x-ray telescope, with a bare Zerodur surface, is measured and compared with theoretical predictions. Measurements made at energies of 0.28, 0.9, 1.5, 2.1, and 2.3 keV are compared with predictions based on ray trace calculations. The data were obtained at the x-ray calibrations facility at Marshall Space Flight Center with an electron impact x-ray source located 528 m from the grazing incidence mirror. The source used photoelectric absorption filters to eliminate bremsstrahlung continuum. The mirror has a diameter of 1.2 m and a focal length of 10 m. The incident and reflected x-ray flux are detected using two proportional counters, one located in the incident beam of x-rays at the entrance aperture of the VETA-I, and the other in the focal plane behind an aperture of variable size. Results on the variation of the reflectivity with energy as well as the absolute value of the reflectivity are presented. We also present a synchrotron reflectivity measurement with high energy resolution over the range 0.26 to 1.8 keV on a flat Zerodur sample, done at NSLS. We present evidence for contamination of the flat by a thin layer of carbon on the surface, and the possibility of alteration of the surface composition of the VETA-I mirror perhaps by the polishing technique. The overall agreement between the measured and calculated effective area of VETA-I is between 2.6 percent and 10 percent, depending on which model for the surface composition is adopted. Measurements at individual energies deviate from the best-fitting calculation to 0.3 to 0.8 percent, averaging 0.6 percent at energies below the high energy cutoff of the mirror reflectivity, and are as high as 20.7 percent at the cutoff. We also discuss the approach to the final preflight calibration of the full AXAF flight mirror.

Kellogg, Edwin M.↗
NASA NTRS1994

Powerful Electromechanical Linear Actuator

Powerful electromechanical linear actuator designed to replace hydraulic actuator that provides incremental linear movements to large object and holds its position against heavy loads. Electromechanical actuator cleaner and simpler, and needs less maintenance. Two principal innovative features that distinguish new actuator are use of shaft-angle resolver as source of position feedback to electronic control subsystem and antibacklash gearing arrangement.

Cowan, John R.↗
NASA NTRS1994

NAFTA literature at the International Trade Commission library

Most of the US official materials regarding NAFTA originate in the Executive Office of the President, especially the Office of the United States Trade Representative. These materials can be purchased from the U.S.G.P.O. There were also numerous Congressional hearings; many of which are probably now out of print, government agencies and the public are welcome to make copies of the ones in the collections of the ITC libraries. One of the most important sources of materials available in electronic format is the National Trade Data Base, produced by the Department of Commerce. This is a collection of at least 120 separate files containing documents relating to trade. It includes several files specifically on NAFTA, including the text of the treaty. It is available as two CD-ROM's, issued monthly, or on Internet.

Root, Elizabeth A.↗
NASA NTRS1995

Three-fluid solar wind model with Alfven waves

We present a study of a three-fluid solar wind model. with continuity, momentum and separate energy equations for protons. alpha particles and electrons. Allowing separate coronal heat sources for all three species, we study the flow properties of the solar wind as a function of heat input, Alfven wave energy input, and alpha particle abundance.

Esser, Ruth↗
NASA NTRS1995

The energy associated with MHD waves generation in the solar wind plasma

Gyrotropic symmetry is usually assumed in measurements of electron distribution functions in the heliosphere. This prevents the calculation of a net current perpendicular to the magnetic field lines. Previous theoretical results derived by one of the authors for a collisionless plasma with isotropic electrons in a strong magnetic field have shown that the excitation of MHD modes becomes possible when the external perpendicular current is non-zero. We consider then that any anisotropic electron population can be thought of as 'external', interacting with the remaining plasma through the self-consistent electromagnetic field. From this point of view any perpendicular current may be due to the anisotropic electrons, or to an external source like a stream, or to both. As perpendicular currents cannot be derived from the measured distribution functions, we resort to Ampere's law and experimental data of magnetic field fluctuations. The transfer of energy between MHD modes and external currents is then discussed.

delaTorre, A.↗
NASA NTRS1997

Development and Operation of the Astrophysics Data System

The Astrophysics Data System (ADS) provides access to astronomical bibliographic information, including references, abstracts, and full journal articles, as well as links to other on-line information sources like on-line electronic journals and on-line data. This section will first provide a brief history of the ADS, a general introduction of the current system, and a more detailed description of some of the parts of the ADS.

Murray, Stephen S.↗