Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

G-cueing microcontroller (a microprocessor application in simulators)

A g cueing microcontroller is described which consists of a tandem pair of microprocessors, dedicated to the task of simulating pilot sensed cues caused by gravity effects. This task includes execution of a g cueing model which drives actuators that alter the configuration of the pilot's seat. The g cueing microcontroller receives acceleration commands from the aerodynamics model in the main computer and creates the stimuli that produce physical acceleration effects of the aircraft seat on the pilots anatomy. One of the two microprocessors is a fixed instruction processor that performs all control and interface functions. The other, a specially designed bipolar bit slice microprocessor, is a microprogrammable processor dedicated to all arithmetic operations. The two processors communicate with each other by a shared memory. The g cueing microcontroller contains its own dedicated I/O conversion modules for interface with the seat actuators and controls, and a DMA controller for interfacing with the simulation computer. Any application which can be microcoded within the available memory, the available real time and the available I/O channels, could be implemented in the same controller.

Horattas, C. G.↗

Crop calendars for the US, USSR, and Canada in support of the early warning project

New crop calendars are produced for U.S. regions where several years of periodic growth stage observations are available on a CRD basis. Preexisting crop calendars from the LACIE are also collected as are U.S. crop calendars currently being created for the Foreign Commodities Production Forecast project. For the U.S.S.R. and Canada, no new crop calendars are created because no new data are available. Instead, LACIE crop calendars are compared against simulated normal daily temperatures and against the Robertson wheat and Williams barley phenology models run on the simulated normal temperatures. Severe inconsistencies are noted and discussed. For the U.S.S.R., spring and fall planting dates can probably be estimated accurately from satellite or meteorological data. For the starter model problem, the Feyerherm spring wheat model is recommended for spring planted small grains, and the results of an analysis are presented. For fall planted small grains, use of normal planting dates supplemented by spectral observation of an early stage is recommended. The importance of nonmeteorological factors as they pertain to meteorological factors in determining fall planting is discussed. Crop calendar data available at the Johnson Space Center for the U.S., U.S.S.R., Canada, and other countries are inventoried.

Hodges, T.↗

Effects of management practices on reflectance of spring wheat canopies

The effects of available soil moisture, planting date, nitrogen fertilization, and cultivar on reflectance of spring wheat (Triticum aestivum L.) canopies were investigated. Spectral measurements were acquired on eight dates throughout the growing season, along with measurements of crop maturity stage, leaf area index, biomass, plant height, percent soil cover, and soil moisture. Planting date and available soil moisture were the primary agronomic factors which affected reflectance of spring wheat canopies from tillering to maturity. Comparisons of treatments indicated that during the seedling and tillering stages planting date was associated with 36 percent and 85 percent of variation in red and near infrared reflectances, respectively. As the wheat headed and matured, less of the variation in reflectance was associated with planting date and more with available soil moisture. By mid July, soil moisture accounted for 73 percent and 69 percent of the variation in reflectance in red and near infrared bands, respectively. Differences in spectral reflectance among treatments were attributed to changes in leaf area index, biomass, and percent soil cover. Cultivar and N fertilization rate were associated with very little of the variation in the reflectance of these canopies.

Daughtry, C. S. T.↗

Remote estimation of the surface characteristics and energy balance over an urban-rural area and the effects of surface heat flux on plume spread and concentration

A one dimensional boundary layer model was used in conjunction with satellite derived infrared surface temperatures to deduce values of moisture availability, thermal inertia, heat and evaporative fluxes. The Penn State satellite image display system, a sophisticated image display facility, was used to remotely sense these various parameters for three cases: St. Louis, Missouri; the Land Between the Lakes, Kentucky; and Clarksville, Tennessee. The urban centers displayed the maximum daytime surface temperatures which correspond to the minimum values of moisture availability. The urban center of St. Louis and the bodies of water displayed the maximum nighttime surface temperatures which correspond to the maximum thermal inertia values. It is shown that moisture availability and thermal inertia are very much responsible for the formation of important temperature variations over the urban rural complex.

Dicristofaro, D. C.↗

Information display and interaction in real-time environments

The available information bandwidth as a funcion of system's complexity and time constraints in a real time control environment were examined. Modern interactive graphics techniques provide very high bandwidth data displays. In real time control environments, effective information interaction rates are a function not only of machine data technologies but of human information processing capabilities and the four dimensional resolution of available interaction techniques. The available information bandwidth as a function of system's complexity and time constraints in a real time control environment were examined.

Bocast, A. K.↗

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.↗

Modular photovoltaic stand-alone systems: Phase 1

A family of modular stand-alone power systems that covered the range in power level from 1 kw to 14 kw was developed. Products within this family were required to be easily adaptable to different environments and applications, and were to be both reliable and cost effective. Additionally, true commonality in hardware was to be exploited, and unnecessary recurrence of design and development costs were to be minimized; thus improving hardware availability. Assurance of compatibility with large production runs, was also an underlying program goal. A secondary objective was to compile, evaluate, and determine the economic and technical status of available, and potentially available, technology options associated with the balance of systems (BOS) for stand-along photovoltaic (PV) power systems. The secondary objective not only directly supported the primary but additionally contributed to the definition and implementation of the BOS cost reduction plan.

Naff, G. J.↗

ADS-1 - A new general-purpose optimization program

Today, numerous programs are available which may be coupled with finite element analysis or other analysis techniques to perform the optimization function in the solution of structural synthesis problems. However, most of these codes include only one or two algorithms and many have not been tested on problems of significant size and complexity. There is, therefore, a need for a reliable, general-purpose, publicly available code, containing a variety of modern algorithms for use in structural synthesis as well as general engineering design. The ADS-1 program (Automated Design Synthesis: Version 1) was written in response to this need. The present investigation has the objective to present the capabilities of the ADS program and to demonstrate its application to structural synthesis. The ADS program solves the general nonlinear constrained optimization problem in the standard form. At each level of the optimization process, several options are available.

Vanderplaats, G. N.↗

Progress toward the analysis of complex propulsion installation flow phenomenon

A trend toward replacement of parametric model testing with parametric analysis for the design of aircraft is driven by the rapidly escalating cost of wind tunnel testing, the increasing availability of large fast computers, and powerful numerical flow algorithms. In connection with the complex flow phenomena characteristic of propulsion installations, it is now necessary to employ both parametric analysis and testing for design procedures. Powerful flow analysis techniques are available to predict local flow phenomena. However, the employment of these techniques is very expensive. It is, therefore, necessary to link these analyses with less powerful and less expensive procedures for an accurate analysis of propulsion installation flowfields. However, the interfacing and coupling processes needed are not available. The present investigation is concerned with progress made regarding the development of suitable linking methods. Attention is given to methods of analysis for predicting the flow around a nacelle coupled to a highly swept wing.

Kern, P. R. A.↗

Solar maximum repair mission

The Solar Maximum Repair Mission is scheduled for launch in April, 1984. The mission was made possible through a spacecraft designed for on-orbit repair, the availability of spacecraft repair hardware and the availability of the Shuttle System. Repair is expected to result in the availability of significant new science data and a demonstration of the capability for on-orbit repair of spacecraft. Considerations of the capability to maintain and repair spacecraft on-orbit for the future are also discussed.

Space transportation system↗

Visual slant misperception and the Black-Hole landing situation

A theory which explains the tendency for dangerously low approaches during night landing situations is presented. The two dimensional information at the pilot's eye contains sufficient information for the visual system to extract the angle of slant of the runway relative to the approach path. The analysis is depends upon perspective information which is available at a certain distance out from the aimpoint, to either side of the runway edgelights. Under black hole landing conditions, however, this information is not available, and it is proposed that the visual system use instead the only available information, the perspective gradient of the runway edgelights. An equation is developed which predicts the perceived approach angle when this incorrect parameter is used. The predictions are in close agreement with existing experimental data.

Perrone, J. A.↗

Digital interface for bi-directional communication between a computer and a peripheral device

For transmission of data from the computer to the peripheral, the computer initially clears a flipflop which provides a select signal to a multiplexer. A data available signal or data strobe signal is produced while tht data is being provided to the interface. Setting of the flipflop causes a gate to provide to the peripherial a signal indicating that the interface has data available for transmission. The peripheral provides an acknowledge or strobe signal to transfer the data to the peripheral. For transmission of data from the peripheral to the computer, the computer presents the initially cleared flipflop. A data request signal from the peripheral indicates that the peripheral has data available for transmission to the computer. An acknowledge signal indicates that the interface is ready to receive data from the peripheral and to strobe that data into the interface.

Bond, H. H., Jr.↗

A Study of DSN Traveling Wave Maser System Reliability

Reliability and availability characteristics of the DSN traveling wave maser (TWM) Assemblies are reported for the years 1981 through 1983, the charcteristics determined are: mean time between failures (MTBF) - 1200 hours; mean time to restore service (MTTRS) - 2.5 hours; and availability - 99.83%. The TWM MTBF is very good as compared to other DSN subsystems and assemblies. The TWM MTTRS is currently about three times as long as the average of other DSN subsystems. The dominant cause of TWM failures is contamination of the helium gas in the closed cycle refrigerators. Station configurations that do not provide TWM redundancy are subject to reception outages for long periods of time. Recommendations are made to improve the TWM Assembly availability characteristics for future mission support operations.

Stevens, R.↗

ADS: A FORTRAN program for automated design synthesis, version 1.00

A new general-purpose optimization program for engineering design is described. ADS-1 (Automated Design Synthesis - Version 1) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels, being strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired. The program is demonstrated with a simple structural design example.

Vanderplaats, G. N.↗

Visual slant misperception and the 'black-hole' landing situation

A theory which explains the tendency for dangerously low approaches during night landing situations is presented. The two-dimensional information at the pilot's eye contains sufficient information for the visual system to extract the angle of slant of the runway relative to the approach path. The analysis depends upon perspective information which is available at a certain distance out from the aimpoint, to either side of the runway edgelights. Under black hole landing conditions, however, this information is not available, and it is proposed that the visual system use instead the only available information, the perspective gradient of the runway edgelights. An equation is developed which predicts the perceived approach angle when this incorrect parameter is used. The predictions are in close agreement with existing experimental data.

Perrone, J. A.↗

Particle track measurements in lunar regolith breccias

Particle track measurements have been reported for 25 (5 percent) of the regolith breccias in the collection; they have been reported for 16 breccias (30 percent) in the reference suite. The most frequently reported measurement for these 25 breccias is the maximum surface exposure age of the compacted rock (48 percent of the published breccia measurements). Information on the nature of the precompaction regolith is given for 9 rocks (36 percent) and on the nature of the compaction event for 6 rocks (24 percent). Most of the breccias appear to have simple post-compaction surface exposure histories (89 percent). From the few track density frequency distributions (7) that are available and inferring from the low exposure ages of these rocks (75 percent were younger than 10 to the 6th years), it appears that most of these breccias are amenable to studies which separate the contemporary surface exposure age from information about the precompaction regolith. If the number of immature-submature precompaction soils (6 out of 10 of the breccias for which appropriate data are available) represents many regolith breccias, then we can infer that regolith breccias may sample the deeper, less reworked materials in the lunar soil and compliment the samples available from the returned cores.

Blanford, G. E.↗

ADS: A FORTRAN program for automated design synthesis: Version 1.10

A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis - Version 1.10) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels: strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples, and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired.

Vanderplaats, G. N.↗

Particle track measurements in lunar regolith breccias

Particle track measurements have been reported for 25 (5 percent) of the regolith breccias in the collection; they have been reported for 16 breccias (30%) in the reference suite. The most frequently reported measurement for these 25 breccias is the maximum surface exposure age of the compacted rock (48% of the published breccia measurements). Information on the nature of the precompaction regolith is given for 9 rocks (36%) and on the nature of the compaction event for 6 rocks (24%). Most of the breccias appear to have simple post compaction surface exposure histories (89%). From the few track density frequency distributions (7) that are available and inferring from the low exposure ages of these rocks (75% were younger than 10 to the 6th years), it appears that most of these breccias are amenable to studies which separate the contemporary surface exposure age from information about the precompaction regolith. If the number of immature submature precompaction soils (6 out of 10 of the breccias for which appropriate data are available) represents many regolith breccias, then it is inferred that regolith breccias may sample the deeper, less reworked materials in the lunar soil and compliment the samples available from the returned cores.

Blanford, G. E.↗