Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Ozone photochemistry and OH - A two-dimensional model study

Recent measurements of key HO(x) reaction rates are presented which imply that OH concentrations at altitudes below 30 km are lower than those predicted by current photochemical models. The consequences of the lower OH abundances are examined with respect to calculated perturbations of ozone by added nitrogen oxides, chlorine, and water vapor. Consideration is also given to the perturbation of stratospheric ozone by continuing release of chlorofluoromethanes in light of the new HO(x) reaction rates. The ozone loss is found to be reduced by about 25% compared with earlier estimates, mainly because the reduced OH abundance below 30 km slows the reaction between OH and HCl.

Whitten, R. C.↗
NASA NTRS1984

Aluminum chloride formation on Space Shuttle aluminum oxide

Samples of particulates collected from the exhaust of Space Shuttle launches STS-1, -4, -5, -6, and -7 were analyzed. Scanning electron microscopy and X-ray diffractometry of these samples indicated that the particulates were spherical and predominantly composed of aluminum oxide. The water-soluble weight fraction, pH, acid-soluble weight fraction, and insoluble weight fraction were determined for each sample. Water-soluble weight fractions averaged about 7 percent of the total sample weight, were generally very acidic, and contained significantly elevated concentrations of chloride and aluminum (III) ion. The high concentrations of soluble aluminum (III) and chloride ions observed suggested that aluminum chlorides and/or oxychlorides had formed on the surface of the alumina particulates. More than 72 percent by weight of each sample was insoluble in either water or strong mineral acid, and was identified as alpha-Al2O3. The results from these analyses suggest that the surface of Space Shuttle exhaust alumina particulates will be highly acidic and heavily chlorided, and that a substantial amount of the surface chloride may be chemically associated with aluminum (III) ions rather than just physically adsorbed as HCl.

Cofer, W. R., III↗
NASA NTRS1986

Emission of methane and other trace gases from the Amazon Varzea

Researchers measured the distributions and fluxes of methane and other trace gases from the various Amazon floodplain environments. These were determined during both a large scale, quasi-synoptic survey along a 2000 km reach of the Amazon river and an intensive local study (by J. Melack, R. Harriss et al.) covering a six-week period. The environments studied included the major rivers, connecting channels (paranas), floating macrophyte beds, flooded forests, open lakes and recently wetted soils. The results are summarized. Measured rates of methane emission averaged about 300 mg m-2 d-1, but with considerable variance, and were comparable to or higher than previously reported emissions from similar temperature zone environments. In general, areas covered by floating macrophytes showed the highest emissions. Individual hotspots had among the highest rates ever observed, over 10 g m-2 d-1. The high methane emissions appear to result because about 50% of the organic matter fixed on the floodplain (either terrestrial or aquatic) that is oxidized in the water is decomposed anaerobically via methanogensis. Measured fluxes of methane to the atmosphere appear to be significantly correlated with surface water dissolved methane concentrations.

Richey, Jeffrey E.↗
NASA NTRS1991

Options for Martian propellant production

A quantitative evaluation methodology for utilizing in-situ resources on Mars for the production of useful substances. The emphasis is on the chemical processes. Various options considering different feedstock (mostly, carbon dioxide, water, and iron oxides) are carefully examined for the product mix and the energy needs. Oxygen, carbon monoxide, alcohols, and other chemicals are the end products. The chemical processes involve electrolysis, methanation, and variations. It is shown that maximizing the product utility is more important than the production of oxygen, methane, or alcohols. An important factor is the storage of the chemicals produced. The product utility is dependent, to some extent, upon the mission. A combination of the stability, the enthalpy of formation, and the mass fraction of the products is seen to yield a fairly good quantitative feel for the overall utility and maximum mission impact.

Dowler, Warren↗
NASA NTRS1991

The formation of peroxonitrites and oxygen on Mars

When Martian regolith samples are moistened with water, a strong oxidant and oxygen gas are released. The many possible oxidants which have been suggested as present, including superoxide (O2(-)) hydrogen peroxide (H2O2(-)), and manganese (IV) oxide (MnO2), as well as peroxonitrite (ONOO(-)), can be distinguished by their ability to account for the numerous observations of the Viking Labelled Release (LR) and Gas Exchange (GEX) experiments. The magnitudes, kinetics, and heat labilities of the LR experiments and the magnitudes and heat labilities of the GEX experiments have been quantitatively replicated with peroxonitrites. Further, it is to be expected from information about the photochemistry of nitrogen in the atmosphere, the calculated fluxes of the NO(x) to the surface, the known reactions of NO(x) with carbonates to produce nitrates and photolysis studies of nitrates, that peroxonitrites are present on Mars. However, considerable uncertainty has existed about the form in which oxygen is stored in photolyzed nitrate crystals. Models have ranged from micropores of O2 to chemically bound oxygen as peroxonitrite (O2NOO(-)), as well as peroxonitrite. Studies of the solution chemistry and solid state photochemistry were completed, which show that much of the oxygen evolved on wetting comes from thermal breakdown of peroxonitrite after it is dissolved. A chemical model is developed for the photochemical processes occurring during UV irradiation of solid nitrates which resolves the several contradictory models discussed in the literature in recent years.

Plumb, Robert C.↗
NASA NTRS1992

Lunar cement

With the exception of water, the major oxide constituents of terrestrial cements are present at all nine lunar sites from which samples have been returned. However, with the exception of relatively rare cristobalite, the lunar oxides are not present as individual phases but are combined in silicates and in mixed oxides. Lime (CaO) is most abundant on the Moon in the plagioclase (CaAl2Si2O8) of highland anorthosites. It may be possible to enrich the lime content of anorthite to levels like those of Portland cement by pyrolyzing it with lunar-derived phosphate. The phosphate consumed in such a reaction can be regenerated by reacting the phosphorus product with lunar augite pyroxenes at elevated temperatures. Other possible sources of lunar phosphate and other oxides are discussed.

Agosto, William N.↗
NASA NTRS1993

The importance of environmental conditions in reflectance spectroscopy of laboratory analogs for Mars surface materials

Reflectance spectra are presented here for a variety of particulate, ferric-containing analogs to Martian soil (Fe(3+)-doped smectites and palagonites) to facilitate interpretation of remotely acquired spectra. The analog spectra were measured under differing environmental conditions to evaluate the influence of exposure history on water content and absorption features due to H2O in these samples. Each of these materials contains structural OH bonded to metal cations, adsorbed H2O, and bound H2O (either in a glass, structural site, or bound to a cation). Previous experiments involving a variety of Mars analogs have shown that the 3 micron H2O band in spectra of palagonites is more resistant to drying than the 3 micron H2O band in spectra of montmorillonites. Other experiments have shown that spectra of ferrihydrite and montmorillonites doped with ferric sulfate also contain sufficient bound H2O to retain a strong 3 micron band under dry conditions. Once the effects of the environment on bound water in clays, oxides, and salts are better understood, the hydration bands measured via reflectance spectroscopy can be used to gain information about the chemical composition and moisture content of real soil systems. Such information would be especially useful in interpreting observations of Mars where subtle spatial variations in the strengths of metal-OH and H2O absorptions have been observed in telescopic and ISM spectra. We measured bidirectional reflectance spectra of several Mars soil analogs under controlled environmental conditions to assess the effects of moisture content on the metal-OH and H2O absorptions. The samples analyzed include chemically altered montmorillonites, ferrihydrite. and palagonites from Hawaii and Iceland. Procedures for preparation of the cation-exchanged montmorillonites, ferric-salt doped montmorillonites, and ferric oxyhydroxides are described in detail elsewhere.

Bishop, J.↗
NASA NTRS1996

Regional Comparisons of Satellite (AVHRR) and Space Shuttle (MAPS) Derived Estimates of CO and Aerosol Concentrations

Biomass burning is considered to be a major source of trace gas species and aerosol particles which play a vital role in tropospheric chemistry and climate. Anthropogenic biomass burning has largely expanded in the last 15 years, due to increased deforestation practices in the Amazon Basin, as well as to clear land for shifting cultivation in South America, southern Asia, and Africa. Biomass burning produces large amounts of carbon dioxide, carbon monoxide (CO), water, hydrocarbons, nitrous oxides, and smoke particles.

Vulcan, D. V.↗
NASA NTRS2002

Transient Mixing Driven by Buoyancy Flows

Mixing driven by buoyancy-induced flows is of particular interest to microgravity processes, as the body force that governs the intensity of flow fields can be directly controlled. We consider a model experimental system to explore the dynamics of mixing which employs two miscible liquids inside a cavity separated initially by a divider. The two liquids are oriented vertically inside a rectangular cavity with constant width and height, and varying depths to span the range of a Hele-Shaw cell to a 3-[) configuration. The two miscible liquids can be sufficiently diluted and died, for example water and deuterium oxide, such that a distinct interface exists across the divider. The transient mixing characteristic of the two fluids is addressed by following the Lagrangian history of the interface for various aspect ratios in the z-plane (depth variation) as well as a range of pulling velocities of the divider. The mixing characteristics of the two fluids are quantified from measurement of the length stretch of the interface and its flow field using respectively image processing techniques and Particle Imaging Velocimetry. Scaling analysis shows that the length stretch depends on four governing parameters, namely the Grashof number (Gr), Schmidt number (Sc), aspect ratio (Ar), and Reynolds number (Re). Variation of the Schmidt number is taken into account through thermophysical property variation. Thus our problem reduces to a codimension three bifurcation in parametric space for Gr, Ar, and Re. Our experimental results show that for Gr on the order of 106 and a nominal cavity aspect ratio Ar = 0.2, the net effect of removal of the divider and the overwhelming buoyancy force causes an overturning motion which stretches and folds the interface to produce ml internal breakwave. The structure of the breakwave is similar to the ubiquitous Rayleigh-Taylor instability morphology. The breakwave is dissipated either through internal or wall collision depending on the impulsive velocity of the divider as prescribed by the Reynolds number. The decay of the collision event occurs through sloshing oscillations over a short time scale. The two fluids then become stably stratified with a diffusive band at the interface indicating local mass transport. The local bifurcation of the internal breakwave is investigated as a function of aspect ratio. Results show that for narrow cavities on the order of 2mm (Ar = 0.04) folding does not occur, the interface only stretches. As the cavity size increases folding occurs through a supercritical bifurcation. Insight into the mechanism of folding is obtained from measurement of the flow field which shows that in the neighborhood of the folding event, there exists hyperbolic points caused by multiple vortex interactions. The global length stretch of the interface as a function of time is nearly Gaussian; calculations of finite-time Liapunov exponents as well as construction of horseshoe maps indicate the likelihood of a chaotic transient.

W.M.B. Duval↗
NASA NTRS2004

Advanced Oxide Material Systems for 1650 C Thermal/Environmental Barrier Coating Applications

Advanced thermal and environmental barrier coatings (TEBCs) are being developed for low-emission SiC/SiC ceramic matrix composite (CMC) combustor and vane applications to extend the CMC liner and vane temperature capability to 1650 C (3000 F) in oxidizing and water-vapor-containing combustion environments. The advanced 1650 C TEBC system is required to have a better high-temperature stability, lower thermal conductivity, and more resistance to sintering and thermal stress than current coating systems under engine high-heat-flux and severe thermal cycling conditions. In this report, the thermal conductivity and water vapor stability of selected candidate hafnia-, pyrochlore- and magnetoplumbite-based TEBC materials are evaluated. The effects of dopants on the materials properties are also discussed. The test results have been used to downselect the TEBC materials and help demonstrate the feasibility of advanced 1650 C coatings with long-term thermal cycling durability.

Zhu, Dong-Ming↗
NASA NTRS2004

Hafnia-Based Materials Developed for Advanced Thermal/Environmental Barrier Coating Applications

Thermal and environmental barrier coatings (T/EBCs) will play a crucial role in advanced gas turbine engine systems because of their ability to significantly increase engine operating temperatures and reduce cooling requirements, and thus help achieve engine goals of low emissions and high efficiency. Under the NASA Ultra-Efficient Engine Technology (UEET) Project, advanced T/EBCs are being developed for low-emission SiC/SiC ceramic matrix composite (CMC) combustor applications by extending the CMC liner and vane temperature capability to 1650 C (3000 F) in oxidizing and water-vaporcontaining combustion environments. The coating system is required to have increased phase stability, lower lattice and radiation thermal conductivity, and improved sintering and thermal stress resistance under high-heat-flux and thermal-cycling engine conditions. Advanced heat-flux testing approaches (refs. 1 to 4) have been established at the NASA Glenn Research Center for 1650 C coating developments. The simulated combustion water-vapor environment is also being incorporated into the heat-flux test capabilities (ref. 3).

Zhu, Dongming↗
NASA NTRS2004

Advanced Oxide Material Systems For 1650 C Thermal/Environmental Barrier Coating Applications

Advanced thermal/environmental barrier coatings (T/EBCs) are being developed for low emission SiC/SiC ceramic matrix composite (CMC) combustor and vane applications to extend the CMC liner and vane temperature capability to 1650 C (3000 F) in oxidizing and water-vapor containing combustion environments. The 1650 C T/EBC system is required to have better thermal stability, lower thermal conductivity, and improved sintering and thermal stress resistance than current coating systems. In this paper, the thermal conductivity, water vapor stability and cyclic durability of selected candidate zirconia-/hafnia-, pyrochlore- and magnetoplumbite-based T/EBC materials are evaluated. The test results have been used to downselect the T/EBC coating materials, and help demonstrate advanced 1650OC coatings feasibility with long-term cyclic durability.

Zhu, Dongming↗
NASA NTRS2010

RESOLVE's Field Demonstration on Mauna Kea, Hawaii 2010

In cooperation with the Canadian Space Agency, and the Northern Centre for Advanced Technology, Inc., NASA has undertaken the In-Situ Resource Utilization (ISRU) project called RESOLVE (Regolith and Environment Science & Oxygen and Lunar Volatile Extraction). This project is an Earth-based lunar precursor demonstration of a system that could be sent to explore permanently shadowed polar lunar craters, where it would drill into regolith, quantify the volatiles that are present, and extract oxygen by hydrogen reduction of iron oxides. The resulting water could be electrolyzed into oxygen to support exploration and hydrogen, which would be recycled through the process. The RESOLVE chemical processing system was mounted on a Canadian Space Agency mobility chasis and successfully demonstrated on Hawaii's Mauna Kea volcano in February 2010. The RESOLVE unit is the initial prototype of a robotic prospecting mission to the Moon. RESOLVE is designed to go to the poles of the Moon to "ground truth" the form and concentration of the hydrogen/water/hydroxyl that has been seen from orbit (M3, Lunar Prospector and LRO) and to test technologies to extract oxygen from the lunar regolith. RESOLVE has the ability to capture a one-meter core sample of lunar regolith and heat it to determine the volatiles that may be released and then demonstrate the production of oxygen from minerals found in the regolith. The RESOLVE project, which is led by KSC, is a multi-center and multi-organizational effort that includes representatives from KSC, JSC, GRC, the Canadian Space Agency, and the Northern Center for Advanced Technology (NORCAT). This paper details the results obtained from four days of lunar analog testing that included gas chromatograph analysis for volatile components, remote control of chemistry and drilling operations via satalite communications, and real-time water quantification using a novel capacitance measurement technique.

Captain, Janine↗
NASA NTRS2011

Phase change material for temperature control and material storage

A phase change material comprising a mixture of water and deuterium oxide is described, wherein the mole fraction of deuterium oxide is selected so that the mixture has a selected phase change temperature within a range between 0.degree. C. and 4.degree. C. The mixture is placed in a container and used for passive storage and transport of biomaterials and other temperature sensitive materials. Gels, nucleating agents, freezing point depression materials and colorants may be added to enhance the characteristics of the mixture.

Wessling, Jr., Francis C.↗
DOE OSTI2023

Electrolyzer and method of use

Disclosed are membrane electrode assemblies having a cathode layer comprising a carbon oxide reduction catalyst that promotes reduction of a carbon oxide; an anode layer comprising a catalyst that promotes oxidation of a water; a polymer electrolyte membrane (PEM) layer disposed between, and in contact with, the cathode layer and the anode layer; and a salt having a concentration of at least about 10 uM in at least a portion of the MEA.

Cave, Etosha R.↗
DOE OSTI2023

Bison Verification and Validation Activities for TRISO

Numerical modeling and simulation (M&S) tools play a key role in the research, development, and overall safety assessments of next-generation nuclear energy systems. One such tool, Bison, is a nuclear fuel performance code that is applicable to many fuel forms (e.g., light-water reactor fuel, oxide and metallic fuel for fast reactors, tri-structural isotropic (TRISO) fuel, and plate fuel), and it uses the finite element method to model the thermo- mechanical response of nuclear fuels. One fuel form widely utilized in Generation-IV high-temperature gas-cooled and fluoride- salt-cooled nuclear reactor concepts is TRISO fuel. Recently, Bison’s capabilities were significantly expanded to enable it to model the performance of TRISO particles and compacts. It is important that Bison’s computational results be reliable and predictive, since this code is used to inform high-consequence decisions. The various processes developed to address this issue generally entail two fundamental steps: verification and validation (V&V). Verification ensures that the code functions correctly and is reliable. Code/solution verification, code benchmark, and software quality assurance exercises are examples of verification activities. On the other hand, validation is the process of assessing a code’s capability to accurately model physical problems. Comparisons between code results and experiments quantify the validation level. Application of V&V procedures is crucial to the development of computational tools that are free of coding mistakes and can accurately represent reality. The current study presents an overview of Bison V&V activities relevant to the TRISO fuel concept, which include code/solution verification exercises, CRP-6 Benchmark—a Coordinated Research Program through the International Atomic Energy Agency (IAEA)—exercises, and validation exercises with the Advanced Gas Reactor (AGR)- 1/2/3/4 experiment series.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2011

Iridium-Doped Ruthenium Oxide Catalyst for Oxygen Evolution

NASA requires a durable and efficient catalyst for the electrolysis of water in a polymer-electrolyte-membrane (PEM) cell. Ruthenium oxide in a slightly reduced form is known to be a very efficient catalyst for the anodic oxidation of water to oxygen, but it degrades rapidly, reducing efficiency. To combat this tendency of ruthenium oxide to change oxidation states, it is combined with iridium, which has a tendency to stabilize ruthenium oxide at oxygen evolution potentials. The novel oxygen evolution catalyst was fabricated under flowing argon in order to allow the iridium to preferentially react with oxygen from the ruthenium oxide, and not oxygen from the environment. Nanoparticulate iridium black and anhydrous ruthenium oxide are weighed out and mixed to 5 18 atomic percent. They are then heat treated at 300 C under flowing argon (in order to create an inert environment) for a minimum of 14 hours. This temperature was chosen because it is approximately the creep temperature of ruthenium oxide, and is below the sintering temperature of both materials. In general, the temperature should always be below the sintering temperature of both materials. The iridium- doped ruthenium oxide catalyst is then fabricated into a PEM-based membrane- electrode assembly (MEA), and then mounted into test cells. The result is an electrolyzer system that can sustain electrolysis at twice the current density, and at the same efficiency as commercial catalysts in the range of 100-200 mA/sq cm. At 200 mA/sq cm, this new system operates at an efficiency of 85 percent, which is 2 percent greater than commercially available catalysts. Testing has shown that this material is as stable as commercially available oxygen evolution catalysts. This means that this new catalyst can be used to regenerate fuel cell systems in space, and as a hydrogen generator on Earth.

Valdez, Thomas I.↗
DOE OSTI2024

Monovalent ion–graphene oxide interactions are controlled by carboxylic acid groups: Sum frequency generation spectroscopy studies

Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO–ion–water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. Here, we also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗