Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Residual thermal strains and stresses in nickel aluminide matrix composites

Thermally induced residual strains and stresses developed during postfabrication cooling in Saphikon/NiAl and tungsten/NiAl high-temperature composites are investigated through three-dimensional elastoplastic finite-element analyses. Average axial and transverse strains in the matrix are found to be tensile and compressive, respectively, and similar for both Saphikon and W-fiber-reinforced NiAl composites. It is suggested that the residual matrix stresses and strains are controlled more by the low-matrix yield stress than by the fiber/matrix expansion mismatch. Residual thermal strains in the matrix of these composites are measured by using a neutron-diffraction technique; the measured axial and transverse strains in the matrix are found to be in agreement with the computed values.

Saigal, A.↗

Self-Amplified Optical Pattern Recognizer

Self-amplified optical pattern recognizers developed for use in recognition of patterns, in optical computing, and in optoelectronic neural networks. In recognizer, photorefractive crystal serves as medium in which one holographically records diffraction-grating filter representing pattern with which recognition sought. Apparatus "self-amplified" because signal amplified within filter to many orders of magnitude greater than in prior optical pattern recognizers. Basic principle of operation applicable to many types of correlation filters, including (but not limited to) Vander Lugt matched filters, joint-transform filters, and phase-only filters.

Liu, Hua-Kuang↗

Understanding the Chemical Complexity of Multicomponent Systems: Uranium Polyoxometalates as Nanosorbents

The overarching objective of this project was to develop a molecular-scale understanding of chemical interactions of the transuranic (TRU) elements with uranyl-based polyoxometalate nanoclusters (UPOMs). The specific goals that supported this overarching objective were to: (i) quantify TRU interactions with UPOMs as a function of TRU, carbonate, and UPOM concentration, pH, and temperature; (ii) examine the molecular-level bonding environment of TRU-UPOM complexes; and (iii) develop a rate expression capable of describing the sorption and reduction of TRU by UPOMs. The published literature suggests several potential interactions can occur in TRU-UPOM systems: (i) encapsulation of TRU and coordination with the internal ‘-yl’ oxygens of the UPOM, (ii) coordination of TRU with the external ‘-yl’ oxygens of the UPOM, and (iii) coordination of TRU with the bridging ligands (e.g., peroxo, hydroxo, oxalate) of the UPOM. The latter two may induce aggregation of the UPOMs. The concept of encapsulation is demonstrated by the X-ray diffraction structure of crystallized U 20 , which reveals a Na + cation under each pentagonal face (Sigmon et al., 2009). Computational modeling shows that, while the negative charge of U 20 is spread among all the oxygen atoms, the internal ‘-yl’ oxygens host the most negative charge (Miro and Bo, 2012). This negative charge is reduced through the complexation of the templating sodium ions in the interior of the UPOM. Furthermore, Nyman et al. (2011) shows that cesium can exit through the pentagonal window of U 28 in the aqueous phase, suggesting that the TRU elements, which are smaller than cesium, may be capable of entering a UPOM through these windows in an exchange reaction. Under this project, we focused on hafnium, neptunium, and plutonium interactions with UPOMs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Resonant X-ray Diffraction Reveals the Location of Counterions in Doped Organic Mixed Ionic Conductors

Organic mixed ionic–electronic conductors (OMIECs) have the potential to enable diverse new technologies, ranging from novel in situ biosensors to flexible energy storage devices and neuromorphic computing platforms. However, their complex behavior in functional films involving electrolyte-induced swelling, ion ingress, and electrochemical doping inhibits rational material design. Of critical importance is an understanding of the specific location of the ions in the volumetrically doped material, yet this information is not readily available. Here, in this report, we present the use of grazing- incidence resonant X-ray diffraction (RXRD, also known as anomalous diffraction) at S and Cl K-edges to determine the structure of a doped, prototypical, semicrystalline polymer OMIEC based on oligo(ethylene glycol) substitution of regioregular polythiophene. The RXRD measurement provides two key insights. Quantitative analysis of the RXRD allows the determination of the position of the ion relative to the polymer backbone in the crystalline regions. We find that the anion is relatively distant from the backbone, nearer to the lamella mid-plane naively in conflict with expected Coulombic attraction between the ion and the doped polymer polaron. Comparison of RXRD to Cl – fluorescence (total Cl – ) allows determination of the relative order of doping between the crystalline and amorphous regions. We find preferential doping of the crystalline regions. Both insights, the preferential doping of crystals at low potential and the specific location of the counterion with respect to the polymer backbone, are critical to developing a microscopic understanding of transport in OMIECs.

36 MATERIALS SCIENCE↗

X-ray phase laminography with a grating interferometer using iterative reconstruction

X-ray phase computed laminography is performed using a Talbot interferometer and synchrotron radiation. An iterative reconstruction algorithm which includes prior information about limited support, range of values and sparsity of the imaged object has been developped. It allows the reconstruction of objects with an improved resolution of the unsampled frequencies, compared to the classical filtered backprojection. The imaging method, demonstrated for a nylon mesh sample and a leaf sample, shows promising results for the imaging of flat, laterally extended objects made of low absorbing elements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A method to generate conformal finite-element meshes from 3D measurements of microstructurally small fatigue-crack propagation [A method to generate conformal finite-element meshes from 3D measurements of microstructurally small fatigue-crack propagation: 3D Meshes of Microstructurally Small Crack Growth]

In an effort to reproduce computationally the observed evolution of microstructurally small fatigue cracks (MSFCs), a method is presented for generating conformal, finite-element (FE), volume meshes from 3D measurements of MSFC propagation. The resulting volume meshes contain traction-free surfaces that conform to incrementally measured 3D crack shapes. Grain morphologies measured using near-field high-energy X-ray diffraction microscopy are also represented within the FE volume meshes. Proof-of-concept simulations are performed to demonstrate the utility of the mesh-generation method. The proof-of-concept simulations employ a crystal-plasticity constitutive model and are performed using the conformal FE meshes corresponding to successive crack-growth increments. Although the simulations for each crack increment are currently independent of one another, they need not be, and transfer of material-state information among successive crack-increment meshes is discussed. The mesh-generation method was developed using post-mortem measurements, yet it is general enough that it can be applied to in-situ measurements of 3D MSFC propagation.

36 MATERIALS SCIENCE↗

Simulation and Emulation of X-Ray Diffraction from Dynamic Compression Experiments

Many important aspects of the dynamic thermo-mechanical response of materials occur at the mesoscale, i.e. a physical scale of interactions smaller than what can be adequately described by homogenous behaviors, yet larger than the scale of the atomic lattice. Concurrent advancements in computational power, continuum theory, and experimental diagnostics are enabling unprecedented understanding of such interactions. However, we cannot develop a sufficient level of confidence in such mesoscale capability until the constitutive description of the underlying constituents is reliably representative of their actual physical behavior. Therefore, there is a strong need to combine experimental, modeling, and data-science techniques to validate models of the thermomechanical response of individual single crystals. One experimental diagnostic with high potential impact to shock physics and materials science is in-situ x-ray diffraction. This paper is primarily focused on simulation of x-ray diffraction in shock physics, but with an aim toward quantifying parametric uncertainty of simulation models. Here, we develop and demonstrate a data-science and model-driven approach to constrain the parameterization of continuum models of crystal lattice deformation associated with the shock response of crystalline materials. The framework is built around the connection between continuum hydrodynamic simulations of lattice deformation and a new Bragg diffraction simulation code, BarberShop. The dynamic deformation of a crystal lattice is modeled using the DiscoFlux model within an arbitrary Lagrangian-Eulerian hydrodynamic code, FLAG. These detailed continuum simulations of lattice deformation can be computationally slow, thus a statistical model is used to emulate the evolution of lattice deformation fields in time and across the considered model parameter space. Emulated lattice deformation fields can then be generated rapidly for any combination of physics model parameters. In turn, these fields can be fed into BarberShop to realize a rapid prediction of Bragg diffraction patterns associated with particular values of physics model parameters. The framework enables parameterization of the single crystal model to obtain Bragg diffraction patterns that most closely resemble a corresponding measurement. Furthermore, the framework naturally provides sensitivities of the lattice deformation to the physics parameters. We highlight the utility of this framework through the application to a synthetic closed-loop inverse problem leading to the parameterization of a single crystal material model. As a model problem, we consider the dynamic response of the energetic molecular crystal, cyclotrimethylenetrinitramine (or RDX), under dynamic compression induced by simulated flyer plate impact experiments.

36 MATERIALS SCIENCE↗

Spatial Signal Detection Using Continuous Shrinkage Priors

Motivated by the problem of detecting changes in two-dimensional X-ray diffraction data, we propose a Bayesian spatial model for sparse signal detection in image data. Our model places considerable mass near zero and has heavy tails to reflect the prior belief that the image signal is zero for most pixels and large for an important subset. We show that the spatial prior places mass on nearby locations simultaneously being zero, and also allows for nearby locations to simultaneously be large signals. The form of the prior also facilitates efficient computing for large images. We conduct a simulation study to evaluate the properties of the proposed prior and show that it outperforms other spatial models. As a result, we apply our method in the analysis of X-ray diffraction data from a two-dimensional area detector to detect changes in the pattern when the material is exposed to an electric field.

97 MATHEMATICS AND COMPUTING↗

Two-level systems in nucleated and non-nucleated epitaxial alpha-tantalum films

Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. However, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, α-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of α-Ta, but here we observe the epitaxial process and present few-photon microwave loss measurements in Nb-nucleated Ta films. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of the crystalline order on quantum coherence. In both cases, films grew with Al 2 O 3 (001) ∥ Ta (110), indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 ± 0.1 × 10 -5 ) than non-nucleated (5 ± 1× 10 -6 ) in approximate proportion to defect densities as characterized by x-ray diffraction (0.27° vs 0.18° [110] reflection width) and electron microscopy (30 vs 70 nm domain size). Furthermore, the dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature α-Ta epitaxy may enable the growth of microstate-free heterostructures, which would not withstand high temperature processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unveiling microstructure-property correlations in nuclear materials with high-energy synchrotron X-ray techniques

Understanding the microstructure-property correlation is critical for the performance evaluation of in-service materials and the development of advanced materials for nuclear reactor applications. Experimental studies are challenging for nuclear materials which are often hazardous. Recent developments in high-energy synchrotron X-ray (HEX) techniques offer the potential to address this challenge, by providing direct observations of internal responses to external stimuli in bulk-like materials, through in situ or 3D measurements. Here, in this review, developments in HEX techniques are introduced and recent applications in nuclear materials are presented. The results offer unprecedented insights into materials performance and provide unique input to computational models.

36 MATERIALS SCIENCE↗

Reconstruction from limited single-particle diffraction data via simultaneous determination of state, orientation, intensity, and phase

Significance Single-particle diffraction is an emerging technique in which diffraction images are collected from individual particles, and is used to study molecular structure from multiple conformational states that may be inaccessible through other methods. However, determining structure from these experiments is challenging, since orientations and states of imaged particles are unknown and images are highly contaminated with noise. Furthermore, the number of useful images is often limited by achievable single-particle hit rates, currently around 0.1%. We introduce an iterative projection framework to simultaneously determine orientations, states, and molecular structure from limited single-particle data by leveraging structural constraints throughout the reconstruction. This framework offers a potential pathway to increasing the amount of information that can be extracted from single-particle diffraction.

97 MATHEMATICS AND COMPUTING↗

AI-enabled high-resolution scanning coherent diffraction imaging

Ptychographic imaging is a powerful means of imaging beyond the resolution limits of typical x-ray optics. Capturing recovered images from raw ptychographic data, however, requires the solution of an inverse problem, namely, phase retrieval. Phase retrieval algorithms are computationally expensive, which precludes real-time imaging. In this work, we propose PtychoNN, an approach to solve the ptychography data inversion problem based on a deep convolutional neural network. We demonstrate how the proposed method can be used to predict real-space structure and phase at each scan point solely from the corresponding far-field diffraction data. Our results demonstrate the practical application of machine learning to recover high fidelity amplitude and phase contrast images of a real sample hundreds of times faster than current ptychography reconstruction packages. Furthermore, by overcoming the constraints of iterative model-based methods, we can significantly relax sampling constraints on data acquisition while still producing an excellent image of the sample. Besides drastically accelerating acquisition and analysis, this capability has profound implications for the imaging of dose sensitive, dynamic, and extremely voluminous samples.

47 OTHER INSTRUMENTATION↗

A smart repetitive-rate wideband high power microwave source

A smart repetitive-rate wideband High Power Microwave (HPM) source based on the A6 Magnetron with Diffraction Output is described in this paper. The length of the HPM source is 30 cm and its weight is 35 kg. Computer simulations show that the source can produce microwave with central frequency of 1.91 GHz and bandwidth of about 11%. Experimental measurements show that the output microwave power from the source reaches in maximum 110 MW when the input electric power from the pulsed driver is ∼500 MW, which gives the power conversion efficiency 22%. Central frequency of the output HPM in the experiment is 1.94 GHz with the bandwidth ranging from 1.82 GHz to 2.02 GHz. The jitter of the output HPM power is lower than 3 dB when the source operates in the repetition mode with 50 Hz rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a Terrain Mapping/Crater Evolution Measurement using Diffractive Optical Elements

When landing on the moon, understanding the interaction of the engine exhaust plume with the lunar surface is critical for the success of the descent and landing flight phases. Two evaluation tools currently used are computational simulations and ground test measurements. Computational simulations require experimental measurements for comparison/validation, but ground test measurements cannot accurately emulate all aspects of an actual lunar landing; flight tests remain the only method of obtaining fully representative data. A terrain mapping/crater evolution measurement system was developed for potential inclusion on a future lander mission. This system uses two stereo cameras viewing a laser dot grid pattern projected on the ground, where the grid is created by shining a laser through one or two diffractive optical elements. CAD simulations of the stereo imaging system are first used to validate the proposed design. Laboratory testing of the system using both a large-scale fixed-geometry crater and a small-scale evolving-geometry crater validate the use of the system for terrain mapping measurements, and for its potential inclusion on a future lander mission.

Joshua M Weisberger↗

Development of a Terrain Mapping/Crater Evolution Measurement using Diffractive Optical Elements

When landing on the moon, understanding the interaction of the engine exhaust plume with the lunar surface is critical for the success of the descent and landing flight phases. Two evaluation tools currently used are computational simulations and ground test measurements. Computational simulations require experimental measurements for comparison/validation, but ground test measurements cannot accurately emulate all aspects of an actual lunar landing; flight tests remain the only method of obtaining fully representative data. A terrain mapping/crater evolution measurement system was developed for potential inclusion on a future lander mission. This system uses two stereo cameras viewing a laser dot grid pattern projected on the ground, where the grid is created by shining a laser through one or two diffractive optical elements. CAD simulations of the stereo imaging system are first used to validate the proposed design. Laboratory testing of the system using both a large-scale fixed-geometry crater and a small-scale evolving-geometry crater validate the use of the system for terrain mapping measurements. High-speed, front-illumination shadow particle tracking of particles ejected from the evolving geometry crater is also performed, demonstrating another diagnostic that can be used to further the understanding of plume-surface interactions.

Joshua M Weisberger↗

Exclusive glueball production in high-energy nucleus-nucleus collisions

The cross sections for the glueball candidates in quasireal photon-photon collisions and on central diffraction processes (i.e., double Pomeron exchange) in heavy-ion interactions at the Relativistic Heavy-Ion Collider (RHIC) and the Large Hadron Collider (LHC) are computed. The rates for these distinct production channels are compared, and they may be a fruitful approach to the investigation of glueballs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Role of Alkalis in Orchestrating Uranyl-Peroxide Reactivity Leading to Direct Air Capture of Carbon Dioxide

Spectator ions have known and emerging roles in aqueous metal-cation chemistry, respectively directing solubility, speciation, and reactivity. Here, in this work, we isolate and structurally characterize the last two metastable members of the alkali uranyl triperoxide series, the Rb + and Cs + salts (Cs-U 1 and Rb-U 1 ). We document their rapid solution polymerization via small-angle X-ray scattering, which is compared to the more stable Li + , Na + and K + analogues. To understand the role of the alkalis, we also quantify alkali-hydroxide promoted peroxide deprotonation and decomposition, which generally exhibits increasing reactivity with increasing alkali size. Cs-U 1 , the most unstable of the uranyl triperoxide monomers, undergoes ambient direct air capture of CO 2 in the solid-state, converting to Cs 4 [U VI O 2 (CO 3 ) 3 ], evidenced by single-crystal X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. We have attempted to benchmark the evolution of Cs-U 1 to uranyl tricarbonate, which involves a transient, unstable hygroscopic solid that contains predominantly pentavalent uranium, quantified by X-ray photoelectron spectroscopy. Powder X-ray diffraction suggests this intermediate state contains a hydrous derivative of CsU V O 3 , where the parent phase has been computationally predicted, but not yet synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Stability for the Pd-Si System. First-Principles, Experiments, and Solution-Based Modeling

Relative stabilities of the compounds in the binary Pd-Si system were assessed using first-principles calculations and experimental methods. Calculations of lattice parameters and enthalpy of formation indicate that Pd 5 Si-μ, Pd 9 Si 2 -α, Pd 3 Si-β, Pd 2 Si-γ, and PdSi-δ are the stable phases at 0 K (-273 °C). X-ray diffraction analyses (XRD) and electron probe microanalysis (EPMA) of the as-solidified and heat-treated samples support the computational findings, except that the PdSi-δ phase was not observed at low temperature. Considering both experimental data and first-principles results, the compounds Pd 5 Si-μ, Pd 9 Si 2 -α, Pd 3 Si-β, and Pd 2 Si-γ are treated as stable phases down to 0 K (-273 °C), while the PdSi-δ is treated as being stable over a limited range, exhibiting a lower bound. Using these findings, a comprehensive solution-based thermodynamic model is formulated for the Pd-Si system, permitting phase diagram calculation. Moreover, the liquid phase is described using a three-species association model and other phases are treated as solid solutions, where a random substitutional model is adopted for Pd-fcc and Si-dia, and a two-sublattice model is employed for Pd 5 Si-μ, Pd 9 Si 2 -α, Pd 3 Si-β, Pd 2 Si-γ, and PdSi-δ. Model parameters are fitted using available experimental data and first-principles data, and the resulting phase diagram is reported over the full range of compositions.

36 MATERIALS SCIENCE↗