Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Polynuclear Speciation of Trivalent Cations near the Surface of an Electrolyte Solution

Despite long-standing efforts, there is no agreed upon structural model for electrolyte solutions at air-liquid interfaces. We report the simultaneous detection of the near-surface and bulk coordination environments of a trivalent metal cation (europium) in an aqueous solution by use of X-ray absorption spectroscopy. Within the first few nanometers of the liquid surface, the cations exhibit oxygen coordination typical of inner-sphere hydration of an aquated Eu3+ cation. Beyond that, outer-sphere ion-ion correlations are observed that are otherwise not present in the bulk electrolyte. The combination of near-surface and bulk sensitivities to probe metal ion speciation in electrolyte solutions is achieved by detecting electron-yield and X-ray fluorescence signals from an inverted pendant drop. The results provide new knowledge about the near-surface chemistry of aqueous solutions of relevance to aerosols and ion transport processes in chemical separations and biological systems.

Electrolytes↗

Molecular insights into ionic liquid/aqueous interface of phosphonium based phase-separable ionic liquids

Phosphonium based phase-separable ionic liquids (PSILs) are promising green solvents for dissolution of cellulose and lignin, a necessary step for conversion of biomass to fuels and chemicals. The knowledge of interfacial behavior of ionic liquid/solvent systems is critical for designing efficient separation processes. Here, molecular dynamics simulations are carried out for aqueous interface of tetraalkylphosphonium ionic liquids with chloride and acetate as anions to investigate IL miscibility with water. The transition zone from miscible to immiscible behavior was observed for alkyl chain lengths of 6 to 8. Emulsion phase was observed for [P8888]+ ion and multiple IL/water interface was observed for [P12121212]+ phosphonium cation. IL/water interface is observed to be enriched with solvated anions with phosphorous atom oriented towards the aqueous phase. The potential of mean force calculations suggest that as the alkyl chain of the phosphonium cations increase, so does the driving force for aggregation of cations in the aqueous phase. Due to the difference in the molecular shape and size, anions are better solvated by the water molecules, and these ions diffuse into the aqueous phase. Furthermore, the analysis of selected pair interactions provides insights into the nature of intermolecular forces and the role of the alkyl side chains on the interfacial properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of hydration energies of adsorbates at Pt(111) and liquid water interfaces using machine learning

Aqueous phase heterogeneous catalysis is important to various industrial processes, including biomass conversion, Fischer–Tropsch synthesis, and electrocatalysis. Accurate calculation of solvation thermodynamic properties is essential for modeling the performance of catalysts for these processes. Explicit solvation methods employing multiscale modeling, e.g., involving density functional theory and molecular dynamics have emerged for this purpose. Although accurate, these methods are computationally intensive. This study introduces machine learning (ML) models to predict solvation thermodynamics for adsorbates on a Pt(111) surface, aiming to enhance computational efficiency without compromising accuracy. In particular, ML models are developed using a combination of molecular descriptors and fingerprints and trained on previously published water–adsorbate interaction energies, energies of solvation, and free energies of solvation of adsorbates bound to Pt(111). These models achieve root mean square error values of 0.09 eV for interaction energies, 0.04 eV for energies of solvation, and 0.06 eV for free energies of solvation, demonstrating accuracy within the standard error of multiscale modeling. Feature importance analysis reveals that hydrogen bonding, van der Waals interactions, and solvent density, together with the properties of the adsorbate, are critical factors influencing solvation thermodynamics. Furthermore, these findings suggest that ML models can provide rapid and reliable predictions of solvation properties. This approach not only reduces computational costs but also offers insights into the solvation characteristics of adsorbates at Pt(111)–water interfaces.

Adsorption↗

Robust Method to Identify Groundwater Affected By Redox Conditions at Los Alamos National Laboratory Legacy Cleanup Site - 20497

To facilitate the mission of the Department of Energy's (DoE's) Environmental Management Program at Los Alamos National Laboratory (LANL), a significant number of groundwater monitoring wells with depths ranging from 152-396 meter were completed for characterization and monitoring. Groundwater at Los Alamos tends to be oxygen saturated with very low concentrations of organic matter. Drilling fluids can introduce residual carbon causing an increase in microbial activity and local reducing conditions around the well, potentially impacting representativeness of groundwater data quality for redox sensitive constituents. We assert that the redox state of the wells can robustly be identified by aqueous solution concentrations of iron and manganese. An automated review process has been built into a computer-based data management system enabling an efficient screening process for identifying reducing conditions that are not caught using standard data-validation protocol, and ensures that important data quality issues are thoroughly identified and addressed in an efficient and timely manner. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Can Mineral Growth by Oriented Attachment Lead to Incorporation of Uranium(VI) into the Structure of Goethite?

Oriented aggregation (OA), whereby crystals grow by successive attachment of precursor nanoparticles that are crystallographically co-aligned with the growing crystal, is a fundamental process by which many low solubility phases and minerals reach maturity in aqueous solution. Here, we investigated whether U(VI) can be incorporated into the structure of goethite that grows by OA. Wet chemical analysis and acid treatments showed that the additions of U(VI) early in the OA process hindered crystallization and increased the recalcitrant fraction of sorbed U(VI) relative to later addition of U(VI). Over time, however, the recalcitrant fraction of U(VI) decreased and converged to similar values for both early and late additions of U(VI). Electron microscopy indicated a portion of the acid resistant sorbed U(VI) was likely associated with grain boundaries between aggregating particles, not nanopores; and that these features were annealed out with increasing reaction time. Further, time elapsed imaging of U atom diffusion, that was stimulated by the electron beam, indicated that most sorbed U(VI) was not incorporated into the structure of goethite. This was confirmed and more rigorously quantified by ab initio molecular dynamics informed extended X-ray absorption fine structure spectra which indicated that only up to 5% of the recalcitrant U(VI) might be incorporated with an upper solubility limit of only U/Fe ~ 0.02 atom % in goethite where U(VI) was added early in the process. We conclude that most of the recalcitrant U(VI) is simply strongly adsorbed to the surface and that it is the uranyl oxygens that both inhibit crystallization of goethite as well as incorporation of U into the structure of goethite.

Soltis, Jennifer A.↗

Saltstone Waste Characterization Analysis - Salt Waste Processing Facility (SWPF) Waste Stream (Q4 CY2020)

The Saltstone Production and Disposal Facility is designed and permitted by the state of South Carolina Department of Health and Environmental Control (SCDHEC) to treat and dispose of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site (SRS). Low-level waste (LEW) aqueous streams from the Effluent Treatment Project (ETP) and decontaminated solutions from the Tank Closure Cesium Removal Unit (TCCR) and the Salt Waste Processing Facility (SWPF) are stored in Tank 50 until the LEW can be transferred to the Saltstone Facility for treatment and disposal. In the past, decontaminated solution from the Modular Caustic Side Solvent Extraction Unit (MCU) was stored in Tank 50 until the LEW could be transferred to the Saltstone Facility for treatment and disposal. MCU is currently in a suspended operations state. LEW that meets the Waste Acceptance Criteria (WAC) can be transferred, stored, and treated in the Saltstone Production Facility (SPF) for subsequent disposal as saltstone grout in the Saltstone Disposal Facility (SDF). Sampling will be conducted as new waste streams are identified for treatment and disposal at the Saltstone Industrial Wastewater Treatment Facility (IWTF) and Z-Area Industrial Solid Waste Landfill (ISWLF), Facility ID# 025500-1603, General Condition B.9 or every six years in accordance with South Carolina (SC) Regulation 61-107.19 Parti C, “Solid Waste Management: Solid Waste Landfills and Structural Fill - General Requirements.”

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis of an aqueous, air-stable, superconducting 1T'-WS 2 monolayer

Liquid-phase chemical exfoliation can achieve industry-scale production of two-dimensional (2D) materials for a wide range of applications. However, many 2D materials with potential applications in quantum technologies often fail to leave the laboratory setting because of their air sensitivity and depreciation of physical performance after chemical processing. We report a simple chemical exfoliation method to create a stable, aqueous, surfactant-free, superconducting ink containing phase-pure 1T'-WS 2 monolayers that are isostructural to the air-sensitive topological insulator 1T'-WTe 2 . The printed film is metallic at room temperature and superconducting below 7.3 kelvin, shows strong anisotropic unconventional superconducting behavior with an in-plane and out-of-plane upper critical magnetic field of 30.1 and 5.3 tesla, and is stable at ambient conditions for at least 30 days. Our results show that chemical processing can make nontrivial 2D materials that were formerly only studied in laboratories commercially accessible.

36 MATERIALS SCIENCE↗

Versatile coating with multifunctional performance for solar steam generation

In this work, a new kind of material, composite complex coating (CCC), with multifunctional performance has been developed for solar steam generation. The CCC has many advantages: (a) Scalability. The fabrication process is facile and mild; it can be realized in aqueous solution at room temperature, without high pressure, toxic organic solvents, or complex equipment. (b) Cost-effectiveness. The reagents used for preparation of CCC are low-cost and readily available. (c) Universality and stability. CCC firmly adheres on surfaces of various substrates with diverse shapes (cotton, filter paper, wood, polyurethane sponge, and even chemically inert and highly hydrophobic polyvinylidene fluoride membranes), and can withstand rinsing treatment (3000 r/min for 96 h), cyclic frost-thaw test (-18 °C ⇌ 30 °C, 90 times), and both high and low pH environments. In addition, many other reported coatings, such as carbon black, fail under similar process strain. (d) Anti-crude oil-fouling property. The CCC possesses stable superhydrophilicity and underwater superoleophobicity, which collectively endow substrates with the ability to resist fouling by oils. (e) Broad and strong light absorption. CCC can transform various substrates with diverse shapes into black materials with broadband light absorption due to its d-d transitions and rough surface. Together, these properties of CCC enable substrates with nearly any structural design to be easily transformed into photothermal materials for efficient solar steam generation. Furthermore, as a proof of concept, poplar wood is treated with CCC, achieving a water evaporation rate of ~1.8 kg m-2 h-1 (one sun), which is a record among wood-based photothermal materials.

14 SOLAR ENERGY↗

Aqueous synthesis and electrical properties of nano-crystalline PLZT capacitors.

Devices with nano-crystalline microstructures have been shown to possess improved electrical properties. Further advantages include lower processing temperatures; however, device fabrication from nano-particles poses several challenges. This presentation describes a novel aqueous synthesis technique to produce large batch sizes with minimal waste. The precipitate is readily converted at less than 550 C to a phase pure, nano-crystalline Pb{sub 0.88} La{sub 0.12}(Zr{sub 0.70} Ti{sub 0.30}){sub 0.97} O{sub 3} powder. Complications and solutions to sample fabrication from nano-powders are discussed, including the use of glass sintering aids to improve density and further lower sintering temperatures. Finally, electrical properties are presented to demonstrate the potential benefits of nano-crystalline capacitors.

36 MATERIALS SCIENCE↗

Abatement of radioiodine in aqueous reprocessing off-gas

The reprocessing used nuclear fuel (UNF) releases volatile fission and activation products, including 129 I, into the off-gas of a processing plant. Mitigation of the release of vapor phase radionuclides is necessary for meeting regulatory requirements in the United States and other countries. In an aqueous reprocessing plant, volatile radioiodine could be present in several forms, depending on the chemistry of the process used. Inorganic iodine will be the predominate species in any shearing or voloxidation pretreatment off-gas and dissolver off-gas (DOG). Organic iodides such as CH 3 I, C 4 H 9 I, and C 12 H 25 I have been proposed to be generated during solvent extraction; thus, these species must be captured from the vessel off-gas (VOG). The abatement of inorganic and organic iodide species to meet United States regulatory requirements has been demonstrated in laboratory experiments using Ag-based solid sorbents. The data presented in this paper includes the effect of gas composition (e.g., the presence of water vapor and NO x ), iodine speciation (I 2 , CH 3 I, C 4 H 9 I, C 12 H 25 I), and sorbent bed parameters (e.g., temperature, sorbent age) on complete iodine capture on Ag-mordenite in an aqueous reprocessing plant.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Summary report for the FY-2015 SACSESS Collaboration

During FY-2015, a collaborative research program was established by the Department of Energy-Nuclear Energy (DOE-NE) Material Recovery and Waste Form Development program and the European Union (EU) Safety of Actinide Separation Processes (SACSESS) program. One component of this collaboration was the evaluation of the radiolytic stability of a Selective ActiNide Extraction (SANEX) separation which utilized a TODGA-based organic solvent and an aqueous phase containing the hydrophilic complexing reagent, SO3-Ph-BTP. To best simulate process conditions, this experiment was irradiated in the radiolysis/hydrolysis test loop located at the Idaho National Laboratory. The effect of irradiation on a SACSESS program iSANEX formulation containing a TODGA-based organic phase and a BTP-based aqueous phase was investigated using irradiations at INL in static and test loop modes. When irradiated in contact with only the acidic aqueous phase, the TODGA organic solution maintained excellent extraction performance of americium, cerium and europium to a maximum absorbed dose of nearly 0.9 MGy. When the aqueous phase was changed to that containing the aqueous soluble BTP, the irradiated aqueous phase showed a dramatic color change, but this does not appear to have adverse effects on solvent extraction performance. Only minor increases in distribution ratios for both the lanthanides and actinide were measured, and the separation factors were essentially unchanged to a maximum absorbed dose of 174 kGy. The determination of the americium, cerium, and europium distribution ratios for the remaining SACSESS test loop samples will be completed in the near future. The analysis of stable metals concentration in the the irradiated aqueous and organic phases will be completed shortly.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of Acidity on Uranyl Nitrate Association in Aqueous Solutions: A Molecular Dynamics Simulation Study

Uranyl ion complexation with water and nitrate is a key aspect of the uranium/plutonium extraction process. We have carried out a molecular dynamics simulation study to investigate this complexation process, including the molecular composition of the various complex species, the corresponding structure, and the equilibrium distribution of the complexes. The observed structures of the complexes suggest that in aqueous solution, uranyls are generally hydrated by 5 water molecules in the equatorial plane. When associating with nitrate ions, a water molecule is replaced by a nitrate ion, preserving the five-fold coordination and planar symmetry. Analysis of the pair correlation function between uranyl and nitrate suggests that nitrates bind to uranyl in aqueous solution mainly in a monodentate mode, although a small portion of bidentates occur. Dynamic association and dissociation between uranyls and nitrates take place in aqueous solution with a substantial amount of fluctuation in the number of various uranyl nitrate species. The average number of the uranyl mononitrate complexes shows a dependence on acid concentration consistent with equilibrium-constant analysis, namely, the concentration of [UO2NO3]+ increases with nitric acid concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Safeguards Approach for Pyroprocessing Facilities

Pyroprocessing presents several new challenges for materials accountability and the overall design of a safeguards approach. While measurement techniques for aqueous plants have been optimized over several decades, the material and process differences for pyroprocessing require new approaches. This paper summarizes the safeguards challenges and a preliminary approach for materials accountability. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probing the Mechanism of Selective Phosphate Adsorption from Wastewater Using Aqueous and Synchrotron X-ray Characterization

Ion exchange shows promise for recovering phosphate from wastewater as value-added products, but requires high phosphate selectivity to compete with conventional treatment. Hybrid anion exchange (HAIX) resins, which contain non-selective basic functional groups and selective iron oxide nanoparticles (FeOnp), can effectively remove phosphate from wastewater. However, knowledge gaps remain regarding the mechanisms of phosphate selectivity and influence of competing ions, hindering needed efforts to model adsorption dynamics and design scalable adsorption processes for varying wastewaters. To address these gaps, we integrated aqueous-phase adsorption analysis with solid-phase, synchrotron-based X-ray characterization; this integration facilitated elucidation of the distribution and speciation of iron, phosphate, and competing anions on HAIX resins. We compared a quaternary ammonium-functionalized HAIX resin (SBA) to a tertiary amine version (WBA) to determine the role of functional groups. X-ray radiography revealed differences in FeOnp speciation (goethite vs. ferrihydrite) and distribution (peripheral vs. homogeneous) between the resins, resulting in varied phosphate affinity and intraparticle diffusion resistance. Using micro-X-ray fluorescence (μ-XRF) and micro-X-ray absorption near-edge structure (μ-XANES) spectroscopy, we identified differences in where and how phosphate binds across resin types and wastewaters. Across wastewater compositions, FeOnp sites in WBA contribute more to phosphate adsorption than in SBA, possibly due to variations in Fe distribution and speciation. Phosphate adsorption densities calculated from quantitative μ-XRF maps matched those from aqueous analysis, demonstrating the effectiveness of this integrated approach. Altogether, results demonstrate the use of synchrotron-based X-ray characterization for investigating adsorption mechanisms and advance HAIX as a phosphate recovery technology from complex wastewaters.

Nutrient recovery↗

U(IV) Aqueous Speciation from the Monomer to UO 2 Nanoparticles: Two Levels of Control from Zwitterionic Glycine Ligands

The fate of U(IV)O 2 in the environment in a colloidal form and its dissolution and growth in controlled environments is influenced by organic ligation and redox processes, where both affect solubility, speciation, and transport. Here we investigate U(IV) aqueous speciation from pH 0 to 3 with the glycine (Gly) ligand, the smallest amino acid. We document evolution of the monomeric to the hexameric form from pH 0 to 3 via UV–vis spectroscopy and small-angle X-ray scattering (SAXS). Crystals of the hexamer [U 6 O 4 (OH) 4 (H 2 O) 6 (HGly) 12 ]·12Cl–·12(H 2 O) (U 6 ) were isolated at pH 2.15. The structure of U 6 is a hexanuclear oxo/hydroxo cluster U 6 O 4 (OH) 4 decorated by 12 glycine ligands and 6 water molecules. The effect of pH and temperature on U 6 conversion to UO 2 nanoparticles, or simply reversible aggregation, is detailed by transmission electron microscopy imaging, in addition to SAXS and UV-spectroscopy. Because of the zwitterion behavior of glycine, pH and temperature control over U(IV) speciation is complex. Unexpectedly, stability of the polynuclear cluster actually increases with increased pH. Speciation is sensitive to not only metal-oxo hydrolysis but also ligand lability and hydrophobic ligand–ligand interactions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Trivalent chromium removal from aqueous solutions by a sol–gel synthesized silica adsorbent functionalized with sulphonic acid groups

Highlights: • Corpuscular sulphonic acid-functionalized silica holds improved uptake of chromium. • Mesopores on adsorbent facilitate (CH{sub 3}COO){sub 2}Cr{sup +} ion uptake on sulphonate sites. • Formation of chromium acetate sulphonate complex proposed from XPS results. • Fixed bed chromium uptake results suggest potential industrial use. - Abstract: A high capacity hybrid silica adsorbent was synthesized via sol–gel processing with sulphonic acid groups as trivalent chromium complex ions chelators from aqueous solutions. The synthesis included co-condensation of tetraethoxysilane (TEOS) with 3-(mercaptopropyl)trimethoxysilane (MPS), and oxidation of thiol to sulphonic acid groups. Chromium uptake kinetic, batch and fixed-bed experiments were performed to assess the removal of this metal from aqueous solutions. {sup 13}C, {sup 29}Si CPMAS NMR, FTIR, XPS were used to characterize the adsorbent structure and the nature of chromium complexes on the adsorbent surface. Chromium maximum uptake was obtained at pH 3 (72.8 mg/g). Elemental analysis results showed ligand density of 1.48 mmol sulphonic groups/g. About 407 mL of Cr(III) solution (311 mg/L) were treated to breakthrough point reaching ≤0.06 mg/L at the effluent. These results comply with USEPA regulation for chromium concentration in drinking water (≤0.1 mg/L). The adsorbent shows potential to be used in chromium separations to the industrial level.

36 MATERIALS SCIENCE↗

Accumulation of Antifreeze Proteins on Ice Is Determined by Adsorption

Antifreeze proteins (AFPs) enable the survival of organisms in freezing environments by binding to ice crystals and suppressing their growth. The rate at which AFPs accumulate on ice is determined by an interplay between their diffusion from the aqueous solution and their adsorption to the ice crystal. To interrogate the relative importance of these two processes, we combined fluorescence experiments with reaction–diffusion modeling. We found that as AFPs accumulate on ice, their concentration in the aqueous solution does not develop a gradient but remains equal to its bulk concentration throughout our experiments. Furthermore, these findings led us to conclude that AFP accumulation on ice crystals, which are smaller than 100 μm in radius, is not limited by the diffusion of AFPs, but by the kinetics of AFP adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗