Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “co2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Seamlessly Fuel Flexible Heat Pump with Optimal Model-based Control Strategies to Reduce Peak Demand, Utility Cost and CO2 Emission

This research develops a novel hybrid fuel heat pump system for space heating of residential and small commercial buildings with built-in optimization and control. Whereas conventional dual fuel systems either run on gas or electricity at any given moment, the proposed seamlessly fuel flexible heat pump (SFFHP) simultaneously consumes gas and electricity and continuously optimizes the proportion of each. The building air flows across the heat pump condenser first and then flows across the furnace coil, and this reduces the heat pump temperature lift. The SFFHP delivers energy savings by allowing each subsystem (gas furnace and electric heat pump) to operate where it performs best to improve energy efficiency, minimize energy cost, and minimize carbon footprint. The capacities of the electric heat pump and gas furnace are continuously adjusted based on ambient conditions, utility price signals, and marginal grid emission signals. An optimal model predictive control strategy was developed with the goal of minimizing utility cost and minimizing CO2 emission. Two case studies were conducted to simulate the performance of SFFHP during the heating season in Chicago and Los Angeles, respectively. Compared with a conventional electric heat pump, SFFHP yields 33% utility cost reduction and 49% CO2 emission reduction in Chicago. Similarly, it achieves 23% utility cost reduction and 17% CO2 emission reduction in Los Angeles. Case studies demonstrate that SFFHP can deliver significant reductions in peak demand, utility cost, and CO2 emission. Due to the hybrid fuel nature of this novel equipment, user comfort will always be maintained. The fuel flexibility makes it an attractive option for demand response programs.

Li, Zhenning↗
DOE OSTI2022

High CO2 Capture Rate Cost and Performance for F- and H-Class Natural Gas Combined Cycles (NGCC)

The National Energy Technology Laboratory (NETL) is updating its study titled “Cost and Performance Baselines for Fossil Energy Plants, Volume 1: Bituminous Coal and Natural Gas to Electricity.” Revision 4 was published in 2019. Pulverized coal (PC) and natural gas combined cycle (NGCC) cases with carbon capture in that study capture carbon dioxide (CO2) at 90% efficiency. Field-testing of post-combustion CO2 capture technology as well as vendor and industry feedback on projects currently in the planning stages (including FEED projects sponsored by DOE) indicate that capture rates as high as 95% are feasible for both coal- and natural gas-fueled electricity generating units. Technology suppliers (as reflected in vendor-supplied information provided to DOE for this study that included cost and performance estimates for both NGCC (97%) and PC (99%) study cases) as well as subject matter experts acknowledge and support that solvent-based post-combustion CO2 capture technologies are capable of achieving CO2 removal rates beyond 95% on low-purity streams representative of fossil-fueled combustion; however, the relatively limited experience with design and operation of capture systems that can routinely, reliably, and economically achieve very high removal rates (e.g., 97% for NGCC flue gas) requires further study. This presentation will address performance and cost estimates for 90%, 95%, and 97% capture for F- and H-class NGCC plants. This presentation was given at the 2022 Pittsburgh Coal Conference.

Fout, Timothy↗
DOE OSTI2024

Multi-Parameter Optical Fiber Sensing of Humidity, CH4, CO2, and Corrosion

In this work, the previously demonstrated capability of the optical fiber sensor (OFS) for successful monitoring of humidity has been extended to monitor the humidity, CH4, and CO2 with different gas composition based on the strain produced along the single mode fiber (SMF) sensor. This is enabled by absorption of H2O/gases on to the commercially available polyacrylate coated jacketed portion of the fiber resulting a change in strain. Under equilibrium, a differential microstrain was observed along the jacketed portion of the SMF with N2, CH4, and CO2 at different humidity conditions, while the unjacketed portion of the fiber was used only for sensing pressure/temperature induced strain. In case of N2 at 800 psig pressure, the observed microstrain was approximately 80, 65, 50 and 35 µε at 100, 75.0, 46.8, and 23.4 RH% respectively. Comparatively, a microstrain of approximately 95 µε was observed with 100% RH CH4 which demonstrates that SMF produces a measurable CH4 response alongside water. Similarly, the observed microstrain with CO2 was approximately 105, 90, 85, 80, and 70 µε at 100, 75.0, 46.8, 23.4, and 0 RH% respectively. Linear regression and principal component analysis of these dataset provided deconvolution of the impact of strain from H2O, CH4, and CO2 enabling good cross sensitivity. Additionally, modified OFS comprising of Fe coated fiber section was employed to monitor corrosion, using Fe as corrosion proxy, under harsh corrosive environment.

Mainali, Badri↗
DOE OSTI2024

Multi-Parameter Optical Fiber Sensing of Humidity, CH4, CO2, and Corrosion

In this work, the previously demonstrated capability of the optical fiber sensor (OFS) for successful monitoring of humidity has been extended to monitor the humidity, CH4, and CO2 with different gas composition based on the strain produced along the single mode fiber (SMF) sensor. This is enabled by absorption of H2O/gases on to the commercially available polyacrylate coated jacketed portion of the fiber resulting a change in strain. Under equilibrium, a differential microstrain was observed along the jacketed portion of the SMF with N2, CH4, and CO2 at different humidity conditions, while the unjacketed portion of the fiber was used only for sensing pressure/temperature induced strain. In case of N2 at 800 psig pressure, the observed microstrain was ~80, ~65, ~50 and ~35 µε at 100, 75.0, 46.8, and 23.4 RH% respectively. Comparatively, a microstrain of ~95 µε was observed with 100% RH CH4 which demonstrates that SMF produces a measurable CH4 response alongside water. Similarly, the observed microstrain with CO2 was ~105, ~90, ~85, ~ 80, and ~70 µε at 100, 75.0, 46.8, 23.4, and 0 RH% respectively. Linear regression and principal component analysis of these dataset provided deconvolution of the impact of strain from H2O, CH4, and CO2 enabling good cross sensitivity. Additionally, modified OFS comprising of Fe coated fiber section was employed to monitor corrosion based on the increase in backscattered intensity amplitude of the light being passed once corrosion occurs.

Mainali, Badri↗
DOE OSTI2022

Corrosion of Stainless and Carbon Steel in Aqueous Piperazine for CO2 Capture

Current obstacles that prevent commercial implementation of amine-scrubbing CO2 capture are the high costs. Reducing capital costs by appropriate selection of construction materials, which requires knowledge of material corrosion performance for the process, will improve the economic feasibility of this technology. Corrosion was evaluated in three pilot plant campaigns using aqueous piperazine with the Advanced Stripper (PZAS). 316L stainless steel (SS) experienced higher corrosion than 304 SS and 2205 duplex SS, and the corrosion rate showed strong dependence on the temperature. 304 and 2205 performed well at all locations and should be good construction materials for PZAS. Degraded PZ exacerbated 316L corrosion, and removal of PZ degradation products using a carbon adsorption bed significantly reduced corrosion. Carbon steel (CS) corrosion showed a weak temperature effect because the corrosion was more dependent on the protective siderite film. The protectiveness of the films was related to fluid velocity. Ni-based alloys corroded in PZ, and the rate increased with temperature. Corrosion of C1010 CS and SS (304, 316L, 430) was measured at absorber and water wash conditions on the bench-scale. Corrosion rate decreases with increasing PZ. 8 With more than 0.003 m PZ in solution, CS has acceptable corrosion performance. Corrosion of CS increases with increasing partial pressure of CO2, suggesting loading is another dominant parameter for carbon steel corrosion. Temperature has a less significant effect than PZ concentration and loading. CS corrosion increases with increasing flow velocity at both absorber and water wash conditions. SS had little corrosion at this lower temperature. Performance of siderite (FeCO3) protective films on CS was studied at representative stripper conditions on the bench-scale. Siderite films can deposit on the surface of CS in CO2-loaded PZ solution at temperatures >100 °C and protect CS from corrosion. The protection may fail in degraded PZ. Ethylenediamine (EDA) is one of the major contributors for the loss of film protectiveness or can be the surrogate for the effect of PZ degradation on siderite film protection. A link between protectiveness and the apparent density of siderite films was discovered. The apparent density of siderite films decreases with increasing flow velocity and decreasing CO2 loading, resulting in higher corrosion of CS.

Liu, Ching-Ting↗
DOE OSTI2023

CO2 Valorization via Rewiring Carbon Metabolic Network

Energizing the world sustainably requires revolutionizing the way we harness natural resources. New renewable technologies include the microbiological upgrading of CO2, the primary greenhouse gas that causes climate change. This project aims to develop a new bioeconomy by taking up CO2 and converting it into high-value products using an autotrophic microbe. Specifically, the team constructed an acetogenic bacterium, Clostridium ljungdahlii, and developed gas fermentation processes that convert syngas (CO2/H2/CO) to the platform compound 3-hydroxybutyrate (3HB). The project has achieved several key successes, including the design and construction of 3HB genes in the gas-fermenting bacterium, the identification of a native 3HB pathway, the conversion of syngas to 3HB through strain engineering, and the improvement of the conversion through rational and iterative strain development. The optimized strain has achieved industry-relevant production rates (0.1 g/L/h) and titers (9.2 g/L), and sustained continuous gas fermentation for 3HB production for > 50 days in a bench-top gas bioreactor. The project has both industrial and scientific implications, including the exploitation of host microbes and processes to improve industrial-scale production of value-added compounds from CO2, and the promotion of gas fermentation technology. The team is also strengthening R&D synergies with other teams and industrial partners in the CO2 consortium, developing cutting-edge approaches for rapid and rational engineering of gas-fermenting hosts, and dissecting the thermodynamics and kinetics of processes for biological syngas valorization. So far, one patent application and one research article have resulted from this work, and the team anticipates additional significant outcomes from this project.

3-hydroxybutyrate↗
NASA NTRS2009

Monitoring Exchange of CO2 - A KISS Workshop Report 2009

The problem and context: Can top-down estimates of carbon dioxide (CO2) fluxes resolve the anthropogenic emissions of China, India, the United States, and the European Union with an accuracy of +/-10% or better?The workshop "Monitoring Exchange of Carbon Dioxide" was convened at the Keck Institute for Space Studies in Pasadena, California in February 2010 to address this question. The Workshop brought together an international, interdisciplinary group of 24 experts in carbon cycle science, remote sensing, emissions inventory estimation, and inverse modeling. The participants reviewed the potential of space-based and sub-orbital observational and modeling approaches to monitor anthropogenic CO2 emissions in the presence of much larger natural fluxes from the exchange of CO2 between the land, atmosphere, and ocean. This particular challenge was motivated in part by the NRC Report "Verifying Greenhouse Gas Emissions" [Pacala et al., 2010]. This workshop report includes several recommendations for improvements to observing strategies and modeling frameworks for optimal and cost-effective monitoring of carbon exchange

Greenhouse Gas Emissions↗
DOE OSTI2020

Geochemical narrowing of cement fracture aperture during multiphase flow of supercritical CO2 and brine

For carbon capture and storage operations, wells are used as a necessary conduit for injecting CO2 at depth, but they can also act as leakage conduits if the cement seals are compromised. The specific objective of this research was to investigate the nature of self-healing of a fracture within cement under multiphase flow of CO2 and brine, and to compare this to a newly developed model. This was accomplished through a laboratory investigation, flowing reacting supercritical CO2 and brine through a cement fracture with multiphase flow. The influent end of the fracture was degraded as evidenced by the formation of cracks across the surface. At the effluent end of the fracture, the initial aperture of 137 µm was reduced to 50 µm. This reduction by 87 µm was similar to results from a recently developed model tested in this study, which predicted an aperture reduction of 80 µm. Our results demonstrated that the model accurately predicted the reactions which occurred in this multiphase flow system.

wellbore, cement, fracture, multiphase-flow, super↗
DOE OSTI2021

Alteration of Fractured Foamed Cement Exposed to CO2-Saturated Water: Implications for Well Integrity

Geologic CO2 storage (GCS) is a method to mitigate the adverse impact of global climate change. Potential leakage of CO2 from fractured cement at the wellbore poses a risk to the feasibility of GCS. Foamed cement is widely applied in deepwater wells where fragile geologic formations cannot support the weight of conventional cement. Thus, it is critical to know whether fractures in foamed cement self-seal in a similar manner as conventional cement systems. This study is the first to investigate the changes in physical and chemical attributes of foamed cement under dynamic flow conditions using CO2-saturated water. Self-sealing of fractures in the cement was observed at a solution flow rate of 0.1 mL/min and a pressure of 6.9 MPa. The formation of CaCO3 precipitates in pore spaces and fractures led to a decrease in permeability by 1 order of magnitude. The extents of self-sealing in foamed cement samples, specifically the 20 and 30% air volume formulations, were similar to that of conventional cements. We attribute this to the greater alteration depth in the foamed cement, which compensated for the reduced availability of Portlandite and higher initial porosity. The results can be used to evaluate the risk of leakage associated with foamed cement.

Geologcial Carbon Storage, Well Integrity in CO2 S↗
DOE OSTI2022

Ru-promoted perovskites as effective redox catalysts for CO2 splitting and methane partial oxidation in a cyclic redox scheme

The current study reports AxA’1-xByB’1-yO3- perovskite redox catalysts (RCs) for CO2-splitting and methane partial oxidation (POx) in a cyclic redox scheme. Strontium (Sr) and iron (Fe) were chosen as A and B site elements with A’ being lanthanum (La), samarium (Sm) or yttrium (Y), and B’ being manganese (Mn), or titanium (Ti) to tailor their equilibrium oxygen partial pressures (P_(O_2 ) s) for CO2-splitting and methane partial oxidation. DFT calculations were performed for predictive optimization of the oxide materials whereas experimental investigation confirmed the DFT predicted redox performance. The redox kinetics of the RCs improved significantly by 1 wt.% ruthenium (Ru) impregnation without affecting their redox thermodynamics. Ru impregnated LaFe0.375Mn0.625O3 (A=0, A’=La, B=Mn, and B’=0) was the most promising RC in terms of its superior redox performance (CH4/CO2 conversion >90% and CO selectivity~ 95%) at 800oC. Long-term redox testing over Ru impregnated LaFe0.375Mn0.625O3 indicated stable performance during the first 30 cycles following with a ~25% decrease in the activity during the last 70 cycles. Air treatment was effective to reactivate the redox catalyst. Detailed characterizations revealed the underlying mechanism for redox catalyst deactivation and reactivation. Furthermore, this study not only validated a DFT guided mixed oxide design strategy for CO2 utilization but also provides potentially effective approaches to enhance redox kinetics as well as long-term redox catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO2 upgrading into bioproducts using a two-step abiotic–biotic system

The valorization of CO2 to chemicals beyond C1-2 products is receiving significant interest; however, the direct electrosynthesis of Cn molecules (n > 4) remains a challenge. Here, we present a two-step abiotic-biotic system for upgrading CO2 into the biopolymer, poly(3-hydroxybutyrate). In the electrolysis system, CO2 is converted into C2 oxygenates using a Cu-Ag tandem electrocatalyst. The electrolysis process generates a liquid stream containing ~ 200 mM acetate in a bio-compatible electrolyte. This electrosynthesized acetate is then fed to a bioreactor, where the substrate is upgraded by Cupriavidus necator to biopolymer with a maximum rate of 32 ± 3.5 mg L-1 h-1. We further demonstrate the purification of the resulting biopolymer into a powder. The high productivity of the abiotic-biotic system demonstrates its feasibility for sustainable chemical manufacturing.

CO2 upgrading↗
DOE OSTI2025

Multistep catalytic abiotic CO2 conversion to sugars through C1 intermediates

Carbon dioxide (CO2) to multicarbon (Cn) upgrading for commodity chemicals, fuel production, or artificial food synthesis using renewable energy input is a golden target for researchers in sustainable carbon emission reduction. Here, we explore and analyze a flexible modular roadmap for the task, utilizing sequential electro-, photo-, and organocatalysis to develop a strategy for CO2 conversion using the key and elusive formaldehyde precursor of interest for sugar generation. We study the electrochemical carbon dioxide reduction reaction to methanol in a flow cell and its discontinuous photooxidation to formaldehyde (PMOR) with excellent selectivity. Utilizing a highly active N-heterocyclic carbene catalyst enables tunable generation of C4-C6 aldoses without undesirable byproducts, with carbon conversion yield reaching 60 to 80% for desired pentose, tetrose, and triose product mixtures and over 20% for hexose. This approach presents a roadmap for CO2 valorization, aiming to bridge carbon waste streams with sustainable sugar synthesis and opening broad avenues for green chemical production.

CO2 valorization↗
DOE OSTI2023

The starch-deficient plastidic PHOSPHOGLUCOMUTASE mutant of the constitutive crassulacean acid metabolism (CAM) species Kalanchoë fedtschenkoi impacts diel regulation and timing of stomatal CO2 responsiveness

Abstract Background and Aims Crassulacean acid metabolism (CAM) is a specialized type of photosynthesis characterized by a diel pattern of stomatal opening at night and closure during the day, which increases water-use efficiency. Starch degradation is a key regulator of CAM, providing phosphoenolpyruvate as a substrate in the mesophyll for nocturnal assimilation of CO2. Growing recognition of a key role for starch degradation in C3 photosynthesis guard cells for mediating daytime stomatal opening presents the possibility that starch degradation might also impact CAM by regulating the provision of energy and osmolytes to increase guard cell turgor and drive stomatal opening at night. In this study, we tested the hypothesis that the timing of diel starch turnover in CAM guard cells has been reprogrammed during evolution to enable nocturnal stomatal opening and daytime closure. Methods Biochemical and genetic characterization of wild-type and starch-deficient RNAi lines of Kalanchoë fedtschenkoi with reduced activity of plastidic phosphoglucomutase (PGM) constituted a preliminary approach for the understanding of starch metabolism and its implications for stomatal regulation in CAM plants. Key Results Starch deficiency reduced nocturnal net CO2 uptake but had negligible impact on nocturnal stomatal opening. In contrast, daytime stomatal closure was reduced in magnitude and duration in the starch-deficient rPGM RNAi lines, and their stomata were unable to remain closed in response to elevated concentrations of atmospheric CO2 administered during the day. Curtailed daytime stomatal closure was linked to higher soluble sugar contents in the epidermis and mesophyll. Conclusions Nocturnal stomatal opening is not reliant upon starch degradation, but starch biosynthesis is an important sink for carbohydrates, ensuring daytime stomatal closure in this CAM species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Offshore CO2 Saline Storage Calculator

The Offshore CO2 Saline Storage Calculator is a data-driven tool that applies the adapted DOE CO2 Methodology to calculate all potential distributions of offshore storage efficiency and resource potential at multiple spatial scales for saline formations. The tailored methodology include accounting for changing CO2 density with the overlying water column and sediment differences in unlithified, porous, and permeable offshore saline formations. The latest release of the tool and a tutorial are available in the tools public GitHub repository. We recommend testing out this application using data from the Petrophysical Well Log Interpretation Dataset, which spans the northern Gulf of Mexico and is available on EDX here: https://edx.netl.doe.gov/dataset/petrophysical-well-log-interpretation-dataset

calculator↗
DOE OSTI2021

Pulsed Neutron Capture for monitoring CO2 Storage with Enhanced Oil Recovery in Northern Michigan

Pulsed neutron capture (PNC) logging has been used as part of the Midwest Regional Carbon Sequestration Partnership (MRCSP) monitoring of CO2 injection and storage during assessment of enhanced oil recovery (EOR) in several northern Niagaran trend reefs in Michigan. A total of four reefs were selected for these studies to monitor CO2 migration and to test the viability and effectiveness of the PNC technology on reefs in various stages (depleted, active and new reefs) of CO2-EOR activities.

Bagley↗
DOE OSTI2024

Smart CO2 Transport-Route Planning Tool

NETL has developed the Smart CO2 Transport-Route Planning Tool to help inform energy transport planning and development. The stand-alone, open-source tool applies data-driven, geospatial and machine-learning informed logic to identify potential routes or evaluate existing corridors based on current legislation, best construction practices, and more. Underpinning the interactive tool, is NETL’s CO2 Transport Planning Database (https://edx.netl.doe.gov/dataset/ccs-pipeline-route-planning-database-v1). This geospatial resource contains more than 70 gigabytes of data representing more than 60 critical factors for the spatial routing of CO2 transport, including land use requirements, existing infrastructure, high consequence areas, and natural hazards.

Bipartisan Infrastructure Law↗
DOE OSTI2025

FracML: A Machine Learning Based Tool to Quantify Reservoir Scale Fracture Network for CO2 Storage

Poster on “FRACML: A Machine Learning Based Tool to Quantify Reservoir Scale Fracture Network for CO2 Storage” for the CCUS 2025 conference held in Houston, Texas March 3-5, 2025. The accurate characterization of subsurface fracture networks is essential for the secure operation of carbon capture, utilization, and storage (CCUS) projects. A thorough understanding of the spatial distribution of subsurface faults and fractures is crucial for predicting CO2 plume evolution and minimizing risks such as potential leakage into overlying formations or induced seismicity. In this context, robust fracture network quantification plays a pivotal role in reservoir management, providing the data necessary to fine-tune operational parameters, and ensure the environmental and economic viability of CCUS projects. As part of the U.S. Department of Energy’s SMART (Science-informed Machine Learning for Accelerating Real-time Decisions in Subsurface Applications) initiative, we focused on the development and application of a machine learning-based tool (FRACML) designed to quantify and map fracture networks using real-world (non-synthetic) data from an active CO2 injection site. Our objective is to demonstrate the utility of this tool in improving operational efficiency and safety across CCUS sites.

artifical intelligence / machine learning (AI/ML)↗
DOE OSTI2025

Electrocatalyst Engineering and Device Benchmarking for Low Temperature CO2 Electrolysis

This oral presentation is for an invited talk in Division of Energy and Fuels, Symposium: "CO2 Conversion and Utilization-II: Electrochemical CO2 Conversion to Fuels and Valuable Chemicals" at ACS Spring 2025 (March 23-27, 2025) in San Diego, CA. The presentation will primarily discuss the crucial role of electrocatalyst design in the CO2 conversion to sustainable, carbon-neutral gas and liquid products. Some preliminary benchmarking studies of off-the-shelf electrocatalysts will be also shown in different device configurations to achieve good selectivity at industrially relevant current densities.

CO2 electrochemical reduction↗