Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Correlations of supersonic boundary-layer transition on cones including effects of large axial variations in wind-tunnel noise

Transition data on sharp tip cones in two pilot low disturbance wind tunnels at Mach numbers of 3.5 and 5 were correlated in terms of noise parameters with data from several conventional wind tunnels and with data from supersonic flight tests on a transition cone. The noise parameters were developed to account for the large axial variations of the free stream noise and the very high frequency noise spectra that occurred in the low disturbance tunnels for some test conditions. The noise could be varied in these tunnels from high levels, approaching those in conventional tunnels, to extremely low levels. The correlations indicated that transition in the low disturbance tunnels was dominated by the local stream noise that was incident on the cone boundary layer unstream of the neutral stability point. The correlation results also suggested that high frequency components of the low disturbance tunnel noise spectra had significant effects on transition when the noise was incident on the boundary layer both upstream and downstream of the neutral stability point.

Chen, F. J.↗
NASA NTRS2018

Impedance Eduction in a Duct Using the Linearized Euler Equations

An impedance eduction technique that is based upon a numerical solution to the linearized Euler equations coupled with the minimization of an objective function is presented. The linearized Euler equations are solved numerically using a cubic finite element method and the minimum of the objective function is obtained via a gradient based optimizer. The mean flow is allowed to have a gradient in two coordinate directions and the impedance of the liner may vary arbitrarily over the liner surface. A new regularized wall impedance boundary condition presented by Rienstra which contains the effects of the mean boundary layer thickness is implemented. Impedances are educed for a perforate over honeycomb liner using test data acquired in the Langley Grazing Flow Impedance Tube. The impedance of the liner is educed both with an upstream source and a downstream source. The method is validated by comparing the educed impedance to a benchmark method. The primary conclusion of the study is that the impedances educed for upstream and downstream sources are not well matched and that the primary effect of the boundary thickness is to reduce the resistance of the liner.

Watson, Willie R.↗
NASA NTRS1983

Algebraic grid generation with corner singularities

A simple noniterative algebraic procedure is presented for generating smooth computational meshes on a quadrilateral topology. Coordinate distribution and normal derivative are provided on all boundaries, one of which may include a slope discontinuity. The boundary conditions are sufficient to guarantee continuity of global meshes formed of joined patches generated by the procedure. The method extends to 3-D. The procedure involves a synthesis of prior techniques stretching functions, cubic blending functions, and transfinite interpolation - to which is added the functional form of the corner solution. The procedure introduces the concept of generalized blending, which is implemented as an automatic scaling of the boundary derivatives for effective interpolation. Some implications of the treatment at boundaries for techniques solving elliptic PDE's are discussed in an Appendix.

Vinokur, M.↗
NASA NTRS2000

Validation and Development of the GPCP Experimental One-Degree Daily (1DD) Global Precipitation Product

The One-Degree Daily (1DD) precipitation dataset has been developed for the Global Precipitation Climatology Project (GPCP) and is currently in beta test preparatory to release as an official GPCP product. The 1DD provides a globally-complete, observation-only estimate of precipitation on a daily 1 deg. x 1 deg. grid for the period 1997 through early 2000 (by the time of the conference). In the latitude band 40N-40S the 1DD uses the Threshold-Matched Precipitation Index (TMPI), a GPI-like IR product with the pixel-level T(sub b) threshold and (single) conditional rain rate determined locally for each month by the frequency of precipitation in the GPROF SSM/I product and by, the precipitation amount in the GPCP monthly satellite-gauge (SG) combination. Outside 40N-40S the 1DD uses a scaled TOVS precipitation estimate that has month-by-month adjustments based on the TMPI and the SG. Early validation results are encouraging. The 1DD shows relatively large scatter about the daily validation values in individual grid boxes, as expected for a technique that depends on cloud-sensing schemes such as the TMPI and TOVS. On the other hand, the time series of 1DD shows good correlation with validation in individual boxes. For example, the 1997-1998 time series of 1DD and Oklahoma Mesonet values in a grid box in northeastern Oklahoma have the correlation coefficient = 0.73. Looking more carefully at these two time series, the number of raining days for the 1DD is within 7% of the Mesonet value, while the distribution of daily rain values is very similar. Other tests indicate that area- or time-averaging improve the error characteristics, making the data set highly attractive to users interested in stream flow, short-term regional climatology, and model comparisons. The second generation of the 1DD product is currently under development; it is designed to directly incorporate TRMM and other high-quality precipitation estimates. These data are generally sparse because they are observed by low-orbit satellites, so a fair amount of work must be devoted to analyzing the effect of data boundaries. This work is laying, the groundwork for effective use of the NASA Global Precipitation Mission, which will have full Global coverage by low-orbit passive microwave satellites every three hours.

Huffman, George J.↗
NASA NTRS2008

Boundary Layer Receptivity due to Roughness and Freestream Sound for Supersonic Flows over Axisymmetric Cones

The receptivity of supersonic boundary layers due to the interaction of a two-dimensional acoustic wave with a three-dimensional roughness is numerically investigated over a 5-degree sharp tipped straight cone at a free stream Mach number of 3.5 and a high Reynolds number of 10(exp 6)/inch. Both the steady and unsteady solutions are obtained by solving the full Navier-Stokes equations using the fifth-order accurate weighted essentially non-oscillatory (WENO) scheme for spatial discretization and using third-order total-variation-diminishing (TVD) Runge-Kutta scheme for temporal integration. The simulations are performed with different roughness heights and roughness locations. The steady computations with the roughness reveal that the perturbations induced by the roughness remain very close to the wall and do not penetrate to the outer part of the boundary layer. The effects of the roughness persist for about 10 boundary layer thicknesses downstream of each element. The unsteady simulation shows the generation of unstable three-dimensional first mode disturbances within a short distance from the roughness. However, the amplitudes of the instability waves are very small near the neutral point, on the order of 10(exp -4) compared to the free stream disturbances. The receptivity coefficients due to the roughness elements located very close to the tip are one order of magnitude smaller than those due to the roughness elements located closer to the neutral point.

Balakumar, P.↗
NASA NTRS1984

Heat transfer effects of longitudinal vortices embedded in a turbulent boundary layer

The results of tests with five different vortex generators in an open circuit wind tunnel are reported. The tests were performed to enhance the data base on heat transfer effects of an isolated longitudinal vortex in a turbulent boundary layer and the effects of embedded vortex pairs. A heated plate was set in the boundary layer downstream of a tripping mechanism and measurements were made of the free stream and surface temperatures using thermocouples. A four-hole cobra probe assayed the velocity profiles. Trials revealed that vortex pairs with scales larger than the boundary layer thickness induce significant changes in the Stanton number. A 15 percent Stanton number increase was produced by isolated vortices, which swept cool free stream fluid into the near-wall region.

Eibeck, P. A.↗
NASA NTRS2011

Boundary Layer Transition over Blunt Hypersonic Vehicles Including Effects of Ablation-Induced Out-Gassing

Computations are performed to study the boundary layer instability mechanisms pertaining to hypersonic flow over blunt capsules. For capsules with ablative heat shields, transition may be influenced both by out-gassing associated with surface pyrolysis and the resulting modification of surface geometry including the formation of micro-roughness. To isolate the effects of out-gassing, this paper examines the stability of canonical boundary layer flows over a smooth surface in the presence of gas injection into the boundary layer. For a slender cone, the effects of out-gassing on the predominantly second mode instability are found to be stabilizing. In contrast, for a blunt capsule flow dominated by first mode instability, out-gassing is shown to be destabilizing. Analogous destabilizing effects of outgassing are also noted for both stationary and traveling modes of crossflow instability over a blunt sphere-cone configuration at angle of attack.

Li, Fei↗
NASA NTRS1984

Turbulent flow through screens

A detailed experimental investigation has been carried out on the effects of different types of screens on turbulent flow, in particular turbulent boundary layers. The effect of a screen on a turbulent boundary layer is to give it a 'new lease of life'. The boundary layer turbulence is reorganized and the thickness reduced, thus making it less susceptible to separation. The aerodynamic properties of plastic screens are found to differ significantly from those of the conventional metal screens, evidently because of differences in the weaving properties. The 'overshoot' in mean velocity profile near the boudnary layer edge is shown to be a result of the effect of screen inclination on pressure drop coefficient. A more accurate formulation for the deflection coefficient of a screen is also proposed.

Mehta, R. D.↗
NASA NTRS1983

Annulus wall boundary layer development in a compressor stage, including the effects of tip clearance

The end-wall boundary layer development in a compressor stage, including the inlet guide vane (IGV) passage and the rotor passage, was measured. The measurement upstream of the rotor and inside the IGV passage were carried out with a five-hole probe. The data (blade-to-blade) inside the IGV passage were carried out with a five-hole probe. The data (blade-to-blade) inside the rotor passage were measured using a three-sensor rotating hot-wire below the tip clearance region and "V' configuration probe inside the clearance region. The rotor exit measurements (blade-to-blade) were acquired with a laser Doppler velocimeter. The velocity profiles and the integral properties are presented and interpreted. The boundary layer is comparatively well behaved up to the leading edge of the rotor, beyond which complex interactions result in very unconventional profiles. The momentum thicknesses decrease in the leakage flow region of the rotor. The momentum thicknesses and the limiting streamline angles predicted from a momentum integral technique agree well with the data up to the leading edge of the rotor.

Lakshminarayana, B.↗
NASA NTRS1982

Correlation and prediction of thermophoretic and inertial effects on particle deposition from non-isothermal turbulent boundary layers

The problem of small particle deposition which can cause hot stage corrosion and/or fouling in combustion turbines operating on fuels containing ash or inorganic salts is investigated. Two boundary layer transport phenomena are shown to assume importance in these cases: particle thermophoresis (migration down a temperature gradient) and particle inertia. Thermophoretic and eddy transport across turbulent boundary layers without and with particle inertia effects are quantitatively analyzed. The effects of streamwise blade curvature on particle transport across turbulent boundary layers are determined. It is shown that these phenomena destroy the analogy between mass and heat transfer or mass and momentum transfer. Also studied are the effects on particle deposition of distributed or localized wall blowing, surface roughness, and mainstream turbulence.

Rosner, D. E.↗
NASA NTRS1977

Effects of air pollution on thermal structure and dispersion in an urban planetary boundary layer

The short-term effects of urbanization and air pollution on the transport processes in the urban planetary boundary layer (PBL) are studied. The investigation makes use of an unsteady two-dimensional transport model which has been developed by Viskanta et al., (1976). The model predicts pollutant concentrations and temperature in the PBL. The potential effects of urbanization and air pollution on the thermal structure in the urban PBL are considered, taking into account the results of numerical simulations modeling the St. Louis, Missouri metropolitan area.

Viskanta, R.↗
NASA NTRS2007

Boundary Layer Transition on an Axial Compressor Stator Blade-Wake Passing and Freestream Turbulence Effects

Quantitative observations of transitional boundary layers in regions of strong flow deceleration on an axial compressor stator blade are reported. Measurements are obtained at a fixed chordwise position, and the blade incidence was varied by changing the compressor throughflow so as to move the transition region relative to the stationary probe. It was thus possible to observe typical boundary layer behavior at various stages of transition in the turbomachine environment. The range of observations covers separating laminar flow at transition onset, and reattachment of intermittently turbulent periodically separated shear layers.

Walker, G. J.↗
NASA NTRS1984

Laser Doppler velocimeter measurement in the tip region of a compressor rotor

The axial and tangential velocity components near the tip region of a compressor rotor were measured by a laser Doppler velocimeter. The measurements were taken at 25 radial locations in the outer twenty percent of the blade span and at 10 axial locations upstream, inside and at the exit of the rotor. The results are interpreted to derive the behavior of the leakage flow, annulus wall boundary layer growth, inviscid effects and the rotor wake decay characteristics in the tip region. The inviscid and annulus wall boundary layer effects dominate up to quarter chord, beyond which the leakage phenomena has a major influence in altering the flow characteristics in the outer ten percent of the blade span. The annulus wall boundary layer undergoes drastic change through the passage. The velocity field measured near the leading edge reveals the effects of rapid acceleration near the suction surface and the stagnation point on the pressure surface.

Murthy, K. N. S.↗
NASA NTRS1993

Interaction strength and model geometry effects on the structure of crossing-shock wave/turbulent boundary-layer interactions

The flowfield structure of a range of symmetric crossing-shock wave/turbulent boundary-layer interactions of varying strength is presented. The test geometry, consisting of a symmetric pair of opposing sharp fins at angle of attack, alpha, mounted to a flat plate, is studied experimentally for a range of alpha from 7 to 15 degrees at Mach numbers of 3 and 4. Results reveal that the basic flowfield shock structure remains similar in nature over the range of interaction strengths examined, with the only changes being in the scale and location of the various features present. The separated flow regions are classified as being either completely or partially separated, the completely separated case being the one in which the entire incoming boundary layer separates from the plate surface. For the current experiments, all but the weakest of the interactions exhibited complete boundary layer separation. Finally, the effects of model geometry are analyzed by comparing data for shock generators of varying lengths, with the results showing no evidence of upstream influence due to the shock generator trailing edges.

Garrison, T. J.↗
NASA NTRS1992

Robustness of Spann-Wilson segmentation on SAR imagery

The performances of the Spann-Wilson algorithm on simulated synthetic aperture radar (SAR) images with varying degrees of speckle (one to four looks and varying amounts of white noise) is described. One hundred forty-eight test images are considered, of which the algorithm segmented most without any adjustment to the algorithm's parameters. The effect of speckle on fractal boundaries is studied. The effect of varying multiplicative and additive noise distributions for a fixed set of segmentation parameters is examined. The modified Spann-Wilson algorithm on four-look imagery is evaluated.

Daida, Jason M.↗
NASA NTRS2001

Qualitative Assessment of the Acoustic Disturbance Environment in the NASA LaRC 20-Inch MACH 6 Wind Tunnel

An experimental investigation was conducted on a 5-degree-half-angle cone with a flare in a conventional Mach 6 wind tunnel to examine the effect of facility noise on boundary layer transition. The effect of tunnel noise was inferred by comparing transition onset locations determined from the present test to that previously obtained in a Mach 6 quiet tunnel. Together, the two sets of experiments are believed to represent the first direct comparison of transition onset between a conventional and a quiet hypersonic wind tunnel using a common test model. In the present conventional hypersonic tunnel experiment, adiabatic wall temperatures were measured and heat transfer distributions were inferred on the cone flare model at zero degree angle of attack over a range of length Reynolds numbers (2 x 10(exp 6) to 10 x 10(exp 6)) which resulted in laminar and turbulent flow. Wall-to-total temperature ratio for the transient heating measurements and the adiabatic wall temperature measurements were 0.69 and 0.86, respectively. The cone flare nosetip radius was varied from 0.0001 to 0.125-inch to examine the effects of bluntness on transition onset. At comparable freestream conditions the transition onset Reynolds number obtained on the cone flare model in the conventional "noisy" tunnel was approximately 25% lower than that measured in the low disturbance tunnel.

Horvath, Thomas J.↗
NASA NTRS1986

Grain boundary oxidation and an analysis of the effects of pre-oxidation on subsequent fatigue life

The effects of preoxidation on subsequent fatigue life were studied. Surface oxidation and grain boundary oxidation of a nickel-base superalloy (TAZ-8A) were studied at 600 to 1000 C for 10 to 1000 hours in air. Surface oxides were identified and the kinetics of surface oxidation was discussed. Grain boundary oxide penetration and morphology were studied. Pancake type grain boundary oxide penetrates deeper and its size is larger, therefore, it is more detrimental to fatigue life than cone-type grain boundary oxide. Oxide penetration depth, a (sub m), is related to oxidation temperature, T, and exposure time, t, by an empirical relation of the Arrhenius type. Effects of T and t on statistical variation of a (sub m) were analyzed according to the Weibull distribution function. Once the oxide is cracked, it serves as a fatigue crack nucleus. Statistical variation of the remaining fatigue life, after the formation of an oxide crack of a critical length, is related directly to the statistical variation of grain boundary oxide penetration depth.

Oshida, Y.↗