SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Manuscript for submission to GRL. Must also pass HQ Interagency Review before submission to journal.
Abstract Climate change is a prevalent threat, and it is unlikely that current mitigation efforts will be enough to avoid unwanted impacts. One potential option to reduce climate change impacts is the use of stratospheric aerosol injection (SAI). Even if SAI is ultimately deployed, it might be initiated only after some temperature target is exceeded. The consequences of such a delay are assessed herein. This study compares two cases, with the same target global mean temperature of ∼1.5° C above preindustrial, but start dates of 2035 or a ‘delayed’ start in 2045. We make use of simulations in the Community Earth System Model version 2 with the Whole Atmosphere Coupled Chemistry Model version 6 (CESM2-WACCM6), using SAI under the SSP2-4.5 emissions pathway. We find that delaying the start of deployment (relative to the target temperature) necessitates lower net radiative forcing (−30%) and thus larger sulfur dioxide injection rates (+20%), even after surface temperatures converge, to compensate for the extra energy absorbed by the Earth system. Southern hemisphere ozone is higher from 2035 to 2050 in the delayed start scenario, but converges to the same value later in the century. However, many of the surface climate differences between the 2035 and 2045 start simulations appear to be small during the 10–25 years following the delayed SAI start, although longer simulations would be needed to assess any longer-term impacts in this model. In addition, irreversibilities and tipping points that might be triggered during the period of increased warming may not be adequately represented in the model but could change this conclusion in the real world.
A prototypical hydroperoxyalkyl radical (•QOOH) intermediate, transiently formed in the oxidation of volatile organic compounds, was directly observed through its infrared fingerprint and energy-dependent unimolecular decay to hydroxyl radical and cyclic ether products. Direct time-domain measurements of •QOOH unimolecular dissociation rates over a wide range of energies were found to be in accord with those predicted theoretically using state-of-the-art electronic structure characterizations of the transition state barrier region. Unimolecular decay was enhanced by substantial heavy-atom tunneling involving O-O elongation and C-C-O angle contraction along the reaction pathway. Master equation modeling yielded a fully a priori prediction of the pressure-dependent thermal unimolecular dissociation rates for the •QOOH intermediate—again increased by heavy-atom tunneling—which are required for global models of atmospheric and combustion chemistry.
This is a standalone Fortran code (mie_scat) that calculates the mie scattering cross sections, absorption cross sections, and efficiency coefficients of dust grains. It includes a separate file (miegrn) that functions as a wrapper function between PHOENIX (a proprietary radiative transfer code to model stellar atmospheres) and the mie scattering calculations. Miegrn works to determine the input parameters for mie_scat and then feeds the resultant data back into PHOENIX.
SAND2021-15059 O Haero is a software library for representing aerosol size distributions, chemical species, and parameterized processes to use with a coupled atmospheric dynamics model or as a standalone tool. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.
Abstract Daily expected wind power production from operating wind farms across North America are used to evaluate capacity factors (CF) computed using simulation output from the Weather Research and Forecasting (WRF) Model and to condition statistical models linking atmospheric conditions to electricity production. In Parts I and II of this work, we focus on making projections of annual energy production and the occurrence of electrical production drought. Here, we extend evaluation of the CF projections for sites in the Northeast, Midwest, southern Great Plains (SGP), and southwest U.S. coast (SWC) using statewide wind-generated electricity supply to the grid. We then quantify changes in the time scales of CF variability and the seasonality. Currently, wind-generated electricity is lowest in summer in each region except SWC, which causes a substantial mismatch with electricity demand. While electricity of residential heating may shift demand, research presented here suggests that summertime CF are likely to decline, potentially exacerbating the offset between seasonal peak power production and current load. The reduction in summertime CF is manifest for all regions except the SGP and appears to be linked to a reduction in synoptic-scale variability. Using fulfillment of 50% and 90% of annual energy production to quantify interannual variability, it is shown that wind power production exhibits higher (earlier fulfillment) or lower (later fulfillment) production for periods of over 10–30 years as a result of the action of internal climate modes. Significance Statement Electrical power system reassessment and redesign may be needed to aid efficient increased use of variable renewables in the generation of electricity. Currently wind-generated electricity in many regions of North America exhibits a minimum in summertime and hence is not well synchronized with electricity demand, which tends to be maximized in summer. Future projections indicate evidence of reductions in wind power during summer that would amplify this offset. However, electrification of heating may lead to increased wintertime demand, which would lead to greater synchronization.
Representing the forest canopy in atmospheric numerical models should improve simulated winds within and above the canopy up to a few hundred meters above the ground. Here, in this study, we implement a forest canopy parameterization into the Weather Research and Forecasting (WRF) Model in a large-eddy simulation (LES) mode by applying drag forces across multiple layers within the canopy height. We use unique observations from the Lidar Experiments for Assessing Flow over Forests (LEAFF) field campaign at the Wind River Experimental Forest (WREF) in the U.S. Pacific Northwest to evaluate model performance. In a 2-day case study, the canopy parameterization improved wind predictions both within and above the canopy, particularly during the daytime and at finer grid resolution. Without it, winds were frequently overpredicted above the canopy. Similarly, derived quantities such as the wind shear index also yielded estimates closer to observations with the canopy parameterization implemented. These findings suggest that representing the canopy using drag forces alone can improve simulated mean winds up to 200 m above the surface. Furthermore, second-order statistical moments of wind were more sensitive to canopy density than first-order moments, especially during the daytime. This increased sensitivity and the improved daytime performance in wind speed—evidenced by the lowest bias from observations (3% compared to 20% over diurnal cycle)—imply that winds above the canopy layer are strongly influenced by how well turbulence above the canopy is modeled. The results of this study can serve as a foundation for parameterizing forest canopy effects in coarser weather forecast models.
The sea surface temperature (SST) contrast between the Northern Hemisphere (NH) and Southern Hemisphere (SH) influences the location of the intertropical convergence zone (ITCZ) and the intensity of the monsoon systems. This study examines the contributions of external forcing and unforced internal variability to the interhemispheric SST contrast in HadSST3 and ERSSTv5 observations, and 10 models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) from 1881 to 2012. Using multimodel mean fingerprints, a significant influence of anthropogenic, but not natural, forcing is detected in the interhemispheric SST contrast, with the observed response larger than that of the model mean in ERSSTv5. The forced response consists of asymmetric NH–SH SST cooling from the mid-twentieth century to around 1980, followed by opposite NH–SH SST warming. The remaining best-estimate residual or unforced component is marked by NH–SH SST maxima in the 1930s and mid-1960s, and a rapid NH–SH SST decrease around 1970. Examination of decadal shifts in the observed interhemispheric SST contrast highlights the shift around 1970 as the most prominent from 1881 to 2012. Both NH and SH SST variability contributed to the shift, which appears not to be attributable to external forcings. Most models examined fail to capture such large-magnitude shifts in their control simulations, although some models with high interhemispheric SST variability are able to produce them. Large-magnitude shifts produced by the control simulations feature disparate spatial SST patterns, some of which are consistent with changes typically associated with the Atlantic meridional overturning circulation (AMOC).
The influence of each phase of the Indian Ocean Dipole (IOD) on the largescale circulation in South America is investigated using rainfall observations, fully-coupled, large-ensemble, historical simulations (LENS), and forced experiments using the coupled model’s atmospheric component. IOD events often occur when El Niño Southern Oscillation (ENSO), the largest source of interannual variability of precipitation in South America, is active. To distinguish from effects of ENSO, only cases during neutral ENSO conditions are analyzed in LENS and observations. During the positive IOD polarity, a perturbation in the localWalker circulation leads to increased convection over equatorial South America, resulting in wet anomalies in the Amazon basin. This signal is the opposite of what is expected during El Niño events. Tropical convection anomalies in the Indian Ocean also force an extratropical Rossby wave train that reaches subtropical South America. During positive IOD, the moisture flux from the Amazon to central and southeastern Brazil weakens, resulting in a drying of the area associated with the South Atlantic Convergence Zone. Meanwhile, the South Atlantic Subtropical High strengthens, contributing to a drying in southeastern Brazil. During negative IOD, the induced wave train from the Indian Ocean leads to increased moisture transport to the La Plata basin, leading to wet anomalies in the region.
The Nile River basin is one of the global hotspots vulnerable to climate change impacts because of a fast-growing population and geopolitical tensions. Previous studies demonstrated that general circulation models (GCMs) frequently show disagreement in the sign of change in annual precipitation projections. Here, we first evaluate the performance of 20 GCMs from phase six of the Coupled Model Intercomparison Project (CMIP6) benchmarked against a high-spatial-resolution precipitation dataset dating back to 1983 from Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks–Climate Data Record (PERSIANN-CDR). Next, a Bayesian model averaging (BMA) approach is adopted to derive probability distributions of precipitation projections in the Nile basin. Retrospective analysis reveals that most GCMs exhibit considerable (up to 64% of mean annual precipitation) and spatially heterogenous bias in simulating annual precipitation. Moreover, it is shown that all GCMs underestimate interannual variability; thus, the ensemble range is underdispersive and is a poor indicator of uncertainty. The projected changes from the BMA model show that the value and sign of change vary considerably across the Nile basin. Specifically, it is found that projected changes in the two headwaters basins, namely, the Blue Nile and Upper White Nile, are 0.03% and -1.65%, respectively; both are statistically insignificant at α = 0.05. The uncertainty range estimated from the BMA model shows that the probability of a precipitation decrease is much higher in the Upper White Nile basin whereas projected change in the Blue Nile is highly uncertain both in magnitude and sign of change.
Synthetic turbulence models (STMs) are used in wind engineering to generate realistic flow fields and are employed as inputs to industrial wind simulations. Examples include prescribing inlet conditions in large eddy simulations that model loads on wind turbines and tall buildings. We are interested in STMs capable of generating fluctuations based on prescribed second-moment statistics since such models can simulate environmental conditions that closely resemble on-site observations. To this end, the widely used Mann model (see Mann, 1994, 1998) is the inspiration for DRDMannTurb. The Mann model is described by three physical parameters: a magnitude parameter influencing the global variance of the wind field and corresponding to the Kolmogorov constant multiplied by the rate of viscous dissipation of the turbulent kinetic energy to the two-thirds, αϵ 2/3 , a turbulence length scale parameter L, and a nondimensional parameter Γ related to the lifetime of the eddies. A number of studies, as well as international standards (e.g., those by the International Electrotechnical Commission (IEC)), include recommended values for these three parameters with the goal of standardizing wind simulations according to observed energy spectra. Yet, having only three parameters, the Mann model faces limitations in accurately representing the diversity of observable spectra. This Python package enables users to extend the Mann model and more accurately fit field measurements through flexible neural network models of the eddy lifetime function. Following Keith et al. (2021), we refer to this class of models as Deep Rapid Distortion (DRD) models. DRDMannTurb also includes a general module implementing an efficient method for synthetic turbulence generation based on a domain decomposition technique. This technique is also described in Keith et al. (2021).
This report provides a demonstration of MELCOR and MELCOR Accident Consequence Code System (MACCS) capabilities to perform a dose assessment for a Molten Salt Reactor (MSR) off-gas system. A primary containment system salt spill is used as the off-normal scenario, along with a normal operation dose assessment for comparison. This report discusses the tools, methods, and information used in this assessment so that it may be utilized as a starting point for future advanced reactor consequence analyses. This report also highlights several gaps, to include the need for reactor inventory information specific to advanced reactors, and the need for specific atmospheric transport models that take into account the unique deposition behaviors of tritium and carbon-14, and makes recommendations for closing these gaps. This report satisfies the DOE NE Milestone M4RD-21SN0601062.
As our society is increasingly dependent on technologies in space, predicting space weather becomes ever more important. We have come to rely on technologies such as cellphones, GPS, the Internet, and other commercial and military assets. In order to protect these systems a high priority is to develop better understanding of the harmful conditions of space weather encountered in the near-Earth radiation environment which are mostly dictated by the dynamics of energetic charged particles. The main objective of our proposal was to improve the specification and forecast of the particle distribution in the Earth’s inner magnetosphere using data assimilation together with machine learning (ML) algorithms in our ring current-atmosphere interactions model with self-consistent magnetic and electric fields (RAM-SCBE). Specifically, we explored the application of machine learning algorithms to emulate and improve, through infusion of observational data, the magnetic field (SCBE) of our ring current model. Our work advanced towards the characterization of the RAM-SCBE particle flux field and its potentially different simulation scenarios. We explored how the model behaves in a number of simulation scenarios in order to better understand how the model reacts to perturbations in the solar wind. We were able to capture this behavior through the simulation of an ensemble of RAM-SCB model solutions. The ensemble showed the important correlations between the particle fluxes and the magnetic field. We were able to start the training of a neural network (Autoencoder) to identify the dominant features of the magnetic field, and the main correlations (linear and non-linear) between the particle fluxes and the magnetic field. Our next steps consists of training a neural network to capture the time evolution of the dominant features and obtain a consistent surrogate model for the RAM-SCB.
The main purpose of this project was to provide ground-truth and satellite-based soil water content data in the Houston, Texas, area to support the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s 2022 field campaign, the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This involved installing four soil monitoring stations at different locations in the Houston area, two of which were part of the ARM facility and two were ancillary. The two stations associated directly with ARM were installed alongside other facilities managed and maintained by the TRACER research team during the intensive operational period (IOP), one located at the La Porte, Texas airport and the other near Guy, Texas. Data from these stations were assimilated with similar data collected by the Harris County Flood Control District (HCFCD) to improve the spatial coverage of the real-time monitoring network. The ground-truth data were compared to the satellite-based (National Aeronautics and Space Administration [NASA]’s Soil Moisture Active Passive [SMAP] mission) data in the TRACER area of interest, and analyzed further to nowcast gridded data over the Houston area. The nowcasted, gridded data product was made available to TRACER researchers for use in climate and land-atmosphere interaction modeling that can help understand formation and persistence of convective storms in dense urban areas, and predict possible environmental events such as floods.
Explore the source record for details and available documents.
We report experimental measurements of dimethyl sulfide oxidation, focusing on a major chemical intermediate, hydroperoxymethyl thioformate (HPMTF). The (photo)chemistry and transport properties of HPMTF, which are critical to accurate modeling of tropospheric sulfur, are not known, partly because current analytical methods are not optimized for elusive chemical intermediates. We investigated dimethyl sulfide oxidation using a custom time-resolved photoionization mass spectrometer, interfaced with pulsed laser photolysis, continuous photolysis, and liquid droplet reactors. We detected and characterized HPMTF (along with other reaction intermediates), quantified its yield, and measured its formation rate coefficient. We also developed a clean, intense, online HPMTF source, suitable for further experimental investigations. Lastly, we measured the mass accommodation coefficient of HPMTF on water droplets – a critical quantity for modeling its atmospheric partitioning between the gas and condensed phases. The experimental platform we developed here enables the exploration of other critical elusive reaction intermediates.
Understanding particulate emissions from nuclear facilities could help differentiate between normal nuclear operations and potential nuclear accidents or nuclear weapons tests. Oak Ridge National Laboratory (ORNL) is unique in that there are several types of nuclear facilities on site: an operating production reactor, radiochemical separation facilities, and a spallation neutron source. This project deployed a high-volume particulate air filter sampler to collect airborne particulate effluent from the nuclear facilities on site at ORNL. Collections occurred regularly from November 1, 2024, through June 30, 2025, and were analyzed via gamma spectroscopy in the laboratory. The radioisotope iodine-123 ( 123 I) was detected in several samples throughout the collection period. Detailed atmospheric transport modeling was performed on all detections for source attribution, and the most likely source of the 123 I was determined to be the Spallation Neutron Source. The project demonstrated the viability of ORNL as a test bed for effluent monitoring studies.
The main purpose of this project was to provide ground-truth and satellite-based soil water content data in the Houston, Texas, area to support the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s 2022 field campaign, the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This involved installing four soil monitoring stations at different locations in the Houston area, two of which were part of the ARM facility and two were ancillary. The two stations associated directly with ARM were installed alongside other facilities managed and maintained by the TRACER research team during the intensive operational period (IOP), one located at the La Porte, Texas airport and the other located near Guy, Texas. Data from these stations were assimilated with similar data collected by the Harris County Flood Control District (HCFCD) to improve the spatial coverage of the real-time monitoring network. The ground-truth data were compared to the satellite-based (National Aeronautics and Space Administration [NASA]’s Soil Moisture Active Passive [SMAP] mission) data in the TRACER area of interest, and analyzed further to nowcast gridded data over the Houston area. The nowcasted, gridded data product was made available to TRACER researchers for use in climate and land-atmosphere interaction modeling that can help understand formation and persistence of convective storms in dense urban areas, and predict possible environmental events such as floods.