Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computation time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

New methods for the numerical integration of ordinary differential equations and their application to the equations of motion of spacecraft

A number of hybrid methods for solving Cauchy problems are described on the basis of an evaluation of advantages of single and multiple-point numerical integration methods. The selection criterion is the principle of minimizing computer time. The methods discussed include the Nordsieck method, the Bulirsch-Stoer extrapolation method, and the method of recursive Taylor-Steffensen power series.

Banyukevich, A.↗
NASA NTRS1974

Steady incompressible potential flow around lifting bodies immersed in a fluid

The refinement was investigated of a method for evaluating the pressure distribution on a body surface of arbitrary shape in incompressible flow. The solution was obtained in terms of the velocity potential, through numerical approximations which require the use of a high speed digital computer. The box method and the modal method are described in detail, and were applied to a very thin, rectangular wing in incompressible, steady flow. The box method is found to be more practical as it is applicable to more general geometries (the modal method requires a new set of functions for each geometry), and requires less computer time (fifty percent of that required by the modal method for the same problem).

Chiuchiolo, E. A.↗
NASA NTRS1975

A nonlinear model for gas chromatograph systems

Fundamental engineering design techniques and concepts were studied for the optimization of a gas chromatograph-mass spectrometer chemical analysis system suitable for use on an unmanned, Martian roving vehicle. Previously developed mathematical models of the gas chromatograph are found to be inadequate for predicting peak heights and spreading for some experimental conditions and chemical systems. A modification to the existing equilibrium adsorption model is required; the Langmuir isotherm replaces the linear isotherm. The numerical technique of Crank-Nicolson was studied for use with the linear isotherm to determine the utility of the method. Modifications are made to the method eliminate unnecessary calculations which result in an overall reduction of the computation time of about 42 percent. The Langmuir isotherm is considered which takes into account the composition-dependent effects on the thermodynamic parameter, mRo.

Feinberg, M. P.↗
NASA NTRS1975

Numerical simulation of turbulence in the presence of shear

The numerical calculations are presented of the large eddy structure of turbulent flows, by use of the averaged Navier-Stokes equations, where averages are taken over spatial regions small compared to the size of the computational grid. The subgrid components of motion are modeled by a local eddy-viscosity model. A new finite-difference scheme is proposed to represent the nonlinear average advective term which has fourth-order accuracy. This scheme exhibits several advantages over existing schemes with regard to the following: (1) the scheme is compact as it extends only one point away in each direction from the point to which it is applied; (2) it gives better resolution for high wave-number waves in the solution of Poisson equation, and (3) it reduces programming complexity and computation time. Examples worked out in detail are the decay of isotropic turbulence, homogeneous turbulent shear flow, and homogeneous turbulent shear flow with system rotation.

Shaanan, S.↗
NASA NTRS1975

Shuttle wing panel stability analysis

The use of the NASTRAN program in the shuttle wing stability analysis is described, and details of the actual structure, the finite element idealization, and the NASTRAN results are given. A comparison of the NASTRAN results with those obtained with another computer program and with hand generated results indicates good agreement. An alternate approach for solving eigenvalue problems is illustrated and shows a considerable savings in computer time. Some emphasis is placed on the relationship of the NASTRAN analysis in the design process bringing out more clearly the contribution of the results and showing the importance of the mode plots. A deficiency in the NASTRAN plate elements when used to model structures made up of intersecting plates is discussed.

Balderes, T.↗
NASA NTRS1974

Computational aspects of maximum likelihood estimation and reduction in sensitivity function calculations

This paper discusses numerical aspects of computing maximum likelihood estimates for linear dynamical systems in state-vector form. Different gradient-based nonlinear programming methods are discussed in a unified framework and their applicability to maximum likelihood estimation is examined. The problems due to singular Hessian or singular information matrix that are common in practice are discussed in detail and methods for their solution are proposed. New results on the calculation of state sensitivity functions via reduced order models are given. Several methods for speeding convergence and reducing computation time are also discussed.

Gupta, N. K.↗
NASA NTRS1975

Convergence acceleration and shock fitting for transonic aerodynamics computations

Two problems in computational fluid dynamics are studied in the context of transonic small-disturbance theory - namely, (1) how to speed up the convergence for currently available iterative procedures, and (2) how a shock-fitting method may be adapted to existing relaxation procedures with minimal alterations in computer programming and storage requirements. The paper contributes to a clarification of error analyses for sequence transformations based on the power method (including also the nonlinear transforms of Aitken, Shanks, and Wilkinson), and to developing a cyclic iterative procedure applying the transformations. Examples testing the procedure for a model Dirichlet problem and for a transonic airfoil problem show that savings in computer time by a factor of three to five are generally possible, depending on accuracy requirements and the particular iterative procedure used.-

Hafez, M. M.↗
NASA NTRS1974

Spark chamber track finding program

A spark-chamber track-finding program has been written. The accuracy of the location of the track is good, and if the chamber contains many spurious sparks the computation time is much less than the time used by a least-squares fit routine. Multiple tracks can be found and interaction vertices can thereby be determined.

Arens, J. F.↗
NASA NTRS1974

Results from the direct combination of satellite and gravimetric data

Results have been obtained for the solution of 184 15-deg equal-area blocks directly from the analysis of satellite orbits, and from a combination of the satellite results with terrestrial gravity material. This test computation, made to verify the method, used 17,632 optical observations from ten satellites in 29 arcs averaging in length seven days. Analysis of the satellite results were made by comparing the solved for anomalies with the terrestrial anomaly set, and by developing the solved for anomalies into potential coefficients which were compared to the GEM 3 set of potential coefficients to degree 12. These comparisons indicated improvement in each solution as more arcs were added. The programs used in this solution can easily be used to solve for smaller size blocks and handle additional data types. The only limitation will be computer core availability and computer time.

Rapp, R. H.↗
NASA NTRS1975

Computational procedure for three-dimensional boundary layers on aircraft and aerospace vehicles

An implicit numerical procedure is developed to solve the full three-dimensional laminar, boundary layer equations over realistic aircraft and spacecraft configurations. This procedure utilizes splined functions in the direction normal to the surface and finite differences in the cross flow direction. Calculation of off-pitch plane attachment and detachment lines can be calculated. The solution procedure permits the incorporation of a wide variety of turbulent models and boundary conditions including; entropy layer procedures, specified surface temperatures or heat flux distributions, surface catalysis, mass addition, and the coupling to both three-dimensional inviscid codes and surface ablation codes. In addition, reasonable computing times are obtained.

Kendall, R. M.↗
NASA NTRS1975

A fast semidirect method for computing transonic aerodynamic flows

A fast, semidirect, iterative computational method, previously introduced for finite-difference solution of subsonic and slightly supercritical flow over airfoils, is extended both to apply to strongly supercritical conditions and to include full second-order accuracy in computing inviscid flows over airfoils. The nonlinear small-disturbance equations are solved iteratively by a direct, linear, elliptic solver. General, fully conservative, type-dependent difference equations are formulated, including parabolic- and shock-point transition operators that provide consistency with the integral conservation laws. These equations specialize to either first-order or to fully second-order-accurate equations. Various free parameters are evaluated for rapid convergence of the first-order scheme. Resulting pressure distributions and computing times are compared with the improved Murman-Cole line-relaxation method.

Martin, E. D.↗
NASA NTRS1975

A hybrid classifier using the parallelepiped and Bayesian techniques

A versatile classification scheme is developed which uses the best features of the parallelepiped algorithm and the Bayesian maximum likelihood algorithm. The parallelepiped technique has the advantage of being very fast, especially when implemented into a table look-up scheme; its disadvantage is its inability to distinguish and classify spectral signatures which are similar in nature. This disadvantage is eliminated by the Bayesian technique which is capable of distinguishing subtle differences very well. The hybrid algorithm developed reduces computer time by as much as 90%. A two- and n-dimensional description of the hybrid classifier is given.

Addington, J. D.↗
NASA NTRS1975

Simulation of multicorrelated random processes using the FFT algorithm

A technique for the digital simulation of multicorrelated Gaussian random processes is described. This technique is based upon generating discrete frequency functions which correspond to the Fourier transform of the desired random processes, and then using the fast Fourier transform (FFT) algorithm to obtain the actual random processes. The main advantage of this method of simulation over other methods is computation time; it appears to be more than an order of magnitude faster than present methods of simulation. One of the main uses of multicorrelated simulated random processes is in solving nonlinear random vibration problems by numerical integration of the governing differential equations. The response of a nonlinear string to a distributed noise input is presented as an example.

Wittig, L. E.↗
NASA NTRS1976

Field distribution in a thin lens

Quasi-optical formulation gives an optical field distribution by computing only two terms. First term represents geometrical optics effect, and second term represents diffraction effect; thus, mathematical expression is simplified, and considerable computer time is saved.

Chi, C. H.↗
NASA NTRS1977

Swept wing aerodynamics

Technique analyzes viscosity-dependent aerodynamic characteristics of multielement infinite swept wings in incompressible flow. Use of source distributions rather than displacement thickness to represent boundary layer effect on potential flow and of iterative technique for matrix inversion reduces computer time for overall analysis.

Dvorak, F. A.↗
NASA NTRS1975

Averaged initial Cartesian coordinates for long lifetime satellite studies

A set of initial Cartesian coordinates, which are free of ambiguities and resonance singularities, is developed to study satellite mission requirements and dispersions over long lifetimes. The method outlined herein possesses two distinct advantages over most other averaging procedures. First, the averaging is carried out numerically using Gaussian quadratures, thus avoiding tedious expansions and the resulting resonances for critical inclinations, etc. Secondly, by using the initial rectangular Cartesian coordinates, conventional, existing acceleration perturbation routines can be absorbed into the program without further modifications, thus making the method easily adaptable to the addition of new perturbation effects. The averaged nonlinear differential equations are integrated by means of a Runge Kutta method. A typical step size of several orbits permits rapid integration of long lifetime orbits in a short computing time.

Pines, S.↗
NASA NTRS1976

Combustion of hydrogen injected into a supersonic airstream (a guide to the HISS computer program)

A computer program based on a finite-difference, implicit numerical integration scheme is described for the prediction of hydrogen injected into a supersonic airstream at an angle ranging from normal to parallel to the airstream main flow direction. Results of calculations for flow and thermal property distributions were compared with 'cold flow data' taken by NASA/Langley and show excellent correlation. Typical results for equilibrium combustion are presented and exhibit qualitatively plausible behavior. Computer time required for a given case is approximately one minute on a CDC 7600. A discussion of the assumption of parabolic flow in the injection region is given which demonstrates that improvement in calculation in this region could be obtained by a partially-parabolic procedure which has been developed. It is concluded that the technique described provides an efficient and reliable means for analyzing hydrogen injection into supersonic airstreams and the subsequent combustion.

Dyer, D. F.↗