Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Getters for improved technetium containment in cementitious waste forms

A cementitious waste form, Cast Stone, is a possible candidate technology for the immobilization of low activity nuclear waste (LAW) at the Hanford site. This paper focuses on the addition of getter materials to Cast Stone that can sequester Tc from the LAW, and in turn, lower Tc release from the Cast Stone. Two getters which produce different products upon sequestering Tc from LAW were tested: Sn(II) apatite (Sn-A) that removes Tc as a Tc(IV)-oxide and potassium metal sulfide (KMS-2) that removes Tc as a Tc(IV)-sulfide species, allowing for a comparison of stability of the form of Tc upon entering the waste form. The Cast Stone with KMS-2 getter had the best performance with addition equivalent to ~0.08 wt% of the total waste form mass. The observed diffusion (D obs ) of Tc decreased from 4.6 ± 0.2 × 10 -12 cm 2 /s for Cast Stone that did not contain a getter to 5.4 ± 0.4 × 10 -13 cm 2 /s for KMS-2 containing Cast Stone. Finally, it was found that Tc-sulfide species are more stable against re-oxidation within getter containing Cast Stone compared with Tc-oxide and is the origin of the decrease in Tc D obs when using the KMS-2.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microbial interactions with phosphorus containing glasses representative of vitrified radioactive waste

The presence of phosphorous in borosilicate glass (at 0.1 – 1.3 mol % P 2 O 5 ) and in iron-phosphate glass (at 53 mol % P 2 O 5 ) stimulated the growth and metabolic activity of anaerobic bacteria in model systems. Dissolution of these phosphorous containing glasses was either inhibited or accelerated by microbial metabolic activity, depending on the solution chemistry and the glass composition. The breakdown of organic carbon to volatile fatty acids increased glass dissolution. The interaction of microbially reduced Fe(II) with phosphorus-containing glass under anoxic conditions decreased dissolution rates, whereas the interaction of Fe(III) with phosphorous-containing glass under oxic conditions increased glass dissolution. Phosphorous addition to borosilicate glasses did not significantly affect the microbial species present, however, the diversity of the microbial community was enhanced on the surface of the iron phosphate glass. Results demonstrate the potential for microbes to influence the geochemistry of radioactive waste disposal environments with implication for wasteform durability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical simulations of mounding and submerging flows of shear-thinning jets impinging in a container

Continuous jets of non-Newtonian fluids impinging on a fluid surface exhibit instabilities from jet buckling and coiling at low Reynolds numbers to delayed die swell, mounding, and air entrainment at higher Reynolds numbers. Filling containers with complex fluids is an important process for many industries, where the need for high throughput requires operating at high Reynolds numbers. In this regime, air entrainment can produce a visually unappealing product, causing a major quality control issue. Just prior to the onset of air entrainment, however, there exists an ideal filling regime which we term “planar filling,” as it is characterized by a relatively flat free surface that maintains its shape over time. In this paper, we create a steady-state, 2-D axisymmetric finite element model to study the transition from planar filling to the onset of air entrainment in a container filling process with generalized-Newtonian fluids. We use this model to explore the operating window for Newtonian and shear-thinning (or, more generally, deformation-rate-thinning) fluids, demonstrating that the flow behavior is characterized by a balance between inertial, viscous, and gravitational forces, as characterized by the Reynolds and Froude numbers. A scaling analysis suggests that the relevant parameters for calculating these dimensionless numbers are located where the jet impacts the liquid surface, and simulations show that the transition from planar filling to air entrainment often occurs when Re ~ O(10). Our study found that the bottom and side surfaces of the container drastically influence this transition to entrainment, stabilizing the flow.

42 ENGINEERING↗

Effects of Composition and Oxidation States on the Structures of Chromium-Containing Sodium Silicate Glasses: Molecular Dynamics Simulations using Machine Learning Interatomic Potentials

Chromium represents a significant challenge for the vitrification of high-level nuclear waste into silicate and borosilicate glasses due to its low solubility and variable oxidation states, which can limit the waste loading due to promotion of crystallization or phase separation during processing. In this study, we modeled chromium containing silicate glasses using molecular dynamics simulations with three machine learning interatomic potentials (MLIPs), MACE, CHGNet, and PFP were employed, to gain insights on glass composition and oxidation states on the structures of these glasses. One of the goals is to evaluate their ability of these MLIPs to accurately represent the general structure of silicate glasses and chromium local environments as a function of chromium oxidation states. Density Functional Theory (DFT) based calculations and experimental data such as neutron structure factors were used to validate the structural models. It was found that the foundation models of all three MLIPs are able to reproduce general structural features of the sodium silicate glass structure consistent with experimental and DFT data, but only CHGNet and PFP can accurately capture the oxidation states and local environment of chromium: tetrahedral for Cr6+ and octahedral for Cr3+. Furthermore, we studied the effect of varying Cr3+/ Cr6+ (Cr3+/Crtotal) ratio and total chromium content using PFP. Our results show that Cr6+ enhances network polymerization by reducing non-bridging oxygens through Na? charge compensation required due to the formation of chromate (CrO42-) species, while Cr³? acts as a network modifier that disrupts connectivity. System size effects on the structural characteristics and chromium environments were also tested using the PFP potential. This work highlights the importance of careful validation on the precision, transferability, and potential of MLIPs for modeling glasses containing transition metal elements that can exist in multiple oxidation states. It is also encouraging to see the foundational models are all three MLFFs are able to reproduce the basic sodium silicate glass structures, while suggesting additional training or refining is needed to improve the description of more complex systems containing transition metals.

Puga, Christina L.↗

Structural and spectroscopic characterization of photoactive yellow protein and photoswitchable fluorescent protein constructs containing heavy atoms

Photo-induced structural rearrangements of chromophore-containing proteins are essential for various light-dependent signaling pathways and optogenetic applications. Ultrafast structural and spectroscopic methods have offered insights into these structural rearrangements across many timescales. However, questions still remain about exact mechanistic details, especially regarding photoisomerization of the chromophore within these proteins femtoseconds to picoseconds after photoexcitation. Instrumentation advancements for time-resolved crystallography and ultrafast electron diffraction provide a promising opportunity to study these reactions, but achieving enough signal-to-noise is a constant challenge. In this work, we present four new photoactive yellow protein constructs and one new fluorescent protein construct that contain heavy atoms either within or around the chromophore and can be expressed with high yields. Structural characterization of these constructs, most at atomic resolution, show minimal perturbation caused by the heavy atoms compared to wild-type structures. Spectroscopic studies report the effects of the heavy atom identity and location on the chromophore’s photophysical properties. None of the substitutions prevent photoisomerization, although certain rates within the photocycle may be affected. Overall, these new proteins containing heavy atoms are ideal samples for state-of-the-art time-resolved crystallography and electron diffraction experiments to elucidate crucial mechanistic information of photoisomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of aluminizing of Cr-containing ferritic alloys on the seal strength of a novel high-temperature solid oxide fuel cell sealing glass

A novel high-temperature alkaline-earth silicate sealing glass was developed for solid oxide fuel cell (SOFC) applications. The glass was used to join two metallic coupons of Cr-containing ferritic stainless steel for seal strength evaluation. In previous work, SrCrO4 was found to form along the glass/steel interface, which led to severe strength degradation. In the present study, aluminization of the steel surface was investigated as a remedy to minimize or prevent the strontium chromate formation. Three different processes for aluminization were evaluated with Crofer22APU stainless steel: pack cementation, vapor phase deposition, and aerosol spraying. It was found that pack cementation resulted in a rough surface with occasional cracks in the Al-diffused region. Vapor phase deposition yielded a smoother surface, but the resulting high Al content increased the coefficient of thermal expansion (CTE), resulting in failure of joined coupons. Aerosol spraying of an Al-containing salt resulted in formation of a thin aluminum oxide layer without any surface damage. The room temperature seal strength was evaluated in the as-fired state and in environmentally aged conditions. In contrast to earlier results with uncoated Crofer22APU, the aluminized samples showed no strength degradation even for samples aged in air. Interfacial and chemical compatibility was also investigated. The results showed aluminization to be a viable candidate approach to minimize undesirable chromate formation between alkaline earth silicate sealing glass and Cr-containing interconnect alloys for SOFC applications.

Seal strength, sealing glass, interface, aluminiza↗

Ionothermal syntheses of three transition-metal-containing polyoxotungstate hybrids exhibiting the photocatalytic and electrocatalytic properties

Employing the ionothermal synthesis approach, three new transition-metal-containing polyoxotungstate hybrids: [Dmim]{sub 2}Na{sub 3}[SiW{sub 11}O{sub 39}Fe(H{sub 2}O)].H{sub 2}O (Dmim=1,3-Dimethylimidazole) (1), [Emim]{sub 9}Na{sub 8}[(SiW{sub 9}O{sub 34}){sub 3}{l_brace}Fe{sub 3}(mu{sub 2}-OH){sub 2}(mu{sub 3}-O){r_brace}{sub 3}(WO{sub 4})].0.5H{sub 2}O (Emim=1-Ethyl-3-meth-ylimidazole) (2) and [Dmim]2[HMim]Na{sub 6}[(AsW{sub 9}O{sub 33}){sub 2}{l_brace}Mn{sup III}(H{sub 2}O){r_brace}{sub 3}].3H{sub 2}O (Dmim=1,3-Dimethylimidazole; Mim=1-Methylimidazole) (3) have been synthesized in 1-ethyl-3-methyl imidazolium bromide ([Emim]Br) ionic liquids (ILs). Compound 1 possesses a 3-D open framework constructed from the mono-iron{sup III}-substituted alpha-Keggin-type anion and the organic cations [Dmim]+ through the hydrogen bond interactions. Compound 2 contains a [{l_brace}Fe{sup III}{sub 3}(mu{sub 2}-OH){sub 2}(mu{sub 3}-O){r_brace}{sub 3}(mu{sub 4}-WO{sub 4})] cluster surrounded by three [SiW{sub 9}O{sub 34}]{sup 10-} ligands, eight sodium cations and nine dissociative [Emim]{sup +} cations around the polyoxoanion. The polyoxoanion of 3 consists of a high-valent trinuclear-manganese (III)-substituted sandwiching polyoxoanion based on the [alpha-AsW{sub 9}O{sub 33}]{sup 9-} units. All the compounds are characterized by elemental analyses, IR, UV-vis spectra, TG-DTA and XRD analyses. The XPS and EPR spectra of Mn{sup III} in 3 were studied. The photocatalytic and electrocatalytic properties, as well as the stabilities of 1-3 were also investigated. - Graphical abstract: Three new transition-metal-containing polyoxotungstate hybrids were synthesized successfully under the ionothermal condition, which proves that the ionothermal synthesis is a suitable synthetic method for different kinds of polyoxometalates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New ternary rare-earth metal boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) containing BC{sub 2} units: Crystal and electronic structures, magnetic properties

The ternary rare-earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) were prepared from the elements by arc-melting followed by annealing in silica tubes at 1270 K for 1 month. The crystal structures of Tb{sub 15}B{sub 4}C{sub 14} and Er{sub 15}B{sub 4}C{sub 14} were determined from single crystal X-ray diffraction data. They crystallize in a new structure type in space group P4/mnc (Tb{sub 15}B{sub 4}C{sub 14}: a=8.1251(5) A, c=15.861(1) A, Z=2, R{sub 1}=0.041 (wR{sub 2}=0.088) for 1023 reflections with I{sub o}>2{sigma}(I{sub o}); Er{sub 15}B{sub 4}C{sub 14}: a=7.932(1) A, c=15.685(2) A, Z=2, R{sub 1}=0.037 (wR{sub 2}=0.094) for 1022 reflections with I{sub o}>2{sigma}(I{sub o})). The crystal structure contains discrete carbon atoms and bent CBC units in octahedra and distorted bicapped square antiprisms, respectively. In both structures the same type of disorder exists. One R atom position needs to be refined as split atom position with a ratio 9:1 indicative of a 10% substitution of the neighboring C{sup 4-} by C{sub 2}{sup 4-}. The actual composition has then to be described as R{sub 15}B{sub 4}C{sub 14.2}. The isoelectronic substitution does not change the electron partition of R{sub 15}B{sub 4}C{sub 14} which can be written as (R{sup 3+}){sub 15}(C{sup 4-}){sub 6}(CBC{sup 5-}){sub 4{center_dot}}e{sup -}. The electronic structure was studied with the extended Hueckel method. The investigated compounds Tb{sub 15}B{sub 4}C{sub 14}, Dy{sub 15}B{sub 4}C{sub 14} and Er{sub 15}B{sub 4}C{sub 14} are hard ferromagnets with Curie temperatures T{sub C}=145, 120 and 50 K, respectively. The coercive field B{sub C}=3.15 T for Dy{sub 15}B{sub 4}C{sub 14} is quite remarkable. - Graphical abstract: The ternary rare earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) were prepared from the elements by arc-melting followed by annealing in silica tubes at 1270 K for 1 month. Tb{sub 15}B{sub 4}C{sub 14} is a new member of the rare-earth metal boride carbide series in which the finite quasi-molecular CBC entities as well as isolated C atoms are embedded in the voids of the metal atom matrix. The structure of Tb{sub 15}B{sub 4}C{sub 14} contains two types of slabs: one slab contains finite bent CBC units and isolated carbon atoms whereas another is formed only from octahedral coordinated single carbon atoms. The electronic structure for the idealized composition corresponds to an electron partitioning according to (Tb{sup 3+}){sub 15}(C{sup 4-}){sub 6}(CBC{sup 5-}){sub 4{center_dot}}e{sup -} giving rise to a single electron per formula for Tb-Tb framework bonding. The magnetism of the ternary rare earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Tb, Dy, Er) is characterized by the onset of ferromagnetic order below T<150 K.

36 MATERIALS SCIENCE↗

Cu-Ce-O mixed oxides from Ce-containing layered double hydroxide precursors: Controllable preparation and catalytic performance

Cu/Zn/Al layered double hydroxide (LDH) precursors have been synthesized using an anion exchange method with anionic Ce complexes containing the dipicolinate (pyridine-2,6-dicarboxylate) ligand. Cu-Ce-O mixed oxides were obtained by calcination of the Ce-containing LDHs. The materials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetry-differential thermal analysis, elemental analysis, and low temperature N{sub 2} adsorption/desorption measurements. The results reveal that the inclusion of Ce has a significant effect on the specific surface area, pore structure, and chemical state of Cu in the resulting Cu-Ce-O mixed metal oxides. The resulting changes in composition and structure, particularly the interactions between Cu and Ce centers, significantly enhance the activity of the Ce-containing materials as catalysts for the oxidation of phenol by hydrogen peroxide. - Graphical Abstract: Cu-Ce-O mixed oxides calcined from [Ce(dipic){sub 3}]{sup 3-}- intercalated Cu/Zn/Al layered double hydroxides were synthesized and displayed good catalytic performances in phenol oxidation due to the Cu-Ce interactions. Highlights: Black-Right-Pointing-Pointer [Ce(dipic){sub 3}]{sup 3-}-intercalated Cu/Zn/Al layered double hydroxides were synthesized. Black-Right-Pointing-Pointer Cu-Ce-O mixed oxides derivated from the LDHs were characterized as catalysts. Black-Right-Pointing-Pointer Presence of Ce influenced physicochemical property and catalytic performance. Black-Right-Pointing-Pointer Cu-Ce interaction was largely responsible for enhanced catalytic ability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization, and crystal structures of uranyl compounds containing mixed chromium oxidation states

The mixed-valence chromium uranyl compounds Li{sub 5}[(UO{sub 2}){sub 4}(Cr(V)O{sub 5})(Cr(VI)O{sub 4}){sub 4}](H{sub 2}O){sub 17} (1), (Mg(H{sub 2}O){sub 6}){sub 5}[(UO{sub 2}){sub 8}(Cr(V)O{sub 5}){sub 2}(Cr(VI)O{sub 4}){sub 8}] (2) and (NH{sub 4}){sub 5}[(UO{sub 2}){sub 4}(Cr(V)O{sub 5})(Cr(VI)O{sub 4}){sub 2}]H{sub 2}O{sub 11} (3) have been synthesized and characterized. Each contains an identical sheet of cation-centered polyhedra. Central to the connectivity of the sheet are four uranyl pentagonal bipyramids that share some of their equatorial vertices, giving a four-membered ring. The Cr(V) cation located near the center of this ring is coordinated by O atoms in a square pyramidal arrangement. The Cr(VI) is tetrahedrally coordinated by O atoms, and these tetrahedra link the four-membered rings of bipyramids. The mixed-valence nature of the sheet was verified by XANES, an EPR spectrum, and bond-valence analysis. Low-valence cations and H{sub 2}O groups reside between the sheets of uranyl and chromate polyhedra, where they provide linkages between adjacent sheets. - Graphical abstract: Three uranyl chromate compounds contain both pentavalent and hexavalent chromium. The unusual topology of the uranyl chromate sheet contains unusual pentavalent chromium in a square pyramidal coordination environment. Highlights: Black-Right-Pointing-Pointer The first uranyl compounds with mixed Cr valences are reported. Black-Right-Pointing-Pointer A sheet of uranyl polyhedra stabilizes pentavalent chromium. Black-Right-Pointing-Pointer Uranyl and chromate polyhedra form a topologically novel sheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex metal-rich boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68, y=1.06) with a new structure type containing B{sub 4} zigzag fragments: Synthesis, crystal chemistry and theoretical calculations

Polycrystalline samples and single crystals of the new complex boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68; y=1.06) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere and characterized by X-Ray diffraction as well as EDX measurements. The crystal structure was refined on the basis of single crystal data. The new phase, which represents a new structure type containing trans zigzag B{sub 4} fragments as well as isolated boron atoms crystallizes in the orthorhombic space group Pbam (Nr. 55) with the lattice parameters a=8.620(1) A, b=14.995(2) A and c=3.234(1) A. First-principles density functional theory calculations using the Vienna ab-initio simulation package (VASP) were performed on an appropriate structural model (using a supercell approach) and the experimental crystallographic data could be reproduced accurately. Based on this model, the density of states and crystal orbital Hamilton population (for bonding analysis) were calculated, using the linear muffin-tin orbital atomic sphere approximation (LMTO-ASA) method. According to these calculations, this metal-rich compound should be metallic, as expected. Furthermore, very strong boron-boron interactions are observed in the trans zigzag B{sub 4} fragment, which induce a clear differentiation of two types of metal-boron contacts with different strength. The observed three-dimensional metal-metal interaction is in good agreement with the predicted metallic behavior. - graphical abstract: The structure of Ti{sub 1.68(2)}Rh{sub 2.38(6)}Ir{sub 1.94(4)} B{sub 3}, a new structure type containing planar trans zigzag B{sub 4} units, is another example which illustrates the tendency of metal-rich borides to form B-B bonds with increasing boron content. Beside the B{sub 4} fragment it exhibits one-dimensional chains of titanium atoms and hold one-dimensional strings of face-sharing empty tetrahedral and square pyramidal clusters (see figure). Highlights: Black-Right-Pointing-Pointer Synthesis of a new metal-rich complex boride. Black-Right-Pointing-Pointer New structure type containing isolated boron and trans zigzag B{sub 4} units. Black-Right-Pointing-Pointer Crystallographic parameters and bond length well reproduced by theory. Black-Right-Pointing-Pointer Strong boron-boron and metal-boron interactions responsible for structural stability. Black-Right-Pointing-Pointer Three-dimensional metallic network responsible for metallic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and chemical bonding of novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16}

A novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16} has been synthesized using the high-temperature reaction method and characterized by both powder and single-crystal X-ray diffractions. The title compound crystallized in the orthorhombic crystal system (space group Immm, Z=2, Pearson symbol oI78) with fifteen crystallographically unique atomic positions in the asymmetric unit, and the lattice parameters are refined as a=4.5244(4) A, b=6.9932(6) A, and c=53.043(5) A. The complex crystal structure of the title compound can be described as a 2:1 intergrowth of two closely related compounds: La{sub 2}Li{sub 2}Ge{sub 3} (Ce{sub 2}Li{sub 2}Ge{sub 3}-type) and La{sub 3}Li{sub 4}Ge{sub 4} (Zr{sub 3}Cu{sub 4}Si{sub 4}-type) acting like 'building-blocks' along the c-axis. Six La sites are categorized into three distinct types based on the local coordination environment showing the coordination numbers of 12-14. Three unique Li sites are placed in the centers of local tetrahedra formed by four Ge atoms which eventually construct Ge{sub 2} dimers or 1-dimensional cis-/trans-Ge chains. Theoretical investigations using the tight-binding linear muffin-tin orbital (LMTO) method provide rationales for an improved structural stability and for unique local coordination geometries established by anionic elements including [LiGe{sub 4}] tetrahedra, cis-/trans-Ge chain and Ge{sub 2} dimers. - Graphical abstract: Reported is a novel ternary Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16}. The complex crystal structure can be viewed as a simple combination of two closely related known compounds acting as 'building-blocks', La{sub 2}Li{sub 2}G{sub 3} and La{sub 3}Li{sub 4}Ge{sub 4}, in a 2:1 stoichiometric ratio. Highlights: Black-Right-Pointing-Pointer A novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16} was synthesized. Black-Right-Pointing-Pointer The complex crystal structure was easily explained as a combination of two known compounds. Black-Right-Pointing-Pointer Theoretical calculations indicated that the Fermi level was located near the pseudogap.

36 MATERIALS SCIENCE↗

Synthesis and characterization of three-layered zinc phosphites containing tert-octylamine molecules with template and ligand roles

Three-layered zinc phosphites containing single monoamine molecules with different roles have been synthesized using hydro(solvo)thermal methods and characterized by single-crystal X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy. Compound 1, (C{sub 8}H{sub 17}NH{sub 3}){sub 4}Zn{sub 3}(HPO{sub 3}){sub 5}·3H{sub 2}O, consists of 20-ring layer structures sandwiched by water molecules and protonated tert-octylamine molecules. The structure of Zn(C{sub 8}H{sub 17}NH{sub 2})(HPO{sub 3}) (compound 2) is composed of 4.8{sup 2} network structures, wherein the tert-octylamines are coordinated to the Zn atom as pendant groups. Compound 3, (C{sub 8}H{sub 17}NH{sub 3}){sub 2}Zn{sub 4}(C{sub 8}H{sub 17}NH{sub 2})(HPO{sub 3}){sub 5}, was prepared in which the amine plays a dual role as both a ligand and a countercation. In addition, compound 1 is the first layered metal phosphite with large 20-ring windows. This group of substances represents the first example of the preparation of compounds in which the reactivity of incorporated single amine molecules is varied by adjusting the synthesis conditions. - Graphical abstract: The first layered metal phosphite with large 20-ring windows, (C8H17NH3)4Zn3(HPO3)5·3H{sub 2}O (1), sandwiched by water molecules and protonated tert-octylamine molecules. Highlights: • The first example of zinc phosphites contains amine molecules with template and ligand roles. • The reactivity of single amine molecules is varied by adjusting the synthesis conditions. • Compound 1 contains the largest pore opening of 20-rings in known layered metal phosphites. • Compound 3 has dual roles of amine molecules in its structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new 3D Co(II)–organic framework with acylamide-containing tetracarboxylate ligand: Solvothermal synthesis, crystal structure, gas adsorption and magnetic property

A new cobalt(II)–organic framework, [Co{sub 2}(L)(py){sub 2}(DMSO)]{sub n}• 0.5nDMF• 2nDMSO (1) [H{sub 4}L=5,5'-((naphthalene-2,6-dicarbonyl)bis(azanediyl))diisophthalic acid, py=pyridine, DMSO=dimethyl sulfoxide, DMF=N,N-dimethylformamide], has been solvothermally synthesized and characterized by elemental analysis, IR, TGA, PXRD and single-crystal X-ray crystallography. The structural analysis reveals that complex 1 is a 3D framework built from nanosized acylamide-containing tetracarboxylate ligands (L{sup 4−}) and dinuclear [Co{sub 2}(CO{sub 2}){sub 4}] secondary building units (SBUs), exhibiting a uninodal (4,4)-connected crb topology with the Schläfli symbol of (4• 6{sup 5}). The desolvated complex (1a) displays higher adsorption capability for CO{sub 2} than N{sub 2}, which may be due to the relatively strong binding affinity between the CO{sub 2} molecules and acylamide groups in the framework. The magnetic investigation shows that the dominant antiferromagnetic interaction is observed in complex 1. - Graphical abstract: A new 3D Co(II)–organic framework with nanosized acylamide-containing tetracarboxylate ligand was solvothermally synthesized and structurally characterized, its thermal stability, gas adsorption and magnetic property were studied. - Highlights: • A new 3D Co(II)–organic framework with nanosized acylamide-containing tetracarboxylate ligand has been solvothermally synthesized and characterized. • Complex 1 exhibits a uninodal (4,4)-connected crb topology. • The thermal stability, gas adsorption and magnetic property were studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolation and characterization of nanosheets containing few layers of the Aurivillius family of oxides and metal-organic compounds

Nanosheets containing few-layers of ferroelectric Aurivillius family of oxides, Bi{sub 2}A{sub n−1}B{sub n}O{sub 3n+3} (where A=Bi{sup 3+}, Ba{sup 2+} etc. and B=Ti{sup 4+}, Fe{sup 3+} etc.) with n=3, 4, 5, 6 and 7 have been prepared by reaction with n-butyllithium, followed by exfoliation in water. The few-layer samples have been characterized by Tyndall cones, atomic force microscopy, optical spectroscopy and other techniques. The few-layer species have a thickness corresponding to a fraction of the c-parameter along which axis the perovskite layers are stacked. Magnetization measurements have been carried out on the few-layer samples containing iron. Few-layer species of a few layered metal-organic compounds have been obtained by ultrasonication and characterized by Tyndall cones, atomic force microscopy, optical spectroscopy and magnetic measurements. Significant changes in the optical spectra and magnetic properties are found in the few-layer species compared to the bulk samples. Few-layer species of the Aurivillius family of oxides may find uses as thin layer dielectrics in photovoltaics and other applications. - Graphical abstract: Exfoliation of the layered Aurivillius oxides into few-layer nanosheets by chemical Li intercalation using n-BuLi followed by reaction in water. Exfoliation of the layered metal-organic compounds into few-layer nanosheets by ultrasonication. - Highlights: • Few-layer nanosheets of Aurivillius family of oxides with perovskite layers have been generated by lithium intercalation. • Few-layer nanosheets of few layered metal-organic compounds have been generated by ultrasonication. • Few-layer nanosheets of the Aurivillius oxides have been characterized by AFM, TEM and optical spectroscopy. • Aurivillius oxides containing Fe show layer dependent magnetic properties. • Exfoliated few-layer metal-organic compounds show changes in spectroscopic and magnetic properties compared with bulk materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optical, and magnetic properties of Na{sub 8}Eu{sub 2}(Si{sub 2}S{sub 6}){sub 2} and Na{sub 8}Eu{sub 2}(Ge{sub 2}S{sub 6}){sub 2}: Europium(II) quaternary chalcogenides that contain an ethane-like (Si{sub 2}S{sub 6}){sup 6−} or (Ge{sub 2}S{sub 6}){sup 6−} moiety

Two isostructural europium(II) quaternary chalcogenides, Na{sub 8}Eu{sub 2}(Si{sub 2}S{sub 6}){sub 2}, 1, and Na{sub 8}Eu{sub 2}(Ge{sub 2}S{sub 6}){sub 2}, 2, containing an ethane-like (Si{sub 2}S{sub 6}){sup 6−} or (Ge{sub 2}S{sub 6}){sup 6−} moiety have been synthesized by employing the polychalcogenide molten flux method. Single-crystal X-ray diffraction reveals that both compounds crystallize in the C2/m space group, and their structures contain layers of ([Na{sub 2}Eu{sub 2}(Si{sub 2}S{sub 6}){sub 2}]{sup 6−}){sub ∞} or ([Na{sub 2}Eu{sub 2}(Ge{sub 2}S{sub 6}){sub 2}]{sup 6−}){sub ∞} anions held together by six interlayer sodium cations to yield (Na{sub 6}[Na{sub 2}Eu{sub 2}(Si{sub 2}S{sub 6}){sub 2}]){sub ∞} and (Na{sub 6}[Na{sub 2}Eu{sub 2}(Ge{sub 2}S{sub 6}){sub 2}]){sub ∞}. Compound 2 is a semiconductor with an optical band gap of 2.15(2) eV. The temperature dependence of the magnetic susceptibility indicates that compounds 1 and 2 are paramagnetic with μ{sub eff}=7.794(1) μ{sub B} per Eu and g=1.964(1) for 1 and μ{sub eff}=8.016(1) μ{sub B} per Eu and g=2.020(1) for 2, moments that are in good agreement with the europium(II) spin-only moment of 7.94 μ{sub B}. The europium-151 Mössbauer isomer shift of 2 confirms the presence of europium(II) cations with an electronic configuration between [Xe]4f{sup 6.81} and 4f{sup 7}6s{sup 0.32}. - Graphical abstract: TOC figure caption: structure of Na{sub 8}Eu{sub 2}(Si{sub 2}S{sub 6}){sub 2} viewed along the a-axis showing the filling of A–B and B–A types of anion layers with two different types of cations. - Highlights: • Synthesis of quaternary europium chalcogenides containing ethane-like dimer. • Structural characterization employing single-crystal X-ray diffraction. • Mössbauer spectroscopy and magnetic measurements confirm presence of Eu(II)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid functional band gap calculation of SnO{sub 6} containing perovskites and their derived structures

We have studied the properties of SnO{sub 6} octahedra-containing perovskites and their derived structures using ab initio calculations with different density functionals. In order to predict the correct band gap of the materials, we have used B3LYP hybrid density functional, and the results of B3LYP were compared with those obtained using the local density approximation and generalized gradient approximation data. The calculations have been conducted for the orthorhombic ground state of the SnO{sub 6} containing perovskites. We also have expended the hybrid density functional calculation to the ASnO{sub 3}/A'SnO{sub 3} system with different cation orderings. We propose an empirical relationship between the tolerance factor and the band gap of SnO{sub 6} containing oxide materials based on first principles calculation. - Graphical abstract: (a) Structure of ASnO{sub 3} for orthorhombic ground state. The green ball is A (Ba, Sr, Ca) cation and the small (red) ball on edge is oxygen. SnO{sub 6} octahedrons are plotted as polyhedron. (b) Band gap of ASnO{sub 3} as a function of the tolerance factor for different density functionals. The experimental values of the band gap are marked as green pentagons. (c) ASnO{sub 3}/A'SnO{sub 3} superlattices with two types cation arrangement: [001] layered structure and [111] rocksalt structure, respectively. (d) B3LYP hybrid functional band gaps of ASnO{sub 3}, [001] ordered superlattices, and [111] ordered superlattices of ASnO{sub 3}/A'SnO{sub 3} as a function of the effective tolerance factor. Note the empirical linear relationship between the band gap and effective tolerance factor. - Highlights: • We report the hybrid functional band gap calculation of ASnO{sub 3} and ASnO{sub 3}/A'SnO{sub 3}. • The band gap of ASnO{sub 3} using B3LYP functional reproduces the experimental value. • We propose the linear relationship between the tolerance factor and the band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual nutraceutical nanohybrids of folic acid and calcium containing layered double hydroxides

Dual nutraceutical nanohybrids consisting of organic nutrient, folic acid (FA), and mineral nutrient, calcium, were prepared based on layered double hydroxide (LDH) structure. Among various hybridization methods such as coprecipitation, ion exchange, solid phase reaction and exfoliation-reassembly, it was found that exfoliation-reassembly was the most effective in terms of intercalation of FA moiety between Ca-containing LDH layers. X-ray diffraction patterns and infrared spectra indicated that FA molecules were well stabilized in the interlayer space of LDHs through electrostatic interaction. From the atomic force and scanning electron microscopic studies, particle thickness of LDH was determined to be varied with tens, a few and again tens of nanometers in pristine, exfoliated and reassembled state, respectively, while preserving particle diameter. The result confirmed layer-by-layer hybrid structure of FA and LDHs was obtained by exfoliation-reassembly. Solid UV–vis spectra showed 2-dimensional molecular arrangement of FA moiety in hybrid, exhibiting slight red shift in n→π* and π→π* transition. The chemical formulae of FA intercalated Ca-containing LDH were determined to Ca{sub 1.30}Al(OH){sub 4.6}FA{sub 0.74}·3.33H{sub 2}O and Ca{sub 1.53}Fe(OH){sub 5.06}FA{sub 2.24}·9.94H{sub 2}O by inductively coupled plasma-atomic emission spectroscopy, high performance liquid chromatography and thermogravimetry, showing high nutraceutical content of FA and Ca. - Highlights: • We successfully intercalated FA molecules into Ca-containing LDHs. • Exfoliation-reassembly was proven to be the most effective. • The interaction between LDH and FA were studied by FT-IR and UV–vis spectra. • Thermal stability of FA were enhanced by electrostatic interaction with LDH layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗