Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dispersion function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quantum optimal control for pure-state preparation using one initial state

This paper presents a framework for solving the pure-state preparation problem using numerical optimal control. As an example, we consider the case where a number of qubits are dispersively coupled to a readout cavity. Herein, we model open system quantum dynamics using the Markovian Lindblad master equation driven by external control pulses. The main result of this paper develops a basis of density matrices (a parameterization) where each basis element is a density matrix by itself. Utilizing a specific objective function, we show how an ensemble of the basis elements can be used as a single initial state throughout the optimization process—independent of the system dimension. We apply the general framework to the specific application of ground-state reset of one and two qubits coupled to a readout cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Selective volatile organic compound gas sensor based on carbon nanotubes functionalized with ZnO nanoparticles

Here this paper describes the theory and results for a new class of low-cost chemoresistive gas sensors designed for selective hydrocarbon gas detection. The sensors utilize a multiwalled carbon nanotube (MWCNT) backbone functionalized with metal oxide nanocrystals. Specifically, nanoparticles were grown on the surface of the MWCNTs using atomic layer deposition. The crystallinity of the ZnO-MWCNTs' heterostructure was examined by using a high-resolution transmission electron microscope. The structure of the ZnO/MWCNTs was analyzed using a scanning electron microscope and energy dispersive x ray. The Hall effect measurement shows p-type characteristics of the MWCNTs, supporting the typical PN junction formation with n-type ZnO nanocrystals. The electron-donating ability of ZnO provided a strong response to the ppm levels of toluene at room temperature (25 °C) and showed strong selectivity with other volatile organic compound gases such as benzene, methane, and formaldehyde.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

XRF-MAPS

x-ray fluorescence (XRF) imaging typically involves the creation and analysis of 3D data sets, where at each scan position a full energy dispersive x-ray spectrum is recorded. This allows one to later process the data in a variety of different approaches, e.g., by spectral region of interest (ROI) summation with or without background subtraction, principal component analysis, or fitting. XRF-Maps is a C++ open source software package that implements these functions to provide a tool set for the analysis of XRF data sets.

GLOWACKI, ARTHURT↗
DOE OSTI2024

Atomic Diffusivities of Yttrium, Titanium and Oxygen Calculated by Ab Initio Molecular Dynamics in Molten 316L Oxide-Dispersion-Strengthened Steel Fabricated via Additive Manufacturing

Oxide-dispersion-strengthened (ODS) steels have long been viewed as a prime solution for harsh environments. However, conventional manufacturing of ODS steels limits the final product geometry, is difficult to scale up to large components, and is expensive due to multiple highly involved, solid-state processing steps required. Additive manufacturing (AM) can directly incorporate dispersion elements (e.g., Y, Ti and O) during component fabrication, thus bypassing the need for an ODS steel supply chain, the scale-up challenges of powder processing routes, the buoyancy challenges associated with casting ODS steels, and the joining issues for net-shape component fabrication. In the AM process, the diffusion of the dispersion elements in the molten steel plays a key role in the precipitation of the oxide particles, thereby influencing the microstructure, thermal stability and high-temperature mechanical properties of the resulting ODS steels. In this work, the atomic diffusivities of Y, Ti, and O in molten 316L stainless steel (SS) as functions of temperature are determined by ab initio molecular dynamics simulations. The latest Vienna Ab initio Simulation Package (VASP) package that incorporates an on-the-fly machine learning force field for accelerated computation is used. At a constant temperature, the time-dependent coordinates of the target atoms in the molten 316L SS were analyzed in the form of mean square displacement in order to obtain diffusivity. The values of the diffusivity at multiple temperatures are then fitted to the Arrhenius form to determine the activation energy and the pre-exponential factor. Given the challenges in experimental measurement of atomic diffusivity at such high temperatures and correspondingly the lack of experimental data, this study provides important physical parameters for future modeling of the oxide precipitation kinetics during AM process.

Chemistry↗
DOE OSTI2026

$Ξ$ 𝑏 → $Ξ$ form factors from lattice QCD and standard-model predictions for $Ξ$ 𝑏 → $Ξ$⁢𝜇 + ⁢𝜇 − and $Ξ$ 𝑏 → $Ξ$⁢𝛾 decays

We present the first lattice QCD determination of the $Ξ$ 𝑏 → $Ξ$ vector, axial-vector, and tensor form factors, which are relevant for the theory of rare decays including $Ξ$ 𝑏 → $Ξ$⁢ℓ + ⁢ℓ − and $Ξ$ 𝑏 → $Ξ$⁢𝛾. The calculation is performed with 2+1 flavors of domain-wall fermions at three different lattice spacings and pion masses in the range from approximately 430 to 230 MeV. The bottom quark is implemented using an anisotropic clover action. Three-point functions with a wide range of source-sink separations and model averaging are used to extract the ground-state contributions. We fit the dependence of the form factors on the momentum transfer, the pion mass, and the lattice spacing using modified 𝑧 expansions that account for subthreshold branch cuts, and apply dispersive bounds and asymptotic behavior constraints to achieve controlled uncertainties in the full semileptonic kinematic region. Using our form factor results, we present standard model predictions for the $Ξ$$^{−}_{𝑏}$ → $Ξ$ − ⁢𝛾 and $Ξ$$^{−}_{𝑏}$ → $Ξ$ − ⁢𝜇 + ⁢𝜇 − branching fractions and two angular observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Evolution of nontrivial Fermi surface features in the band structures of the homologous members Pb 5 Bi 6 Se 14 and Pb 5 Bi 12 Se 23

High-quality single crystals of (PbSe) 5 (Bi 2 Se 3 ) 3m were grown and analyzed by nuclear magnetic resonance (NMR) spectroscopy. We report on 77 Se and 207 Pb NMR shifts and nuclear spin-lattice relaxation measurements in the naturally formed heterostructure homology (PbSe) 5 (Bi 2 Se 3 ) 3m with m = 1 (Pb 5 Bi 6 Se 14 ) and m = 2 (Pb 5 Bi 12 Se 23 ). A distinct site-specific contribution has been detected for both nuclei as a function of temperature, which reveals an electronic changeover from a semiconducting (Pb 5 Bi 6 Se 14 ) to a semimetalliclike (Pb 5 Bi 12 Se 23 ) system with nontrivial band structure features near the Fermi level. The temperature dependences of the relaxation rates are dominated by significant changes in the topology of energy dispersions accompanied with band edges and crossings in the region of the Fermi surface. These results, which interrogate nuclear spin interactions from selected atomic sites, clearly expose the effects of the added Bi 2 Se 3 layer on the crystal and electronic structure of (Pb 5 Bi 12 Se 23 ). These findings provide direct microscopic insight into the unconventional and dual nature of the electronic structure of these homologous thermoelectric and topologically nontrivial compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Dry heat sterilization as a method to recycle N95 respirator masks: The importance of fit

In times of crisis, including the current COVID-19 pandemic, the supply chain of filtering facepiece respirators, such as N95 respirators, are disrupted. To combat shortages of N95 respirators, many institutions were forced to decontaminate and reuse respirators. While several reports have evaluated the impact on filtration as a measurement of preservation of respirator function after decontamination, the equally important fact of maintaining proper fit to the users’ face has been understudied. In the current study, we demonstrate the complete inactivation of SARS-CoV-2 and preservation of fit test performance of N95 respirators following treatment with dry heat. We apply scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD) measurements, Raman spectroscopy, and contact angle measurements to analyze filter material changes as a consequence of different decontamination treatments. We further compared the integrity of the respirator after autoclaving versus dry heat treatment via quantitative fit testing and found that autoclaving, but not dry heat, causes the fit of the respirator onto the users face to fail, thereby rendering the decontaminated respirator unusable. Our findings highlight the importance to account for both efficacy of disinfection and mask fit when reprocessing respirators to for clinical redeployment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

3D printable polymeric lightning strike protection system for fiber reinforced composites

The current embodiments include all-polymeric protective material for mitigating lightning strike damage. The protective material includes a hybrid matrix comprising PANI and MXene dispersed within a thermosetting epoxy resin. This hybrid matrix can be painted, printed, or applied as a conductive polymeric layer to a FRCP structure, for example an aircraft fuselage, wing, empennage, control surface (aileron, flap, slats, rudder, elevator) or a wind turbine blade. The protective material not only withstands lightning strikes, but also functions as shielding against electromagnetic interference and is corrosion-resistant and lightweight.

Kumar, Vipin↗
DOE OSTI2025

Phonon spectrum in the spin-Peierls phase of CuGeO 3

CuGeO 3 has long been studied as a prototypical example of the spin-Peierls transition in a 𝑆 = 1/2 Heisenberg chain. Despite intensive investigation of this quasi-one-dimensional material, systematic measurements and calculations of the phonon excitations in the dimerized phase have not to date been possible, leaving certain aspects of the spin-Peierls phenomenon unresolved. We perform state-of-the-art density functional theory (DFT) calculations to compute the electronic structure and phonon dynamics in the low-temperature dimerized phase. We also perform high-resolution neutron spectroscopy to measure the full phonon spectrum over multiple Brillouin zones. We find excellent agreement between our numerical and experimental results that extend to all measurement temperatures. Notable features of our phonon spectra include a number of steeply dispersive modes, nonmonotonic dispersion features, and specific phonon anticrossings, which we relate to the mode eigenvectors. By calculating the magnetic interactions within DFT and studying the effects of different phonon modes on the superexchange paths, we discuss the possibility of observing spin-phonon hybridization effects in experiments performed both in and out of equilibrium.

density functional theory↗
DOE OSTI2024

Terahertz-polarizing effect based on geometric anisotropy of Ti 3 C 2 T x MXene nanosheets

Two-dimensional (2D) nanomaterials have garnered considerable attention due to their unique properties, such as thinness and excellent electronic properties. The inherent anisotropy of 2D nanomaterials, which is characterized by their high aspect ratio, can maximize the directional functionality to enhance the conductivity and utilization of edges. Here, we demonstrate how to utilize the edges of titanium carbide (Ti 3 C 2 T x ) MXene nanosheet to control the linear polarization in the terahertz (THz) frequency range. By a simple and unique vertical alignment exploiting the high surface charge and excellent colloidal dispersibility of MXene nanosheets, MXene nanosheets are vertically oriented along an applied AC electric field. The well-aligned edges justify the THz polarizing effect, revealing outstanding performances such as the broadband coverage in 0.2–1.5 THz and an exceptional extinction ratio reaching 20 dB. Furthermore, we vary the local orientation of the vertical MXene nanosheets by tailoring the applied electric field, enabling spatially controllable polarization capabilities. Our results can provide a generic tool for the utilization of 2D nanomaterials in diverse potential applications in optics and electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS 2 Ink

In this work, we report on the preparation of inks containing fillers derived from quasi-two-dimensional charge-density-wave materials, their application for inkjet printing, and the evaluation of their electronic properties in printed thin-film form. The inks were prepared by liquid-phase exfoliation of CVT-grown 1T-TaS 2 crystals to produce fillers with nm-scale thickness and μm-scale lateral dimensions. Exfoliated 1T-TaS 2 was dispersed in a mixture of isopropyl alcohol and ethylene glycol to allow fine-tuning of filler particles thermophysical properties for inkjet printing. The temperature-dependent electrical and current fluctuation measurements of printed thin films demonstrated that the charge-density-wave properties of 1T-TaS 2 are preserved after processing. The functionality of the printed thin-film devices can be defined by the nearly commensurate to the commensurate charge-density-wave phase transition of individual exfoliated 1T-TaS 2 filler particles rather than by electron-hopping transport between them. The obtained results are important for the development of printed electronics with diverse functionality achieved by the incorporation of quasi-two-dimensional van der Waals quantum materials.

1T-TaS2↗
DOE OSTI2024

Effects of electron beam irradiation on CrMnV and CrMnTiV high entropy alloys: Nano-mechanical, structural, and thermodynamic perspectives

Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical responses. According to the thermodynamic calculations, both equiatomic CrMnV and the addition of 7% of Ti with equiatomic CrMnV yield solid-solutions phases. The structural and mechanical properties of CrMnV and CrMnTiV samples were tested using field emission scanning electron microscopy, atomic force microscopy, scanning electron microcopy with energy dispersive x-ray spectroscopy, x-ray diffraction, and nanoindentation before and after exposure to a dose of ~66 kGy from a 10 MeV e-beam accelerator. Despite exhibiting beam transmission characteristics comparable to Cr and V, the indentation hardness of HEAs exceeded that of the Cr and V samples by five to six times. The examination of the CrMnTiV irradiated samples revealed organized deformation patterns depicting new features, which we suspect twinning and twin boundaries due to the addition of Ti to CrMnV. Ti, a hexagonal-close-packed crystal structure, is commonly known for deformation twinning behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Intercalation induced quasi-freestanding layer in TiSe 2

Angle-resolved photoemission spectroscopy is employed to study the electronic structure of bulk TiSe 2 before and after doping with potassium impurities. A splitting in the conduction band into two branches is observed after room-temperature deposition. The splitting energy increases to approximately 130 meV when the sample is cooled to 40 K. One branch exhibits a nondispersive two-dimensional feature, while the other shows the characteristics of three-dimensional bulk band dispersion. Core-level spectroscopy suggests that the K impurities predominantly occupy the intercalated sites within the van der Waals gap. Furthermore, the results indicate the formation of a quasi-freestanding TiSe 2 layer. Additionally, doping completely suppresses the periodic lattice distortion in the surface region. These findings are further supported by density functional theory calculations, which compare the band structure of monolayer and bulk TiSe 2 with experimental data. Thus, the dimensional and intrinsic electronic properties of 1⁢𝑇−TiSe 2 can be controlled through the intercalation procedure used in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Protected fermionic zero modes in periodic gauge fields

It is well known that macroscopically normalizable zero-energy wave functions of spin-$\frac{1}{2}$ particles in a two-dimensional inhomogeneous magnetic field are spin-polarized and exactly calculable with degeneracy equaling the number of flux quanta linking the whole system. Here, extending this argument to massless Dirac fermions subjected to magnetic fields that have zero net flux but are doubly periodic in real space, we show that there exist only two Bloch-normalizable zero-energy eigenstates, one for each spin flavor. This result is immediately relevant to graphene multilayer systems subjected to doubly periodic strain fields, which at low energies enter the Hamiltonian as periodic pseudogauge vector potentials. Furthermore, we explore various related settings including nonlinearly dispersing band structure models and systems with singly periodic magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bridging the gap between molecules and materials in quantum chemistry with localized active spaces

The number of materials that “bridge the gap” between single molecules and extended solids, such as metal-organic frameworks and organic semiconductors, has been increasing. Consequently, there is a growing need for modeling approaches that effectively integrate the real-space molecular perspective employed by computational chemists and the reciprocal-space dispersive perspective employed by computational physicists. Here, we propose the localized active space (LAS) approach as a promising method to successfully bridge this gap. The LAS approach extends the active space concept from multiconfigurational methods such as complete active space self-consistent field theory to multiple molecular fragments via a product-form wave function ansatz. Here, we apply this method to solid state phenomena by treating each unit cell as a fragment with different sets of local quantum numbers (e.g., charge and excitation number). State interaction between these LAS states (LASSI) thus provides a comprehensive basis for the study of charge and energy transfer, meeting and surpassing the capabilities of single-reference fragmentation approaches such as constrained density functional theory (cDFT). Most centrally, we show how combining this LASSI approach with multiconfigurational pair-density functional theory (MC-PDFT) provides an elegant and efficient method to compute band structures that capture multiconfigurational character. We apply the LASSI band structure approach to the computation of band gaps in stretched hydrogen chain, polyacetylene, and bulk nickel oxide (NiO), finding good or excellent quantitative agreement with reference values in all cases. Additionally, we use the LAS basis in one-dimensional model systems to demonstrate its ability to treat difficult solid-state phenomena such as exciton transfer and excitation at p-n junctions.

method development↗
DOE OSTI2021

Tracing the Mott-Hubbard transition in one-dimensional Hubbard models without Umklapp scattering

Here we apply the density-matrix renormalization group (DMRG) method to a one-dimensional Hubbard model that lacks Umklapp scattering and thus provides an ideal case to study the Mott-Hubbard transition analytically and numerically. The model has a linear dispersion and displays a metal-to-insulator transition when the Hubbard interaction U equals the bandwidth U c = W, where the single-particle gap opens linearly, Δ(U ≥ W) = U - W. The simple nature of the elementary excitations permits us to determine numerically with high accuracy the critical interaction strength and the gap function in the thermodynamic limit. The jump discontinuity of the momentum distribution $n_k$ at the Fermi wave number $k_F$ = 0 cannot be used to locate accurately U c from finite-size systems. However, the slope of $n_k$ at the band edges $k_B$ = ±π, reveals the formation of a single-particle bound state which can be used to determine U c reliably from $n_k$ using accurate finite-size data.

1-dimensional systems↗
DOE OSTI2022

Radiological Considerations Supporting the American Medical Isotope Producer Niowave

This report provides a summary of work performed by Savannah River National Laboratory (SRNL) during FY22 in support of Niowave, an American Medical Isotope Production (AMIP) facility. SRNL served in a technical support role, funded by NA-231, supporting Niowave in the beginning of non radiological functional testing of their airport facility in FY22. Through this agreement, SRNL provides Niowave access to subject matter experts (SMEs) for questions that may arise during the drafting of engineering plans, facility policies, and/or response procedures. This report summarizes discussions between SRNL and Niowave about guidance concerning issues with the floor of the hot cells, dispersible removable contamination (beta emitting fission product), hot cell operation specifically utilization of cameras or mirrors, and the process for removing contaminated waste from the hot cell. Lessons learned and other various resources provided to Niowave by SRNL during FY22 are referenced in this report. This work was funded through NNSA’s Office of Material Management and Minimization, Conversion Office (NA-231).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Cross-linkable nanocomposite anticorrosion coating

Nanocomposite anticorrosion coating can be achieved by depositing alternating, multilayers of a cross-linkable polymer and dispersed and aligned inorganic platelets followed by cross-linking of the cross-linkable polymer. The cross-linkable polymer can be an externally cross-linkable polymer that is cross-linked by diffusing a cross-linking agent into the deposited multilayer coating. Alternately, the cross-linkable polymer can be a functionalized cross-linkable polymer that is cross-linked by self-curing, thermal heat curing, or light (e.g., UV) following deposition of the multilayer coating.

Percival, Stephen John↗