Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Assessing Impacts on Pressure Stabilization and Leasing Acreage for CO 2 Storage Utilizing Oil Migration Concepts

Favorable geological storage for CO 2 has long been pictured as large anticlines with thick sandstones, similar to oil reservoirs in the petroleum system. Unlike oil, however, stored CO 2 does not need to be recoverable, which raises the possibility of using dissolution and residual trapping to augment the capacity of buoyant traps and tap more of the bulk rock volume. The work presented builds on that idea, asking the following question: If we inject CO 2 down to a syncline – analogous to the carrier bed in the petroleum system – how would this injection mechanism impact storage capacity and plume shape, migration, and stabilization? To address this question, we built a reservoir model, based on seismic interpretation of Middle Miocene strata, offshore Galveston, Texas. 3-D seismic and well logs were used to characterize key intervals. Reservoirs chosen for modeling are progradational-aggradational sands with mud intercalation. They have a higher degree of heterogeneity than the more conventional reservoirs commonly targeted for CO 2 storage. Modeling investigated how far the CO 2 plume would migrate under two scenarios: (1) injecting CO 2 at the base of the salt withdrawal basin (syncline scenario) and (2) injecting CO 2 at the base of the structural closure, similar to a common injection well location for EOR purposes (base scenario). For each scenario, we separately simulated injection of 30 MT of CO 2 and 60 MT of CO 2 continuously for 30 years and observe the plume and pressure evolution for 100 years after the injection stops. The simulation shows that injecting the CO 2 into a syncline limits the vertical migration of CO 2 , thus making synclinal injection more secure. In the syncline scenario, the geological layer around the injection point is more heterogeneous than the layer in the base scenario; thus, the CO 2 tends to migrate laterally. Additionally, in the syncline scenario, the plume does not even reach the upper part of the anticline, allowing us to safely store an additional amount of CO 2 into the reservoir. Furthermore, the simulation also shows that in the syncline scenario, the times needed for the reservoir to reach its stabilized pressure after the end of injections are faster. To summarize, CO 2 injection at the base of a syncline could provide additional storage, increase the safety of the project from the limited vertical plume migration, and expedite plume stabilization, which could result in the decrease of monitoring frequency as the project runs, thus lowering the operating cost of the project in the long run.

58 GEOSCIENCES↗

Explore: An Advanced Computing Agenda for Competitiveness

Over the course of this three-year grant, the Council on Competitiveness (Council) hosted six meetings of its Advanced Computing Roundtable made up of experts from a broad cross section of advanced computing users and manufacturers, and four Advanced Computing for Competitiveness Regional Forums to explore issues related to advanced computing in regions, states and localities. More than two hundred experts, stakeholders and policymakers from the federal and state levels participated in this work and provided their time and expertise to help define the opportunity in advanced computing and the barriers to it reaching its full potential as a game-changing competitive advantage for the United States economy and national security. Building on the insights of the Council’s Advanced Computing Roundtable and findings and recommendations from the four U.S. Department of Energy-supported Forums, the Council has identified several broad policy objectives for the United States related to advanced computing leadership and implementation. The United States must: Compete at the high end of advanced computing. Continue investing to be a technology leader as the world moves toward exascale computing, including in hardware, software and applications. America also must lead in strategic areas like extending Moore’s Law and quantum computing. Improve the ability of HPC-using firms to leverage advanced computing. The Council recommends steps to improve computational skills, increase industry partnerships with laboratories and academia, and expand and strengthen software partnerships. Regulatory agencies also should accelerate efforts to use modeling and simulation within the regulatory process. Expand the number of HPC-using companies in America. Too few firms are able to leverage advanced computing to innovate and compete. Federal, state and local economic development efforts should be utilized to lower barriers and teach small and medium-sized firms, particularly manufacturers, to use advanced modeling, simulation and analytics. Coordinate federal action. Federal agencies should continue to act in a coordinated fashion on advanced computing challenges through the Joint Program Office for Strategic Computing. Leverage HPC to compete in strategic technologies and applications. Leadership in advanced computing is tightly linked to leadership in artificial intelligence, the Internet of Things, cybersecurity, additive manufacturing and other emerging technologies. Public and private sector leaders should collaborate on research and partnership efforts that ensure world-class computing environments for strategic technology leadership.

advanced computing↗

Barrierless nucleation in glassy precursors drives zeolite formation

Zeolites are crystalline, microporous silicates widely used in catalysis and separations, yet the molecular mechanisms of their formation remain unresolved. Experiments indicate that hydrothermal synthesis of silica zeolites from clear solution proceeds through amorphous nanoaggregates that gradually develop zeolite order in an apparently continuous amorphous to crystal transformation. Here, we combine molecular simulations with advanced algorithms that identify zeolite order and computer vision to elucidate the pathway from clear solution to zeolite nanocrystal. We show that at conditions of hydrothermal synthesis of silica zeolites, the transformation of precursor aggregate into zeolite is not limited by nucleation barriers but by the slow dynamics of reorganization in the glassy precursor matrix. The negligible nucleation barriers result in spinodal-like crystallization that leads to a gradual formation of a mosaic of small crystallites that explain the seemingly continuous character of zeolite crystallization and the catalytic activity of X-ray amorphous, protozeolites and embryonic zeolites. We find that zeolite-like porosity and short-range order emerge early within glassy precursors, well before crystallinity is detected in transmission electron microscopy (TEM) images or X-ray diffraction. The nanoaggregate’s temperature-size phase diagram reveals a convergence of the zeolite–amorphous equilibrium and maximum crystallization rate at ~3 nm diameter nanoparticle diameters and ~200 °C. This convergence signals the termination of the first-order amorphous-to-zeolite transition. Our results provide a unifying framework for understanding nucleation of silica zeolites from solution and suggest that barrierless nucleation may govern the formation of other nanoparticle systems, including minerals and oxides synthesized far below their bulk melting points.

36 MATERIALS SCIENCE↗

Diffusion model approach to simulating electron-proton scattering events

Generative artificial intelligence is a fast-growing area of research offering various avenues for exploration in high-energy nuclear physics. In this work, we explore the use of generative models for simulating electron-proton collisions relevant to experiments like the Continuous Electron Beam Accelerator Facility and the future Electron-Ion Collider (EIC). These experiments play a critical role in advancing our understanding of nucleons and nuclei in terms of quark and gluon degrees of freedom. The use of generative models for simulating collider events faces several challenges such as the sparsity of the data, the presence of global or eventwide constraints, and steeply falling particle distributions. In this work, we focus on the implementation of diffusion models for the simulation of electron-proton scattering events at EIC energies. Our results demonstrate that diffusion models can reproduce relevant observables such as momentum distributions and correlations of particles, momentum sum rules, and the leading electron kinematics, all of which are of particular interest in electron-proton collisions. Although the sampling process is relatively slow compared to other machine-learning architectures, we find diffusion models can generate high-quality samples. We foresee various applications of our work including inference for nuclear structure, interpretable generative machine learning, and searches of physics beyond the Standard Model. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of a performance appraisal framework for radiation therapists in planning and simulation

Constantly evolving technology and techniques within radiation therapy require practitioners to maintain a continuous approach to professional development and training. Systems of performance appraisal and adoption of regular feedback mechanisms are vital to support this development yet frequently lack structure and rely on informal peer support. A Radiation Therapy Performance Appraisal Framework (RT-PAF) for radiation therapists in planning and simulation was developed to define expectations of practice and promote a supportive and objective culture of performance and skills appraisal. Evaluation of the framework was conducted via an anonymous online survey tool. Nine peer reviewers and fourteen recipients provided feedback on its effectiveness and the challenges and limitations of the approach. Findings from the evaluation were positive and suggested that both groups gained benefit from and expressed a strong interest in embedding the approach more routinely. Respondents identified common challenges related to the limited ability to implement suggested development strategies; this was strongly associated with time and rostering issues. This framework successfully defined expectations for practice and provided a fair and objective feedback process that focussed on skills development. It empowered staff to maintain their skills and reach their professional potential. Management support, particularly in regard to provision of protected time was highlighted as critical to the framework's ongoing success. The demonstrated benefits arising in terms of staff satisfaction and development highlight the importance of this commitment to the modern radiation therapy workforce.

07 ISOTOPE AND RADIATION SOURCES↗

Increased laser-accelerated proton energies via direct laser-light-pressure acceleration of electrons in microcone targets

We present experimental results showing a laser-accelerated proton beam maximum energy cutoff of 67.5 MeV, with more than 5 x 10{sup 6} protons per MeV at that energy, using flat-top hollow microcone targets. This result was obtained with a modest laser energy of {approx}80 J, on the high-contrast Trident laser at Los Alamos National Laboratory. From 2D particle-in-cell simulations, we attribute the source of these enhanced proton energies to direct laser-light-pressure acceleration of electrons along the inner cone wall surface, where the laser light wave accelerates electrons just outside the surface critical density, in a potential well created by a shift of the electrostatic field maximum with respect to that of the magnetic field maximum. Simulations show that for an increasing acceleration length, the continuous loading of electrons into the accelerating phase of the laser field yields an increase in high-energy electrons.

43 PARTICLE ACCELERATORS↗

Quantum Simulation of the Klein Paradox with Trapped Ions

We report on quantum simulations of relativistic scattering dynamics using trapped ions. The simulated state of a scattering particle is encoded in both the electronic and vibrational state of an ion, representing the discrete and continuous components of relativistic wave functions. Multiple laser fields and an auxiliary ion simulate the dynamics generated by the Dirac equation in the presence of a scattering potential. Measurement and reconstruction of the particle wave packet enables a frame-by-frame visualization of the scattering processes. By precisely engineering a range of external potentials we are able to simulate text book relativistic scattering experiments and study Klein tunneling in an analogue quantum simulator. We describe extensions to solve problems that are beyond current classical computing capabilities.

74 ATOMIC AND MOLECULAR PHYSICS↗

SIMULATIONS OF THE BOUNDARY LAYER BETWEEN A WHITE DWARF AND ITS ACCRETION DISK

Using a 2.5D time-dependent numerical code we recently developed, we solve the full compressible Navier-Stokes equations to determine the structure of the boundary layer (BL) between the white dwarf (WD) and the accretion disk in nonmagnetic cataclysmic variable systems. In this preliminary work, our numerical approach does not include radiation. In the energy equation, we either take the dissipation function ({phi}) into account or we assume that the energy dissipated by viscous processes is instantly radiated away ({phi} = 0). For a slowly rotating nonmagnetized accreting WD, the accretion disk extends all the way to the stellar surface. There, the matter impacts and spreads toward the poles as new matter continuously piles up behind it. We carry out numerical simulations for different values of the alpha-viscosity parameter ({alpha}), corresponding to different mass accretion rates. In the high viscosity cases ({alpha} = 0.1), the spreading BL sets off a gravity wave in the surface matter. The accretion flow moves supersonically over the cusp making it susceptible to the rapid development of gravity wave and/or Kelvin-Helmholtz shearing instabilities. This BL is optically thick and extends more than 30 deg. to either side of the disk plane after only 3/4 of a Keplerian rotation period (t{sub K} = 19 s). In the low viscosity cases ({alpha} = 0.001), the spreading BL does not set off gravity waves and it is optically thin.

79 ASTRONOMY AND ASTROPHYSICS↗

Will Advanced Public Charging Infrastructure Speed Up Electrification of Future Transportation?

This study focuses on evaluating impacts of advanced, urban public charging infrastructure on the battery electric vehicle (BEV) adoption in the U.S market. Under various infrastructure scenarios (e.g., current and developed conditions), we investigate the infrastructure impacts on the near-term BEV adoption using a consumer-choice based market simulation approach. Our results suggest that current public charging infrastructure has continuous and significant impacts on the near-term BEV adoption. Additional infrastructure investment could further stimulate the public acceptance of BEVs. We also find that the actual infrastructure impact may vary depending on the assumption of how charging deployment could affect consumers' access of chargers and consumers' daily available charging time. However, this impact variability could be reduced when infrastructure is getting mature.

33 ADVANCED PROPULSION SYSTEMS↗

Spacially-Resolved Diagnostics and Modeling of Micro-Discharges (Final Report)

Optical emission spectroscopy measurements were performed with added trace probe gases in an an atmospheric pressure direct current (DC) helium microplasma. Spatially resolved measurements (resolution ≈ 6 µm) were taken across a 200 µm slot-type discharge. Stark splitting of the hydrogen Balmer-line was used to investigate the electric field distribution in the cathode sheath region. Electron densities were evaluated from the analysis of the spectral line broadenings of H-β emission. The electron density in the bulk plasma was in the range 3-8 x 10 13 cm -3 . The electric field peaked at the cathode (≈60 kV/cm) and decayed to small values over a distance of ≈ 50 µm (sheath edge) from the cathode. These experimental data were in good agreement with a self-consistent one-dimensional model of the discharge. The dependence of gas temperature on gas flow through the slot-type, atmospheric pressure microplasma in helium or argon was investigated by a combination of experiments and modeling. Spatially-resolved gas temperature profiles across the gap between the two electrodes were obtained from rotational analysis of N 2 (C 3 Π u → B 3 Π g ) emission spectra, with small amounts of N 2 added as actinometer gas. Under the same input power of 20 kW/cm 3 , the peak gas temperature in helium (≈650 K) was significantly lower than that in argon (over 1200 K). This reflects the much higher thermal conductivity of helium gas. The gas temperature decreased with increasing gas flow rate, more so in argon compared to helium. This was consistent with the fact that conductive heat losses dominate in helium microplasmas, while convective heat losses play a major role in argon microplasmas. A plasma-gas flow simulation of the microdischarge, including a chemistry set, a compressible Navier-Stokes (and mass continuity) equation, and a convective heat transport equation, was also performed. Experimental measurements were in good agreement with simulation predictions. Finally, laser scattering experiments were performed at pressures of 100s of Torr in argon or nitrogen. Laser Thomson Scattering (LTS) and Rotational Raman Scattering were employed in a novel, backscattering, confocal configuration. LTS allows direct and simultaneous measurement of both electron density (n e ) and electron temperature (T e ). For 50 mA current and over the pressure range of 300-700 Torr, LTS yielded T e = 0.9 ± 0.3 eV and n e = (6 ± 3) 10 13 cm -3 , in reasonable agreement with the predictions of a mathematical model. Rotational Raman spectroscopy (RRS) was employed for absolute calibration of the LTS signal. RRS was also applied to measure the 3D gas temperature (T g ) in nitrogen DC microdischarges. In addition, diode laser absorption spectroscopy was employed to measure the density of argon metastables (1s 5 in Paschen notations) in argon microdischarges. The gas temperature, extracted from the width of the absorption profile, was compared with T g values obtained by optical emission spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comprehensive comparisons of geodesic acoustic mode characteristics and dynamics between Tore Supra experiments and gyrokinetic simulations

In a dedicated collisionality scan in Tore Supra, the geodesic acoustic mode (GAM) is detected and identified with the Doppler backscattering technique. Observations are compared to the results of a simulation with the gyrokinetic code GYSELA. We found that the GAM frequency in experiments is lower than predicted by simulation and theory. Moreover, the disagreement is higher in the low collisionality scenario. Bursts of non harmonic GAM oscillations have been characterized with filtering techniques, such as the Hilbert-Huang transform. When comparing this dynamical behaviour between experiments and simulation, the probability density function of GAM amplitude and the burst autocorrelation time are found to be remarkably similar. In the simulation, where the radial profile of GAM frequency is continuous, we observed a phenomenon of radial phase mixing of the GAM oscillations, which could influence the burst autocorrelation time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Annual Scientific Focus Area Report for the Energy Exascale Earth System Model Project: Phase II

The project's long-term goal is to assert and maintain an international scientific leadership position in the development of Earth system models that address the grand challenge of actionable predictions of Earth system variability and change, with an emphasis on the most critical scientific questions facing the nation and DOE. The grand challenge will be addressed by overcoming three major limitations: Pushing the high-resolution frontier of Earth system modeling through a combination of strategic model development and computational advances targeting exascale computers and beyond. Bridging the gap in scales and processes by developing a new class of models that couple the natural, managed, and man-made systems across scales to address energy sector vulnerability to variability and change. The project will achieve its goal through four intersecting project elements: A series of prediction and simulation experiments addressing scientific questions and mission needs; A well-documented and tested, continuously advancing, evolving, and improving system of model codes that comprise the E3SM Earth system model; The ability to use effectively leading (and “bleeding”) edge computational facilities soon after their deployment at DOE national laboratories; and An infrastructure to support code development, hypothesis testing, simulation execution, and analysis of results. To achieve the Grand Challenge of actionable Earth system predictions to address the most critical scientific questions facing our nation and DOE, the E3SM project defined its strategy in a fifteen-year roadmap with four intersecting project elements: A series of prediction and simulation experiments addressing scientific questions and mission needs; A well-documented and tested, continuously advancing, evolving, and improving system of model codes that comprise the E3SM Earth system model ; The ability to use effectively leading (and “bleeding”) edge computational facilities soon after their deployment at DOE national laboratories; and An infrastructure to support code development, hypothesis testing, simulation execution, and analysis of results. Figure 1 depicts the E3SM Project Roadmap, showing the relationships among the first three major project elements: the simulations, the modeling system to perform those simulations, and the machines on which they will be executed. Unlike the other three elements that have distinct but overlapping phases, the fourth element, the infrastructure, will evolve continuously based on the requirements imposed by project needs.

54 ENVIRONMENTAL SCIENCES↗

Simulating Magnetized Laboratory Plasmas with Smoothed Particle Hydrodynamics

The creation of plasmas in the laboratory continues to generate excitement in the physics community. Despite the best efforts of the intrepid plasma diagnostics community, the dynamics of these plasmas remains a difficult challenge to both the theorist and the experimentalist. This dissertation describes the simulation of strongly magnetized laboratory plasmas with Smoothed Particle Hydrodynamics (SPH), a method born of astrophysics but gaining broad support in the engineering community. We describe the mathematical formulation that best characterizes a strongly magnetized plasma under our circumstances of interest, and we review the SPH method and its application to astrophysical plasmas based on research by Phillips [1], Buerve [2], and Price and Monaghan [3]. Some modifications and extensions to this method are necessary to simulate terrestrial plasmas, such as a treatment of magnetic diffusion based on work by Brookshaw [4] and by Atluri [5]; we describe these changes as we turn our attention toward laboratory experiments. Test problems that verify the method are provided throughout the discussion. Finally, we apply our method to the compression of a magnetized plasma performed by the Compact Toroid Injection eXperiment (CTIX) [6] and show that the experimental results support our computed predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chapter 7 - Simulations of Arctic Mixed-Phase Boundary Layer Clouds: Advances in Understanding and Outstanding Questions. In: Mixed-Phase Clouds, Observations and Modeling

An overview of mixed-phase boundary layer cloud simulations emphasizes what detailed studies reveal about the level of understanding of microphysical processes, using analogous liquid-phase boundary layer clouds as a reference for the dynamical conditions. We focus primarily on modeling results from three major field campaign case studies, spanning a range of liquid water path, aerosol loading, cloud temperatures, and active processes (including drizzle, aggregation, and riming). Simulations with detailed microphysics are able to reproduce basic aspects of all three case studies, including continuous ice formation within the context of a well-mixed liquid-cloud-topped layer. However, simulations constrained with measurements of ice nuclei generally underpredict the observed amount of ice present, indicating a possible role for ice multiplication that is poorly established. Assumed ice properties may also bear a significant influence on the water vapor budget and reflectivity properties, but remain imprecisely quantified on a case study basis.

Arctic clouds↗

Extending the Concept of Component Interfaces: Experience with the Integrated Plasma Simulator

In the component approach, components are said to interact through well-defined interfaces. Conventionally, these interfaces are based on method signatures which define the syntax, if not the semantics of the interface. However in many cases, this does not encompass all of the interactions a component has with its peers. In the Integrated Plasma Simulator (IPS), a framework for coupled simulation of fusion plasmas developed by the Center for Simulation of RF Wave Interactions with Magnetohydrodynamics (SWIM), we find that components interact through files and through an event service in addition to the usual method calls. In this report, we discuss the motivations for the design of the IPS and our experience with it. We further consider whether the concept of a component interface needs to be extended, and how it might be done. Component-based software engineering (CBSE) has allowed applications to grow in size, scale and power, by coupling components along well-defined interfaces. Many groups have come together to provide rules and standards for component and interface definitions. General purpose component architectures have been designed for business, and scientific computing, while domain specific component frameworks have been created in many domains, including climate modeling, rocket simulation, and engineering. In each architecture, component interfaces, typically implemented as method invocations, are the only ways that are mentioned for components to interact with each other and the outside world. However, components may not always communicate over their interfaces. They can interact with software entities in many other ways including sharing files and publish/subscribe systems. In this paper we consider two ways in which components interact without method invocation in a component framework, how the component interface can be extended to describe these interactions, and the implications on the greater component community. The rest of the paper continues as follows: first we briefly describe the fusion simulation framework that serves as the basis for the discussion (Sec. 2), followed by a description of non-interface interactions (Sec. 3), a discussion of how to extend to the component interface (Sec. 4) and finally some conclusions (Sec. 5).

33 ADVANCED PROPULSION SYSTEMS↗

THE ROLE OF TURBULENCE AND MAGNETIC FIELDS IN SIMULATED FILAMENTARY STRUCTURE

We use numerical simulations of turbulent cluster-forming regions to study the nature of dense filamentary structures in star formation. Using four hydrodynamic and magnetohydrodynamic simulations chosen to match observations, we identify filaments in the resulting column density maps and analyze their properties. We calculate the radial column density profiles of the filaments every 0.05 Myr and fit the profiles with the modified isothermal and pressure-confined isothermal cylinder models, finding reasonable fits for either model. The filaments formed in the simulations have similar radial column density profiles to those observed. Magnetic fields provide additional pressure support to the filaments, making “puffier” filaments less prone to fragmentation than in the pure hydrodynamic case, which continue to condense at a slower rate. In the higher density simulations, the filaments grow faster through the increased importance of gravity. Not all of the filaments identified in the simulations will evolve to form stars: some expand and disperse. Given these different filament evolutionary paths, the trends in bulk filament width as a function of time, magnetic field strength, or density are weak, and all cases are reasonably consistent with the finding of a constant filament width in different star-forming regions. In the simulations, the mean FWHM lies between 0.06 and 0.26 pc for all times and initial conditions, with most lying between 0.1 to 0.15 pc; the range in FWHMs is however, larger than seen in typical Herschel analyses. Finally, the filaments display a wealth of substructure similar to the recent discovery of filament bundles in Taurus.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal performance of phase change materials with anisotropic carbon fiber inserts

In thermal energy storage systems, phase change materials (PCMs) are widely used for thermal energy management. Most PCMs have low thermal conductivities, which limits the heat transfer rate within PCM and thus makes the phase-changing process very slow. However, thermal conductivities of PCMs can be altered by inserting targeted additives. We hypothesize that the size and shape of these additive inserts play a key role in thermal management efficiency. To this end, the impacts of carbon fiber (CF) inserts on the phase change behavior and consequent heat transfer efficiencies of inorganic and organic PCMs were investigated using experiments and simulations. Long, anisotropic CFs with high thermal conductivities formed continuous fast heat flux tunnels inside PCMs to enhance the heat transfer. Such CFs could extend the phase change fronts from the limited container-shaped interface to the larger surface of numerous CF inserts inside the PCM. These special CF inserts work with a new heat transfer mechanism, different from conventional small additives or long isotropic CF inserts. The thermal energy release rate increased by 2.5 times with 1 wt.% anisotropic CF inserts in inorganic PCM. However, CF inserts in liquid organic PCM hindered the natural convection and compromised the improved heat conduction. In conclusion, the lab-scale multiphysics simulations support these experimental observations and indicate that CF inserts have potential to enhance heat transfer in inorganic PCMs, but they are less effective in organic PCMs.

25 ENERGY STORAGE↗

Understanding and predicting geometrical constraint ferroelectric charged domain walls in a BiFeO 3 island via phase-field simulations

It has been known that ferroelectric charged domain walls (CDWs), which break the polarization continuity, may be electrically active with an elevated conductivity. However, the bound charge at CDWs may render them energetically unstable, and thus, forming CDWs naturally and manipulating them electrically is still challenging. Here, we theoretically utilize phase-field simulations to design spontaneously generated CDWs with center-type quad-domains in a single square-shaped BiFeO 3 nanoisland. It is shown that the stability of the spontaneously emerging head-to-head domain walls with center-convergent quad-domains is mainly determined by three contributions, namely, the geometrical constraint from approximately 45°-tilted bottom edges, the electric boundary condition, and the necessary screening free charges to compensate head-to-head domain walls. It is demonstrated that the center-convergent quad-domains with head-to-head CDWs can be electrically switched to the center-divergent one with tail-to-tail CDWs, providing guidance for achieving ferroelectric domain-wall-based nanodevices with low-power dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗