Results for “data needs” — Page 39

NASA NTRS2016

The EST Model for Predicting Progressive Damage and Failure of Open Hole Bending Specimens

Progressive damage and failure in open hole composite laminate coupons subjected to flexural loading is modeled using Enhanced Schapery Theory (EST). Previous studies have demonstrated that EST can accurately predict the strength of open hole coupons under remote tensile and compressive loading states. This homogenized modeling approach uses single composite shell elements to represent the entire laminate in the thickness direction and significantly reduces computational cost. Therefore, when delaminations are not of concern or are active in the post-peak regime, the version of EST presented here is a good engineering tool for predicting deformation response. Standard coupon level tests provides all the input data needed for the model and they are interpreted in conjunction with finite element (FE) based simulations. Open hole bending test results of three different IM7/8552 carbon fiber composite layups agree well with EST predictions. The model is able to accurately capture the curvature change and deformation localization in the specimen at and during the post catastrophic load drop event.

damage↗

NASA NTRS2017

Design Guide for Aerodynamics Testing of Earth and Planetary Entry Vehicles in a Ballistic Range

The purpose of this manual is to aid in the design of an aerodynamics test of an earth or planetary entry capsule in a ballistic range. In this manual, much use is made of the results and experience gained in 50 years of ballistic range aerodynamics testing at the NASA Ames Research Center, and in particular, that gained in the last 27 years, while the author was working at NASA Ames. The topics treated herein include: Data to be obtained; flight data needed to design test; Reynolds number and dynamic similarity of flight trajectory and ballistic range test; capabilities of various ballistic ranges; Calculations of swerves due to average and oscillating lift and of drag-induced velocity decreases; Model and sabot design; materials, weights and stresses; Sabot separation; Launches at angle of attack and slapping with paper to produce pitch/yaw oscillations.

Test Design↗

NASA NTRS2017

NASA-STD-6001B Test 1 Upward Flame Propagation; Sample Length Impact on MOC Investigation

Understanding the combustion behavior of materials in the elevated oxygen environments of habitable spacecraft is of utmost importance to crew safety and mission success. Currently, certification for unrestricted flight usage of a material with respect to flammability involves passing the Upward Flame Propagation Test of NASA-STD-6001B (Test 1). This test evaluates materials in a standardized test configuration for two failure criteria: self-extinguishment within 15 cm (6 in.) and the propensity of flame propagation by means of flaming material transfer. By the NASA standard, full-length samples are 30 cm (12 in.) in length; however, factors independent of the test method such as limited material availability or various nonstandard test configurations limit the full pretest sample lengths available for test. This paper characterizes the dependence, if any, of pretest sample length on NASA-STD-6001B Test 1 results. Testing was performed using the Maximum Oxygen Concentration (MOC) Threshold Method to obtain a data set for each sample length tested. In addition, various material types, including cloth (Nomex), foam (TA-301) and solids (Ultem), were tested to investigate potential effects of test specimen types. Though additional data needs to be generated to provide statistical confidence, preliminary findings are that use of variable sample lengths has minimal impact on NASA-STD-6001B flammability performance and MOC determination.

Harper, Susana Tapia↗

NASA NTRS2017

Communications for UAS Integration in the NAS Phase 2 Satellite Communications and Terrestrial Extension

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the command and control communications link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, with national and international standards to enable interoperability and certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications, supported by national and international standards, are required for integrated UAS operations. The National Aeronautics and Space Administration (NASA) has undertaken an extensive technology development and test program in order to provide the required technical data needed to enable C2 standards development. NASAs UAS Integration in the National Airspace System (NAS), or UAS in the NAS Project, included as a major element the Command and Control Communications (C2) Subproject, based at NASAs Glenn Research Center. The successful first phase of the C2 Subproject, completed during 2012-2016, focused primarily on line-of-sight communications. Accomplishments included air-ground channel propagation characterization and modeling; CNPC prototype radio development; CNPC radio flight testing; satellite communications spectrum study and interference analysis; and development of C2 LOS communications standards development. The second phase of the C2 Subproject will focus primarily on beyond-line-of-sight communications, although a follow-on activity for terrestrial LOS communications, known as Terrestrial Extension, is also included. In addition to the terrestrial element, Phase 2 also includes technology development and testing activities for Ka-Band BLOS C2 Satellite Communications; Ku-Band BLOS C2 Satellite Communications; Ku-Band Interference and Propagation; and C-Band Satellite Communications. This paper will provide brief overviews of the C2 Subproject and its Phase I accomplishments, followed by a description of the plans for the C2 Subproject Phase 2.

radiofrequency spectrum↗

NASA NTRS2017

Communications for UAS Integration in the NAS Phase 2 - Satellite Communications and Terrestrial Extension

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the command and control communications link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, with national and international standards to enable interoperability and certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications, supported by national and international standards, are required for integrated UAS operations. The National Aeronautics and Space Administration (NASA) has undertaken an extensive technology development and test program in order to provide the required technical data needed to enable C2 standards development. NASAs UAS Integration in the National Airspace System (NAS), or UAS in the NAS Project, included as a major element the Command and Control Communications (C2) Subproject, based at NASAs Glenn Research Center. The successful first phase of the C2 Subproject, completed during 2012-2016, focused primarily on line-of-sight communications. Accomplishments included air-ground channel propagation characterization and modeling; CNPC prototype radio development; CNPC radio flight testing; satellite communications spectrum study and interference analysis; and development of C2 LOS communications standards development. The second phase of the C2 Subproject will focus primarily on beyond-line-of-sight communications, although a follow-on activity for terrestrial LOS communications, known as Terrestrial Extension, is also included. In addition to the terrestrial element, Phase 2 also includes technology development and testing activities for Ka-Band BLOS C2 Satellite Communications; Ku-Band BLOS C2 Satellite Communications; Ku-Band Interference and Propagation; and C-Band Satellite Communications. This paper will provide brief overviews of the C2 Subproject and its Phase I accomplishments, followed by a description of the plans for the C2 Subproject Phase 2.

radiofrequency spectrum↗

NASA NTRS2017

Building Aerodynamic Databases for the SLS Design Process

NASA's new Space Launch System (SLS) will be the first rocket since the Saturn V (1967-1973) to carry astronauts beyond low earth orbit-and will carry 10% more payload than Saturn V and three times the payload of the space shuttle. The SLS configuration consists of a center core and two solid rocket boosters that separate from the core as their fuel is exhausted two minutes after lift-off. During these first two minutes of flight, the vehicle powers its way through strong shock waves as it accelerates past the speed of sound, then pushes beyond strong aerodynamic loads at the maximum dynamic pressure, and is ultimately enveloped by gaseous plumes from the booster-separation motors. The SLS program relies on computational fluid dynamic (CFD) simulations to provide much of the data needed to build aerodynamic databases describing the structural load distribution, surface pressures, and aerodynamic forces on the vehicle.

Aerodynamic↗

NASA NTRS2018

Project NEO Specific Impulse Testing Solutions

The Neo test stand is currently configured to fire a horizontally mounted rocket motor with up to 6500 lbf thrust. Currently, the Neo test stand can measure flow of liquid propellant and oxidizer, pressures residing in the closed system up to the combustion chamber. The current configuration does not have the ability to provide all data needed to compute specific impulse. This presents three methods to outfit the NEO test fixture with instrumentation allowing for calculation of specific impulse.

oxygen↗

NASA NTRS2019

Turning SWIM Data into Consistent Reports for Analysts and Users

ATD-2 relies on, and generates, huge amounts of data. However, this raw data needs to be collected and converted into useful information for operational analysis. In this presentation, we describe the efforts undertaken on the ATD-2 project to generate various reports to support project analysis and user needs.

SWIM↗

NASA NTRS2019

How Do UTLS Jet and Tropopause Dynamics Influence Ozone Variability? Investigations Supporting the SPARC OCTAV-UTLS Activity

Understanding changes in UTLS ozone is exceptionally challenging because of large spatial and temporal variability and because of the difficulty of satellite measurements in the UTLS. It is also exceptionally important: for example, to understand climate impacts of radiatively active substances and to understand physical and biological effects of pollution transport and stratosphere-troposphere exchange (STE). Multi-decadal global observations of UTLS ozone are now available from numerous satellite platforms, as well as local and regional observations from aircraft, balloons, and lidar. The upper tropospheric (UT) jets and tropopauses are important drivers of composition variability in the UTLS, acting as transport barriers and controlling STE and long-range transport. We report here on investigations of relationships between extratropical UTLS ozone variability and dynamical diagnostics of mixing / transport barriers, Rossby Wave breaking, and stratosphere-troposphere exchange. We will view these relationships in the context of ozone mapped into dynamical coordinates with respect to the UTLS jets and / or the tropopause. This work will help provide direction for analyses within the Stratosphere-troposphere Processes And their Role in Climate (SPARC) Observed Composition Trends and Variability in the UTLS (OCTAV-UTLS) activity, which aims to use dynamical coordinate mapping to help detect and attribute observed UTLS composition trends, and to project future data needs to better quantify those trends. The work we report on here will focus on satellite ozone observations (primarily from the Aura Microwave Limb Sounder, additionally from ACE-FTS and OSIRIS) and assimilated ozone and dynamical fields (from multiple reanalyses); we will also provide some examples of comparisons with aircraft and balloon observations.

Manney, Gloria L.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-33601-DND

The Clouds and the Earth's Radiant Energy System (CERES) project now has over 18 years of an accurately observed top-of-the-atmosphere (TOA) flux record for climate monitoring and diagnostic studies. CERES provides the climate community the following parameters: coincident instantaneous 1? gridded CERES observed TOA fluxes, computed profile and surface fluxes, as well as MODIS cloud and aerosol retrievals. Clouds and radiation interaction one key factor that dominates climate feedbacks and is also the most difficult problem with large uncertainty. To further advance our understanding of the cloud-radiation interaction, the climate community need data with accurate fluxes and their associated cloud properties for both observational and modelling study. The new CERES FluxByCldTyp data product is produced for this purpose. The flux product combines for the first time CERES measured TOA fluxes along with the associated MODIS cloud properties, which links radiative flux directly to a specific cloud type. This was achieved by computing sub-footprint fluxes for the clear-sky and cloudy portions of the CERES footprint. The spatially distributed cloud properties within the CERES footprint were retrieved from 2-km MODIS pixels, that were stratified by cloud type. The sub-footprint fluxes were estimated from MODIS radiances based on empirically derived narrowband to broadband coefficients. The combined sub-footprint fluxes can then be validated with the observed footprint flux. This presentation will focus on the algorithm development of the flux-by-cloud-type product and its validation.

Moguo Sun↗

NASA NTRSDate not supplied

TPSAS-NF1676L-33753-DND

The Clouds and the Earth's Radiant Energy System (CERES) project now has over 18 years of an accurately observed top-of-the-atmosphere (TOA) flux record for climate monitoring and diagnostic studies. CERES provides the climate community the following parameters: coincident instantaneous 1 gridded CERES observed TOA fluxes, computed profile and surface fluxes, as well as MODIS cloud and aerosol retrievals. Clouds and radiation interaction one key factor that dominates climate feedbacks and is also the most difficult problem with large uncertainty. To further advance our understanding of the cloud-radiation interaction, the climate community need data with accurate fluxes and their associated cloud properties for both observational and modelling study. The new CERES FluxByCldTyp data product is produced for this purpose. The flux product combines for the first time CERES measured TOA fluxes along with the associated MODIS cloud properties, which links radiative flux directly to a specific cloud type. This was achieved by computing sub-footprint fluxes for the clear-sky and cloudy portions of the CERES footprint. The spatially distributed cloud properties within the CERES footprint were retrieved from 2-km MODIS pixels, that were stratified by cloud type. The sub-footprint fluxes were estimated from MODIS radiances based on empirically derived narrowband to broadband coefficients. The combined sub-footprint fluxes can then be validated with the observed footprint flux. This presentation will focus on the algorithm development of the flux-by-cloud-type product and its validation. The paper will also discuss CERES FlxbyCldTyp simulator and its application.

Moguo Sun↗

NASA NTRS2011

TPSAS-NF1676L-12354-DND

This work deals with performance properties of a dynamic traffic model, the Air Traffic Monotonic Lagrangian Grid (ATMLG), which can be used to evaluate new control strategies for conflict avoidance, separation assurance, and traffic management. The model is based on an algorithm and data structure called the Monotonic Lagrangian Grid (MLG), originally developed at NRL in the mid 1980s and since then used as an underpinning for various particle dynamics simulations. The MLG stores positions and other data needed to describe N moving objects, where N can be very large. The MLG algorithm involves sorting and ordering objects. A stationary grid is an alternative to the dynamic grid of MLG. Stationary grids can be attractive in that they do not require sorting. We investigate and report on the relative performances of air traffic simulations based on dynamic (MLG) and static (lat-long) grids.

C Kaplan↗

NASA NTRS2011

TPSAS-NF1676L-12301-DND

This work deals with performance properties of a dynamic traffic model, the Air Traffic Monotonic Lagrangian Grid (ATMLG), which can be used to evaluate new control strategies for conflict avoidance, separation assurance, and traffic management. The model is based on an algorithm and data structure called the Monotonic Lagrangian Grid (MLG), originally developed at NRL in the mid 1980s and since then used as an underpinning for various particle dynamics simulations. The MLG stores positions and other data needed to describe N moving objects, where N can be very large. The MLG algorithm involves sorting and ordering objects. A stationary grid is an alternative to the dynamic grid of MLG. Stationary grids can be attractive in that they do not require sorting. We investigate and report on the relative performances of air traffic simulations based on dynamic (MLG) and static (lat-long) grids.

Carolyn Kaplan↗

NASA NTRS2010

NASA 2009 HyspIRI Science Workshop Report

From August 11 13, 2009, NASA held a three-day workshop to consider the Hyperspectral Infrared Imager (HyspIRI) mission recommended for implementation by the 2007 report from the U.S. National Research Council Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond (also known as the Earth Science Decadal Survey or, simply, the Decadal Survey). The open workshop provided a forum to present the observational requirements for the mission and assess its anticipated impact on scientific and operational applications; the open forum also offered the opportunity to obtain feedback from the broader scientific community on the mission concept. The workshop participants concluded that the HyspIRI mission would provide a significant new capability to study ecosystems and natural hazards at spatial scales relevant to human resource use. In addition, participants reviewed the Draft Preliminary HyspIRI Mission Level 1 Requirements and confirmed that they were achievable with the mission concept presented and would provide the necessary data needed to address the science questions identified for the mission and by the Decadal Survey. These requirements could be met using the reference instrument designs and be implemented through the use of current technology. The workshop participants, like the Decadal Survey itself, strongly endorsed the need for the HyspIRI mission and felt the mission, as defined, would accomplish the intended science.

Oaida, Bogdan V.↗

NASA NTRS2022

A Long-Lived Lander for Venus Surface Insitu Science

Earth’s sister planet, Venus, continues to hide important scientific clues about our solar system, terrestrial planets around other stars, and about our home planet as well. Venus was the first planet human-built spacecraft have flown by, several missions have orbited around it and many short-duration landers operated have landed on it, yet there are still many important and basic science questions that need answering about this mysterious body. This fact exists because the planet poses significant challenges to acquiring the needed data when relying on tradition planetary spacecraft design approaches. This presentation will provide a short background, description, and status of a project that is taking a novel approach to meet some of the Venus challenges and prepare NASA to address the key science questions about its climate, surface, and eventually interior.

Venus↗

NASA NTRSDate not supplied

Scale Resolving Jet Simulations to Reduce Airport Noise

- An emerging potential market has generated renewed interest in civil supersonic aircraft - Evidenced by the appearance of several commercial programs despite lack of standards for en route noise or landing and takeoff noise - Overland Flight Restrictions based on unacceptable sonic boom noise are viewed as the main barrier to this vision - National Research and Policy agencies play a central role in developing the data needed for the regulation change that is essential to enabling this new market - The vision of the Supersonics Community is a future where fast air travel is available for a broad spectrum of the traveling public - Future supersonic aircraft will not only be able to fly overland without creating an “unacceptable situation” but compared to Concorde and SST will be efficient, affordable, and environmentally responsible

ARMD↗

NASA NTRS2023

Dynamically Rendering Rough Terrain with Minimal Memory Overhead

Rendering highly detailed terrain is a process with the potential to consume a great deal of a computer’s random access memory (RAM). In a browser-based application, this resource is limited even further, leading to the necessity to use alternative methods of rendering the large amount of data needed for high detail. This report describes one such method that places the onus of rendering on the speed of the graphics processing unit (GPU) rather than on the computer’s memory. By removing attribute buffers, which contribute greatly to memory costs, from the rendering pipeline and generating the requisite attributes on the fly using a heightmap texture instead, it is estimated that memory usage can be cut down to one-sixth that of the previous method.

Visualization↗

NASA NTRSDate not supplied

High Temperature Testing of Refractory Alloys

- NASA Refractory Alloy Projects: - STMD-GRC – Refractory Alloy Additive Manufacturing Build Optimization (RAAMBO) - Hypersonic Technology (HTP) Project. - Advance material characterization and prototypic testing allowing for critical data needed to demonstrate TRL advancement and for component flight qualification - Enable national supply chain for refractory alloy feedstock essential for production of historical to custom alloys for R&D to component fabrication. - Develop materials and processing for high performance in extreme environments enabling technologies for Moon to Mars missions.

Justin L. Milner↗