Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thin Section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Investigation of the notch sensitivity of tailorable long fiber discontinuous prepreg composite laminates

Tailorable discontinuous fiber composite laminates provide relative formability beyond that of continuous fiber laminates, while achieving improved mechanical performance over comparable stochastic systems. Here, in this work, the notch sensitivity of engineered prepreg platelet molded composite (PPMC) laminates is investigated using the open-hole tension (OHT) test and compared to available data for stochastic PPMCs and continuous fiber laminates made with the same material. The press-formed thermoplastic composites (AS4/PEKK) were molded with a quasi-isotropic stacking sequence. The discontinuous PPMC laminate was found to be notch insensitive with OHT strengths ranging from 145.4 MPa (CV $=$ 7%) for d/w $=$ 0.5 to 229.3 MPa (CV $=$ 9%) for d/w $=$ 0.25. The highly ordered meso-structure of the engineered PPMC laminate yields comparatively excellent mechanical properties for relatively thin laminates in contrast to stochastic systems. Both net- and gross-section failures were observed for d/w $=$ 0.25, which suggests that the engineered PPMC laminates studied here maintain a degree of inherent, internal stress concentrations that compete with those caused by geometric features such as a circular hole. Computational simulations of the OHT tests with explicitly represented platelets were found to be in good agreement with experimental measurements. The progressive failure analysis was used to conduct a numerical investigation of the stacking sequence and platelet meso-morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

ZrN Phase Formation, Hardening and Nitrogen Diffusion Kinetics in Plasma Nitrided Zircaloy-4

Plasma nitridation was conducted to modify the surfaces of Zircaloy-4. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman analysis were used to characterize microstructures and phases. Surface indentation and cross-sectional indentation were performed to evaluate mechanical property changes. Nitridation forms a thin layer of ZrN phase, followed by a much deeper layer affected by nitrogen diffusion. The ZrN phase is confirmed by both TEM and Raman characterization. The Raman peaks of ZrN phase show a temperature dependence. The intensity increases with increasing nitridation temperatures, reaches a maximum at 700 °C, and then decreases at higher temperatures. The ZrN layer appears as continuous small columnar grains. The surface polycrystalline ZrN phase is harder than the bulk by a factor of ~8, and the nitrogen diffusion layer is harder by a factor of ~2–5. The activation energy of nitrogen diffusion was measured to be 2.88 eV. The thickness of the nitrogen-hardened layer is controllable by changing the nitridation temperature and duration.

36 MATERIALS SCIENCE↗
NASA NTRS1992

The derivation of parent electron spectra from bremsstrahlung hard X-ray spectra

A numerical method is formulated to derive the spectrum of the parent electrons from the hard X-ray spectrum produced in optically thin bremsstrahlung. The method can utilize any form for the bremsstrahlung cross sections, and it provides accurate estimates of uncertainties in the derived electron spectrum based on uncertainties in the photon measurements. This method is applied to test photon spectra, as well as to hard X-ray spectra of the June 27, 1980 solar flare which was observed by high spectral resolution detectors. Future measurements with much more sensitive detectors will enable this method to be used to derive detailed, accurate flare electron spectra.

Johns, Christopher M.↗
DOE OSTI2023

Study of the structure, structural transition, interface model, and magnetic moments of CrN grown on MgO(001) by molecular beam epitaxy

Structural phase transition is studied in high quality CrN thin films grown by molecular beam epitaxy on MgO(001) substrates. Cross-sectional transmission electron microscopy and x-ray diffraction reveal that the epitaxial relationship between CrN film and MgO substrate is [100] CrN /[100] MgO , [110] CrN /[110] MgO , and [001] CrN /[001] MgO . The films show tensile strain/compression at the CrN/MgO(001) interface, which relaxes gradually with the film growth. Temperature dependent x-ray diffraction measurements show a first-order structural phase transition. In addition to the experimental measurements, first-principles theoretical calculations have been carried out for finding a stable model for the CrN/MgO interface. Furthermore, these calculations determine two possible models for the interface, where a monolayer of chromium oxide is formed between the CrN and MgO layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Coplanar waveguide microwave filter of YBa2Cu3O7

Thin film low-pass microwave filters have been made with laser-ablated YBa2Cu3O(7-delta) (YBCO) deposited on LaAlO3 substrates, using a coplanar waveguide structure. The coplanar waveguide sections had dimensions suited for integrated circuits. Measured losses in liquid nitrogen were superior to the loss in a similar thin-film copper filter throughout the 0 to 9.5 GHz pass-band. A simple transmission-line model is adequate for filter design using YBCO films with repeatable characteristics. The measured filters demonstrate the performance of fully patterned YBCO after sealing in space-qualifiable hermetic packages. Five packaged filters of this design were delivered to the Naval Research Laboratory as candidates for space flight in the High Temperature Superconductivity Space Experiment.

Chew, Wilbert↗
NASA NTRS1976

Cross sections for He and Ne isotopes in natural Mg, Al, and Si, He isotopes in CaF2, Ar isotopes in natural Ca, and radionuclides in natural Al, Si, Ti, Cr, and stainless steel induced by 12- to 45-MeV protons

Stacks of thin Mg, Al, Si, Ca, CaF2, Ti, and stainless steel foils were bombarded in twelve irradiations by a variable energy cyclotron. Cross sections are reported for He and Ne in natural Mg, Al, and Si, and for He in CaF2, and for Ar in natural Ca, as determined from mass spectrometer analysis of the inert gases. In addition, cross sections of Na-22 in natural Al and Si, of V-48 in natural Ti, and of Cr-51, Mn-52, and Co-57 in stainless steel are reported. From these were deduced Cr-51 and Mn-52 cross sections in natural Cr.

Walton, J. R.↗
DOE OSTI2025

A Robust Data-Driven Approach for Mechanical Serial Sectioning

Mechanical serial sectioning (MSS) provides detailed microstructural information across large length scales. By repeatedly removing thin layers of material and imaging the exposed surface, a 3D representation of a specimen’s internal structure can be constructed, enabling failure analysis and feature identification that are otherwise inaccessible via conventional 2D or nondestructive evaluation techniques. Achieving consistent and accurate material removal can be challenging due to system variability, requiring an experienced operator to manually adjust parameters, prolonging data collection times and necessitating post-processing routines to standardize the data. Here, to address these challenges, this paper presents the employment of a one-step model predictive control (MPC) framework tailored to a run-to-run (R2R) controller. The R2R-MPC controller automates the parameter selection process, improving the consistency of material removal through iterative feedback for disturbance rejection and accurate tracking of the target removal rate. Using a data-driven approach, the controller robustly adapts to changing material characteristics. The effectiveness of the R2R-MPC controller is demonstrated through simulation and experimental results and compared to previous data collection procedures.

3D Materials Science↗
NASA NTRS1998

Polarization Considerations

As light passes through a optical system the reflections and refractions will in general change the polarization state of the light. If we assume that all of the materials in the thin film coatings and substrate are isotropic and homogeneous then calculating the amount of "instrumental" polarization is a relatively straight forward task. In the following sections we will present a of the steps required to perform a 'polarization ray trace' calculation for a single ray and monochromatic and hence polarized light. The thin film portion of the calculation is also shown. The reason for explicitly showing the thin film equations is that there are sign conventions imposed on the boundary value equations by the orientation and handedness of the various coordinate frames which are attached to the geometric rays. The attenuation of light through a optical system, is relatively simple, and requires at the very least a lens (average) reflectivity or transmissivity. Determining the polarization sensitivity of a optical system is still relatively straight forward requiring at least a knowledge of the behavior of the "s" and "p" components at each interface for the chief ray. Determining the thin film induced aberrations of a optical system are somewhat more demanding. Questions about the arithmetic sign of the phase factors and how this relates to the overall "OPD" of a ray are ubiquitous. Many rays are required to construct a wavefront. Thin film codes which modify the OPD's of rays are a requirement for this last mentioned computation. This requires a consistent scheme of coordinate frames and sign conventions and is probably the most demanding task of a polarization ray trace. Only the electric field will used in the discussion. This is not a restriction as the Stokes parameters are functions of the electric field. The following does not attempt to explain, but only to present all of the required concepts and formulas.

Waluschka, Eugene↗
NASA NTRS1984

The radar cross section of dielectric disks

A solution is presented for the backscatter (monostatic) radar cross section of dielectric disks of arbitrary shape, thickness, and dielectric constant. The result is obtained by employing a Kirchhoff-type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner will be shown to agree with known results in the special cases of normal incidence, thin disks, and perfect conductivity. It will also be shown that the solution can be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff-type approximation without additional assumptions.

Radar cross section↗
DOE OSTI2024

Influence of Antarctic and Greenland Continental Shelf Circulation on High‐Latitude Oceans in E3SM

The science objectives of this project are to simulate and understand the impacts of both deep-basin warm-water intrusions and land-ice melt on the continental shelf circulations and sea-ice distributions around the margins of Greenland and Antarctica. As well, the role of subsurface ocean heat from the Atlantic on declining sea-ice cover in the Arctic is explored. Mesoscale processes and fine bathymetry are implicated in cross-shelf property transports around both Greenland and Antarctica. Therefore, we configured and ran an atmospheric reanalysis-forced global ocean/sea-ice simulation on a grid that reduces from 8 km at the Equator to 2 km at the poles (UH8to2) with 60 vertical levels. It was produced using the Energy Exascale Earth System Model ‘‘HiLAT’’ code (E3SMv0-HiLAT) that uses the Parallel Ocean Program (POP) and CICE5 as its ocean and sea-ice components, respectively. Two main UH8to2 simulations were carried out: one for 1975-2009 and the other for July 2016-2020 after it was initialized from a 1/25° data-assimilative ocean/sea-ice prediction system ocean/sea-ice state. The UH8to2 is not coupled to an active land-ice model. Rather, land-ice melt is represented by observationally informed freshwater fluxes (FWFs). Short (multi-year) UH8to2 simulations were conducted to understand sensitivities when Greenland ice sheet (GrIS) melt is released only at the ocean surface or when it is distributed over the upper water column in accordance with fjord melt plume behavior; these cases were compared with a no GrIS melt case. West Greenland continental shelf currents were fastest in the vertical distribution case and an increase in baroclinic conversion at the shelf break associated with increased eddy kinetic energy was found relative to the surface release case. Further, salinity is lower and meltwater volume greater in the eastern Labrador Sea in the vertical distribution case. For the Arctic, the veracity of the UH8to2 was evaluated for 2017-2020 using available observations. Simulated seasonal sea-ice thickness and concentration are realistic, but the ice is unrealistically thin in the central and eastern Arctic in the fall. Comparisons of vertical sections of ocean temperature, salinity, and buoyancy collected from Ice-Tethered Profilers (ITPs) in the eastern Arctic in the fall and winter of 2019/2020 and co-located/concurrent UH8to2 fields show the stratification over the top 100 m of the water column is too low in the model, the simulated mixed layer too deep, and the simulated subsurface Atlantic Water (AW) too warm; these biases may contribute to the sea-ice biases. A model intercomparison study using the UH8to2 and a forced 1/25° regional Arctic ocean/sea-ice (uses the HYbrid Coordinate Ocean Model and CICE5) simulation further investigates the relationship between AW and sea-ice in the eastern Arctic. The models show a mesoscale-rich pulse of Atlantic Water extending into the eastern basin that reaches maximum intensity in late winter of 2018, after which it decreases in strength. Concurrent and co-located sea-ice melt or the inhibition of sea-ice growth is seen and is attributed to halocline mesoscale eddies doming into the mixed layer with convection bringing this heat into the vicinity of the sea-ice.

58 GEOSCIENCES↗
NASA NTRS1986

Fabrication of an X-Ray Imaging Detector

X-ray detector array yields mosaic image of object emitting 1- to 30-keV range fabricated from n-doped silicon wafer. In proposed fabrication technique, thin walls of diffused n+ dopant divide wafer into pixels of rectangular cross section, each containing central electrode of thermally migrated p-type metal. This pnn+ arrangement reduces leakage current by preventing transistor action caused by pnp structure of earlier version.

Alcorn, G. E.↗
NASA NTRS1984

Biaxial fatigue properties of thin-walled composite tubes

A testing method for obtaining fatigue and fracture data under biaxial loading and for negative R-ratios is described. Thin-walled tubes of 1-in. outer nominal diameter with a tapered grip section were tested in an Axial-Torsion Servohydraulic Testing Machine with a 463 Data Control Processor at frequencies below 10 Hz up to the 1-million cycle range. Room temperature, uniaxial constant amplitude fatigue data for high temperature cure graphite-epoxy material are presented at R = -0.4 for a (+, - 5 deg) fiber orientation. The fatigue curve is almost horizontal. Tests on (+, - 5 deg) 'SP-328' resulted in failures which predominantly originated in the grip section. Presently, a new specimen design is being tested intended to eliminate cracking in the grip section. Biaxial in-phase loading of (0/+, - 45) tubes of Fiberite graphite-epoxy resulted in much steeper fatigue curves than observed under uniaxial loading.

Krempl, E.↗
NASA NTRS1986

Drag reducing outer-layer devices in rough wall turbulent boundary layers

The ability of outer-layer devices to reduce wall shear stress over a substantial streamwise distance in rough-wall turbulent boundary layers has been studied experimentally. The devices examined are a pair of thin flat ribbons placed in tandem as well as those having symmetric airfoil sections. The wall conditions examined are smooth, d- and k-type transverse-groove and sandgrain roughnesses. The wall drag is found to be reduced from the respective normal levels in all rough walls. All k-type rough walls exhibit a similar level of relative wall drag reduction which is also smaller than that in a smooth-wall. The d-type rough walls exhibit a transitional behaviour - the relative wall drag reduction drops from the smooth wall level to that of the k-type roughness with increasing roughness Reynolds number. However, the absolute reductions in the local wall shear stress are similar in both the rough and smooth walls. On the other hand, the relative reductions are lower in the rough walls because of a higher reference drag which is caused by the unique presence of a pressure component on which the devices are not as effective.

Bandyopadhyay, P. R.↗
NASA NTRS1986

The structure of a cometary type I tail - Ground-based and ICE observations of P/Giacobini-Zinner

Comparison of ground-based and in situ observations of P/Giacobini-Zinner are used to investigate the morphology of a type I cometary tail. ICE magnetic field and plasma measurements show a well-defined cometary magnetotail composed of two magnetic lobes in pressure equilibrium with a central plasma sheet. A dependence of ion tail width on IMF direction is found which strongly suggests that the classical type I ion tails observed on the ground consist predominantly of emissions from the slab-shaped plasma sheet separating the magnetic lobes. The width of the G-Z magnetotail is determined to be 9.8 (+ or - 0.5) x 10 to the 3rd km with a quasi-circular cross section. The results of this study also indicate that some of the dynamical thinnings and thickenings observed in long type I tails may be caused by IMF variations changing the angle with which the plasma sheet is viewed at earth.

Slavin, J. A.↗
NASA NTRS1991

FDTD modeling of thin impedance sheets

Thin sheets of resistive or dielectric material are commonly encountered in radar cross section calculations. Analysis of such sheets is simplified by using sheet impedances. In this paper it is shown that sheet impedances can be modeled easily and accurately using Finite Difference Time Domain (FDTD) methods.

Luebbers, Raymond J.↗
NASA NTRS1991

FDTD modeling of thin impedance sheets

Thin sheets of resistive or dielectric material are commonly encountered in radar cross section calculations. Analysis of such sheets is simplified by using sheet impedances. It is shown that sheet impedances can be modeled easily and accurately using Finite Difference Time Domain (FDTD) methods. These sheets are characterized by a discontinuity in the tangential magnetic field on either side of the sheet but no discontinuity in tangential electric field. This continuity, or single valued behavior of the electric field, allows the sheet current to be expressed in terms of an impedance multiplying this electric field.

Luebbers, Raymond↗
NASA NTRS2011

FE-SEM, FIB and TEM Study of Surface Deposits of Apollo 15 Green Glass Volcanic Spherules

Surface deposits on lunar pyroclastic green (Apollo 15) and orange (Apollo 17) glass spherules have been attributed to condensation from the gas clouds that accompanied fire-fountain eruptions. The fire fountains cast molten lava high above the lunar surface and the silicate melt droplets quenched before landing producing the glass beads. Early investigations showed that these deposits are rich in sulfur and zinc. The deposits are extremely fine-grained and thin, so that it was never possible to determine their chemical compositions cleanly by SEM/EDX or electron probe x-ray analysis because most of the excited volume was in the under-lying silicate glass. We are investigating the surface deposits by TEM, using focused ion beam (FIB) microscopy to extract and thin the surface deposits. Here we report on chemical mapping of a FIB section of surface deposits of an Apollo green glass bead 15401using the ultra-high resolution JEOL 2500 STEM located at NASA Johnson Space Center.

Ross, Daniel K.↗