Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Data-driven variational multiscale reduced order models

We propose a new data-driven reduced order model (ROM) framework that centers around the hierarchical structure of the variational multiscale (VMS) methodology and utilizes data to increase the ROM accuracy at a modest computational cost. The VMS methodology is a natural fit for the hierarchical structure of the ROM basis: In the first step, we use the ROM projection to separate the scales into three categories: (i) resolved large scales, (ii) resolved small scales, and (iii) unresolved scales. In the second step, we explicitly identify the VMS–ROM closure terms, i.e., the terms representing the interactions among the three types of scales. In the third step, we use available data to model the VMS–ROM closure terms. Thus, instead of phenomenological models used in VMS for standard numerical discretizations (e.g., eddy viscosity models), we utilize available data to construct new structural VMS–ROM closure models. Specifically, we build ROM operators (vectors, matrices, and tensors) that are closest to the true ROM closure terms evaluated with the available data. We test the new data-driven VMS–ROM in the numerical simulation of four test cases: (i) the 1D Burgers equation with viscosity coefficient v = 10 -3 ; (ii) a 2D flow past a circular cylinder at Reynolds numbers, Re = 100, Re = 500, and Re= 1000; (iii) the quasi-geostrophic equations at Reynolds number Re = 450 and Rossby number Ro = 0.0036; and (iv) a 2D flow over a backward facing step at Reynolds number Re = 1000. The numerical results show that the data-driven VMS–ROM is significantly more accurate than standard ROMs.

42 ENGINEERING↗
DOE OSTI2025

Computational materials reliability assessment of hydrogen fueled gas turbine power generation engines

The use of blended fuel sources in land based gas turbine engines drives variations in the resulting operational profile (temperatures and pressures) which can impact engine reliability. Furthermore, variability in the manufacture of components affects the resulting microstructure which directly impacts material performance and reliability. Currently, data-driven models are typically used for maintaining and inspecting fleets of engines. Without explicitly capturing material and operational sources of variability conservatism must be used in developing component-level reliability models. Therefore, there exists an opportunity to use information from materials-scale physics models to better inform reliability modeling and reduce conservatism; the impact is more cost-efficient operation and maintenance of current and future fleets. Specifically, this work establishes a computational framework for evaluating the probabilistic high temperature creep performance of hot-section Ni-based superalloys where uncertainty comes from both microstructural and operational variability. A novel high-fidelity physics model which phenomenologically captures grain-boundary sensitive phenomena has been established. A probabilistic calibration procedure was used to calibrate the model and capture uncertainty in the parameterized model coefficients. A design of experiments methodology was established for identifying informative microstructural digital representations for suitable for forward model evaluation. Results show that training a machine-learning surrogate using this design criteria outperforms random selection of microstructural representations. Finally, two surrogate models were developed: (1) a deterministic surrogate model which predicts the local field response given microstructure, constitutive model parameters, and operating conditions (stress, temperature) and (2) a probabilistic model, where uncertainty comes from constitutive law uncertainty, built using denoising diffusion probabilistic models which samples responses given (1) microstructure and (2) operating conditions. These surrogate models enable partner Siemens Energy to rapidly perform UQ analysis specific to creep deformation across a range of microstructures and operating conditions. The impact is that these ML and physics codes can be used to establish more advanced reliability models for the inspection, servicing, and maintenance of land based gas turbine engines.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quasi-Distributed Fiber Sensor-Based Approach for Pipeline Health Monitoring: Generating and Analyzing Physics-Based Simulation Datasets for Classification

This study presents a framework for detecting mechanical damage in pipelines, focusing on generating simulated data and sampling to emulate distributed acoustic sensing (DAS) system responses. The workflow transforms simulated ultrasonic guided wave (UGW) responses into DAS or quasi-DAS system responses to create a physically robust dataset for pipeline event classification, including welds, clips, and corrosion defects. This investigation examines the effects of sensing systems and noise on classification performance, emphasizing the importance of selecting the appropriate sensing system for a specific application. The framework shows the robustness of different sensor number deployments to experimentally relevant noise levels, demonstrating its applicability in real-world scenarios where noise is present. Overall, this study contributes to the development of a more reliable and effective method for detecting mechanical damage to pipelines by emphasizing the generation and utilization of simulated DAS system responses for pipeline classification efforts. The results on the effects of sensing systems and noise on classification performance further enhance the robustness and reliability of the framework.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Smoky Mountain Data Challenge 2020: An Open Call to Solve Data Problems in the Areas of Neutron Science, Material Science, Urban Modeling and Dynamics, Geophysics, and Biomedical Informatics

The 2020 Smoky Mountains Computational Sciences and Engineering Conference enlists research scientists from across Oak Ridge National Laboratory (ORNL) to be data sponsors and help create data analytics challenges for eminent data sets at the laboratory. This work describes the significance of each of the seven data sets and their as- sociated challenge questions. The challenge questions for each data set were required to cover multiple difficulty levels. An international call for participation was sent to students, and researchers asking them to form teams of up to four people to apply novel data analytics techniques to these data sets.

Parete-Koon, Suzanne↗
DOE OSTI2020

Capturing the full benefits of bifacial modules to approach an LCOE of 3c/kWh through a regional optimization of the electrical architecture (Final Technical Report)

This is the final technical report for the Cypress Creek Renewables project focused on bifacial plant performance. The project consisted of building a heavily instrumented Bifacial test sites with several cell technologies; instrumenting >1 MW scale commercial sites with both monofacial and bifacial arrays in order to understand real-world differences; and to engage with the performance modeling and financial stakeholder community to improve accuracy and increase investor confidence. The data from the test and commercial sites has been used to validate and improve the accuracy of both physics-based and reduced order modeling software. The heavily instrumented nature has been used to understand how light contributions from the sky and reflected from the ground impact different portions of the module and array while the data from the commercial sites has directly impacted how independent engineers model production from bifacial systems. The latter point has led to an increase in over 2% compared to earlier predictions. Even this modest increase has had significant downward pressure on project LCOE. As the data and results are both public, this refined modeling and empirical evidence for a higher bifacial gain than modeled, the benefits to the broader US solar community are assured.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Material transfers detection with seismic observations

We are exploring the use of data from a seismic network around a research nuclear reactor and isotope production facility at Oak Ridge National Laboratory to study activity patterns related to the transfer of nuclear material. A sensor network with eight seismometers was installed around the High Flux Isotope Reactor and the Radiochemical Engineering Development Center and started operating in October 2019. These data are used to detect and characterize operational events around facility. We are using those data to extract signals related to the movement of vehicles involved in the transport of nuclear materials (e.g., transportation of reactor fuel, targets, and product isotopes). Large vehicles produce mechanical energy that can be observed as seismic signals, either as the result of sound emanating from the vehicle engine or by the generation of surface waves as a response of the ground to the load of the vehicles. In particular, the station located near the entrance gate of the facility displays a clear seismic signature as vehicles cross a metal platform on the ground. This signal is characterized by sharp energy bursts that correspond to the number of axles on the vehicle. We developed and are testing an algorithm to identify sequences of energy bursts to count and characterize vehicles of different sizes. We are also exploring the use of seismic polarization analysis to measure the degree of polarization of the observed signals. These two techniques for detection and characterization of vehicles used for nuclear material transfers will be validated with seismic data from a targeted collection using different vehicles and routes similar to the ones used in real-life scenarios at the High Flux Isotope Reactor.

Marcillo, Omar↗
DOE OSTI2022

Machine learning-based ethylene concentration estimation, real-time optimization and feedback control of an experimental electrochemical reactor

With the increase in electricity supply from clean energy sources, electrochemical reduction of carbon dioxide (CO 2 ) has received increasing attention as an alternative source of carbon-based fuels. As CO 2 reduction is becoming a stronger alternative for the clean production of chemicals, the need to model, optimize and control the electrochemical reduction of the CO 2 process becomes inevitable. However, on one hand, a first-principles model to represent the electrochemical CO 2 reduction has not been fully developed yet because of the complexity of its reaction mechanism, which makes it challenging to define a precise state-space model for the control system. On the other hand, the unavailability of efficient concentration measurement sensors continues to challenge our ability to develop feedback control systems. Gas chromatography (GC) is the most common equipment for monitoring the gas product composition, but it requires a period of time to analyze the sample, which means that GC can provide only delayed measurements during the operation. Moreover, the electrochemical CO 2 reduction process is catalyzed by a fast-deactivating copper catalyst and undergoes a selectivity shift from the product-of-interest at the later stages of experiments, which can pose a challenge for conventional control methods. To this end, machine learning (ML) techniques provide a potential approach to overcome those difficulties due to their demonstrated ability to capture the dynamic behavior of a chemical process from data. Motivated by the above considerations, we propose a machine learning-based modeling methodology that integrates support vector regression and first-principles modeling to capture the dynamic behavior of an experimental electrochemical reactor; this model, together with limited gas chromatography measurements, is employed to predict the evolution of gas-phase ethylene concentration. The model prediction is directly used in a proportional-integral (PI) controller that manipulates the applied potential to regulate the gas-phase ethylene concentration at energy-optimal set-point values computed by a real-time process optimizer (RTO). Specifically, the RTO calculates the operation set-point by solving an optimization problem to maximize the economic benefit of the reactor. Finally, suitable compensation methods are introduced to further account for the experimental uncertainties and handle catalyst deactivation. The proposed modeling, optimization, and control approaches are the first demonstration of active control for a CO 2 electrolyzer and contribute to the automation and scale-up efforts for electrified manufacturing of fuels and chemicals starting from CO 2 .

42 ENGINEERING↗
DOE OSTI2025

RB-TnSeq elucidates dicarboxylic-acid-specific catabolism in β-proteobacteria for improved plastic monomer upcycling

Dicarboxylic acids are key components of many polymers and plastics, making them a target for both engineered microbial degradation and sustainable bioproduction. In this study, we generated a comprehensive data set of functional evidence for the genetic basis of dicarboxylic and fatty acid metabolism using randomly barcoded transposon sequencing (RB-TnSeq). We identified four β-proteobacteria that displayed robust growth with dicarboxylic acid sole carbon source and cultured their mutant libraries with dicarboxylic and fatty acids with carbon chain lengths from C3 to C12. The resulting fitness data suggested that dicarboxylic and fatty acid metabolisms are largely distinct, and different sets of β-oxidation genes are required for catabolizing dicarboxylic versus fatty acids of the same carbon chain lengths. In addition, we identified transcriptional regulators and transporters with strong fitness phenotypes related to dicarboxylic acid utilization. In Ralstonia sp. UNC404CL21Col (R. CL21), we deleted two transcriptional repressors to improve its utilization of short-chain dicarboxylic acids. We exploited the diacid-utilizing catabolism of R. CL21 to upcycle a mock mixture of the dicarboxylic acids produced when polyethylene is oxidized. After introducing a heterologous indigoidine production pathway, this engineered Ralstonia produced 0.56 ± 0.02 g/L indigoidine from a mixture of dicarboxylic acids as a carbon source, demonstrating the potential of R. CL21 to upcycle plastic wastes to products derived from tricarboxylic acid (TCA) cycle intermediates. IMPORTANCE: Upcycling the carbon in plastic wastes to value-added products is a promising approach to address the plastic waste and climate crises, and dicarboxylic acid metabolism is an important facet of several approaches. Improving our understanding of the genetic basis of this metabolism has the potential to uncover new enzymes and genetic parts for engineered pathways involving dicarboxylic acids. Our data set is the most comprehensive interrogation of dicarboxylic acid catabolism to date, and this work will be of utility to researchers interested in both plastics bioproduction and upcycling applications.

Pearson, Allison N↗
DOE OSTI2020

Big Data Analytic for Cascading Failure Analysis

With the challenges of increased grid dynamics and more variability of power generation from renewable energy sources, rapidly increasing complexity in the grid model, and abundant data from measurements and simulations, the requirements for computational analysis have also increased dramatically. Power system operators and engineers need to analyze more scenarios, extract meaningful information from a larger set of data, and respond more quickly when faced with these new challenges for large-scale applications, such as contingency analysis. This paper proposes a novel big data analysis approach for power system cascading analysis, prevention, and remediation. The developed techniques will be capable of cascading analysis, better assessment of the system’s vulnerability level, as well as proposing potential remediation. Case studies using IEEE 118-bus system and a 500-bus system, with a comparison against a commercial tool, validate the advantages of the developed big data approach: accurate prediction, and more importantly, faster and effective correction actions.The developed techniques could be further used for other power system applications.

big data, cascading analysis, corrective action, m↗
DOE OSTI2021

Comparison of temperature adaptive calibration methods for laser induced fluorescence based fuel-in-oil instrument

Fuel dilution of engine oil (or fuel-in-oil, FiO) is an important issue as multiple and late-cycle fuel injection, integral to many combustion efficiency and emissions improvements (e.g., downsized boosted gasoline engines and catalyst thermal management) increases FiO rate. In addition to causing general wear and corrosion in engine due to decreased oil viscosity and pH buffering, FiO is also believed to cause destructive low speed pre-ignition (or super knock) in boosted SI engines. To understand the effects of engine operating conditions on the FiO rate, an optical diagnostic capable of measuring transient FiO on minute timescales was recently developed and demonstrated on a modified GM Ecotech engine system (Neupane et al., Applied Spectroscopy 2021). The measurement is based on adding a dye to the fuel and monitoring for its presence in oil via laser-induced fluorescence (LIF). The measured LIF signal is related to FiO concentration via pre-determined calibration factors using a multivariate classical least square (CLS) method.Since fluorescence quantum yield is a function of temperature, measured LIF intensity not only depends on FiO concentration but also oil temperature. To expand the applicability of the FiO diagnostic to transient oil-temperature conditions (e.g., cold start in practical engines), this study develops a method to account for oil-temperature variations. The effect of oil temperature (20°C - 95°C) on the LIF spectra of eight FiO samples ranging from ~0.8-15% was investigated. LIF intensities of the FiO samples decreased linearly with increasing temperature; the reductions being more significant at dye peaks. We develop a new calibration model (T-adaptive CLS) incorporating the temperature (T) effects on LIF intensity that enables simultaneous calculation of FiO and oil temperature. The improved FiO diagnostic with T-adaptive calibration is more robust, and applicable to varying oil-temperature conditions. For example, when strategies such as multiple/late fuel injections are applied to overcome cold-start instability due to use of low vaporization bio-based fuels such as ethanol, FiO rate is expected to be very high; the improved T-adaptive FiO diagnostic is hence relevant for engine- and fuel-system calibration and optimization. The diagnostic could also provide validation data for flow-field and spray interaction CFD models, further broadening the diagnostic’s utility for advancing engine technology and efficiency.

Neupane, Sneha↗
DOE OSTI2025

Ca X ML: Chemistry‐informed machine learning explains mutual changes between protein conformations and calcium ions in calcium‐binding proteins using structural and topological features

Proteins' flexibility is a feature in communicating changes in cell signaling instigated by binding with secondary messengers, such as calcium ions, associated with the coordination of muscle contraction, neurotransmitter release, and gene expression. When binding with the disordered parts of a protein, calcium ions must balance their charge states with the shape of calcium-binding proteins and their versatile pool of partners depending on the circumstances they transmit. Accurately determining the ionic charges of those ions is essential for understanding their role in such processes. However, it is unclear whether the limited experimental data available can be effectively used to train models to accurately predict the charges of calcium-binding protein variants. Here, we developed a chemistry-informed, machine-learning algorithm that implements a game theoretic approach to explain the output of a machine-learning model without the prerequisite of an excessively large database for high-performance prediction of atomic charges. We used the ab initio electronic structure data representing calcium ions and the structures of the disordered segments of calcium-binding peptides with surrounding water molecules to train several explainable models. Network theory was used to extract the topological features of atomic interactions in the structurally complex data dictated by the coordination chemistry of a calcium ion, a potent indicator of its charge state in protein. Our design created a computational tool of Ca X ML, which provided a framework of explainable machine learning model to annotate ionic charges of calcium ions in calcium-binding proteins in response to the chemical changes in an environment. Our framework will provide new insights into protein design for engineering functionality based on the limited size of scientific data in a genome space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

OC6 Phase III: Validation of Wind Turbine Aerodynamic Loading During Surge/Pitch Motion

The objective of Phase III of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project was to validate the accuracy of aerodynamic load predictions by offshore wind modeling tools for a floating offshore wind turbine as it experiences large surge-translational and pitch-rotational motion, as would occur during normal operation. The test data considered were generated at Politecnico di Milano – a wind tunnel with a robotic excitation system to emulate wave loading on the wind turbine. Testing was performed using a scaled version of the DTU 10-MW reference model, and motion was prescribed as harmonic oscillations in the surge and pitch directions, independently. A variety of models were examined in the project, performing a three-way validation between engineering-level tools, higher-fidelity tools, and measurement data from two wind tunnel experimental campaigns. The Load Cases (LC) considered in this testing are as follows: LC 1.X - Steady Wind LC 2.X - Unsteady Wind - Surge Motion LC 3.X - Unsteady Wind - Pitch Motion Details on the results of the OC6 Phase III campaign can be found in the following reference: Bergua R., et al. OC6 project Phase III: validation of the aerodynamic loading on a wind turbine rotor undergoing large motion caused by a floating support structure, Wind Energ. Sci., 8, 465–485, https://doi.org/10.5194/wes-8-465-2023, 2023.

17 WIND ENERGY↗
DOE OSTI2020

Development of a Time-Height Profile Assimilation Technique for Large-Eddy Simulation

Mesoscale-to-microscale coupling (MMC) aims to address the limited scope of traditional large-eddy simulations by driving the microscale flow with information concerning large-scale weather patterns provided by mesoscale models. We present a new offline MMC technique for horizontally homogeneous microscale flow conditions, in which internal forcing terms are computed based on mesoscale time–height profiles of mean-flow quantities. The advantage of such an approach is that it can be used to drive a microscale simulation with either mesoscale or observational data, and that it does not rely on specific terms in the mesoscale budget equations, which are typically not part of the default output of a mesoscale solver. The performance of the proposed profile assimilation technique is assessed based on the simulation of a typical diurnal cycle over the Scaled Wind Farm Technology site in west Texas. Results indicate that simple data assimilation techniques lead to unphysically high levels of shear and turbulence caused by the algorithm’s inability to cope with inaccuracies in the mesoscale time–height profiles. Modifying the algorithm to account for vertical coherence in the mesoscale source terms gives the microscale solver a greater ability to correct the provided mesoscale time–height profiles, leading to improved predictions of shear and turbulence statistics. The resulting turbulence statistics are in good agreement with meteorological tower observations and simulation results obtained with state-of-the-art coupling techniques using mesoscale budget components.

data assimilation↗
DOE OSTI2023

Non-linear Wire Rope Isolator Model to Enhance Transportation Simulation of Fragile Equipment

Abstract Introduction Wire rope isolators are often used as means of vibration isolation for the transportation of fragile machine equipment. When deployed as suspension systems in a transportation scenario, a simple spring–damper model is often used to predict the dynamic loads that act on the structure being transported. However, this simple model has proved to be too simplistic to be used in the development of an accurate numerical model that can predict the vibration levels experienced by the inner components of fragile equipment during its transportation. This paper describes the experimental tests conducted on a wire rope isolator used for the transportation of the prototype SSR1 cryomodule. Materials and methods A hysteretic Bouc–Wen model has been used to analytically describe the force–deformation relationship of the wire rope isolators. The developed model of the isolator has been implemented in a larger model to simulate the actual transportation of the prototype SSR1 cryomodule, a section of the new PIP-II linear accelerator under construction at Fermilab. A series of multibody dynamic simulations with rigid and flexible components was used to numerically determine the acceleration of some critical components. Results and conclusions An actual experimental transportation was simulated using two numerical models: the developed Bouc–Wen model and a conventional spring–damper model. It is shown how the Bouc–Wen formulation of the isolator characteristics drastically improves the correspondence between experimental and simulated results if compared to a spring–damper model, especially in the range of 0–30 Hz which is the most critical for transportation problems.

42 ENGINEERING↗
DOE OSTI2023

Projection pursuit adaptation on polynomial chaos expansions

Here, the present work addresses the issue of accurate stochastic approximations in high-dimensional parametric space using tools from uncertainty quantification (UQ). The basis adaptation method and its accelerated algorithm in polynomial chaos expansions (PCE) were recently proposed to construct low-dimensional approximations adapted to specific quantities of interest (QoI). The present paper addresses one difficulty with these adaptations, namely their reliance on quadrature point sampling, which limits the reusability of potentially expensive samples. Projection pursuit (PP) is a statistical tool to find the “interesting” projections in high-dimensional data and thus bypass the curse-of-dimensionality. In the present work, we combine the fundamental ideas of basis adaptation and projection pursuit regression (PPR) to propose a novel method to simultaneously learn the optimal low-dimensional spaces and PCE representation from given data. While this projection pursuit adaptation (PPA) can be entirely data-driven, the constructed approximation exhibits mean-square convergence to the solution of an underlying governing equation and thus captures the supports and probability distributions associated with the physics constraints. The proposed approach is demonstrated on a borehole problem and a structural dynamics problem, demonstrating the versatility of the method and its ability to discover low-dimensional manifolds with high accuracy with limited data. In addition, the method can learn surrogate models for different quantities of interest while reusing the same data set.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Derivative-based SINDy (DSINDy): Addressing the challenge of discovering governing equations from noisy data

Recent advances in the field of data-driven dynamics allow for the discovery of ODE systems using state measurements. One approach, known as Sparse Identification of Nonlinear Dynamics (SINDy), assumes the dynamics are sparse within a predetermined basis in the states and finds the expansion coefficients through linear regression with sparsity constraints. This approach requires an accurate estimation of the state time derivatives, which is not necessarily possible in the high-noise regime without additional constraints. We present an approach called Derivative-based SINDy (DSINDy) that combines two novel methods to improve ODE recovery at high-noise levels. First, we denoise the state variables by applying a projection operator that leverages the assumed basis for the system dynamics. Second, we use a second order cone program (SOCP) to find the derivative and governing equations simultaneously. We derive theoretical results for the projection-based denoising step, which allow us to estimate the values of hyperparameters used in the SOCP formulation. This underlying theory helps limit the number of required user-specified parameters. Finally, we present results demonstrating that our approach leads to improved system recovery for the Van der Pol oscillator, the Duffing oscillator, the Rössler attractor, and the Lorenz 96 model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Piecewise linear approximation with minimum number of linear segments and minimum error: A fast approach to tighten and warm start the hierarchical mixed integer formulation

In several areas of economics and engineering, it is often necessary to fit discrete data points or approximate nonlinear functions with continuous functions. Piecewise linear (PWL) functions are a convenient way to achieve this. PWL functions can be modeled in mathematical problems using only linear and integer variables. Moreover, there is a computational benefit in using PWL functions that have the least possible number of segments. This work proposes a novel hierarchical mixed integer linear programming (MILP) formulation that identifies a continuous PWL approximation with minimum number of linear segments for a given target maximum error. The proposed MILP formulation also identifies the solution with the least maximum error among the solutions with minimum number of segments. Then, this work proposes a fast iterative algorithm that identifies non necessarily continuous PWL approximations by solving O(S log N) linear programming (LP) problems, where N is the number of data points and S is the minimum number of segments in the non necessarily continuous case. This work demonstrates that tight bounds for the MILP problem can be derived from these approximations. Next, a fast algorithm is introduced to transform a non necessarily continuous PWL approximation into a continuous one. Finally, the tight bounds and the continuous PWL approximations are used to tighten and warm start the MILP problem. The tightened formulation is shown in experimental results to be more efficient, especially for large data sets, with a solution time that is up to two orders of magnitude less than the existing literature.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A study of adhesive bonding in metal–metal, metal–CFRP, and CFRP–CFRP material combinations under shear deformation: Fracture morphologies and damage mechanisms

Safe design of adhesive joining in multi-materials in engineered structures requires the accumulation of numerous experimental data on the failure behavior of various adhesively-bonded material combinations under different loading conditions. The deep understanding of mechanical performance, fracturing morphologies, and main damage mechanisms is also quintessential for accelerating the development of proper physics-based and multi-scale models for assisting the design. Towards this goal, this work presents a comprehensive characterization of the failure behavior of adhesively-bonded metal–metal, metal–CFRP, and CFRP–CFRP material combinations under global shear deformation via single lap shear testing. Thanks to a synergistic combination of measurement methods by using Digital Imaging Correlation (DIC) and 3D optical profilometry, adhesive features on the adherend after failure were quantified and the main progressive damage mechanisms were identified. The characterization performed in this work provides quantitative data that contributes to a better understanding of shear failure in adhesive bonding across different bi-material combinations. Finally, the obtained results have practical implications, including the potential to enhance adhesive bonding design, identify failure causes in adhesive joints, and develop or validate computational models capable of capturing the observed behavior in various adhesively-bonded materials under global shear deformation.

36 MATERIALS SCIENCE↗