Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Design Overview of a High-Pressure Helium Flow Visualization Apparatus for Blanket Cooling Studies

Cooling of the fusion blanket first wall remains a significant challenge given the adverse conditions of heat and particle flux encountered near the plasma. Helium emerges as an attractive cooling candidate because of its chemical and neutronic inertness and separability from hydrogenic species (e.g. tritium). Because of the low thermal mass of helium, optimization of these coolant channels is warranted to provide high heat transfer performance at low pumping costs. Increasingly, computational fluid dynamics (CFD) simulations are employed to model and optimize these flow channels, and accompanying experimental data are needed to validate the predictions of these models. To provide the aforementioned experimental data, a high-pressure helium flow visualization upgrade has been designed for the Helium Flow Loop Experiment facility. This apparatus was built to American Society of Mechanical Engineers boiler and pressure vessel standards to withstand operating pressure of 4 MPa and mated to high-pressure glass windows. Seedless flow visualization is performed via high-speed background oriented schlieren (BOS), with image correlation used for time-resolved two-dimensional velocimetry at frequencies in excess of 60 kHz. Rectangular flow channel test articles are additively manufactured via laser powder bed fusion and installed into this visualization apparatus, with one-sided heating supplied by resistive heaters. In conclusion, the chosen test geometries were informed by prior CFD simulations, and the helium flow structures observed via BOS (detachment, recirculation, etc.) will be used for the validation of these accompanying models, in support of the design and optimization of blanket cooling channel configurations.

Helium flow↗

Analyzing the Multiscale Impacts of Implementing Energy-Efficient HVAC Improvements Through Energy Audits and Economic Input–Output Analysis

Abstract Heating, ventilation, and air-conditioning (HVAC) systems are usually an industry’s highest consumer of energy, most of which goes toward space cooling in buildings. Industrial energy-efficiency audits not only benefit manufacturers but also generate significant economic and environmental benefits to localities, states, and the nation. This article analyzes the micro- and macro scale impacts of implementing energy-efficient HVAC systems by integrating the industrial building energy data with the macroeconomic regional economic flow model. Micro-scale data include 10 years of historical energy, cost, and carbon dioxide savings achieved from energy-efficient HVAC implementation offered to manufacturers through industrial energy audits. The data were integrated into the macroeconomic modeling framework to illuminate the cascading regional economic impacts of implementing energy-efficient HVAC recommendations in manufacturing facilities. Results show that if recommendations had been implemented throughout all manufacturers in the region, $656 M energy costs would have been directly saved, 7.8 million metric tons of carbon dioxide emissions would have been avoided, and 4387 jobs could have been created, resulting in a total annual economic impact of $899 M stemming from direct, indirect, and induced impacts. The results offer insight into how industrial energy systems can be designed and provide models for how communities can accomplish a net-zero society.

Energy & Fuels↗

AOI-2, A Novel Access Control Blockchain Paradigm for Cybersecure Sensor Infrastructure in Fossil Power Generation Systems

Fossil power generation systems are increasingly vulnerable to attack from both cybercriminals as well as internal threats. These vulnerabilities demand that emerging technologies such as blockchains be utilized to secure the data involved in the information flows within the Supervisory Control and Data Acquisition (SCADA) systems of the fossil power generation plants. The publicly accessible blockchain protocols, although secure, are visible to everyone. Even private blockchains currently are unable to support different levels of access to different participants, which is a critical requirement for the existing SCADA systems running the power plants. In light of the above, novel blockchain protocols that are specifically adapted to fossil power generation environments need to be developed in order to achieve the goal of cybersecure sensor networks. In this work, we address this question by creating a novel blockchain technology, namely smart private ledger, for cybersecure communication within the fossil power generation systems. A lab-scale sensor network consisting of strain and temperature sensors is constructed to develop the ledger. The technology has hierarchical access control which is compatible with the existing SCADA systems in fossil power plants. The sensor data is used with cryptographic digital signatures and secret sharing protocols within the nodes of the blockchain technology. The research results will lead to cybersecurity for machine-to-machine interactions, infrastructure for secure data logging for sensors, decentralized data storage, and second-layer technologies for high volume machine-to-machine interactions in the power plants. The work aims to largely address the concerns for the security of distributed sensor networks in such systems that can be compromised by insider threats and by cybercriminals. The research has led to the training of the next generation of engineers and scientists in the important areas of sensor engineering and blockchain technology.

01 COAL, LIGNITE, AND PEAT↗

Oregon Rivers Characterization Tool

DHS’s Regional Resiliency Assessment Program (RRAP) undertook the Oregon State Transportation Systems RRAP project between 2018-2021 to assess the seismic vulnerabilities of the state’s transportation system to a Cascadia Subduction Zone (CSZ) earthquake (CISA 2021). The project primarily focused on the effects of a CSZ earthquake on the mobility of emergency response efforts into the region. In the event that bridges located at crucial river crossings fail during a CSZ earthquake, rivers will become natural barriers affecting the ability to support response and recovery efforts. The characteristics of rivers (e.g., width, depth, and flow) are critical data to inform planning for the recovery of transportation systems across river barriers and determine reopening times following a CSZ earthquake. As part of the transportation system assessment, an Argonne National Laboratory (Argonne) project team developed a River Characterization Tool (RCT) to quantify the physical characteristics of the river system in Oregon, which can be used to inform a system-level analysis of transportation recovery and reopening times. This report mainly discusses approaches, methods, development, and applications of the RCT. The use of the river data generated from this tool for a system-level analysis of transportation recovery is discussed in the Oregon Transportation Systems RRAP Resiliency Assessment report (CISA 2021). The primary goal of the RCT is to generate statewide dataset of widths, depths, and flows for all rivers across Oregon to assess the effects of river barriers on emergency response and recovery efforts following a CSZ earthquake. The RCT leverages remote sensing data that multispectral sensors collect from satellites, employs a deep learning model to characterize river predictions, and computes river channel geometric dimensions with hydraulic relationships and river predictions. The entire process of river characterization is automated and implemented through the RCT.

58 GEOSCIENCES↗

3-D Geological Modeling for Numerical Flow Simulation Studies of Gas Hydrate Reservoirs at the Kuparuk State 7-11-12 Pad in the Prudhoe Bay Unit on the Alaska North Slope

Accurate reservoir evaluation requires reliable three-dimensional (3-D) geological models. Here, this study conducted 3-D geological modeling for numerical flow simulation of the B1 sand gas hydrate reservoir at the Kuparuk State 7-11-12 pad, Prudhoe Bay Unit, Alaska North Slope. The model integrates well logs, core, and seismic data to address spatial heterogeneity in geological structures and reservoir properties. Two modeling types were performed: structural framework modeling and petrophysical property modeling. For structural framework modeling, seismic data and well log markers were used to reproduce subsurface structures characterized by a normal fault system. A volume-based modeling algorithm and stair-stepping grid were applied. The resulting 3-D model comprised 2,640,000 grid cells across 264 layers, including seven fault grids. For petrophysical property modeling, total porosity was initially modeled using sequential Gaussian simulation with collocated cokriging. To reproduce the upward coarsening of the B1 sand, upscaled log-derived total porosity and a three-dimensional (3-D) trend depicting total porosity variation were used as primary and secondary data, respectively. Gas hydrate saturation distribution was modeled similarly, with secondary data from estimated porosity distribution and seismic-derived acoustic impedance map enhancing accuracy. Results indicate higher gas hydrate saturation in the upper part of the B1 sand and areas with higher acoustic impedance. Intrinsic permeability was modeled from the total porosity and clay-bound water volume, and effective permeability was derived from the gas hydrate saturation and intrinsic permeability distributions based on the “Tokyo model”. Effective permeability distributions were influenced by the total porosity, gas hydrate saturation, and intrinsic permeability. Within the same layer, higher gas hydrate saturation leads to decreased effective permeability. In total, 100 sets of multiple scenarios were prepared, providing input data for dynamic flow simulations to evaluate the effects of lateral heterogeneity in reservoir properties and the hydraulic characteristics of faults on production behavior for preassessment before the long-term production test.

58 GEOSCIENCES↗

Fate and transport of contaminants at soils sites - 15512

As part of the Soils Activity of the Environmental Management Operations at the NNSA, Nevada Field Office, radionuclide-contaminated Soils sites will undergo regulatory closure in accordance with the 1996 Nevada Federal Facilities Agreement and Consent Order. One closure alternative that has been evaluated for each Soils site has been -closure-in-place- with fencing and posting, along with administrative controls. However, potential disturbance agents for radionuclide-contaminated soils left in place are possible erosion and transport by wind and water. Previous work with radionuclide-contaminated soils has indicated that the highest activity levels of Pu tend to be found in the fine sands, silts, or clays, which are the most likely particle sizes to be transported by wind re-suspension, and by runoff flow events. Monitoring and sampling stations have been deployed at specific Soils sites to collect meteorological data, airborne particulate filter samples, and both suspended and bed-load sediment transport samples during and after runoff flow events, as needed. The primary objective of the air monitoring and sampling stations is to evaluate whether there is wind transport of radionuclide-contaminated soils from Soils sites. The primary objective of the precipitation and runoff flow data collection, as well as both suspended and bed-load sediment sampling, is to determine during which rainfall events (i.e., precipitation return interval, duration, and intensity) radionuclide-contaminated soils are likely to be transported. The NNSS continues to demonstrate compliance with US DOE Order 458.1 for the Radiation Protection of the Public and the Environment, as reported in annual environmental reports. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EGS Collab Experiment 2: Shear Stimulation ERT Monitoring Data

This repository contains the electrical resistivity tomography (ERT) monitoring data that was collected before, during, and after shear stimulation attempts were conducted at EGS Collab. These tests were carried out on the SURF 4100 level during Experiment 2 in March, 2022. Flow and stimulation data corresponding to this dataset are available in a different GDR dataset, which is linked below. Also included here are the E4D input files that were used to process the ERT data. E4D is an open source ERT monitoring and inversion code which is linked for use below.

15 GEOTHERMAL ENERGY↗

INGENIOUS Thermal Conductivity Measurement Source Categorization

Thermal conductivity (TC) data taken for different wells at a specified drill depth. This is an abridged version of the complete SMU heat flow database, downloaded from the SMU node of the NGDS at the beginning of INGENIOUS (approximately April 2021), and filtered to the INGENIOUS study area. This National Geothermal Data System (NGDS) project aggregates geothermal data collected and curated by the SMU Geothermal Laboratory and its partner organizations. All columns in this database are the same as the SMU database, except for 2 additions associated with this project. Repeated columns are for data correlation purposes. Column descriptions and data types are the same as previous iterations of the SMU database. The new values that are the addition are two new columns developed as part of the INGENIOUS project: INGENIOUS TC Value | INGENIOUS notes INGENIOUS notes are individual notes that were written for specific data points during the analysis process. There are not always notes associated with each input value. INGENIOUS TC Value includes 4 values: 1. Assumed Measured These are values that are assumed to be measured thermal conductivity values, either within a specific well or within the same study region. Many of these have either a published reference, a reported standard deviation, or a unique thermal conductivity value. 2. Data release - assumed measured These are values in the SMU database that are from proprietary data that were added to the SMU database and are labeled as data release for their reference. These values were searched for in person at the SMU Geothermal Laboratory as well as virtual examination of data available on the NGDS. For many of these, there are reported thermal conductivity values associated with the heat flow data in the database, but no specific table or reference to measurements in the original data release files. 3. Known measured These are values that have a reported measurement, either as an original file in the SMU data files on the NGDS or a reported table in a publication. In the rare circumstances, Maria Richards or David Blackwell confirmed measurement. Confirmation of measurement would be written in the INGENIOUS notes column. 4. Unmeasured Unmeasured values are those that are known to be unmeasured, either estimated from another report or no information given. In the SMU database, there are wells that have a heat flow but no thermal conductivity. These are categorized as unmeasured. There are also heat flow values that are stated to have estimated or generalized average thermal conductivity values for the region and rock type. Because these are known to be unmeasured, they are categorized as such. 5. Blank Blank values are either A quality or X quality. These quality values are stated in the INGENIOUS notes. These values were not going to change associated with the heat flow analysis, so these were not examined.

15 GEOTHERMAL ENERGY↗

Nano-Scale Hydroxyapatite: Synthesis, Two-Dimensional Transport Experiments, and Application for Uranium Remediation

Synthetic nano-scale hydroxyapatite (NHA) was prepared and characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods. The XRD data confirmed that the crystalline structure and chemical composition of NHA correspond to Ca 5 OH(PO 4 ) 3 . The SEM data confirmed the size of NHA to be less than 50 nm. A two-dimensional physical model packed with saturated porous media was used to study the transport characteristics of NHA under constant flow conditions. The data show that the transport patterns of NHA were almost identical to tracer transport patterns. This result indicates that the NHA material can move with water like a tracer, and its movement was neither retarded nor influenced by any physicochemical interactions and/or density effects. We have also tested the reactivity of NHA with 1 mg/L hexavalent uranium (U(VI)) and found that complete removal of U(VI) is possible using 0.5 g/L NHA at pH 5 to 6. Our results demonstrate that NHA has the potential to be injected as a dilute slurry for in situ treatment of U(VI)-contaminated groundwater systems.

Kanel, S. R.↗

Code for the manuscript "Mori-Zwanzig Modal Decomposition"

We would like to create an open source repository in LANL's github on code written in Julia, in which we implement and extend the data-driven Mori-Zwanzig method for extracting large-scale spatio-temporal structures from data, which we call MZMD. This method is an extension of Dynamic Mode Decomposition (DMD) in which Mori-Zwanzig memory kernels are included into the associated companion matrix. In the code we would like to release, we apply MZMD to a flow over a cylinder with Reynolds number 100 rather than the much larger data set used in the associated manuscript. DMD is used extensively in the fluid dynamics community mainly for extracting large scale spatio-temporal structures (patters) from flow data. This is useful for understanding the key mechanisms that generate certain complex dynamical process relevant in engineering design. In MZMD, we improve upon DMD by adding the Mori-Zwanzig memory kernels, and show this improvement is especially important in strongly nonlinear regions of the flow.

Woodward, Michael↗

In-Network DAQ Functions

A revolution in networking is changing how we compute, but we lack the tools that can channel this new capability to benefit science. It is now possible to write programs that operate "in" the network—on network cards (NICs) and network switches themselves, rather than on servers. These programs can analyze and reduce huge volumes of data as they flow through the network—at higher throughput, lower latency, and lower power consumption than if servers (containing CPUs or GPUs) were used. That equipment offers appealing features for scientific experiments that involve huge quantities of data. This poster describes a prototype LArTPC raw-waveform hit finder based on DUNE’s Trigger Primitives generator. We built this as part of ongoing research to better understand how to put programmable network hardware to use in large scientific experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-Resolved PIV Measurements of Flow Field at the Exit of a Diffuser Mounted on a Rotating Detonation Combustor

Time-resolved particle image velocimetry at 30 kHz is applied to the exhaust flow field of a RDC system configured with a diffuser geometry and a converging-diverging (CD) nozzle. The RDC is operated with methane fuel and oxygen-enriched air, motivated by power generation applications. The measured flow-field is discretized into axial and non-axial velocity components. Results are shown to characterize the flow-field across a cord length at the exit plane. Instantaneous contours of the two velocity components, and 1D histograms of velocity components, and 2D histograms of total velocity and tilt angle are shown at multiple locations in the flow. Repeatability of the data is evaluated by comparing tests conducted at similar flow rates. Results are presented for a baseline test case, and test cases showing the effect of reactant higher flow rate and CD nozzle geometry. Finally, the results are compared to a previous RDC study without the diffuser to compare the effectiveness of the diffuser and CD nozzle designs in mitigating the flow periodicity at the combustor exit.

particle image velocimetry, pressure gain combusti↗

Oil Filled Flow Shield Performance Evaluation

When hydrophones are used to monitor underwater sound in areas with currents, like rivers or tidal channels, flow noise caused by turbulent flow past a hydrophone can mask low frequency acoustic signals of interest. Flow shields can reduce the impacts of flow noise on hydrophone data. A prior study conducted by PNNL compared three flow shield designs and determined that an oil-filled urethane shield performed better than other designs and was likely sufficiently robust for long-duration marine deployments. However, that study did not assess the high frequency performance of the oil-filled flow shield or conduct long-duration field testing. Further, the prototype flow shield was difficult to assemble. This report details the results of design refinement and testing to address these gaps. Design refinements resulted in a straightforward and repeatable assembly method. Field testing indicated that the flow shields reduce flow noise by over 20 dB below 50 Hz at flow speeds greater than 0.5 m/s and are proven to survive deployments more than 6 months long. Calibration of the same hydrophone with and without a flow shield installed indicated that the shields attenuate propagating sound by no more than 2 dB at frequencies below 30 kHz.

42 ENGINEERING↗

Time-Resolved PIV Measurements of Flow Field at Diffuser Exit Downstream of a Rotating Detonation Combustor

Time-resolved particle image velocimetry at 30 kHz is applied to the exhaust flow field of a RDC system configured with a diffuser geometry and a converging-diverging (CD) nozzle. The RDC is operated with methane fuel and oxygen-enriched air, motivated by power generation applications. The measured flow-field is discretized into axial and non-axial velocity components. Results are shown to characterize the flow-field across a cord length at the exit plane. Instantaneous contours of the two velocity components, and 1D histograms of velocity components, and 2D histograms of total velocity and tilt angle are shown at multiple locations in the flow. Repeatability of the data is evaluated by comparing tests conducted at similar flow rates. Results are presented for a baseline test case, and test cases showing the effect of reactant higher flow rate and CD nozzle geometry. Finally, the results are compared to a previous RDC study without the diffuser to compare the effectiveness of the diffuser and CD nozzle designs in mitigating the flow periodicity at the combustor exit.

03 NATURAL GAS↗

Predicting roughness effects in additively manufactured coolant channels with helical enhancements

Additive manufacturing (AM) is a promising technique for fabrication of complex geometries such as those expected to be utilized in the blanket, first wall, and divertor. In the case of cooling, metallic AM may be exploited to embed geometric enhancements (ribs, rifling, etc.) to improve cooling performance. However, due to the roughness of these unfinished internal AM surfaces, prediction of thermal hydraulic performance in such channels is difficult. In this work, we consider a methodology for predicting pressure drop and heat transfer in AM channels containing helical enhancements (e.g. helical ribs, twisted tapes) that allows the incorporation of roughness data through conventional pipe flow correlations. This methodology is tested using experimental friction factor and heat transfer coefficient data from high-pressure helium coolant flow measurements in AM stainless steel tubes fabricated by laser powder bed fusion. Both a featureless AM tube and one containing helical ribs were considered alongside a conventionally manufactured smooth tube. The AM surface roughness is obtained by profilometry and used to predict an equivalent sand-grain roughness, with this equivalent roughness confirmed through AM featureless tube measurements. Under the proposed methodology, this roughness information is incorporated into predictions of friction factor and Nusselt number for the rifled tube. Furthermore, these predictions agree well with experimental data across a large range of Reynolds numbers, encouraging the use of this methodology for thermal hydraulic analysis of similar systems and design of future coolant channel geometries.

Additive manufacturing↗

JHTDB-wind: a web-accessible large-eddy simulation database of a wind farm with virtual sensor querying

This paper introduces JHTDB-wind (https://turbulence.idies.jhu.edu/datasets/windfarms, last access: 11 November 2025), a publicly accessible database containing large-eddy simulation (LES) data from wind farms. Building on the framework of the Johns Hopkins Turbulence Database (JHTDB), which hosts direct numerical simulation (DNS) and some LES datasets of canonical turbulent flows, JHTDB-wind stores the 4D space–time history of the flow and provides users the ability to access and query the data via a web-based virtual sensor interface. The initial dataset comprises LES results from a large wind farm with 10×6 turbines, modeled using a filtered actuator line method, under conventionally neutral atmospheric conditions. These data comprise 1 h (hour) of flow field data (velocity, pressure, potential temperature deviation, subgrid-scale (SGS) eddy viscosity, and turbine forces, approximately 15 TB (terabytes) and wind turbine data – including both turbine-level operational quantities and blade-level aerodynamic quantities (approximately 1.3 TB) – stored in Zarr and Parquet formats, respectively. Data retrieval is facilitated by the giverny Python package, allowing remote users to query the database in Python or MATLAB (C and Fortran support are available for flow field data). This paper details the simulation setup and demonstrates data access through examples that analyze wind farm flow structures and turbine performance. The framework is extensible to future datasets, including the JHTDB-wind diurnal cycle simulation analyzed in Xiao et al. (2025).

17 WIND ENERGY↗

Charge-dependent flow induced by electromagnetic fields in heavy ion collisions

The colliding heavy ions create extremely strong magnetic and electric fields that significantly affect the evolution of the produced quark-gluon plasma (QGP). The knowledge of these fields is essential for establishing the role of topological fluctuations in the QGP through the chiral magnetic effect and related anomaly-induced phenomena. In this talk, we describe our work on the evolution of the QGP in electric and magnetic fields in the framework of hydrodynamics supplemented, in a perturbative fashion, by the dynamical electromagnetism. The evolution of the QGP fluid is described within the iEBE-VISHNU framework. We find that the electromagnetically induced currents result in a charge-odd directed flow Δv 1 and a charge-odd Δv 3 flow both of which are odd in rapidity. Furthermore, while the predicted magnitude of these charge-odd flows agrees with the data from RHIC and LHC, the sign of the predicted asymmetry between the flows of positive and negative hadrons is opposite to the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radio-frequency stabilization of a nonequilibrium plasma accelerator

Results of experimental studies of the effect of an external RF field on the excitation of oscillations in a magnetoplasmadynamic plasma accelerator are presented. It is found that applying an RF field can suppress the drift component of low-frequency oscillations in the ejected plasma flow. The experimental data agree with the concept of stabilization of the plasma accelerator by the magnetic component of the field generated by the RF current loop. The conditions under which the RF field stabilizes the generation of the plasma flow are determined, and the factors limiting the stabilization efficiency are revealed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗