SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tables, charts, and outlines of various segments within the Large Area Crop Inventory Experiment are presented. Experiment design, system implementation and operations, and data processing system design were considered.
The author has identified the following significant results. The Cement oil field, Oklahoma, was a test site for an experiment designed to evaluate LANDSAT's capability to detect an alteration zone in surface rocks caused by hydrocarbon microseepage. Loss of iron and impregnation of sandstone by carbonate cements and replacement of gypsum by calcite were the major alteration phenomena at Cement. The bedrock alterations were partially masked by unaltered overlying beds, thick soils, and dense natural and cultivated vegetation. Interpreters, biased by detailed ground truth, were able to map the alteration zone subjectively using a magnified, filtered, and sinusoidally stretched LANDSAT composite image; other interpreters, unbiased by ground truth data, could not duplicate that interpretation.
The economic experiment, the results obtained to date and the work which still remains to be done are summarized. Specifically, the experiment design is described in detail as are the developed data collection methodology and procedures, sampling plan, data reduction techniques, cost and loss models, establishment of frost severity measures, data obtained from citrus growers, National Weather Service and Federal Crop Insurance Corp. Resulting protection costs and crop losses for the control group sample, extrapolation of results of control group to the Florida citrus industry and the method for normalization of these results to a normal or average frost season so that results may be compared with anticipated similar results from test group measurements are discussed.
Space Shuttle guidance problems, solar power satellites, space law, satellite communications, space medicine, and engineering of large space systems are discussed. Topics of the papers include biological experiments designed for the Space Shuttle, an optimized guidance law for Space Shuttle re-entry, aircraft propulsion based on laser energy, industrial materials available in the lunar soil, health programs for a solar power satellite construction team, closed life support systems for large habitats in space, the advantages of a manned mission to Mars, the interpretation of radar imagery of Venus, a cost analysis for the satellite power system, and the geological history of Mars.
Thermal scanner imagery acquired during a field experiment designed to study an upwelling event in Lake Superior is investigated. Temperature data were measured by the thermal scanner, with a spatial resolution of 7 m. These data were correlated with temperatures measured from boats. One- and two-dimensional Fourier transforms of the data were calculated and temperature variances as a function of wavenumber were plotted. A k-to-the-minus-three dependence of the temperature variance on wavenumber was found in the wavenumber range of 1-25/km. At wavenumbers greater than 25/km, a k-to-the-minus-five-thirds dependence was found.
An experiment designed to measure the transformation pressure of zinc sulfide by a primary pressure method using an indentor-anvil system made of single-crystal diamond is discussed. A nonsorting electrode-grid which can be applied directly to the anvil using optical lithography is described, together with the procedures used for positioning.
The high temperature chemistry of the N-O-H-C system has been studied to determine the production of NO and CO by atmospheric lightning. The yield of NO is found to be equivalent to results obtained for a pure N2/O2 atmosphere. The CO yield is highly dependent upon the detailed cooling processes within the discharge and thus an experiment designed to measure the CO source in discharges could yield useful insights into the discharge itself. An upper limit of 3.5 x 10 to the 11th g CO per yr is estimated for the global CO source from lightning.
A flight experiment, designated Reentry F, was conducted to measure heat-transfer rates for laminar, transitional, and turbulent boundary layers on a 5 deg half-angle cone 3.962 m (13 ft) long with a preflight nose radius of 2.54 mm (0.10 in.). Data were obtained over an altitude range from 36.58 to 18.29 km (120 000 to 60 000 ft) at a flight velocity of about 6.096 km/sec (20 000 ft/sec). The nominal values of the free-stream total enthalpy, sharp-cone Mach number, and the wall-to-total enthalpy ratio were 18 MJ/kg (8000 Btu/lb), 15, and 0.03, respectively. Calculated boundary-layer edge conditions that account for effects of the entropy layer and corresponding local transition Reynolds numbers are reported in the present paper. Fully developed turbulent flow occurred with essentially constant boundary-layer edge conditions near the sharp-cone values. Transition data were obtained with local edge Mach numbers ranging from about 5.55 to 15. Transition Reynolds numbers, based on local condition, were as high as 6.6 x 10(exp 7) with an edge Mach number of about 14.4 at an altitude of 24.38 km (80 000 ft). The transition could be correlated with previous flight data taken over a Mach number range from 3 to 12 in terms of parameters including the effects of local unit Reynolds number, boundary-layer wall-to-edge enthalpy ratio, and local Mach number.
The scanning modulation collimator experiment designed to identify the optical counterparts of celestial X-ray sources is described. Identification of galactic sources is discussed. Results concerning active galaxies are presented.
Direct modulation techniques applicable to integrated optics data preprocessors were investigated. Several methods of modulating a coherent optical beam by interaction with an incoherent beam were studied. It was decided to investigate photon induced conductivity changes in thin semiconductor cladding layers on optical waveguides. Preliminary calculations indicate significant changes can be produced in the phase shift in a propagating wave when the conductivity is changed by ten percent or more. Experimental devices to verify these predicted phase changes and experiments designed to prove the concept are described.
One hundred and twenty nine cells were run through charge-discharge cycles until failure. The experiment design was a variant of a central composite factorial in five factors. Preliminary data analysis consisted of response surface estimation of life. Batteries fail under two basic modes; a low voltage condition and an internal shorting condition. A competing failure modes analysis using maximum likelihood estimation for the extreme value life distribution was performed. Extensive diagnostics such as residual plotting and probability plotting were employed to verify data quality and choice of model.
Soft errors have been induced in solid-state static RAM's by iron nuclei from the Lawrence Berkeley Laboratory (LBL) Bevalac, in experiments designed to prove the ability of iron-group cosmic rays to generate such errors. Subsequently, various delidded device types were tested in beams of argon and krypton ions from the LBL 88-inch Cyclotron, at energies near 2 MeV/nucleon. The latter tests showed that some devices are essentially immune to bit error while others are quite susceptible. Good agreement was obtained with model predictions in cases where the latter exist. Latchup, whose cause is attributed to individual heavy ions, was also observed in some device types.
Some different approaches to the problem of designing experiments which estimate the parameters of nonlinear models are discussed. The assumption in these approaches that the information in a set of data can be represented by a scalar is criticized, and the nonscalar discrimination information is proposed as the proper measure to use. The two-step decay example in Box and Lucas (1959) is used to illustrate the main points of the discussion.
Equilibrium shapes and stability of rotating drops held together by surface tension are found by computer-aided analysis that uses expansions in finite-element basis functions. Shapes are calculated as extrema of appropriate energies. Stability and relative stability are determined from curvatures of the energy surface in the neighborhood of the extremum. Families of axisymmetric, two-, three-, and four-lobed drop shapes are traced systematically. Bifurcation and turning points are located and the principle of exchange of stabilities is tested. The axisymmetric shapes are stable at low rotation rates but lose stability at the bifurcation to two-lobed shapes. Two-lobed drops isolated with constant angular momentum are stable. The results bear on experiments designed to further those of Plateau (1863).
This paper discusses an error analysis for the Stanford Relativity experiment, designed to measure the precession of a gyroscope's spin-axis predicted by general relativity. Measurements will be made of the spin-axis orientations of 4 superconducting spherical gyroscopes carried by an earth-satellite. Two relativistic precessions are predicted: a 'geodetic' precession associated with the satellite's orbital motion and a 'motional' precession due to the earth's rotation. Using a Kalman filter covariance analysis with a realistic error model we have computed the error in determining the relativistic precession rates. Studies show that a slightly off-polar orbit is better than a polar orbit for determining the 'motional' drift.
A satellite experiment, designed to measure potential charging of typical thermal-control materials at near-geosynchronous altitude, was flown as part of the Spacecraft Charging at High Altitudes program. Direct observations of charging of typical satellite materials in a natural charging event (greater than or equal to 5 keV) are presented. The results show some features which differ significantly from previous laboratory simulations of the environment.
The data processing system for scientific experiments on stations of the "Prognoz" type provides for the processing sequence to be broken down into a number of consecutive stages: preliminary processing, primary processing, secondary processing. The tasks of each data processing stage are examined for an experiment designed to study gamma flashes of galactic origin and solar flares lasting from several minutes to seconds in the 20 kev to 1000 kev energy range.
The state of the art of active controls technology (ACT) and a recommended ACT development program plan are reviewed. The performance benefits and cost of ownership of an integrated application of ACT to civil transport aircraft is to be assessed along with the risk and laboratory and/or flight experiments designed to reduce the technical risks to a commercially acceptable level.