Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compute in memory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Shuttle avionics system

The avionics system of the Space Shuttle is designed in a fail operational/fail safe architecture. The guidance, navigation and control system is implemented, through the onboard Orbiter digital computers. Guidance, navigation and control sensors are triplex, while the flight control effectors are mechanized either in load sharing or quad structure. Two sets of basic flight instruments and controls are provided along with electronic interfaces to allow for multiple selection of input destination and display source selection. Communications, tracking and instrumentation subsystems are mechanized as a dual hardware design for key operational elements. The data processing system allows for quad, triplex, dual or single computer operation. The power distribution subsystem provides a triple bus system with appropriate tie elements. A functional description is given of the computer system, the data bus, the mass memory unit, the multiplexer/demultiplexer and the CRT display system.

Gardiner, R. A.↗
NASA NTRS1982

Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

Knauber, R. N.↗
NASA NTRS1987

Simplified solution for a class of fading memory filters

A fading memory filter is a least squares estimator (LSE) that applies an exponentially decaying weight to past measurements. When compared with a standard Kalman filter, its key advantages are asymptotic stability and reduced sensitivity to modeling errors. This paper derives a simple solution for a class of fading memory filters, resulting in a reduction in computational complexity. Steady state filter solutions are obtained for second- and third-order filters used in a global positioning system (GPS) receiver for high dynamic vehicles.

Statman, Joseph I.↗
NASA NTRS1988

High-Speed Multiprocessing For Engine Simulation

Parallel microprocessors have computational power and speed for realistic simulations. Interactive information bus links front-end processor and computational processors. Real-time information bus links real-time extension processor and pre-processors. Computational processor and preprocessor communicate through shared memory. System used to simulate small turboshaft engine to demonstrate potential of multiprocessing in such applications. Real-time simulations aid development of new digital engine controls enabling testing of hardware and software under realistic conditions.

Milner, Edward J.↗
NASA NTRS1988

Grid embedding technique using Cartesian grids for Euler solutions

Grid-embedding techniques are presently applied to the solutions of the Euler equations on Cartesian grids for the NACA 0012 airfoil and the multielement SKF1.1 airfoil at transonic speeds. Based on comparisons with solutions on fine grids, it is shown that the present scheme, when used in conjunction with the Runge-Kutta time-stepping scheme as well as Cartesian grids, yields reduced memory requirements and a substantial reduction in computational time, without loss of accuracy.

Micheltree, R. A.↗
NASA NTRS1988

Development of a high-speed H-alpha camera system for the observation of rapid fluctuations in solar flares

A solid-state digital camera was developed for obtaining H alpha images of solar flares with 0.1 s time resolution. Beginning in the summer of 1988, this system will be operated in conjunction with SMM's hard X-ray burst spectrometer (HXRBS). Important electron time-of-flight effects that are crucial for determining the flare energy release processes should be detectable with these combined H alpha and hard X-ray observations. Charge-injection device (CID) cameras provide 128 x 128 pixel images simultaneously in the H alpha blue wing, line center, and red wing, or other wavelength of interest. The data recording system employs a microprocessor-controlled, electronic interface between each camera and a digital processor board that encodes the data into a serial bitstream for continuous recording by a standard video cassette recorder. Only a small fraction of the data will be permanently archived through utilization of a direct memory access interface onto a VAX-750 computer. In addition to correlations with hard X-ray data, observations from the high speed H alpha camera will also be correlated and optical and microwave data and data from future MAX 1991 campaigns. Whether the recorded optical flashes are simultaneous with X-ray peaks to within 0.1 s, are delayed by tenths of seconds or are even undetectable, the results will have implications on the validity of both thermal and nonthermal models of hard X-ray production.

Kiplinger, Alan L.↗
NASA NTRS1988

An exact, closed-form expression of the integral chord-length distribution for the calculation of single-event upsets induced by cosmic rays

This paper presents a derivation of an exact closed-form expression of the integral chord-length distribution for the calculation of single-event upsets (SEUs) in an electronic memory cell, caused by cosmic rays. Results computed for two rectangular parallelepipeds using this exact expression are compared with those computed with Bradford's (1979) semiexact expression of C(x). It is found that the values of C(x) are identical for x equal or smaller than b but are vastly different for x greater than b. Moreover, while C(x) of Bradford gives reasonably accurate values of SEU rate for certain sets of computational parameters, it gives values more than 10 times larger than the correct values for other sets of parameters.

Luke, Keung L.↗
NASA NTRS1991

T on the Cray X/MP

This research was aimed at porting the T programming language, a dialect of LISP, to the Cray X/MP computer. The effort involved research into systems engineering and software engineering problems related not only to compiler design and implementation, but also to parallel computation, the X/MP being a shared-memory multiprocessor. Porting also involved the sub-tasks of retargeting the assembler, code-generator, and run-time system. A reasonably effective porting methodology that is relatively straight forward, although more difficult than table-driven approaches, has been developed. The run-time system was not ported, and thus the T programs cannot be run without explicit linking of the required run-time support. The run-time performance gain achieved in generated code was found to be disappointing. Recommendations for the achievement of higher performance are given.

Hudak, Paul↗
NASA NTRS1991

Ambient temperature recorder

A temperature data recorder, designated the Ambient Temperature Recorder (ATR-4), was developed at NASA Ames Research Center to meet particular requirements for space life sciences experiments. The small, self-contained, four-channel, battery-powered device records 32 kilobytes of temperature data over a range of -40 to +60 C at four sampling intervals ranging from 1.875 to 15 minutes. Data is stored in its internal electronic memory for later readout by a personal computer.

Russell, Larry D.↗
NASA NTRS1992

The changing nature of spacecraft operations: From the Vikings of the 1970's to the great observatories of the 1990's and beyond

Four trends in spacecraft flight operations are discussed which will reduce overall program costs. These trends are the use of high-speed, highly reliable data communications systems for distributing operations functions to more convenient and cost-effective sites; the improved capability for remote operation of sensors; a continued rapid increase in memory and processing speed of flight qualified computer chips; and increasingly capable ground-based hardware and software systems, notably those augmented by artificial intelligence functions. Changes reflected by these trends are reviewed starting from the NASA Viking missions of the early 70s, when mission control was conducted at one location using expensive and cumbersome mainframe computers and communications equipment. In the 1980s, powerful desktop computers and modems enabled the Magellan project team to operate the spacecraft remotely. In the 1990s, the Hubble Space Telescope project uses multiple color screens and automated sequencing software on small computers. Given a projection of current capabilities, future control centers will be even more cost-effective.

Ledbetter, Kenneth W.↗
NASA NTRS1994

Parallel Calculation of Sensitivity Derivatives for Aircraft Design using Automatic Differentiation

Sensitivity derivative (SD) calculation via automatic differentiation (AD) typical of that required for the aerodynamic design of a transport-type aircraft is considered. Two ways of computing SD via code generated by the ADIFOR automatic differentiation tool are compared for efficiency and applicability to problems involving large numbers of design variables. A vector implementation on a Cray Y-MP computer is compared with a coarse-grained parallel implementation on an IBM SP1 computer, employing a Fortran M wrapper. The SD are computed for a swept transport wing in turbulent, transonic flow; the number of geometric design variables varies from 1 to 60 with coupling between a wing grid generation program and a state-of-the-art, 3-D computational fluid dynamics program, both augmented for derivative computation via AD. For a small number of design variables, the Cray Y-MP implementation is much faster. As the number of design variables grows, however, the IBM SP1 becomes an attractive alternative in terms of compute speed, job turnaround time, and total memory available for solutions with large numbers of design variables. The coarse-grained parallel implementation also can be moved easily to a network of workstations.

Bischof, c. H.↗
NASA NTRS1997

FMT (Flight Software Memory Tracker) For Cassini Spacecraft-Software Engineering Using JAVA

The software engineering design of the Flight Software Memory Tracker (FMT) Tool is discussed in this paper. FMT is a ground analysis software set, consisting of utilities and procedures, designed to track the flight software, i.e., images of memory load and updatable parameters of the computers on-board Cassini spacecraft. FMT is implemented in Java.

Flight Software Cassini↗
NASA NTRS1995

Small Spacecraft Technology

Aerospace designers are aggressively pursuing new ideas in advanced technology for smaller spacecraft. NASA's 'faster, better, cheaper' philosophy is the driving force to accomplish higher level scientific exploration more efficiently. More memory and higher performance is packed into computer hardware that takes up a fraction of the space of earlier generation spacecraft. Current technology is described.

small spacecraft technology NASA philosophy scienc↗
NASA NTRS1995

The NEAT Camera Project

The NEAT (Near Earth Asteroid Tracking) camera system consists of a camera head with a 6.3 cm square 4096 x 4096 pixel CCD, fast electronics, and a Sun Sparc 20 data and control computer with dual CPUs, 256 Mbytes of memory, and 36 Gbytes of hard disk. The system was designed for optimum use with an Air Force GEODSS (Ground-based Electro-Optical Deep Space Surveillance) telescope. The GEODSS telescopes have 1 m f/2.15 objectives of the Ritchey-Chretian type, designed originally for satellite tracking. Installation of NEAT began July 25 at the Air Force Facility on Haleakala, a 3000 m peak on Maui in Hawaii.

NEAT Camera↗
NASA NTRS2006

On the Development of an Efficient Parallel Hybrid Solver with Application to Acoustically Treated Aero-Engine Nacelles

A finite element solution to the convected Helmholtz equation in a nonuniform flow is used to model the noise field within 3-D acoustically treated aero-engine nacelles. Options to select linear or cubic Hermite polynomial basis functions and isoparametric elements are included. However, the key feature of the method is a domain decomposition procedure that is based upon the inter-mixing of an iterative and a direct solve strategy for solving the discrete finite element equations. This procedure is optimized to take full advantage of sparsity and exploit the increased memory and parallel processing capability of modern computer architectures. Example computations are presented for the Langley Flow Impedance Test facility and a rectangular mapping of a full scale, generic aero-engine nacelle. The accuracy and parallel performance of this new solver are tested on both model problems using a supercomputer that contains hundreds of central processing units. Results show that the method gives extremely accurate attenuation predictions, achieves super-linear speedup over hundreds of CPUs, and solves upward of 25 million complex equations in a quarter of an hour.

Watson, Willie R.↗
NASA NTRS1983

Array processor architecture

A high speed parallel array data processing architecture fashioned under a computational envelope approach includes a data base memory for secondary storage of programs and data, and a plurality of memory modules interconnected to a plurality of processing modules by a connection network of the Omega gender. Programs and data are fed from the data base memory to the plurality of memory modules and from hence the programs are fed through the connection network to the array of processors (one copy of each program for each processor). Execution of the programs occur with the processors operating normally quite independently of each other in a multiprocessing fashion. For data dependent operations and other suitable operations, all processors are instructed to finish one given task or program branch before all are instructed to proceed in parallel processing fashion on the next instruction. Even when functioning in the parallel processing mode however, the processors are not locked-step but execute their own copy of the program individually unless or until another overall processor array synchronization instruction is issued.

Barnes, George H.↗
NASA NTRS1989

Backup control system (BUCS)

A backup software program is installed in an isolated portion in the memory of at least one of redundant computers. The backup program performs basically the same functions as the prime program but is dissimilarly programmed to prevent a common software error. Switchover to the backup program occurs either automatically in response to monitors, or manually by the operator (i.e. pilot) when he detects an anomaly.

Murphy, Richard D.↗
NASA NTRS2007

Reusable, Extensible High-Level Data-Distribution Concept

A framework for high-level specification of data distributions in data-parallel application programs has been conceived. [As used here, distributions signifies means to express locality (more specifically, locations of specified pieces of data) in a computing system composed of many processor and memory components connected by a network.] Inasmuch as distributions exert a great effect on the performances of application programs, it is important that a distribution strategy be flexible, so that distributions can be adapted to the requirements of those programs. At the same time, for the sake of productivity in programming and execution, it is desirable that users be shielded from such error-prone, tedious details as those of communication and synchronization. As desired, the present framework enables a user to refine a distribution type and adjust it to optimize the performance of an application program and conceals, from the user, the low-level details of communication and synchronization. The framework provides for a reusable, extensible, data-distribution design, denoted the design pattern, that is independent of a concrete implementation. The design pattern abstracts over coding patterns that have been found to be commonly encountered in both manually and automatically generated distributed parallel programs. The following description of the present framework is necessarily oversimplified to fit within the space available for this article. Distributions are among the elements of a conceptual data-distribution machinery, some of the other elements being denoted domains, index sets, and data collections (see figure). Associated with each domain is one index set and one distribution. A distribution class interface (where "class" is used in the object-oriented-programming sense) includes operations that enable specification of the mapping of an index to a unit of locality. Thus, "Map(Index)" specifies a unit, while "LocalLayout(Index)" specifies the local address within that unit. The distribution class can be extended to enable specification of commonly used distributions or novel user-defined distributions. A data collection can be defined over a domain. The term "data collection" in this context signifies, more specifically, an abstraction of mappings from index sets to variables. Since the index set is distributed, the addresses of the variables are also distributed.

James, Mark↗