Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “construction type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Air Safety Spinoffs

Weight saving-even a matter of a few pounds-is an important consideration in airplane design and . construction. Boeing saved 200 pounds simply by substituting a new type of compressed gas cylinder on their 747 commercial airliners. For quickly evacuating passengers in the event of a ground emergency the 747 escape chutes allow ' passengers to slide to safety from the two-story height of the cabin deck. The chutes pop out of exitways and are automatically inflated in seconds by compressed air stored in pressure vessels. Boeing's weight saving resulted from a recent changeover to a new type of pressure vessel built by Structural Composites Industries Inc. of Azusa, Cal. The company employs technology originally developed for rocket motor casings; the cylinders are constructed by winding fibers around an aluminum liner. This technique offers high strength for very low weight-in this case 60 percent less than the pressure vessels earlier used on the 747. Another contribution to improved air safety is an underwater locator device. Called the "Pinger," it uses sonar techniques to locate aircraft crashed in water-or, more specifically, to recover the flight recorder aboard the airplane. Its recovery provides clues as to what caused the accident and suggests measures to prevent similar future occurrences. Until recently, there was no way to recover flight recorders aboard aircraft lost in water crashes. The Pinger, now serving 95 percent of the airline industry, provides an answer. Key element of the Pinger system is a small, battery-powered transmitter, or homing beacon, included as part of the recorder package. For as long as 30 days, the transmitter sends out an acoustic signal from water depths up to 20,000 feet. The other element of the system is a receiver, used by search crews to home in on the transmitter's signal. Originating as a U.S. Navy project, this device was refined and further developed by NASA's Langley Research Center to retrieve submerged nose cones from research rockets. NASA's contractor for the transmitter portion of the system was Dukane Corp., St. Charles, Ill. who subsequently developed the commercial version.

Source record↗

Variational integrators for the dynamics of thermo-elastic solids with finite speed thermal waves

This paper formulates variational integrators for finite element discretizations of deformable bodies with heat conduction in the form of finite speed thermal waves. The cornerstone of the construction consists in taking advantage of the fact that the Green–Naghdi theory of type II for thermo-elastic solids has a Hamiltonian structure. Thus, standard techniques to construct variational integrators can be applied to finite element discretizations of the problem. The resulting discrete-in-time trajectories are then consistent with the laws of thermodynamics for these systems: for an isolated system, they exactly conserve the total entropy, and nearly exactly conserve the total energy over exponentially long periods of time. Moreover, linear and angular momenta are also exactly conserved whenever the exact system does. For definiteness, we construct an explicit second-order accurate algorithm for affine tetrahedral elements in two and three dimensions, and demonstrate its performance with numerical examples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The nature and origin of type B1 and B2 Ca-Al-rich inclusions in the Allende meteorite

The Type B Ca-Al-rich inclusions in the Allende carbonaceous chondrite form a continuous range from the mineralogically concentrically zoned B1 subtype to the unzoned B2 subtype. These subtypes differ in (1) structure, texture, grain size and shape, (2) mineralogical proportions and compositions, (3) accessory mineralogy, (4) relative abundance of spinel framboids, (5) rim layering, (6) major element chemistry, and (7) degree of secondary alteration. These differences, together with observations on the crystallization of synthetic melts, suggest that the B1 inclusions crystallized relatively rapidly from molten parental material while B2 types crystallized relatively slowly close to the solidus from material that had not been completely melted. The same data are used to construct an evaporative residue model for the origin of the parental Type B materials. In the model, dust in the protosolar nebula was heated with removal of more volatile elements, leaving completely melted (Type B1) residues at the highest temperatures and incompletely melted, less highly evaporated (Type B2) residues at lower temperatures.

Wark, D. A.↗

Superconductivity in quantum wires: A symmetry analysis

We study properties of quantum wires with spin–orbit coupling and time reversal symmetry breaking, in normal and superconducting states. Electronic band structures are classified according to quasi-one-dimensional magnetic point groups, or magnetic classes. The latter belong to one of three distinct types, depending on the way the time reversal operation appears in the group elements. The superconducting gap functions are constructed using antiunitary operations and have different symmetry properties depending on the type of the magnetic point group. We obtain the spectrum of the Andreev boundary modes near the end of the wire in a model-independent way, using the semiclassical approach with the boundary conditions described by a phenomenological scattering matrix. Explicit expressions for the bulk topological invariants controlling the number of the boundary zero modes are presented in the general multiband case for two types of the magnetic point groups with real order parameters, corresponding to DIII and BDI symmetry classes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Basaltic Fissure Types on Earth: Suitable Analogs to Evaluate the Origins of Volcanic Terrains on the Moon and Mars?

Basaltic eruptive fissures of the Great Rift and surroundings on the eastern Snake River Plain of Idaho, USA, and selected volcanic features in Hawai`i, Iceland and northern Africa were surveyed for their relevancy as planetary analogs. Evaluated during field investigations and in satellite imagery for structures, physiography, and geologic setting, fissures were categorized into four broad types: (1) simple, monogenetic fissures with obvious volcanic constructs or deposits, (2) monogenetic fissures now obscured by low shields or relatively large cones, (3) polygenetic volcanic rift zones with multiple vents and deposits, and (4) compound regional fissure systems or dike swarms that comprise major rift zones or large volcanic terrains. Using this classification as an initial base, we surveyed imagery of volcanic features for likely fissure vents in two major geologic settings on the Moon: floor-fractured craters (FFCs) and mare and cryptomare provinces. Two major regions on Mars, the volcanic plains around Alba Mons and the greater Tharsis region, were also surveyed for fissure types and volcanic associations of fissure-like features. The planetary surveys suggest that the proposed classification provides a suitable analog starting point to interpret structures associated with fissure systems on the Moon and Mars. With few exceptions, our survey indicates that each of the studied terrains exhibits a dominant fissure type. Type 1 fissures, most with pyroclastic deposits, prevail in lunar FFCs and mare-like regions; whereas type 2 fissures are ubiquitous in the Tharsis region of Mars and a few exist on the Moon as low shields. Type 3 volcanic rift zones are not common on either the Moon or Mars, although they might become evident in future work on chemically evolved terrains. Type 4 fissures are inferred in mare terrains, often represented as the extensions of major linear rille networks or rimae, with possibly complex dike swarms that were buried beneath voluminous mare basalt lava flows. Likewise, numerous flood lavas on Mars are possibly associated with now-obscured or difficult to define type 4 fissure systems.

Scott S. Hughes↗

Origin of quark-lepton flavor in SO(10) with type II seesaw mechanism

Diverse mass and mixing patterns between the quarks and leptons makes it challenging to construct a simple grand unified theory of flavor. We show that SO(10) supersymmetry grand unified theories with type II seesaw mechanism giving neutrino masses provide a natural framework for addressing this issue. A simple ansatz that the dominant Yukawa matrix (the 10-Higgs coupling to matter) has rank one appears to simultaneously explain both the large lepton mixings as well as the observed quark flavor hierarchy in these models. A testable prediction of this ansatz is the neutrino mixing, U{sub e3}, which should be observable in planned long baseline experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Selection of an optimal plan for construction of a spacecraft antenna system

An attempt is made to summarize the experience of the design of antennas for various types of spacecraft: fully oriented, partially oriented, and with arbitrary orientation. Several examples of the construction of antenna systems and their characteristics are given. The optimal relationship between weight, dimension and power characteristics of on-board devices allows selection of the most acceptable versions. Questions are presented for consideration in design of optimal spacecraft antenna-feeder systems.

Prigoda, B. A.↗

Generalised Primal-Dual Grids for Unstructured Co-Volume Schemes

The generation of high-quality staggered unstructured grids is considered, leading to the development of a new optimisation-based strategy designed to construct weighted 'Regular-Power' tessellations appropriate for co-volume type numerical discretisation techniques. This new framework aims to extend the conventional Delaunay-Voronoi primal-dual structure; seeking to assemble generalised orthogonal tessellations with enhanced geometric quality. The construction of these grids is motivated by the desire to improve the performance and accuracy of numerical methods based on unstructured co-volume type schemes, including various staggered grid techniques for the simulation of fluid dynamics and hyperbolic transport. In this study, a new hybrid optimisation strategy is proposed; seeking to optimise the geometry, topology and weights associated with general, two-dimensional Regular-Power tessellations using a combination of gradient-ascent and energy-based techniques. The performance of this new method is tested experimentally, with a range of complex, multi-resolution primal-dual grids generated for various coastal and regional ocean modelling applications.

power diagrams↗

Polyakov model in ’t Hooft flux background: a quantum mechanical reduction with memory

We construct a compactification of Polyakov model on T 2 × $\mathbb{R}$ down to quantum mechanics which remembers non-perturbative aspects of field theory even at an arbitrarily small area. Standard compactification on small T 2 × $\mathbb{R}$ possesses a unique perturbative vacuum (zero magnetic flux state), separated parametrically from higher flux states, and the instanton effects do not survive in the Born-Oppenheimer approximation. By turning on a background magnetic GNO flux in co-weight lattice corresponding to a non-zero ’t Hooft flux, we show that N-degenerate vacua appear at small torus, and there are N - 1 types of flux changing instantons between them. We construct QM instantons starting with QFT instantons using the method of replicas. For example, SU(2) gauge theory with flux reduces to the double-well potential where each well is a fractional flux state. Despite the absence of a mixed anomaly, the vacuum structure of QFT and the one of QM are continuously connected. We also compare the quantum mechanical reduction of the Polyakov model with the deformed Yang-Mills, by coupling both theories to TQFTs. In particular, we compare the mass spectrum for dual photons and energy spectrum in the QM limit. We give a detailed description of critical points at infinity in the semi-classical expansion, and their role in resurgence structure.

nonperturbative effects↗

The zinc-finger transcription factor BcMF20 and its orthologs in Cruciferae which are required for pollen development

Highlights: • BcMF20 was a three-fingered protein and close to the four-fingered proteins of petunia. • The inhibition of BcMF20 led to fewer and lower rate in pollen germination. • The inhibition of BcMF20 led to lower rate in fruit setting. • BcMF20 may work in genetic pathways to act on proliferation of tapetal cells. • BcMF20 helps keep the normal development of pollens. Brassica campestris Male Fertility 20 (BcMF20) is a typical zinc-finger transcription factor that was previously isolated from flower buds of Chinese cabbage (Brassica campestris ssp. chinensis). By applying expression pattern analysis, it can be known that BcMF20 was specifically and strongly expressed in tapetum and pollen, beginning from the uninucleate stage, and was maintained during the mature-pollen stage. As BcMF20 was highly conserved in Cruciferae, it can be indicated that this zinc-finger transcription factor is important during the growth of Cruciferae. In this study, 12 C2H2-type zinc-finger TFs which shared high homology with BcMF20 were found from NCBI via BLAST. A new molecular phylogenetic tree was constructed by the comparison between BcMF20 and these 12 C2H2-type zinc-finger TFs with NJ method. By analyzing this phylogenetic tree, the evolution of BcMF20 was discussed. Then, antisense RNA technology was applied in the transgenesis of Arabidopsis thaliana to get the deletion mutants of BcMF20, so that its function during the pollen development can be identified. The results showed: BcMF20 are in the same clade with three genes from Arabidopsis. The inhibition of BcMF20 expression led to smaller amounts of and lower rate in germination of pollen and lower rate in fruit setting in certain transgenetic plants. This also led to the complete collapse of pollen grains. By SEM and TEM, pollen morphology and anther development processes were observed. In the middle uninucleate microspore stage, a relatively thin or even no primexine was formed in microspores. This may result in the malformation of the pollen wall and finally cause the deformity of pollens. Above all, it can be indicated that BcMF20 may act as a part of regulation mechanisms of TAZ1 and MS1. Together they play a role in a genetic pathway in the tapetum to act on proliferation of tapetal cells and keep the normal development of pollens.

60 APPLIED LIFE SCIENCES↗

Redundancy for electric motors in spacecraft applications

The parts of electric motors which should be duplicated in order to provide maximum reliability in spacecraft application are identified. Various common types of redundancy are described. The advantages and disadvantages of each are noted. The principal types are illustrated by reference to specific examples. For each example, constructional details, basic performance data and failure modes are described, together with a discussion of the suitability of particular redundancy techniques to motor types.

Smith, Robert J.↗

The Lyman-Continuum Fluxes and Stellar Parameters of O and Early B-Type Stars

Using the results of the most recent stellar atmosphere models applied to a sample of hot stars, we construct calibrations of effective temperature (T(sub eff)), and gravity (log(sub g)) with a spectral type and luminosity class for Galactic 0-type and early B-type stars. From the model results we also derive an empirical relation between the bolometric correction and T(sub eff) and log g. Using a sample of stars with known distances located in OB associations in the Galaxy and the Large Magellanic Cloud, we derive a new calibration of M(sub v) with spectral class. With these new calibrations and the stellar atmosphere models of Kurucz, we calculate the physical parameters and ionizing photon luminosities in the H(0) and He(0) continua for O and early B-type stars. We find substantial differences between our values of the Lyman- continuum luminosity and those reported in the literature. We also discuss the systematic discrepancy between O-type stellar masses derived from spectroscopic models and those derived from evolutionary tracks. Most likely, the cause of this 'mass discrepancy' lies primarily in the atmospheric models, which are plane parallel and hydrostatic and therefore do not account for an extended atmosphere and the velocity fields in a stellar wind. Finally, we present a new computation of the Lyman-continuum luminosity from 429 known O stars located within 2.5 kpc of the Sun. We find the total ionizing luminosity from this population ((Q(sub 0)(sup T(sub ot))) = 7.0 x 10(exp 51) photons/s) to be 47% larger than that determined using the Lyman continuum values tabulated by Panagia.

Vacca, William D.↗

Interacting chiral form field theories and $$ T\overline{T} $$-like flows in six and higher dimensions

Abstract In this paper we initiate the study of six-dimensional non-linear chiral two-form gauge theories as deformations of free chiral two-form gauge theories driven by stress-tensor$$ T\overline{T} $$ T T ¯ -like flows. To lay the background for this study, we elaborate on the relationship between different Lagrangian formulations of duality-invariantp-form theories and corresponding$$ T\overline{T} $$ T T ¯ -like flows in various dimensions. To this end we propose a new formulation which (i) is a generalization of the four-dimensional construction by Ivanov, Nurmagambetov and Zupnik (INZ) and (ii) turns into the PST formulation upon integrating out an auxiliary self-dual field. We elucidate space-time covariant properties of the PST formulation by clarifying and making use of its relation to the INZ-type formulation and to a so-called “clone” construction.

Physics↗

Quantum Interference Effects in Molecular Y- and Rhomb-Type Systems

In this paper we report the first observation of molecular population trapping in four level systems. Constructive and destructive quantum interferences between two sum-frequncy two-photon transitions in Y- and rhomb-type four-level systems, respectively, im sodium molecules have been experimentally achieved by using only one laser source. Their energy level schemes are featured by the extremely near-resonant enhancement of the equal-frequency two-photon transitions, sharing both the initial and the intermediate levels for the Y-type, and sharing both the initial and the final levels for the rhomb-type systems. Their novel spectral effects are to show seriously restrained Doppler-free UV peak at the nominal location of the induced two-photon transition with visible fluorescence in rhomb-type schems, and to show a strong extra UV peak but null visible fluorescence in the middle between the two dipole allowed two-photon transitions.

Xia, Hui-Rong↗

Determination of the 235U Mass and Enrichment within Small UF6 Cylinders via a Neutron Coincidence Well Counting System

The construction of three new uranium enrichment facilities in the United States has sparked renewed interest in the development and enhancement of methods to determine the enrichment and fissile mass content of UF6 cylinders. We describe the design and examine the expected performance of a UF6 bottle counter developed for the assay of Type 5A cylinders. The counter, as designed and subsequently constructed, is a tall passive neutron well counter with a clam-shell configuration and graphite end plugs operated in fast neutron mode. Factory performance against expectation is described. The relatively high detection efficiency and effectively 4 detection geometry provide a near-ideal measurement configuration, making the UF6 bottle counter a valuable tool for the evaluation of the neutron coincidence approach to UF6 cylinder assay. The impacts of non-uniform filling, voids, enrichment, and mixed enrichments are examined

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NORM in Building Materials: A Case Study in Releasing and Disposing of Building Debris within the DOE System - 18123

In 2013, the Office of Management and Budget issued Memorandum 2013-02, clarifying its 'Freeze the Footprint' policy. Memorandum 2013-02 requires that all federal agencies maintain or reduce their total square footage, within each subsequent year, from a FY2012 baseline. Memorandum 2013-02 also requires that total square footage remain constant with respect to the type/intended use of a building. At Los Alamos National Laboratory (LANL), this means that new construction cannot occur without demolition of equivalent (both in type and square footage) building(s). Since 2013, decommissioning and demolition of aging, unused facilities at LANL has increased. In 2016, the TA16-280 building complex was scheduled for demolition. TA16-280 is a former high explosives (HE) processing facility that consists of six buildings connected to each other via weatherproof walkways. It was constructed in the 1950's and has been subsequently used for HE shipping, receiving, and storage. Interviews with radiation protection staff suggest that some of the buildings within the complex may have been used to store depleted uranium metal parts in a non-dispersible form. It is LANL policy to conduct decommissioning surveys for radioactive materials when building history cannot confirm that a structure is radiologically non-impacted. LANL follows the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) process to develop its surveys and clear structures from radiological control. After clearance, a structure may be dispositioned as non-regulated waste, at a significant cost savings compared to regulated disposition pathways such as low-level waste. MARSAME measurements conducted in the 16-280 complex were elevated compared to reference measurements of surrogate materials, and a majority of the survey units failed to pass indistinguishable from background (IFB), which is LANL's unregulated clearance criteria. Further measurements conducted both in situ and in the laboratory indicated the presence of naturally-occurring thorium in several building materials including: poured concrete, the glaze atop ceramic blast tiles, and the porcelain enamel on the exterior of blast-proof ceiling lamps. Other than naturally-occurring thorium, there were no elevated radionuclide concentrations detected in building materials. It should be noted that there was no history of thorium use in the 16-280 complex, and the material in question was in all cases fixed to and within the building materials in question. Except in certain specific cases, such material is exempt from regulation under the Atomic Energy Act of 1954 [3], as amended, and is therefore exempt from regulation under the Nuclear Regulatory Commission, the Department of Energy, and agreement state regulatory frameworks. Despite this regulatory exemption, disposition of material from the 16-280 complex proved to be challenging, principally because local industrial landfills stipulate 'No radioactive material' in their Waste Acceptance Criteria. This disconnect between what is regulated and what is disposable creates a situation where some DOE sites find it easier to disposition property as Low Level Waste in lieu of pursuing a non-regulated disposition pathway. This presentation will explore the specifics of the 16-280 decommissioning project as well as the implications of the release/disposition disconnect for naturally occurring radioactive material and project planning at LANL. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Origin of Star Formation in Early-type Galaxies Inferred from Spatially Resolved Spectroscopy

Abstract We investigate the origin of star formation activity in early-type galaxies with current star formation using spatially resolved spectroscopic data from the Mapping Nearby Galaxies at Apache Point Observatory in the Sloan Digital Sky Survey (SDSS). We first identify star-forming early-type galaxies from the SDSS sample, which are morphologically early-type but show current star formation activity in their optical spectra. We then construct comparison samples with different combinations of star formation activity and morphology, which include star-forming late-type galaxies, quiescent early-type galaxies, and quiescent late-type galaxies. Our analysis of the optical spectra reveals that the star-forming early-type galaxies have two distinctive episodes of star formation, which is similar to late-type galaxies but different from quiescent early-type galaxies with a single star formation episode. Star-forming early-type galaxies have properties in common with star-forming late-type galaxies, which include stellar population, gas and dust content, mass, and environment. However, the physical properties of star-forming early-type galaxies derived from spatially resolved spectroscopy differ from those of star-forming late-type galaxies in the sense that the gas in star-forming early-type galaxies is more concentrated than their stars, and is often kinematically misaligned with stars. The age gradient of star-forming early-type galaxies also differs from those of star-forming late-type galaxies. Our findings suggest that the current star formation in star-forming early-type galaxies has an external origin including galaxy mergers or accretion gas from the cosmic web.

Astronomy & Astrophysics↗

Construction concept for erecting an offset-fed antenna

A design concept for the construction of an offset-fed antenna is discussed. Antennas of this type are of interest for space applications because the configuration eliminates the effects of feed and feed-support blockage. The proposed construction concept is developed around the assembly of a stiff truss substructure by pressure-suited astronauts operating in extravehicular activity (EVA) assisted by a mobile platform that moves along the structure to position the astronauts at joint locations where they can latch members in place. Construction can be accomplished from the shuttle cargo bay in the course of a normal flight or from a space station platform. The concepts demonstrates the versatility of machine assisted manned assembly and is only one of many potential applications.

Rhodes, M. D.↗