Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “combustion kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Pilot Injector Redesign to Reduce N+3 Cycle Emissions for a Gas-Turbine Combustor

An overview is given of an effort for the use of CFD analysis to complement design and configuration definition of third generation Lean-Direct Injection combustion concepts (LDI-3) for NASA’s N+3 program. The National Combustion Code (OpenNCC) was used to perform non-reacting and two-phase reacting flow computations for a three-cup, nineteen-element flame tube array with redesigned pilot injectors to improve spray and emissions characteristics when compared to a previous LDI-3 design. All computations were performed with a consistent approach to mesh-generation, spray modeling, ignition and kinetics modeling for a ‘medium-power’ cycle condition. Computational predictions of the aerodynamics of a new pre-filming pilot injector were used to arrive at an optimized aerothermal design that meets effective area and fuel-air mixing criteria. The newly designed pilot injectors were shown to provide considerable improvements in aerodynamic stability, flame-tube pattern factor and NOx emissions, when compared to the original design.

nitrogen oxides injectors↗
DOE OSTI2020

Reactive Molecular Dynamics Simulations and Quantum Chemistry Calculations To Investigate Soot-Relevant Reaction Pathways for Hexylamine Isomers

Sooting tendencies of a series of nitrogen-containing hydrocarbons (NHCs) have been recently characterized experimentally using the yield sooting index (YSI) methodology. This work aims to identify soot-relevant reaction pathways for three selected C6H15N amines, namely, dipropylamine (DPA), diisopropylamine (DIPA), and 3,3-dimethylbutylamine (DMBA) using ReaxFF molecular dynamics (MD) simulations and quantum mechanical (QM) calculations and to interpret the experimentally observed trends. ReaxFF MD simulations are performed to determine the important intermediate species and radicals involved in the fuel decomposition and soot formation processes. QM calculations are employed to extensively search for chemical reactions involving these species and radicals based on the ReaxFF MD results and also to quantitatively characterize the potential energy surfaces. Specifically, ReaxFF simulations are carried out in the NVT ensemble at 1400, 1600, and 1800 K, where soot has been identified to form in the YSI experiment. These simulations account for the interactions among test fuel molecules and pre-existing radicals and intermediate species generated from rich methane combustion, using a recently proposed simulation framework. ReaxFF simulations predict that the reactivity of the amines decrease in the order DIPA > DPA > DMBA, independent of temperature. Both QM calculations and ReaxFF simulations predict that C2H4, C3H6, and C4H8 are the main nonaromatic soot precursors formed during the decomposition of DPA, DIPA, and DMBA, respectively, and the associated reaction pathways are identified for each amine. Both theoretical methods predict that sooting tendency increases in the order DPA, DIPA, and DMBA, consistent with the experimentally measured trend in YSI. This work demonstrates that sooting tendencies and soot-relevant reaction pathways of fuels with unknown chemical kinetics can be identified efficiently through combined ReaxFF and QM simulations. Overall, predictions from ReaxFF simulations and QM calculations are consistent, in terms of fuel reactivity, major intermediates, and major nonaromatic soot precursors.

fuel decomposition↗
DOE OSTI2022

Probing O 2 dependence of hydroperoxy-butyl reactions via isomer-resolved speciation

Degenerate chain-branching mechanisms of n-alkanes are centered on the formation of hydroperoxy-alkyl radicals ($\dot{Q}$OOH), formed via $\dot{R}$ + O 2 reactions, and the ensuing competition between unimolecular decomposition and second-O 2 -addition. Quantitative measurements of partially oxidized intermediates formed via reactions of $\dot{Q}$OOH provide critical constraints that are required for accurate modeling of combustion chemistry. To examine the influence of temperature and oxygen concentration on intermediates from unimolecular decomposition of $\dot{Q}$OOH, isomer-resolved speciation measurements were conducted on n-butane oxidation at 835 Torr in a jet-stirred reactor (JSR) from 500 – 900 K. Resulting from negative-temperature coefficient behavior, cyclic ether formation peaked at two temperatures, 650 K and 800 K, which were selected for separate experiments to quantify the O 2 -dependence of species profiles using O 2 concentrations of 4.2 · 10 17 – 1.1 · 10 19 molecules cm –3 . Utilizing vacuum-ultraviolet absorption spectroscopy and electron-impact mass spectrometry, cyclic ether isomers were quantified separately, including explicit resolution of cis– and trans– isomers of 2,3-dimethyloxirane. Stereoisomers of 2-butene were also quantified explicitly. For all cyclic ethers, a common trend in O 2 -dependence emerged: species concentrations reach a maximum near 3.0 · 10 18 molecules cm –3 (equivalence ratio of 0.5). Although quantitative disparities are evident, chemical kinetics modeling qualitatively reproduces the O 2 dependence of species at 650 K. However, at 800 K, weak dependence on O 2 is predicted, which is in contrast with the measurements. Two carbonyls, diacetyl and methyl vinyl ketone, were also quantified and follow similar dependence on [O 2 ] and temperature as the cyclic ethers, which indicates some fraction forms via $\dot{Q}$OOH-mediated reactions. The discrepancies between the measured and model-predicted species profiles indicate that sub-mechanisms for important intermediates may require additional elementary reactions, including stereochemical-specific reactions, to improve the fidelity of n-alkane combustion modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An experimental and modeling study of the application of membrane contactor reactors to methanol synthesis using pure CO 2 feeds

We describe here a post-combustion CO 2 capture and utilization (CCU) technology that converts the CO 2 into methanol (MeOH), a valuable chemical, thus providing a way to monetize the carbon captured to offset process costs. Methanol synthesis (MeS) has been discussed recently for application to CCU, but thermodynamic limitations make it difficult to convert in a single pass a large CO 2 fraction. Conventional catalysts show slow kinetics in converting CO 2 -rich syngas (or pure CO 2 ) into MeOH. Our Group developed a novel MeS process, employing a membrane contactor reactor (MCR) system that attains carbon conversions significantly higher than equilibrium. Our focus here is to process pure CO 2 streams by combining the MCR with a separate reactor, which converts the CO 2 into a syngas via the reverse water gas shift (RWGS) reaction. In this preliminary effort, the RWGS reactor (RWGSR) is assumed to reach equilibrium. Additional MeS kinetic rate data are generated validating experimentally the ability of the MeS-MCR to process as a feed the RWGSR exit stream. The performance of the combined (RWGSR/MeS-MCR) system is then simulated using a recently developed MeS-MCR model. In conclusion, the findings are encouraging, and research is currently ongoing to experimentally validate the RWGSR/MeS-MCR system performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Effect of ambient conditions on the emissions from a gas turbine combustor

The effect of variations in the ambient conditions of pressure, temperature, and relative humidity upon the emissions of a gas turbine combustion are investigated. A single combustor can from a Pratt and Whitney JT8D-17 engine was run at parametric inlet conditions bracketing the actual engine idle conditions. Data were correlated to determine the functional relationships between the emissions and ambient conditions. Mathematical modelling was used to determine the mechanism for the carbon monoxide and hydrocarbon emissions. Carbon monoxide emissions were modelled using finite rate chemical kinetics in a plug flow scheme. Hydrocarbon emissions were modelled by a vaporization scheme throughout the combustor.

Kauffman, C. W.↗
NASA NTRS1998

Numerical Simulation of Combustion and Extinction of a Solid Cylinder in Low-Speed Cross Flow

The combustion and extinction behavior of a diffusion flame around a solid fuel cylinder (PMMA) in low-speed forced flow in zero gravity was studied numerically using a quasi-steady gas phase model. This model includes two-dimensional continuity, full Navier Stokes' momentum, energy, and species equations with a one-step overall chemical reaction and second-order finite-rate Arrhenius kinetics. Surface radiation and Arrhenius pyrolysis kinetics are included on the solid fuel surface description and a parameter Phi, representing the percentage of gas-phase conductive heat flux going into the solid, is introduced into the interfacial energy balance boundary condition to complete the description for the quasi-steady gas-phase system. The model was solved numerically using a body-fitted coordinate transformation and the SIMPLE algorithm. The effects of varying freestream velocity and Phi were studied. These parameters have a significant effect on the flame structure and extinction limits. Two flame modes were identified: envelope flame and wake flame. Two kinds of flammability limits were found: quenching at low-flow speeds due to radiative loss and blow-off at high flow speeds due to insufficient gas residence time. A flammability map was constructed showing the existence of maximum Phi above which the solid is not flammable at any freestream velocity.

Tien, J. S.↗
DOE OSTI2021

Mechanistic Understanding of Methane Combustion over Ni/CeO 2 : A Combined Experimental and Theoretical Approach

Catalytic oxidation of methane (CH 4 ) over nonprecious Ni/CeO 2 catalysts has received a lot of attention due to the large natural gas reserves found in North America and the prohibitive cost of palladium-based catalysts, commonly used for CH 4 oxidation. However, the catalytic mechanism of CH 4 oxidation over Ni/CeO 2 still remains unclear. Moreover, the parameters affecting the reaction rates, the interaction between nickel and CeO 2 , and the reaction intermediates are still not well understood. In this study, kinetic model fitting, CH 4 temperature-programmed reduction-mass spectroscopy (CH 4 TPR-MS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) calculations were combined to elucidate the mechanism of complete oxidation of CH 4 over Ni/CeO 2 . CH 4 TPR-MS showed that the complete oxidation of CH 4 over Ni/CeO 2 requires 55–120 °C lower compared to bare CeO 2 or Ni/quartz sand; complete oxidation of CH 4 took place when the surface oxygen species were abundant, while partial oxidation products (CO, H 2 ) were formed when the oxygen species were depleted. In situ DRIFTS showed that CH 3 , CH 2 , CO, and CO 2 were formed after CH 4 activation over Ni/CeO 2 , while CH 3 O species were not observed. Combining those findings with kinetic model fitting, a redox Mars–van Krevelen (MvK) mechanism showed the best description of the experimental observations. The MvK mechanism involves the reaction of dissociated oxygen species with gas-phase CH 4 while water inhibits the reaction rate by adsorbing on the oxidized sites. Moreover, CH 4 activation leads to the reduction of the active sites and oxygen vacancy formation followed by reoxidation of the active sites by gas-phase O 2 . A CH 4 oxidation reaction pathway over Ni/CeO 2 is proposed by DFT calculations. In summary, the findings shown here suggest that CH 4 oxidation over Ni/CeO 2 follows a redox MvK mechanism and provides guidance for the rational design of non-precious-metal catalysts for CH 4 oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhancing $\phi$-sensitivity of ignition delay times through dilution of fuel-air mixture

The high $\phi$-sensitivity (η) of ignition delay time (τ IDT ) is one of the desirable fuel properties for the high-load extension of advanced compression ignition engine. Recent studies revealed the effectiveness of a high dilution rate (x D ) for enhancing η at the engine-relevant conditions. This study aims to quantify the effect of dilution on the η of isooctane using a combined experiment-simulation approach. The ignition delay of the isooctane/air mixture was measured with an Advanced Fuel Ignition Delay Analyzer (AFIDA) over the temperature range of 623 - 923 K at 10 bar pressure with global $\phi$ = 0.3 - 0.6, with and without 28.6% of additional N 2 dilution. For precise evaluation of experimental η, the facility effect of the AFIDA experiment was characterized with three-dimensional computational fluid dynamics (3-D CFD) simulation. The temperature in the combustion chamber from 3-D CFD indicated a substantial temporal dependency, varying up to ~52 K by charge-cooling of fuel injection and heat transfer from the wall. We introduced the dimensionless number θ(t) for characterizing the temporal profile of chamber temperature. Consideration of the facility effect using θ(t) resulted in better agreement between the experimental ..eta.. and zero-dimensional (0-D) kinetics simulation. The refined η were then further utilized to quantify the effectiveness of dilution to η The extent of η enhancement with dilution strategy was maximized at the low-temperature chemistry regime, increasing η by 77% with a 28.6% dilution rate. Further analysis on the dilution effect was carried out using 0-D kinetics simulation, revealing the critical dimensionless numbers relevant to the effectiveness of dilution to η enhancement. Here, this study is the first experiment-simulation combined research to quantify the effect of dilution on η, facilitating the kinetics model refinement for better reproduction of $\phi$-sensitivity.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Ba₁₋ₓSrₓFeO₃₋ᵧ as an Improved Oxygen Carrier for Chemical Looping Air Separation: A Computational and Experimental Study

Chemical looping air separation (CLAS) is a promising method to generate pure carbon-dioxide from fuel combustion with a pure oxygen stream, which is produced through the capture, and targeted release, of oxygen from the atmosphere using a solid oxide carrier. The performance of this process depends on the redox characteristics of the oxide carrier. Using experimental oxygen-temperature-programmed desorption (TPD) and thermogravimetric analysis (TGA), the study shows that Ba₀․₇₅Sr₀․₂₅FeO₃ has improved oxygen storage capacity (OSC), oxidation, and reduction kinetics over pristine SrFeO₃ at temperatures ranging from 300-500 °C. The redox energetics computed by using first-principles density functional theory (DFT) calculations also depict the measured trend establishing it as an important descriptor of the measured performance. The Ba₁₋ₓSrₓFeO₃₋ᵧ depicts a Sr-substitution and oxygen stoichiometry induced structural phase transition from hexagonal at low temperatures to pseudo-cubic phase with higher OSC up to T=400 °C. Also, the mechanism leading to this structural phase transition is identified by performing electronic and vibrational structural calculations. This presentation was given on March 8, 2024 at the APS March Meeting in Minneapolis, MN.

Acharya, Shree Ram↗
DOE OSTI2023

Unconventional gas-phase preparation of the prototype polycyclic aromatic hydrocarbon naphthalene (C 10 H 8 ) via the reaction of benzyl (C 7 H 7 ) and propargyl (C 3 H 3 ) radicals coupled with hydrogen-atom assisted isomerization

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the interstellar medium and in meteorites such as Murchison and Allende and signify the missing link between resonantly stabilized free radicals and carbonaceous nanoparticles (soot particles, interstellar grains). However, the predicted lifetime of interstellar PAHs of some 108 years imply that PAHs should not exist in extraterrestrial environments suggesting that key mechanisms of their formation are elusive. Exploiting a microchemical reactor and coupling these data with computational fluid dynamics (CFD) simulations and kinetic modeling, we reveal through an isomer selective product detection that the reaction of the resonantly stabilized benzyl (C 7 H 7 ) and the propargyl (C 3 H 3 ) synthesizes the simplest representative of PAHs – the 10π Hückel aromatic naphthalene (C 10 H 8 ) molecule – via the novel Propargyl Addition–BenzAnnulation (PABA) mechanism. The gas-phase preparation of naphthalene affords a versatile concept of the reaction of combustion and astronomically abundant propargyl radicals with aromatic radicals carrying the radical center at the methylene moiety (aromatic-CH 2 ) as a previously passed over source of aromatics in high temperature environments thus bringing us closer to an understanding of the aromatic universe we live in.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Recombination Catalysts for Hypersonic Fuels

The goal of commercially-viable access to space will require technologies that reduce propulsion system weight and complexity, while extracting maximum energy from the products of combustion. This work is directed toward developing effective nozzle recombination catalysts for the supersonic and hypersonic aeropropulsion engines used to provide such access to space. Effective nozzle recombination will significantly reduce rk=le length (hence, propulsion system weight) and reduce fuel requirements, further decreasing the vehicle's gross lift-off weight. Two such catalysts have been identified in this work, barium and antimony compounds, by developing chemical kinetic reaction mechanisms for these materials and determining the engine performance enhancement for a typical flight trajectory. Significant performance improvements are indicated, using only 2% (mole or mass) of these compounds in the combustor product gas.

Chinitz, W.↗
DOE OSTI2023

Modeling ash deposition and shedding during oxy-combustion of coal/rice husk blends at 70% inlet O2

Abstract Co-firing rice husk (RH) and coal with carbon capture using oxy-combustion presents a net carbon negative energy production opportunity. In addition, the high fusion temperature of the non-sticky, silica rich, RH can mitigate ash deposition as well as promote shedding of deposits. To identify the optimum operating conditions, fuel particle sizes, and blend ratios that minimize ash deposition, a Computational Fluid Dynamic methodology with add-on ash deposition and shedding models were employed to predict outer ash deposition and shedding rates during co-combustion of coal/RH in AIR and O 2 /CO 2 (70/30 vol%, OXY70) oxidizer compositions. After ensuring that the fly-ash particle size distributions and particle Stokes numbers near the deposition surface were accurately represented (to model impaction), appropriate models for coal ash and RH ash viscosities that were accurate in the temperature region (1200–1300 K) of interest in this study were identified. A particle viscosity and kinetic energy (PKE) based capture criterion was enforced to model the ash capture. An erosion/shedding criterion that takes the deposit melt fraction and the energy consumed during particle impact into account was also implemented. Deposition rate predictions as well as the deposition rate enhancement (OXY70/AIR) were in good agreement with measured values. While the OXY70 scenario was associated with a significant reduction (60%–70%) in flue gas velocities, it also resulted in larger fly-ash particles. As a result, the PKE distributions of the erosive RH ash were similar in both scenarios and resulted in similar shedding rates.

Energy & Fuels↗
DOE OSTI2022

Prospects and Limitations of Predicting Fuel Ignition Properties from Low-Temperature Speciation Data

Using chemical kinetic modeling and statistical analysis, we investigate the possibility of correlating key chemical “markers”–typically small molecules–formed during very lean (φ ~ 0.001) oxidation experiments with near-stoichiometric (φ ~ 1) fuel ignition properties. One goal of this work is to evaluate the feasibility of designing a fuel-screening platform, based on small laboratory reactors that operate at low temperatures and use minimal fuel volume. Buras et al. [Combust. Flame2020,216, 472–484] have shown that convolutional neural net (CNN) fitting can be used to correlate first-stage ignition delay times (IDTs) with OH/HO2 measurements during very lean oxidation in low-T flow reactors with better than factor-of-2 accuracy. In this work, we test the limits of applying this correlation-based approach to predict the low-temperature heat release (LTHR) and total IDT, including the sensitivity of total IDT to the equivalence ratio, φ. We demonstrate that first-stage IDT can be reliably correlated with very lean oxidation measurements using compressed sensing (CS), which is simpler to implement than CNN fitting. LTHR can also be predicted via CS analysis, although the correlation quality is somewhat lower than for first-stage IDT. In contrast, the accuracy of total IDT prediction at φ = 1 is significantly lower (within a factor of 4 or worse). Furthermore, these results can be rationalized by the fact that the first-stage IDT and LTHR are primarily determined by low-temperature chemistry, whereas total IDT depends on low-, intermediate-, and high-temperature chemistry. Oxidation reactions are most important at low temperatures, and therefore, measurements of universal molecular markers of oxidation do not capture the full chemical complexity required to accurately predict the total IDT even at a single equivalence ratio. As a result, we find that φ-sensitivity of ignition delay cannot be predicted at all using solely correlation with lean low-T chemical speciation measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-efficiency catalytic reduction of residual oxygen for purification of carbon dioxide streams from high-pressure oxy-combustion systems

Pressurized oxy-combustion is a promising technology for carbon capture, utilization, and storage. For the captured CO 2 to be used for enhanced oil recovery or stored in geological formations, flue gas impurities, including residual O 2 in the CO 2 stream, must be purified to meet the purity specifications. A catalytic approach to reducing residual O 2 with CH 4 was investigated in this study. Five CoMn- and Cu-based catalysts were synthesized or acquired, and a reverse-flow fixed-bed reactor was used to assess their performance for O 2 removal from a simulated oxy-combustion flue gas at 15 bar. The impacts of the operating parameters on O 2 removal, such as temperature, gas hourly space velocity, O 2 /CH 4 ratio, and gas pressure, were investigated. Among the tested catalysts, the two CoMn catalysts were superior in both activity and selectivity, with the reaction lighting off at about 350 °C and achieving 99% O 2 removal at about 500 °C. Finally, the kinetics of the catalytic reaction is discussed, and the Mars–van Krevelen redox mechanism is deemed valid for describing the reaction pathway for the top-performing CoMn catalysts. The catalytic reaction was determined to be first order in CH 4 and zero order in O 2 under the test conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Turbulent flow and pumping in the cavity of a chemical laser

The kinetic theory of turbulent flow is employed to estimate an upper bound on the production rates of the lasing species in a free turbulent mixing layer. The maximum production rate is found to be about one third to one half of that predicted by a flame-sheet theory. The effects of turbulence scale and energy on the overall reaction rates are discussed and the gross structure of the combustion zone is determined.

Hayday, A. A.↗
NASA NTRS1974

Kinetics of the reaction of nitric oxide with hydrogen

Mixtures of NO and H2 diluted in argon or krypton were heated by incident shock waves, and the infrared emission from the fundamental vibration-rotation band of NO at 5.3 microns was used to monitor the time-varying NO concentration. The reaction kinetics were studied in the temperature range 2400-4500 K using a shock-tube technique. The decomposition of nitric oxide behind the shock was found to be modeled well by a fifteen-reaction system. A principle result of the study was the determination of the rate constant for the reaction H + NO yields N + OH, which may be the rate-limiting step for NO removal in some combustion systems. Experimental values of k sub 1 were obtained for each test through comparisons of measured and numerically predicted NO profiles.

Flower, W. L.↗
NASA NTRS1992

A numerical study of the effects of geometry on the performance of a supersonic combustor

A numerical study is conducted to investigate the effects of two combustor scale parameters, the expansion angle and the length of the constant area combustor section, on the mixing and combustion within a supersonic combustor. This study uses the SPARK 3D Navier-Stokes code. Turbulence is modeled utilizing an algebraic eddy viscosity model and the chemical mechanism is modeled with a 7-reaction, 7-species finite-rate chemistry model. The calculations show that, even at the relatively low flight Mach numbers (5-7) associated with the conditions examined, the chemical constituents are far from equilibrium, and therefore that kinetics effects are important.

Eklund, Dean R.↗