Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “below water”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Split HPWHs as an Efficient Solution for Multifamily Buildings with In-Unit Water Heaters: Preprint

A quarter of all housing units in the country are found in multifamily buildings but few efficiency innovations have been made to improve electric water heating systems in this building type. Domestic hot water in multifamily buildings can either be provided by a large central water heater or smaller in-unit water heaters. Integrated heat pump water heaters that are installed in single family homes are often a poor fit for individual multifamily units since the water heaters are often located in small internal closets. This confined space can limit the air flow to the heat pump and the cold exhaust air can cause discomfort and reduced efficiency. Split CO2 HPWHs separate the tank from the heat pump, which allows for installation location flexibility. Further, CO2 heat pumps can operate under colder ambient conditions, making them a better fit for multifamily units across a wide range of climate regions. As part of a larger project to characterize split HPWH performance, we evaluated the feasibility of installing an additional, parallel tank that could provide hot water to a second housing unit using a single CO2 heat pump. This approach would reduce the first costs of these more expensive units. Based on the high draw volume that we imposed on both tanks, the same heat pump may be able to support more tanks, depending on hot water usage. This paper will describe the split CO2 HPWH technology, how the two-tank system was controlled, and results from our laboratory evaluation.

CO2 HPWH↗
DOE OSTI2020

Evaluating Remediation Options for a Perched-Water Unit at the Hanford Site - 20378

At the U.S. Department of Energy's Hanford Site, liquid-phase waste was discharged using surface disposal features such as ponds, trenches, and cribs. These practices distributed contaminants in the subsurface, some of which are currently in the vadose zone above the groundwater. At the 200-DV-1 operable unit (OU) at the Hanford Site, a key feature is a perched-water zone. This perched-water zone contains several million liters of water contaminated with high concentrations of uranium, technetium-99 (Tc-99), and nitrate that serves as a continuing source of contamination to the underlying aquifer. Currently, a pumping system is used to remove contaminant mass from the perched-water zone. However, water extraction will become more challenging as the perched unit dewaters. As a result, residual contaminants remaining after pumping is no longer effective needs to be addressed with post-extraction mitigation approaches, appropriate monitoring, and selection of suitable remediation endpoints. Thus, a remedy evaluation needs to include the unique conditions of this perched-water zone. As part of the initial evaluation, a set of technologies have been preliminarily identified as potentially applicable to the perched-water zone, including in situ remediation technologies to sequester uranium and Tc-99 and to degrade nitrate. While there is sufficient information available for direct consideration of some of the reviewed technologies in a feasibility study, five in situ remediation technologies were identified as needing additional information on their effectiveness under the geochemical and contaminant conditions of the perched-water zone. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

An overview of the evolving jurisdictional scope of the U.S. Clean Water Act for hydrologists

Abstract The Clean Water Act (CWA) is the primary federal mechanism by which the physical, chemical, and biological integrity of streams, lakes, and wetlands are protected in the United States. The CWA has evolved considerably since its initial passage in 1948, including explicit expansions and contractions of jurisdictional scope through a series of legislative actions, court decisions, and agency rules. Here, we provide a practical summary of the CWA's evolution, detailing the major updates or revisions and their circumstances. Additionally, we identify the jurisdictional scope of the law for rivers and streams, lakes, and wetlands based on the language used and implementation by the agencies during the same time period. While the rulemaking process commonly uses language that will be abstract to many hydrologists, understanding the on‐the‐ground implications, quantifying regulatory (un)certainties, and assessing the magnitude of changes through time is important to understanding the implications of environmental regulation development, litigation, and enforcement. Thus, we translate the enforcement norms and definitions into quantitative estimates for Clean Water Act scope in the Wabash River Basin (Illinois, Indiana, and Ohio, USA) as a demonstration of the spatial consequences of changing regulatory language. This article is categorized under: Engineering Water > Planning Water Human Water > Water Governance Water and Life > Conservation, Management, and Awareness

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Resilience Analytics for Interdependent Power and Water Distribution Systems

The occurrence of large-scale outages in power distribution systems (PDSs) caused, for instance, by extreme weather events has raised concerns on the cascading impact of the power outages on the resilience of other critical infrastructures, including water distribution systems (WDSs), whose healthy operation highly relies on the availability of power from PDSs. Here, this paper proposes an analytics model for quantifying the interdependence between the resilience of power and water distribution systems. The proposed model first performs spatio-temporal outage analysis on the PDS and WDS to determine the PDS power serving capability and the resulting cascading impact on the WDS water serving capability during the occurrence of disruptions. The resilience interdependence is then determined by a proposed set of six metrics calculated using the power and water serving capability profiles, which trace and quantify the cascading impacts of power outages in the operation of WDSs during the degradation and recovery stages. The proposed analytics model is implemented on the IEEE 33-bus power distribution system supplying power for pumping stations of a 15-node test WDS, considering multiple cases of water storage capacity, single and multiple outage scenarios, and availability of distributed generation. The numerical results demonstrate that the proposed metrics track the temporal and spatial interdependence between the resilience of power and water distribution systems, providing a mechanism to identify weak spots, and assess options to enhance the resilience of the critical water infrastructure.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Coordination and Planning for Water and Power System Resilience (Workshop Report)

Water and power utilities are interdependent, subject to many of the same natural and manmade hazards, and critical for the well-being of communities and society. In April 2021, a virtual workshop was held that brought together representatives from water, wastewater, and electric utilities; government organizations; water and electricity based professional associations; consulting firms; and researcher organizations to explore water and power system interdependencies and resilience. The workshop, organized by Pacific Northwest National Laboratory (PNNL) and funded by the United States Department of Energy (DOE) Water Power Technologies Office (WPTO), explored a vision for coordinated and resilient water and electric utilities of the future and identified barriers and strategies for increased coordination and integrated planning between water and power utilities. Workshop participants suggested next steps and areas where federal research and support would be beneficial. This report documents that key outcomes of the workshop.

13 HYDRO ENERGY↗
DOE OSTI2025

Evaluating the combined effects of light and water availability on the early growth and physiology of Tamarindus indica : Implications for restoration

Abstract Premise The tamarind tree (Tamarindus indica) is a species of significant cultural, economic, and ecological value, with a pantropical distribution. However, the tamarind is experiencing a decline in wild populations in its native range, but the reasons for its decline remain unknown. Methods We examined the critical early life‐history stages for tamarind establishment to understand how varying levels of light and water availability and watering frequency affect its regeneration. Through three greenhouse experiments, we assessed the impact of these resources on the germination, survival, growth, and physiological responses of tamarind seedlings and saplings. Results Water availability was critical for seed germination, but not light levels or pre‐germination treatments. Light was the primary limiting factor for seedling growth. Tamarinds in high light availability grew taller, had more biomass and larger diameter, but the effect of light was modulated by water availability, indicating that there was an interaction between both resources. Water and light affected specific leaf area and leaf dry matter content but not biomass allocation, root‐to‐shoot ratio, or stomatal conductance. Water availability influenced sapling growth, but watering frequency did not, indicating a resilience of tamarind saplings to changes in rainfall periodicity but a sensitivity to total rainfall amounts. Conclusions Our study underscores the importance of considering both light and water availability in tamarind restoration efforts and contribute to understanding plant responses and trade‐offs under different levels of critical resources. Our findings will inform conservation strategies to support the regeneration and long‐term survival ofTamarindus indicain its native habitats.

Plant Sciences↗
DOE OSTI2020

Relating land surface, water table, and weathering fronts with a conceptual valve model for headwater catchments

Knowing little about how porosity and permeability are distributed at depth, we commonly develop models of groundwater by treating the subsurface as a homogeneous black box even though porosity and permeability vary with depth. One reason for this depth variation is that infiltrating meteoric water reacts with minerals to affect porosity in localized zones called reaction fronts. We are beginning to learn to map and model these fronts beneath headwater catchments and show how they are distributed. The subsurface landscapes defined by these fronts lie subparallel to the earth-air interface but with lower relief. They can be situated above, below, or at the water table. These subsurface landscapes of reaction are important because porosity developed from weathering can control subsurface water storage. In addition, porosity often changes at the weathering fronts, and when this affects permeability significantly, the front can act like a valve that re-orients water flowing through the subsurface. We explore controls on the positions of reaction fronts under headwater landscapes by accounting for the timescales of erosion, chemical equilibration, and solute transport. One strong control on the landscape of subsurface reaction is the land surface geometry, which is in turn a function of the erosion rate. In addition, the reaction fronts, like the water table, are strongly affected by the lithology and water infiltration rate. We hypothesize that relationships among the land surface, reaction fronts, and the water table are controlled by feedbacks that can push landscapes toward an “ideal hill”. In this steady state, reaction-front valves partition water volumes into shallow and deep flowpaths. Furthermore, these flows dissolve low- and high-solubility minerals, respectively, allowing their reaction fronts to advance at the erosion rate. This conceptualization could inform better models of subsurface porosity and permeability, replacing the black box.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Fast and Non-Destructive Determination of Water Content in Ionic Liquids at Varying Temperatures by Raman Spectroscopy and Multivariate Regression Analysis

Imidazolium acetate ionic liquids (ILs) have been utilized as promising solvents in many applications that involve varying water content and temperature. These experimental variables affect the anion-cation intermolecular interactions, which in turn influence the performance of the ILs in these applications. Here, this paper shows Raman spectroscopy can be used as an operando method to measure water content in IL solvents when simultaneous temperature changes may occur. The Raman spectra of 1-alkyl-3-methylimidazolium acetate ILs (alkyl chain length n = 2, 4, 6, 8) with varying water content (from 0.028 to 0.899 water mole fraction) and temperature (from 78.1 K to 423.1 K) were measured. Increasing the water content or decreasing the temperature of the tested ILs weakens the anion-cation intermolecular interactions. The water content of these ILs can be quantified even in conditions when the temperature is changing using Raman spectroscopy combined with multivariate regression analysis, including principal component regression (PCR), partial-least-squares regression (PLSR), and artificial neural networks (ANNs). The ANN model combined with partial-least-squares (PLS) achieves the highest prediction accuracy of water content in ILs at varying temperatures (RMSECV = 0.017, R 2 CV = 99.1%, RMSEP = 0.019, R 2 P = 98.8%, RPD = 8.93). Raman spectroscopy provides a potential fast non-destructive operando method to monitor the water content of ILs even in applications when the temperature may be simultaneously altered; this information can lead to the optimized use of these ILs in many applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Long cycle and calendar life of Si-based Li-ion batteries enabled by localized high-concentration electrolytes and their surprising water tolerance

Silicon-based anodes promise an increase in energy density for Li-ion batteries, yet they suffer from a poor calendar life. Researchers have posited that fluorinated lithium salt forms reactive side products that destroy the solid electrolyte interphase (SEI), even without cycling. HF is one such reactive side product formed from trace water contamination in the electrolyte. Some electrolytes, such as localized high concentration electrolytes (LHCEs) may improve cell stability in highly reactive systems, such as Li metal and Si. In the present study, LHCEs containing 200-300 ppm of water retained up to 8% greater capacity (1200-1300 mAh/g Si) in calendar life tests over 200 days compared to dried electrolytes (< 20 ppm water). Calendar aging took place at 100% state of charge. Cells with 200-300 ppm water performed comparably to cells with 20 ppm water in cycle life tests (900-1000 mAh/g Si) . Even adding 1000 ppm water did not lead to rapid capacity fade in cells undergoing cycle life tests. Nano-FTIR spectroscopy revealed chemical and structural differences in the SEI for cells with 1000 ppm water compared to 200-300 ppm water. The SEI differences, including increased Li2O concentration, may have contributed to improved calendar life. This research reveals the capabilities of LHCEs to improve the calendar and cycle life of Si-based Li-ion batteries, despite the presence of a highly reactive contaminant.

25 ENERGY STORAGE↗
DOE OSTI2026

Effect of a transparent water-cooled cathode on the neutron production rate in the glow discharge-type fusion neutron source

In glow discharge-type deuterium–deuterium fusion neutron sources, fusion reactions occurring on the cathode surface contribute significantly to the neutron production rate (NPR); therefore, cathode design plays a crucial role in enhancing NPR. Although the NPR generally increases with discharge current, deuterium desorption caused by cathode heating tends to stagnate it in the high-current regime. Water cooling has been shown to mitigate this stagnation for nontransparent cathodes, but its effectiveness for transparent cathodes has not been experimentally clarified. Here, in this study, a transparent cathode with active water cooling and a spherical geometry was designed and fabricated using stainless steel tubing. Neutron production experiments were conducted with and without water cooling: with water cooling, applied voltages of 20–40 kV were investigated, while without water cooling, the applied voltage was limited to 25 kV. The results showed that the NPR increased continuously with discharge current without stagnation when water cooling was applied. A maximum NPR of (1.8 ± 0.02) × 10 6 n/s was achieved at 40 kV and 50 mA. Compared with our previously reported disk cathode and nontransparent water-cooled cathode of the same diameter, the transparent water-cooled cathode exhibited a significantly enhanced NPR. These findings indicate that combining cathode transparency with active cooling is an effective strategy for improving neutron production in glow discharge-type fusion neutron sources.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Effects of water on the kinetics of acetone hydrogenation over Pt and Ru catalysts

We employed an approach combining reaction kinetics measurements at steady state conditions, electronic structure calculations employing density functional theory, and microkinetic modeling for acetone hydrogenation to provide insights into the effects of water on metal catalyst surfaces for the hydrogenation of oxygenates over a wide range of reaction conditions. Elucidation of the repulsive interactions due to adsorbed water molecules at various reaction conditions provides a basis to formulate rate expressions for heterogeneous catalytic processes of biomass oxygenates. Reaction kinetics experiments were carried out at partial pressures of H 2 , acetone, water and helium in the range of 0.51-0.79, 0.02-0.13, 0.08-0.23, 0-0.28 atm, respectively. We show that the addition of water enhances the hydrogenation rate at 353 K and 1 atm on oxophilic metal catalysts such as Ru/C, whereas the same promotional effect of water is not observed for Pt-based catalysts. Microkinetic model predictions for the hydrogenation of acetone on Ru in the absence and presence of water, using enthalpies and entropies obtained from DFT calculations, were in agreement with the experimentally observed reaction orders and activation barriers. The model shows that a water-assisted hydroxypropyl path is expected to be the favored path on Ru with a rate-determining step of H-OH-mediated hydrogenation of C 3 H 6 OH (i.e., the hydroxypropyl intermediate formed by H 2 O-mediated initial hydrogenation of acetone) to produce isopropyl alcohol (IPA). Furthermore, hydrogen, acetone, hydroxypropyl intermediate and hydroxyl species were predicted to be abundant on the Ru surface with a high coverage of nearly 85%. Lastly, the combined studies of computational and experimental catalysis on hydrogenation reactions help to elucidate the mechanistic role of water on metal catalyzed reactions for producing chemical building blocks from biomass-derived oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The influence of water, diet, and temperature on 87 Sr/ 86 Sr in fin spines of juvenile Atlantic Sturgeon Acipenser oxyrinchus oxyrinchus

Analysis of microchemistry in fish fin spines offers a non-lethal approach to address key questions relating to spatial patterns and habitat use of fish. Reconstruction of life history is based on chemical changes within calcified structures with an underlying assumption of elemental incorporation relative to environmental concentration. However, information is limited on the relative influence of water and diet concentrations of elements to corresponding concentrations within fin spines. Strontium (Sr) is commonly used in trace element studies because of its predictable changes within watersheds, with recent applications showing utility of 87 Sr/ 86 Sr for greater spatial resolution. Therefore, this study evaluated the influence of water and diet 87 Sr/ 86 Sr on pectoral fin spines of Atlantic Sturgeon A. oxyrinchus oxyrinchus in controlled laboratory experiments. In the first experiment, fish were exposed to a control, water spiked with 0.10 mg/L of 87 Sr or diet spiked with 0.25 µg/g or 0.50 µg/g of 87 Sr in replicated tanks for 12 weeks. In a second experiment, to determine the time duration required to occupy a different environment for fin spine chemistry to change, fish were maintained in water- or diet-spiked treatments for 1, 2, 3, or 6 weeks. Additionally, to determine if temperature has an influence on 87 Sr/ 86 Sr in fin spines, fish were held at 15 and 25°C for 12 weeks. Fin spines were analyzed using laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS), and water and diet samples were analyzed using solution based ICP-MS. Results from Experiment 1 indicate water is the primary contributor and diet a secondary contributor of 87 Sr/ 86 Sr in pectoral fin spines of Atlantic Sturgeon. Results from Experiment 2 indicate fin spine 87 Sr/ 86 Sr can be influenced by water after 1 week and diet after 12 weeks. Additionally, although sample size was limited (n=3), water temperature did not have an effect on 87 Sr/ 86 Sr fin spine chemistry. In conclusion, these results provide guidance for interpretation of 87 Sr/ 86 Sr in pectoral fin spines of sturgeon and indicate usefulness of the technique for retrospectively estimating movement and habitat use.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Potential of water quality wetlands to mitigate habitat losses from agricultural drainage modernization

Given widespread biodiversity declines, a growing global human population, and demands to improve water quality, there is an immediate need to explore land management solutions that support multiple ecosystem services. Agricultural water quality wetlands designed to provide both water quality benefits and wetland and grassland habitat are an emerging restoration solution that may reverse habitat declines in intensive agricultural areas. Installation of water quality wetlands in the Upper Midwest, USA, when considered alongside the repair and modification of aging agricultural tile drainage infrastructure, is a likely scenario that may mitigate nutrient pollution exported from agricultural systems and improve crop yields. The capacity of water quality wetlands to provide habitat within the wetland pool and the surrounding grassland is not well-studied, particularly with respect to potential habitat changes resulting from drainage infrastructure upgrades. For the current study, we produced spatially explicit models of 37 catchments distributed throughout an important region for agriculture and biodiversity, the Des Moines Lobe of Iowa. Four scenarios were considered - with and without improved drainage and with and without water quality wetlands - to estimate the net potential habitat implications of these scenarios for amphibians, grassland birds, and wild bees. Model results indicate that drainage modification alone will likely result in moderate direct losses of suitable amphibian habitat and large declines in overall habitat quality. However, inclusion of water quality wetlands at the catchment scale may mitigate these amphibian habitat losses while also increasing grassland bird and pollinator habitat. In conclusion, the impacts of water quality wetlands and drainage modernization on waterfowl in the region require additional study.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Self-Assembly of Silica Nanoparticles at Water–Hydrocarbon Interfaces: Insights from In Operando Small-Angle X-ray Scattering Measurements and Molecular Dynamics Simulations

To achieve tunable controls on the interactions of siliceous materials in subsurface environments bearing water and hydrocarbons, it is essential to determine the influence of hydrocarbon–water interfaces on the self-assembly of the silica particles. The hydrophilic silica particle have a tendency to aggregate on the water front of the interface. Self-assembly of silica nanoparticles proceeds via the migration of these nanoparticles to the water–hydrocarbon interface followed by aggregation at the interface. Fractal-like morphologies of assembled silica nanoparticles at water–hydrocarbon interfaces are observed. Rapid assembly of the hydrophilic silica nanoparticles at water–hydrocarbon interfaces corresponds to an overall reduction in the surface tension of water–toluene and water–heptane systems. These studies demonstrate the silica aggregation that is the precursor of silica polymerization, or nucleation and growth is influenced by the presence of hydrocarbons in subsurface geologic environments. These insights were derived from in operando ultrasmall and small-angle X-ray scattering (USAXS/SAXS) measurements, cryo-scanning electron microscopy (Cryo-SEM) imaging, and classical molecular dynamics simulations. As a result, these studies are intended to inform current and future efforts aimed at tuning silica reactivity in subsurface geologic environments to enhance permeability, the design and use of silica-based proppants to enhance fractures, and the development of effective strategies to control silica-based scaling behavior in subsurface reservoirs.

42 ENGINEERING↗
DOE OSTI2020

3D-Printed Membranes with a Zwitterionic Hydrogel Coating for More Robust Oil–Water Separation

Three-dimensional (3D)-printed membranes via stereolithography (SLA) are promising in oil–water separation, which is the key in the purification of industrial oily wastewater. To achieve gravity-driven oil–water separation, the membrane material needs to be simultaneously hydrophilic/oleophobic. However, most of the state-of-the-art materials for SLA do not meet the requirement. While water-adsorbing hydrogel is simultaneously hydrophilic/oleophobic and there have been reports on 3D printing of hydrogels in biomedical applications, the hydrogel is too soft for membrane application. Here, we report a simple approach to tackle the issue: a hydrogel coating on SLA-based plastic membranes. The coating is fabricated, using [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide as the zwitterionic monomer and acrylamide as the comonomer, via in situ polymerization on SLA-based plastic membranes. The contact angle tests and Fourier transform infrared spectrum show that such a membrane readily adsorbs water and becomes simultaneously hydrophilic/oleophobic. The oil–water separation tests indicate that the water-adsorbed membrane is highly efficient in gravity-driven oil–water separation in 31 repeating cycles. Our results indicate the great potential of 3D-printed membranes in oil–water separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polarizable Water Potential Derived from a Model Electron Density

A new empirical potential for efficient, large scale molecular dynamics simulation of water is presented. The HIPPO (Hydrogen-like Intermolecular Polarizable POtential) force field is based upon the model electron density of a hydrogen-like atom. This framework is used to derive and parametrize individual terms describing charge penetration damped permanent electrostatics, damped polarization, charge transfer, anisotropic Pauli repulsion, and damped dispersion interactions. Initial parameter values were fit to Symmetry Adapted Perturbation Theory (SAPT) energy components for ten water dimer configurations, as well as the radial and angular dependence of the canonical dimer. The SAPT-based parameters were then systematically refined to extend the treatment to water bulk phases. The final HIPPO water model provides a balanced representation of a wide variety of properties of gas phase clusters, liquid water, and ice polymorphs, across a range of temperatures and pressures. This water potential yields a rationalization of water structure, dynamics, and thermodynamics explicitly correlated with an ab initio energy decomposition, while providing a level of accuracy comparable or superior to previous polarizable atomic multipole force fields. The HIPPO water model serves as a cornerstone around which similarly detailed physics-based models can be developed for additional molecular species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Molecular Dynamics Investigation of Nanoscale Hydrophobicity of Polymer Surfaces: What Makes Water Wet?

The wettability of a polymer surface–related to its hydrophobicity or tendency to repel water–can be crucial for determining its utility, such as for a coating or a purification membrane. While wettability is commonly associated with the macroscopic measurement of a contact angle between surface, water, and air, the molecular physics that underlie these macroscopic observations are not fully known, and anticipating relative behavior of different polymers is challenging. To address this gap in molecular-level understanding, we use molecular dynamics simulations to investigate and contrast interactions of water with six chemically distinct polymers: polytetrafluoroethylene, polyethylene, polyvinyl chloride, poly(methyl methacrylate), Nylon 66, and polyvinyl alcohol. We show that several prospective quantitative metrics for hydrophobicity agree well with experimental contact angles. Moreover, the behavior of water in proximity to these polymer surfaces can be distinguished with analysis of interfacial water dynamics, extent of hydrogen bonding, and molecular orientation–even when macroscopic measures of hydrophobicity are similar. The predominant factor dictating wettability is found to be the extent of hydrogen bonding between polymer and water, but the precise manifestation of hydrogen bonding and its impact on surface-water structure varies. In the absence of hydrogen bonding, other molecular interactions and polymer mechanics control hydrophobic ordering. Furthermore, these results provide new insights into how polymer chemistry specifically impacts water-polymer interactions and translates to surface hydrophobicity. Such factors may facilitate the design or processing of polymer surfaces to achieve targeted wetting behavior, and presented analyses can be useful in studying the interfacial physics of other systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗