Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Preferred orbit planes in the gravitational field of a tumbling spheroidal galaxy

An analytic method is described by means of which the preferred planes into which gas will settle by dissipative differential precession in a slightly nonspherical, nonstatic potential can be determined. Attention is given to the analysis of circular orbit precession in the external potential of a slightly prolate spheroidal mass that is tumbling about a short axis, providing a crude model for barred spiral galaxies as well as for prolate elliptical ones. The results obtained agree with previous work on the existence, orientation, and stability of periodic orbits in triaxial potentials. Depending on the source and injection geometry of the gas and on the nature of dissipation in the gas, the orbital dynamics presented could lead to enhanced, or even catastrophic, radial inflow and to steady state warped structures.

Durisen, R. H.↗
NASA NTRS1983

The shape of cooling filaments in old supernova remnants

The evolution of a filament in an old supernova remnant is investigated in two dimensions using analytical methods to determine its structure and stability and to show whether it collapses into a sheet or a cylinder. All parameters are assumed constant along the length of the feature. The cross section of the filament is found to flatten as it cools, and to degenerate into a thin sheet which is unstable to asymmetric warping disturbances. This probably leads to a number of parallel striations as the filament splits up, consistent with observations in the Cygnus Loop. The ratio of depth to width is typically 10:1, and so the feature may appear to be tubelike or a sheet, depending on perspective. The application to Vela and Puppis, IC 443, S 147, and CTB 1 is pointed out.

Smith, M. D.↗
NASA NTRS1983

Modified jet noise source model for twin-jet shielding analysis

An analytical method to estimate the influence that a jet of heated flow has on the noise emission from a parallel jet is presented. The shielding jet is modelled as a cylinder of constant cross-section in which the flow speed and temperature are uniform throughout. The jet noise emission is modelled by a point source with directivity imposed. The directivity term consists of: a self-noise term, a shear-noise term, and a convection factor. The self- and shear-noise terms each contain a basic directivity factor multiplying a spectral shape function. The various components are evaluated based on comparison with isothermal jet radiation experimental data. The modified source term is incorporated into the jet shielding model and compared to heated twin jet shielding data. The estimated spectra agree well except further downstream of the nozzle where peak of the noise spectrum estimated by the model lies approximately one octave below the experimental peak. The noise reduction estimated by the model agrees favorably with experiment in the near downstream region. This discrepancy is explained in terms of the shielding mechanism which is dominant far downstream.

Gerhold, C. H.↗
NASA NTRS1983

Comparison of broadband noise mechanisms, analyses, and experiments on helicopters, propellers, and wind turbines

Experimental data on broadband noise from airfoils are compared, together with analytical methods, in order to identify the mechanisms of noise emission. Rotor noise is categorized into discrete frequency, impulsive, and broadband components, the last having a continuous spectrum originating from a random source. The results of computer simulations of different rotor blade types which produce broadband noise were compared with experimental data and among themselves in terms of predictions of the spectra obtained. Consideration was given to the overall sound pressure level, unsteady turbulence forces, rotational forces, inflow turbulence, self-generated turbulence, and turbulence in the flow. Data are presented for a helicopter rotor and light aircraft propeller. The most significant source was found to be inflow turbulence induced lift fluctuations in helicopter rotors and boundary layer trailing edge noise on large wind energy conversion systems

George, A. R.↗
NASA NTRS1983

Design, analysis and test of composite curved frames for helicopter fuselage structure

Curved beam effects in composite frame structures representative of a light helicopter airframe are examined, and currently available analytical methods for studying these effects are briefly reviewed. A finite element study of curved composite frames is then reported, and it is shown that the curved frame effects must be accurately accounted for to avoid premature fracture. The finite element method is shown to be accurate to within 10 percent in accounting for the curved beam effects in composite structures.

Rich, M. J.↗
NASA NTRS1983

An analytical comparison of two wing structures for Mach 5 cruise airplanes

Mach 5 cruise research conducted by NASA is related to aerodynamics, propulsion, and structures. The study of structures includes the propulsion system, fuselage, and wings. Various studies have shown that the achievement of adequate range is largely dependent on a low structural mass fraction. The present investigation is concerned with a study of two wing structure configurations for Mach 5 aircraft. An uprated version (Ti-6242 replacing B-120 titanium) of the YF-12/SR-71 wing structure is considered. The B-120 titanium structure represents the current art of high speed aircraft wing structures. The YF-12 wing structure was designed about 20 years ago when the analytical methods for calculating thermal stresses were limited. The second wing structural configuration studied in the present investigation also used Ti-6242 materials but replaced the corrugated-beaded panels with diffusion bonded honeycomb-core sandwich panels, and replaced the z-stiffened shear webs with sine-wave stiffened shear webs.

Taylor, A. H.↗
NASA NTRS1983

Three-dimensional compressible viscous analysis of mixer nozzles

An analysis-based design procedure for compound-mixer exhaust nozzles is presented and compared to test data. The design approach is based on two numerical solutions to the 3-D viscous compressible Navier-Stokes equations: an equation splitting technique used for the analysis of the core and bypass flow, and a parabolic marching scheme used in the analysis of the mixing duct. The selection of the analytical methods through test data comparisons and their coupling into an integrated design system are discussed. NASA test data is used to demonstrate the validity of the computations from the exhaust system rating station, upstream of the mixer lobe, to the nozzle throat. An estimate is made of the savings in development time and cost utilizing the new procedure.

Goyal, R. K.↗
NASA NTRS1983

A study of dirigibles for use in the Peruvian Selva Central region

A study to evaluate dirigibles as transport vehicles in the mainly undeveloped and heavily forested Selva Central region of Peru is discussed. The basic requirements for dirigible service in the region are described, including those pertaining to cargoes and routes, airports, weather conditions, ground facilities, operations and maintenance base, hangars, ballast, and helium supply. Dirigible types, sizes, and economics were analyzed, and the analytical methods and results are reported. Total costs are determined and compared with those for other aircraft. It is concluded that dirigibles can be used as transport in the Selva Central and that conventional dirigibles in normal operation will require expansion of exisiting airfields. Conventional dirigibles are more economical as their size increases and are cost effective compared to selected aircraft.

Mayer, N. J.↗
NASA NTRS1983

Ablative thermal protection systems

The procedures used to establish the TPS (thermal protection system) design of the SRB (solid rocket booster) element of the Space Shuttle vehicle are discussed. A final evaluation of the adequacy of this design will be made from data obtained from the first five Shuttle flights. Temperature sensors installed at selected locations on the SRB structure covered by the TPS give information as a function of time throughout the flight. Anomalies are to be investigated and computer design thermal models adjusted if required. In addition, the actual TPS ablator material loss is to be measured after each flight and compared with analytically determined losses. The analytical methods of predicting ablator performance are surveyed.

Vaniman, J.↗
NASA NTRS1983

Launch vehicle aerodynamic data base development comparison with flight data

The aerodynamic development plan for the Space Shuttle integrated vehicle had three major objectives. The first objective was to support the evolution of the basic configuration by establishing aerodynamic impacts to various candidate configurations. The second objective was to provide continuing evaluation of the basic aerodynamic characteristics in order to bring about a mature data base. The third task was development of the element and component aerodynamic characteristics and distributed air loads data to support structural loads analyses. The complexity of the configurations rendered conventional analytic methods of little use and therefore required extensive wind tunnel testing of detailed complex models. However, the ground testing and analyses did not predict the aerodynamic characteristics that were extracted from the Space Shuttle flight test program. Future programs that involve the use of vehicles similar to the Space Shuttle should be concerned with the complex flow fields characteristics of these types of complex configurations.

Hamilton, J. T.↗
NASA NTRS1983

Nonlinear viscoelastic characterization of structural adhesives

Measurements of the nonliner viscoelastic behavior of two adhesives, FM-73 and FM-300, are presented and discussed. Analytical methods to quantify the measurements are given and fitted into a framework of an accelerated testing and analysis procedure. The single integral model used is shown to function well and is analogous to a time-temperature stress-superposition procedure (TTSSP). Advantages and disadvantages of the creep power law method used in this study are given.

Rochefort, M. A.↗
NASA NTRS1983

Dynamic certification of a thrust-measuring system for large solid rocket motors

The J-4 Rocket Test Cell and its Thrust Measuring System (TMS) at Arnold Engineering Development Center were modified to provide multicomponent force measurement of large solid rocket motors having nozzle gimbaling capability. To verify the structural integrity of a combined TMS and motor system, a large finite element model of the TMS and motor was developed using the NASTRAN computer program. Due to the importance of obtaining accurate estimates for the dynamic force levels, it was necessary to certify that the model adequately simulated the physical system. This was accomplished by performing a modal analysis test on the TMS and motor combination. The objectives were to discuss the physical characteristics of the TMS and motor that influence the NASTRAN model; to compare the frequency response characteristics computed using the NASTRAN model to those obtained from the modal analysis test; to discuss the experiences gained in modal analysis testing; and to demonstrate how state-of-the-art experimental and analytical methods are used in the design of ground test facilities.

Lemaster, R. A.↗
NASA NTRS1984

Flutter of swept fan blades

The effect of sweep on fan blade flutter is studied by applying the analytical methods developed for aeroelastic analysis of advance turboprops. Two methods are used. The first method utilizes an approximate structural model in which the blade is represented by a swept, nonuniform beam. The second method utilizes a finite element technique to conduct modal flutter analysis. For both methods the unsteady aerodynamic loads are calculated using two dimensional cascade theories which are modified to account for sweep. An advanced fan stage is analyzed with 0, 15 and 30 degrees of sweep. It is shown that sweep has a beneficial effect on predominantly torsional flutter and a detrimental effect on predominantly bending flutter. This detrimental effect is shown to be significantly destabilizing for 30 degrees of sweep.

Kielb, R. E.↗
NASA NTRS1984

Experimental study of bubble cavities attached to a rotating shaft in a reservoir

Bubble cavities formed by air entrainment and attached to a rotating shaft in an oil reservoir were studied. The cavities appear to the unaided eye as toroidal. High speed photography, however, reveals the individuality of the bubble cavities and their near solid body rotational characteristics. The cavities are distorted by the rotation effects but remain attached and tend to merge because of edge effects in the axial direction. The flow field within the reservoir is influenced by the unusual character of the two phase fluid found there; the vorticity is readily visualized. Other examples of vapor entrapment at the inlet of an eccentric rotor are also discussed. A simplified analytical method is provided, and a numerical analysis is being investigated. Vapor (void) entrainment and generation can significantly alter leakage rates and stability of seals, bearings, and dampers. Recognition of these effects in the component design systems will result only after detailed studies of the above phenomena.

Hendricks, R. C.↗
NASA NTRS1983

Development of a simplified procedure for rocket engine thrust chamber life prediction with creep

An analytical method for predicting engine thrust chamber life is developed. The method accounts for high pressure differentials and time-dependent creep effects both of which are significant in limiting the useful life of the shuttle main engine thrust chamber. The hot-gas-wall ligaments connecting adjacent cooling channels ribs and separating the coolant flow from the combustion gas are subjected to a high pressure induced primary stress superimposed on an alternating cyclic thermal strain field. The pressure load combined with strain-controlled cycling produces creep ratcheting and consequent bulging and thinning of these ligaments. This mechanism of creep-enhanced ratcheting is analyzed for determining the hot-gas-wall deformation and accumulated strain. Results are confirmed by inelastic finite element analysis. Fatigue and creep rupture damage as well as plastic tensile instability are evaluated as potential failure modes. It is demonstrated for the NARloy Z cases analyzed that when pressure differentials across the ligament are high, creep rupture damage is often the primary failure mode for the cycle times considered.

Badlani, M. L.↗
NASA NTRS1984

Monte Carlo calculations of elementary particle properties

The object of this project is to calculate the masses of the elementary particles. This ambitious goal apparently is not possible using analytic methods or known approximation methods. However, it is probable that the power of a modern super computer will make at least part of the low lying mass spectrum accessible through direct numerical computation. Initial attempts by several groups at calculating this spectrum on small lattices of space time points have been very promising. Using new methods and super computers considerable progress has been made towards evaluating the mass spectrum on comparatively large lattices. Only more time and faster machines with increased storage will allow calculations of systems with guaranteed minimal boundary effects. The ideas that currently go into this calculation are outlined.

Guralnik, G. S.↗
NASA NTRS1984

Results of the first complete static calibration of the RSRA rotor-load-measurement system

The compound Rotor System Research Aircraft (RSRA) is designed to make high-accuracy, simultaneous measurements of all rotor forces and moments in flight. Physical calibration of the rotor force- and moment-measurement system when installed in the aircraft is required to account for known errors and to ensure that measurement-system accuracy is traceable to the National Bureau of Standards. The first static calibration and associated analysis have been completed with good results. Hysteresis was a potential cause of static calibration errors, but was found to be negligible in flight compared to full-scale loads, and analytical methods have been devised to eliminate hysteresis effects on calibration data. Flight tests confirmed that the calibrated rotor-load-measurement system performs as expected in flight and that it can dependably make direct measurements of fuselage vertical drag in hover.

Acree, C. W., Jr.↗
NASA NTRS1984

Comprehensive silicon solar cell computer modeling

The development of an efficient, comprehensive Si solar cell modeling program that has the capability of simulation accuracy of 5 percent or less is examined. A general investigation of computerized simulation is provided. Computer simulation programs are subdivided into a number of major tasks: (1) analytical method used to represent the physical system; (2) phenomena submodels that comprise the simulation of the system; (3) coding of the analysis and the phenomena submodels; (4) coding scheme that results in efficient use of the CPU so that CPU costs are low; and (5) modularized simulation program with respect to structures that may be analyzed, addition and/or modification of phenomena submodels as new experimental data become available, and the addition of other photovoltaic materials.

Lamorte, M. F.↗