SEARCH · Engineering Papers

Results for “accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1989

High accuracy motor controller for positioning optical filters in the CLAES Spectrometer

The Etalon Drive Motor (EDM), a precision etalon control system designed for accurate positioning of etalon filters in the IR spectrometer of the Cryogenic Limb Array Etalon Spectrometer (CLAES) experiment is described. The EDM includes a brushless dc torque motor, which has an infinite resolution for setting an etalon filter to any desired angle, a four-filter etalon wheel, and an electromechanical resolver for angle information. An 18-bit control loop provides high accuracy, resolution, and stability. Dynamic computer interaction allows the user to optimize the step response. A block diagram of the motor controller is presented along with a schematic of the digital/analog converter circuit.

Thatcher, John B.↗

NASA NTRS1989

Evaluation of predictive accuracy in structural dynamic models

The evaluation of the predictive accuracy of dynamic models for future large space structures is addressed. Mass and stiffness uncertainties derived from a comparison of analytical and experimental modes are used to evaluate the uncertainty of response predictions based on the analytical model.

Hasselman, T. K.↗

NASA NTRS1989

Accuracy of vertical air motions from nadir-viewing Doppler airborne radars

This paper presents an analysis of the uncertainties expected in vertical velocities using a vertically pointing airborne Doppler radar which has a nadir or zenith-pointing beam. To examine the expected uncertainty, the Doppler velocity equation for a moving platform is derived and it is applied to cases of nadir-fixed and stabilized beams. The main emphasis of the paper is on the effect of platform stability on the deduced vertical air motions and it is shown that the antenna must be stabilized to obtain desired accuracy in the vertical velocity measurements.

Heymsfield, Gerald M.↗

NASA NTRS1990

Towards GPS orbit accuracy of tens of centimeters

In this paper, CASA Uno orbit results are presented utilizing data from four continents. Refinements in orbit modeling, combined with the availability of a worldwide tracking network and the dense distribution of tracking sites in North and South America, have improved orbit determination precision to about 60 cm (per component) for four of the seven GPS satellites tracked in CASA Uno. The orbit results are consistent with California baseline repeatabilities, which are at the few mm level in horizontal and length, and 1-2 cm in the vertical. Baseline comparisons with VLBI provide a measure of orbit accuracy, showing sub-cm agreement in length and 1.5 cm agreement in the horizontal.

Lichten, Stephen M.↗

NASA NTRS1990

Local and global accuracy estimates for boundary element analysis

An a posteriori error estimation strategy for the boundary element solution of two-dimensional heat conduction problem is presented. The error estimate formulation is based on the boundary element equations and employs a least squares fit of the solutions obtained from these equations. A local error estimate is evaluated for the unknown quantity in each element. The global error estimates are found from local (element) quantities. The range and accuracy of the proposed strategy is very good as demonstrated by problems containing smooth and non-smooth solutions.

Rencis, Joseph J.↗

NASA NTRS1990

High-accuracy, high-resolution gravity profiles from 2 years of the Geosat Exact Repeat Mission

Satellite altimeter data from the first 44 repeat cycles (2 years) of the Geosat Exact Repeat Mission (EWRM) were averaged to improve accuracy, resolution and coverage of the marine gravity field. Individual 17-day repeat cycles were first edited and differentiated, resulting in the along-track vertical deflection (i.e., gravity disturbance). To increase the signal-to-noise ratio, 44 of these cycles were then averaged to form a single highly accurate vertical deflection profile. The largest contribution to the vertical deflection error is short-wavelength altimeter noise and longer-wavelength oceanographic variability; the combined noise level is typically 6 microrad. Both types of noise are reduced by averaging many repeat cycles. Over most ocean areas the uncertainty of the average profile is less than 1 microrad which corresponds to 1 mgal of along-track gravity disturbance. However, in areas of seasonal ice coverage, its uncertainty can exceed 5 microrad. To assess the resolution of individual and average Geosat gravity profiles, the cross-spectral analysis technique was applied to repeat profiles. Individual Geosat repeat cycles are coherent (greater than 0.5) for wavelengths greater than about 30 km and become increasingly incoherent at shorter wavelengths.

Sandwell, David T.↗

NASA NTRS1989

On the accuracy of shape sensitivity derivatives

Six methods for calculating shape sensitivity derivatives are compared for a two-material beam problem with a moving interface. It is found that as the finite-element mesh is refined, displacement sensitivity derivatives converge more slowly than the displacement themselves. Five of the methods agree fairly well, but the adjoint variational surface method provides substantially different results. However, the difference is found to reflect convergence from another direction to the same answer, rather than reduced accuracy.

Haftka, Raphael T.↗

NASA NTRS1990

Relative efficiency and accuracy of two Navier-Stokes codes for simulating attached transonic flow over wings

In the present study, two codes which solve the three-dimensional Thin-Layer Navier-Stokes (TLNS) equations are used to compute the steady-state flow for two test cases representing typical finite wings at transonic conditions. Several grids of C-O topology and varying point densities are used. After a description of each code and test case, standards for determining code efficiency and accuracy are defined and applied to determine the relative performance of the two codes in predicting turbulent transonic wing flows. Comparisons of computed surface pressure distributions with experimental data are made.

Bonhaus, Daryl L.↗

NASA NTRS1989

Accuracy of lineaments mapping from space

The use of Landsat and other space imaging systems for lineaments detection is analyzed in terms of their effectiveness in recognizing and mapping fractures and faults, and the results of several studies providing a quantitative assessment of lineaments mapping accuracies are discussed. The cases under investigation include a Landsat image of the surface overlying a part of the Anadarko Basin of Oklahoma, the Landsat images and selected radar imagery of major lineaments systems distributed over much of Canadian Shield, and space imagery covering a part of the East African Rift in Kenya. It is demonstrated that space imagery can detect a significant portion of a region's fracture pattern, however, significant fractions of faults and fractures recorded on a field-produced geological map are missing from the imagery as it is evident in the Kenya case.

Short, Nicholas M.↗

NASA NTRS1990

Dynamic sea surface topography, gravity, and improved orbit accuracies from the direct evaluation of Seasat altimeter data

A gravitational model incorporating Seasat altimetry, surface gravimetry, and satellite tracking data has been determined in terms of global spherical harmonics complete to degree and order 50. This model, PGS-3337, uses altimeter data as a dynamic observation of the satellite's height above the sea surface. A solution for the ocean's dynamic topography is recovered simultaneously with the orbit parameters, gravity, and ocean tidal terms. The recovered dynamic topography reveals the global long wavelength circulation of the oceans with a resolution of 2000 km and is very similar to the mean upper ocean dynamic height derived from historical ship observations. The PGS-3337 geoid has an uncertainty of 60 cm rms globally but 25 cm rms over the ocean because of the altimeter measurements. Seasat orbits determined in this solution have an estimated accuracy for the radial position of 20 cm rms. The difference between the altimeter observed sea height and the geoid plus dynamic topography model is 30 cm rms. Contained in these residuals are the sea height variability, as well as errors from the geoid, orbits, tidal models, and altimeter range measurement. This performance level is 2 to 3 times better than that achieved with previous Goddard gravitational models.

Marsh, J. G.↗

NASA NTRS1990

High-accuracy Mars approach navigation with radio metric and optical data

The aerocapture of a space vehicle on hyperbolic approach to Mars results in tight navigation requirements at atmospheric entry. The purpose of this paper is to examine several different methods for approach navigation and to determine what accuracies are possible. The methods are broken into four groups as follows (1) navigation with only Deep Space Network (DSN) tracking of the approach vehicle, (2) navigation with the DSN plus ranging between the approach vehicle and spacecraft in orbit about Mars, (3) navigation with the DSN plus optical data involving the Martian moons, and (4) navigation with DSN range data and differenced range data involving the approach spacecraft and orbiters at Mars. If the current modeling errors that affect earth-based radio metric data, such as errors in tracking station locations, the Martian ephemeris, and differences in the quasar and planetary coordinate frames, are improved, then perhaps earth-based tracking could meet the entry error requirements imposed by aerocapture. If not, then the other three options of intervehicular range, optical data, or differenced range provide highly accurate entry knowledge at least twelve hours before entry.

Konopliv, Alex↗

NASA NTRS1990

Effect of atmospherics on beamforming accuracy

Two mathematical representations of noise due to atmospheric turbulence are presented. These representations are derived and used in computer simulations of the Bartlett Estimate implementation of beamforming. Beamforming is an array processing technique employing an array of acoustic sensors used to determine the bearing of an acoustic source. Atmospheric wind conditions introduce noise into the beamformer output. Consequently, the accuracy of the process is degraded and the bearing of the acoustic source is falsely indicated or impossible to determine. The two representations of noise presented here are intended to quantify the effects of mean wind passing over the array of sensors and to correct for these effects. The first noise model is an idealized case. The effect of the mean wind is incorporated as a change in the propagation velocity of the acoustic wave. This yields an effective phase shift applied to each term of the spatial correlation matrix in the Bartlett Estimate. The resultant error caused by this model can be corrected in closed form in the beamforming algorithm. The second noise model acts to change the true direction of propagation at the beginning of the beamforming process. A closed form correction for this model is not available. Efforts to derive effective means to reduce the contributions of the noise have not been successful. In either case, the maximum error introduced by the wind is a beam shift of approximately three degrees. That is, the bearing of the acoustic source is indicated at a point a few degrees from the true bearing location. These effects are not quite as pronounced as those seen in experimental results. Sidelobes are false indications of acoustic sources in the beamformer output away from the true bearing angle. The sidelobes that are observed in experimental results are not caused by these noise models. The effects of mean wind passing over the sensor array as modeled here do not alter the beamformer output as significantly as expected.

Alexander, Richard M.↗

NASA NTRS1990

Accuracy of the ERBS definitive attitude determination system in the presence of propagation noise

Definitive attitude solutions are supposed to be the most accurate possible. For the Earth Radiation Budget Satellite (ERBS), this has been accomplished by using gyro rates to transform many nonsimultaneous observations to a common time point and then averaging to reduce the effects of observation noise. Rate quality is critical to realizing improved accuracy with this method. Gyro deterioration, which shows up as large observation residuals and discontinuities between contiguous batch solutions, now discourages using the batch approach for ERBS. To address this problem, a simple Kalman filter is tried in place of the batch estimator. The filter works well as long as the attitude is completely observable. During periods without Sun coverage, however, the extrapolated yaw may diverge and then change abruptly when the Sun returns to the sensor field of view. Causes of this behavior are discussed, and some solutions are tried that address the observability aspect of the problem.

Chu, D.↗

NASA NTRS1990

The accuracy of dynamic attitude propagation

Propagating attitude by integrating Euler's equation for rigid body motion has long been suggested for the Earth Radiation Budget Satellite (ERBS) but until now has not been implemented. Because of limited Sun visibility, propagation is necessary for yaw determination. With the deterioration of the gyros, dynamic propagation has become more attractive. Angular rates are derived from integrating Euler's equation with a stepsize of 1 second, using torques computed from telemetered control system data. The environmental torque model was quite basic. It included gravity gradient and unshadowed aerodynamic torques. Knowledge of control torques is critical to the accuracy of dynamic modeling. Due to their coarseness and sparsity, control actuator telemetry were smoothed before integration. The dynamic model was incorporated into existing ERBS attitude determination software. Modeled rates were then used for attitude propagation in the standard ERBS fine-attitude algorithm. In spite of the simplicity of the approach, the dynamically propagated attitude matched the attitude propagated with good gyros well for roll and yaw but diverged up to 3 degrees for pitch because of the very low resolution in pitch momentum wheel telemetry. When control anomalies significantly perturb the nominal attitude, the effect of telemetry granularity is reduced and the dynamically propagated attitudes are accurate on all three axes.

Harvie, E.↗

NASA NTRS1991

Relative efficiency and accuracy of two Navier-Stokes codes for simulating attached transonic flow over wings

Two codes which solve the 3-D Thin Layer Navier-Stokes (TLNS) equations are used to compute the steady state flow for two test cases representing typical finite wings at transonic conditions. Several grids of C-O topology and varying point densities are used to determine the effects of grid refinement. After a description of each code and test case, standards for determining code efficiency and accuracy are defined and applied to determine the relative performance of the two codes in predicting turbulent transonic wing flows. Comparisons of computed surface pressure distributions with experimental data are made.

Bonhaus, Daryl L.↗

NASA NTRS1990

Mars observer - Orbital evolution, accuracy and control

The orbital phase and the major factors controlling the Mars Observer orbital evolution and accuracy are studied. Particular attention is given to the gravity field and atmospheric density. It is found that gravity field errors are reduced by the implementation of a gravity calibration period. A typical set of ground tracks corresponding to the optional mapping orbit definition is given.

Esposito, Pasquale B.↗

NASA NTRS1990

Sensitivity of high-accuracy Tracking and Data Relay Satellite System (TDRSS) user spacecraft orbit determination to tracking schedules

The results of a study to analyze the dependence of TDRSS user spacecraft orbit determination consistencies on varying tracking schedules are presented. In this study, the TDRS-East orbit determination results obtained utilizing Bilateration Ranging Transponder System data were evaluated. Six state parameters, three position and three velocity components and the solar radiation pressure coefficient, are estimated for TDRS-East. It is concluded that, in order to achieve high-precision orbit determination, the tracking coverage should not fall below 10 minutes every two orbits as decreasing it to every four orbits will significantly degrade the accuracy; present state-of-the-art consistency in orbit determination using TDRSS tracking is approximately 15 to 20 meters.

Doll, C. E.↗

NASA NTRS1991

Accuracy of the Burnett equations for hypersonic real gas flows

Burnett solutions for the structure of normal shock waves for Mach numbers ranging from 1.1 to 50 have been obtained by using the time-dependent equation set in conjunction with modern computational fluid dynamic techniques. The current work seeks to provide corrected and improved high-resolution direct simulation Monte Carlo (DSMC) results for hypersonic shocks in monatomic gases. These DSMC results will serve as a reliable test base for assessing the accuracy of various continuum equations more advanced than Navier-Stokes, such as the Burnett equations. The main conclusion of Fisko and Chapman (1988) that the Burnett equations are more accurate than the Navier-Stokes equations for all gases and at all Mach numbers in matching DSMC shock wave results is reassesed by comparing the improved and corrected DSMC results with continuum Burnett results. Various Burnett results for shocks in a diatomic gas, nitrogen, which include improvements to the work of Lumpkin and Chapman (1989) are presented. It is concluded that the Burnett equations represent a significant improvement over Navier-Stokes equations for flows exhibiting translational nonequilibrium.

Lumpkin, Forrest E., III↗