Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Effects of uncertainty on manual tracking performance

Transient phenomena and target acquisition modes associated with interrupted observations during ground-to-air AA tracking were investigated. Using a two-axes control stick, the subjects tracked a computer-generated airplane image on a CRT display. The airplane image excuted a low-level straight pass. At certain pseudo-random times during each 25-second run, the screen was blanked for a period of one second. When the target image reappeared, the subjects reacquired it and continued tracking, attempting to minimize vector RMS error for the entire run (including the blanked period). The results reveal an increase both in tracking error and in error variance during the blanked period, only when the target disappears while in the crossover region. Blanking at other times effected increased variance but had no effect on the mean error. A blanking period just before crossover produced an increase lag while a blanking just after crossover resulted in a lead and thus made the error curve more symmetric.

Ephrath, A. R.↗
NASA NTRS1977

A low cost high temperature sun tracking solar energy collector

The design and economic evaluation of a low cost high temperature two-axis, sun tracking solar energy collector is described. The collector design was specifically intended for solar energy use with the freedom of motion about its two control axes limited only to the amplitude required to track the sun. An examination of the performance criteria required in order to track the sun and perform the desired solar energy conversion was used as the starting point and guide to the design. This factor, along with its general configuration and structural aspect ratios, was the significant contributor to achieving low cost. The unique mechanical design allowed the control system to counter wide tolerances specified for the fabrication of the azimuth frame and to perform within a small tracking error.

Perkins, G. S.↗
NASA NTRS1978

Orbit determination accuracies using satellite-to-satellite tracking

The results are reported of the ATS-6/GEOS-3 and the ATS-6 Nimbus-6 satellite-to-satellite orbit determination experiments. NASA intends to use the tracking data relay satellite system for operational orbit determination of NASA satellites. Hence, in the near future, satellite-to-satellite tracking data will be routinely processed to obtain orbits. The satellite-to-satellite tracking system used in the ATS-6/Nimbus-6 and ATS-6/GEOS-3 experiments performed with a resolution of 1 to 2 m in range and less than 1 mm/s in range rate for a 10-s averaging. A Bayesian least squares estimation technique utilizing independent ranging to the synchronous relay satellite was determined to be the most effective procedure for estimating orbits from satellite-to-satellite tracking data. The use of this technique yields estimates of user satellite orbits which are comparable in accuracy to what is usually obtained from ground based systems.

Vonbun, F. O.↗
NASA NTRS1978

Effect of the Mott cross section on the determination of the charge of ultraheavy cosmic rays from emulsion tracks

Energy deposition due to secondary electrons is calculated as a function of distance from the axis of the track of a heavy ion. The calculation incorporates the empirical formulas of Kobetich and Katz (1968) for delta-ray energy dissipation. Both the Mott and Born-approximation expressions for the delta-ray energy distributions are used, and the results are compared. The energy deposition projected along a line perpendicular to the track is also calculated. These results are used to estimate the effect that the use of the Mott cross section would have in the interpretation of photometric measurements on emulsion tracks of trans-iron cosmic-ray particles. It is shown that the use of 50 keV as a characteristic track-formation electron energy to estimate the effect of the Mott cross section systematically overestimates charge as derived from emulsions for Z greater than 20.

Eby, P. B.↗
NASA NTRS1981

Physiological assessment of operator workload during manual tracking. 1: Pupillary responses

The feasibility of pupillometry as an indicator for assessing operator workload during manual tracking was studied. The mean and maximum pupillary responses of 12 subjects performing tracking tasks with three levels of difficulty (bandwidth of the forcing function were 0.15, 0.30 and 0.50 Hz respectively) were analysed. The results showed that pupillary dilation increased significantly as a function of the tracking difficulty which was reflected by the significant increase of tracking error (RMS). The present study supplies additional evidence that pupillary response is a sensitive and reliable index which may serve as an indicator for assessing operator workload in man-machine systems.

Jiang, Q.↗
NASA NTRS1981

Some effects of Field Of View (FOV) and target size on lateral tracking at hover

An exploratory flight-simulator experiment examined the gross effects of several factors potentially important to the design of a visual display system for aiding VTOL pilots in the difficult task of landing on a small sea-control ship. Field of view (FOV) and target size were the primary variables examined for a lateral tracking task in a full motion 5 degree-of-freedom hover simulation. The mean absolute value of tracking error was used to measure tracking performance, and cross spectral transfer function analysis was performed to determine the pilot's ability to generate good open-loop transfer function characteristics as a function of the experimental variables. It was found that FOV and target size can have a large effect on the pilot's ability to generate open-loop gain, and on his tracking performance.

Breul, H. T.↗
NASA NTRS1981

Consolidation of NASA tracking stations into a single ground network in the TDRSS era

NASA has operated two separate worldwide ground-based tracking and data acquisition networks for support of its various missions. The Spaceflight Tracking and Data Network (STDN) has provided support to all NASA earth orbiting spacecraft. The Deep Space Network (DSN) supports almost exclusively those unmanned exploratory spacecraft which have been sent far from earth. The Tracking and Data Relay Satellite System (TDRSS), which is conceptually a part of the STDN, will soon be added to the first two networks. The TDRSS will consist of two geosynchronous satellites together with a single ground terminal in White Sands, New Mexico. The TDRSS was conceived as a means of providing improved tracking and data relay service for a large class of the earth orbiting satellites. An investigation was conducted with the objective to reduce the costs of providing support to those spacecraft which were not TDRS-compatible. It was recommended that the core sites of the Ground segment of the STDN (GSTDN) be consolidated into the DSN

Layland, J. W.↗
NASA NTRS1981

NASA tracking and data acquisition in the 1990s - High earth orbit and planetary spacecraft support

It is pointed out that during the decade of the 1980's the Deep Space Network (DSN) and the ground stations of the Ground Spaceflight Tracking Data Network (GSTDN) will have been consolidated into one ground-based network to provide services for tracking and data acquisition for NASA deep space probes and highly elliptical earth orbiters. The Tracking and Data Relay Satellite System (TDRSS) will have been implemented to handle low earth orbiters. Anticipated solar system exploration missions of the 1990's are discussed, and a description is presented of the new tracking and data acquisition requirements for supporting these missions. The technology options needed to meet these new requirements are identified, and the impact of these technology options on the consolidated DSN is discussed. Attention is given to the evolution of the DSN of the 1980's into the DSN of the year 2000.

Smith, J. G.↗
NASA NTRS1980

Interplanetary dust collected in the earth's stratosphere - The question of solar flare tracks

The negative result of a transmission electron microscope (TEM) search for solar flare tracks in 10 micron interplanetary dust particles (Flynn et al., 1978) which have been collected in the earth's stratosphere with a program of sampling initiated by Brownlee et al. (1976) has been reported previously. In this paper, it is shown that silicates in the particles record laboratory iron-ion tracks which are detectable in the TEM. The absence of tracks in the silicates could be due to track annealing on atmospheric entry, and may indicate a particle emissivity below 0.3, or that many of the particles broke up on encounter with the atmosphere. Alternatively, the lifetime of 10 micron dust particles at 1 AU could be shorter than that given by previous estimates.

Fraundorf, P.↗
NASA NTRS1983

Electric vehicle chassis dynamometer test methods at JPL and their correlation to track tests

Early in its electric vehicle (EV) test program, JPL recognized that EV test procedures were too vague and too loosely defined to permit much meaningful data to be obtained from the testing. Therefore, JPL adopted more stringent test procedures and chose the chassis dynamometer rather than the track as its principal test technique. Through the years, test procedures continued to evolve towards a methodology based on chassis dynamometers which would exhibit good correlation with track testing. Based on comparative dynamometer and track test results on the ETV-1 vehicle, the test methods discussed in this report demonstrate a means by which excellent track-to-dynamometer correlation can be obtained.

Marte, J.↗
NASA NTRS1982

Modeling of the Mode S tracking system in support of aircraft safety research

This report collects, documents, and models data relating the expected accuracies of tracking variables to be obtained from the FAA's Mode S Secondary Surveillance Radar system. The data include measured range and azimuth to the tracked aircraft plus the encoded altitude transmitted via the Mode S data link. A brief summary is made of the Mode S system status and its potential applications for aircraft safety improvement including accident analysis. FAA flight test results are presented demonstrating Mode S range and azimuth accuracy and error characteristics and comparing Mode S to the current ATCRBS radar tracking system. Data are also presented that describe the expected accuracy and error characteristics of encoded altitude. These data are used to formulate mathematical error models of the Mode S variables and encoded altitude. A brief analytical assessment is made of the real-time tracking accuracy available from using Mode S and how it could be improved with down-linked velocity.

Sorensen, J. A.↗
NASA NTRS1983

Deep Space Navigation with Noncoherent Tracking Data

Navigation capabilities of noncoherent tracking data are evaluated for interplanetary cruise phase and planetary (Venus) flyby orbit determination. Results of a formal covariance analysis are presented which show that a combination of one-way Doppler and delta DOR yields orbit accuracies comparable to conventional two-way Doppler tracking. For the interplanetary cruise phase, a tracking cycle consisting of a 3-hour Doppler pass and delta DOR (differential one-way range) from two baselines (one observation per overlap) acquired 3 times a month results in 100-km orbit determination accuracy. For reconstruction of a Venus flyby orbit, 10 days tracking at encounter consisting of continuous one-way Doppler and delta DOR sampled at one observation per overlap is sufficient to satisfy the accuracy requirements.

Ellis, J.↗
NASA NTRS1983

Nuclear track records in the Abee enstatite chondrite

A determination of preatmospheric mass and a delineation of cosmic ray exposure history are made, through the study of nuclear track records in 14 samples taken from different locations of an Abee enstatite chondrite cut slab. Measured track densities in different samples range from 10,000 to 1,000,000/sq cm. Excess tracks of fissiogenic origin were found near the grain edges and across cleavage planes in eight enstatite grains out of the 300 analyzed. The track data rule out preirradiation of any of the analyzed samples with shielding of less than a few tens of cm. The isotrack density contours on the plane of the slab imply an asymmetric ablation of the Abee chondrite during its atmospheric transit. A sphere of about 30 cm radius approximates the preatmospheric shape and size of the Abee meteorite, which underwent a 70% mass loss during ablation.

Goswami, J. N.↗
NASA NTRS1982

Satellite relayed tracking and data acquisition for the 1990's

The Tracking and Data Relay Satellite System (TDRSS) provides near-continuous tracking for low earth-orbiting spacecraft. Increases in data volume projected for the 90's will affect the configuration for data handling in one of two ways. One way involves an increase in the number of satellites in the TDRSS constellation. In connection with the second way, a new tracking and data acquisition satellite system will be developed. The new system will have greater capacity, increased reliability, and a more direct user-to-relay connectivity. The program for developing the ne satellite system of the 1990;s has been defined as Tracking and Data Acquisition System (TDAS). TDAS requirements are considered along with basic TDAS design parameters, TDAS spacecraft architectures, and TDAS constellation options. System and technology considerations are also discussed, taking into account user interface options, operational functions of the TDAS ground elements, and user communication technology.

Schwartz, J. J.↗
NASA NTRS1984

Track damage and erosion of insulators by ion-induced electronic processes

Track damage and the associated ejection of atoms and molecules from insulators, which occur as a result of ion-induced electronic excitation, are of interest both in their own right and because of the mechanisms through which the energy in the excited electrons is transformed into atomic motion. In this paper an overview is given of the phenomena that are observed. We show that there is a remarkable similarity between the damage profile along the ion's track in the solid and the yield of ejected atoms at the energy that corresponds to each point on the track. It is also seen that the density of extended defects (or, correspondingly, the ejected particle yield) appears to have a 'universal' form that is weakly dependent on the type of material. In the model presented this is a consequence of the inner-shell ionization of light elements in the solid by the incident ion; the resulting Auger decay produces an intense ionization spike that locally triggers the track formation/erosion process. This model allows the estimation of erosion yields/damage profiles for different ions and materials.

Tombrello, T. A.↗
NASA NTRS1983

Scintillator-fiber charged particle track-imaging detector

A scintillator-fiber charged-particle track-imaging detector was developed using a bundle of square cross section plastic scintillator fiber optics, proximity focused onto an image intensified charge injection device (CID) camera. The tracks of charged particle penetrating into the scintillator fiber bundle are projected onto the CID camera and the imaging information is read out in video format. The detector was exposed to beams of 15 MeV protons and relativistic Neon, Manganese, and Gold nuclei and images of their tracks were obtained. Details of the detector technique, properties of the tracks obtained, and preliminary range measurements of 15 MeV protons stopping in the fiber bundle are presented.

Binns, W. R.↗
NASA NTRS1984

Design and Performance of Sampled Data Loops for Subcarrier and Carrier Tracking

Design parameters and resulting performance are presented for the sampled data analogies of continuous time phase locked loops of second and third order containing perfect integrators. Expressions for noise equivalent bandwidth and steady state errors are given. Stability and gain margin are investigated using z plane root loci. Finally, an application is presented for Voyager subcarrier and carrier tracking under the dynamics of the encounters with Uranus and Neptune. For carrier tracking, loop bandwidth narrow enough for satisfactory loop signal to noise ratios can be achieved using third order loops without rate aiding, whereas second order loops would require aiding. For subcarrier tracking, third order loops can be used when the sampling rate is limited to approximately once per second, as in the Baseband Assembly, whereas second order loops sufficiently wide to track the dynamics have stability problems at that sampling rate.

Aguirre, S.↗
NASA NTRS1984

Discovery of nuclear tracks in interplanetary dust

Prior to capture by the Earth's atmosphere individual interplanetary dust particles (IDP's) have allegedly spent up to 10 to the 5th power years as discrete bodies within the interplanetary medium. Observation of tracks in IDP's in the form of solar flare tracks would provide hitherto unknown data about micrometeorites such as: (1) whether an IDP existed in space as an individual particle or as part of a larger meteroid; (2) the degree to which a particle was heated during the trauma of atmospheric entry; (3) residence time of an IDP within the interplanetary medium; and (4) possible hints as to the pre-accretional exposure of component mineral grains to solar or galactic irradiation. Using transmission electron microscopy tracks in several micrometeorites have been successfully identified. All of the studied particles had been retrieved from the stratosphere by U-2 aircraft. Three pristine IDP's (between 5 and 15 micro m diameter) have so far been searched for solar flare tracks, and they have been found in the two smaller particles U2-20B11 (11 micro m) and U2-20B37 (8 micro m).

Bradley, J. P.↗