Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TWIST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

The spontaneous concentration of magnetic field in the photosphere of the sun

The basic physics of magnetic flux tubes in the solar photosphere is reviewed, with areas still open to conjecture pointed out. The question of the concentration of individual small flux tubes to levels of 1-2 kilogauss, when the average solar surface magnetic field is on the order of 10 gauss, by processes of twisting and the formation of flux ropes made up of tubes wound around each other is considered together with the effects of turbulence on the flux tube. Mechanisms for tube compression by the evacuation of the gas contained within a flux tube are then examined, and the possibility of field concentration through the cooling of the gas within the tube in a superadiabatic process is suggested. Attention is then given to possible mechanisms serving to maintain the concentration of flux tubes far below the surface of the sun which gives rise to sunspots and pores as the flux tree emerges through the surface.

Parker, E. N.↗
NASA NTRS1981

General purpose research rotor

An analytical study, under a NASA contract, is performed on an advanced flight research rotor (four-bladed, 54 ft in diameter, with bearingless rotor retention characteristics) to determine the sensitivity of total rotor characteristics such as vibratory hub loads, rotor horsepower, and blade loads, to parametric variability of the rotor configuration. The sensitivity of the rotor to various combinations of blade planform taper, percent of blade span that is tapered, tip sweep angle, built-in-twist, and torsional frequency is determined for specific configurations by randomly selecting combinations of these parameters. Characteristics of other intermediate rotor configurations are determined by a regression analysis. The results show that a wide range of rotor total performance characteristics can be obtained for a rotor trimmed to the same flight conditions. The regression equations predict total performance of the rotor very well and appear to be a useful analytical tool for rotor design optimization. Figures showing the results of the various tests are given along with a table of the regression coefficients.

Jones, R.↗
NASA NTRS1982

An evaluation of vertical drag and ground effect using the RSRA rotor balance system

A flight test program utilizing the Rotor Systems Research Aircraft (RSRA) main rotor balance system was conducted to obtain data for the helicopter configuration. The test program is discussed along with the employed data reduction methods, and the results. NASA 740, the RSRA used for the vertical drag test, was in the standard helicopter configuration. The 31-foot radius blades have a linear twist of eight degrees and NACA 0012 airfoil sections. Aspects of instrumentation are considered, taking into account the data recording system, the static calibration facility, and aspects of data calibration and processing. Attention is given to the test procedure, data analysis methods, balance measurements, the ground effect, and vertical drag. It is found that the RSRA rotor balance system is capable of providing high quality performance data. The vertical drag of the RSRA is 4%, compared to 2.9% predicted.

Flemming, R. J.↗
NASA NTRS1983

Wing Subsonic Aerodynamic Performance Estimates

Solution by iteration estimates performance of twisted and cambered wings of arbitrary planform. SUBAER based on linearized theory lifting-surface solution provides spanwise distribution of theoretical leading edge thrust, in addition to surface distribution of perturbation velocities. Program written in FORTRAN IV.

Carlson, H. W.↗
NASA NTRS1983

Fracture Strength of Silicon Solar Cells

Tests during processing show way to reduce breakage and increase yield. Silicon wafer twisted by four equally spaced dowel pins, two pushing up and two pushing down. Uniform shear stress found along line 45 degrees from axes of two load pairs. Test helping to develop reliable information on nature and source of flows causing cell fracture.

Chen, C. P.↗
NASA NTRS1984

Decoupling a Reflecting Layer From Its Support Structure

Mounting decouples thermal distortions of reflective surface so not transmitted to support structure. Reflecting layer consists of aluminum reflecting tiles attached to support structure by flexural mounting bend and twist to accommodate thermal expansion of tiles. Technique useful in microwave-antenna reflectors.

Bamford, R. M.↗
NASA NTRS1984

Preventing Motor Damage Due to Rapid Reversal

Reversal switch takes more time to operate, allows gentler deceleration before reversal. Switch requires both twisting and pulling motion, giving motor time to decelerate gradually.

Fetters, R.↗
NASA NTRS1982

Free yaw performance of the Mod-0 large horizontal axis 100 kW wind turbine

The NASA Mod-0 Large Horizontal Axis 100 kW Wind Turbine was operated in free yaw with an unconed teetered, downwind rotor mounted on a nacelle having 8-1/2 deg tilt. Two series of tests were run, the first series with 19 meter twisted aluminum blades and the second series with 19 meter untwisted steel spar blades with tip control. Rotor speed were nominally 20, 26 and 31 rpm. It was found the nacelle stabilized in free yaw at a yaw angle of between -55 deg to -45 deg was relatively independent of wind speed and was well damped to short term variations in wind direction. Power output of the wind turbine in free yaw, aligned at a large yaw angle, was considerably less than that if the wind turbine were aligned with the wind. For the Mod-0 wind turbine at 26 rpm, the MOSTAB computer code calculations of the free yaw alignment angle and power output compare reasonably well with experimental data. MOSTAB calculations indicate that elimination of tilt and adding coning will improve wind turbine alignment with the wind and that wind shear has a slight detrimental effect on the free yaw alignment angle.

Corrigan, R. D.↗
NASA NTRS1982

Fiberglass Composite Blades for the 4 MW - WTS-4 Wind Turbine

The design and fabrication of composite blades for the WTS-4, a four-megawatt horizontal-axis wind turbine, is discussed. The blade consists of a two-cell, monolithic structure of filament-wound, fiberglass/epoxy composite. Filament winding is a low-cost process which can produce a blade with an aerodynamically efficient airfoil and planform with nonlinear twist to achieve high performance in terms of energy capture. Its retention provides a redundant attachment for long, durable life and safety. Advanced tooling concepts and as sophisticated computer control is used to achieve the unique filament-wound shape.

Bussolari, R. J.↗
NASA NTRS1983

Airfoil shape and thickness effects on transonic airloads and flutter

A transient pulse technique is used to obtain harmonic forces from a time-marching solution of the complete unsteady transonic small perturbation potential equation. The unsteady pressures and forces acting on a model of the NACA 64A010 conventional airfoil and the MBB A-3 supercritical airfoil over a range of Mach numbers are examined in detail. Flutter calculations at constant angle of attack show a similar flutter behavior for both airfoils, except for a boundary shift in Mach number associated with corresponding Mach number shift in the unsteady aerodynamic forces. Differences in the static aeroelastic twist behavior for the two airfoils are significant.

Bland, S. R.↗
NASA NTRS1983

Design and fabrication of conventional and unconventional superconductors

The design and fabrication of conventional and unconventionally processed Ti-Nb base and Al5-compound-base, respectively, composite superconductors is discussed in a nine section review. The first two sections introduce the general properties of alloy and compound superconductors, and the design and processing requirements for the production of long lengths of stable low loss conductor. All aspects of flux jump stability, and the general requirements of cryogenic stabilization are addressed. Conductor design from an a.c.-loss standpoint; some basic formulae describing hysteretic and eddy current losses and the influences on a.c. loss of filament diameter, strand (conductor) diameter, twist pitch, and matrix resistivity are discussed. The basic techniques used in the fabrication of conventional multifilamentary conductors are described.

Collings, E. W.↗
NASA NTRS1983

Experimental study of main rotor/tail rotor/airframe interactions in hover. Volume 1: Text and figures

To assist in identifying and quantifying the relevant parameters associated with the complex topic of main rotor/fuselage/tail rotor interference, a model scale hover test was conducted in the Model Rotor Hover Facility. The test was conducted using the basic model test rig, fuselage skins to represent a UH-60A BLACK HAWK helicopter, 4 sets of rotor blades of varying geometry (i.e., twist, airfoils and solidity) and a model tail rotor that could be relocated to give changes in rotor clearance (axially, laterally, and vertically), can't angle and operating model (pusher or tractor). The description of the models and the tests, data analysis and summary (including plots) are included. The customary system of units gas used for principal measurements and calculations. Expressions in both SI units and customary units are used with the SI units stated first and the customary units afterwords, in parenthesis.

Balch, D. T.↗
NASA NTRS1983

Orbiting chains and rings

Two very different, highly flexible, space structures proposed during the last decade which involve analytical solution of certain partial differential equations are discussed. The first structure is an array, or hanging chain of aluminum beads which would serve as a convenient communicator if, under the influence of the Earth's gravity gradient, it assumes a local vertical orientation as it circles the Earth. Two passive schemes have been proposed for damping the rigid modes: twist the wire at the ends to provide non-zero moment of inertia about the vertical, thereby inducing relative motion of the two tips during rigid pitch or roll, and thus exercising a damper; and introduce weak lossy springs between the end sections and the main section; thereby providing linear coupling between the springs and all the in-plane (pitch) modes. The second structure is a complete ring of satellites cabled together at synchronous altitude. By a slight increase in altitude, the cable is in tension. This configuration is, however, unstable, and an active feedback control scheme is required to stabilize it. A possible scheme involves local cable length adjustment based on measurement of local altitude and shape variations and their rates.

Breakwell, J. V.↗
NASA NTRS1983

Global characteristics of magnetic flux ropes in the Venus ionosphere

An examination is undertaken of global characteristics of Venus ionosphere magnetic flux ropes, whose maximum spatial occurrence at 165-km altitude occupies more than half of the ionospheric volume. Ropes above 200 km altitude in the low zenith angle regions appear to have quasi-horizontal orientations, while those below that altitude tend to be quasi-vertical. High zenith angle cases tend to be horizontal above 300 km, and randomly oriented below that altitude. Ropes may be more tightly 'twisted' at low than at high altitudes, especially in the low zenith angle regions. Rope field strengths are highest near the altitudes where their occurrence is greatest, and scale with the square root of the ambient thermal pressure. The global polarities of flux rope field-aligned currents seem to be random and do not support a steady, nonturbulent global formation mechanism.

Elphic, R. C.↗
NASA NTRS1983

Airfoil shape and thickness effects on transonic airloads and flutter

A transient pulse technique is used to obtain harmonic forces from a time-marching solution of the complete unsteady transonic small perturbation potential evaluation. The unsteady pressures and forces acting on a model of the NACA 64A010 conventional airfoil and the MBB A-3 supercritical airfoil over a range of Mach numbers are examined in detail. Flutter calculations at constant angle of attack show a similar flutter behavior for both airfoils, except for a boundary shift in Mach number associated with a corresponding Mach number shift in the unsteady aerodynamic forces. Differences in the static aeroelastic twist behavior for the two airfoils are significant.

Bland, S. R.↗
NASA NTRS1983

The hydrodynamics of magnetic nonequilibrium

Because the dynamical nonequilibrium of closely packed twisted flux tubes is essentially the problem of two-dimensional MHD turbulence, the extensive literature on two-dimensional turbulence represents the hydrodynamics of magnetic nonequilibrium. Many features of the turbulence can conversely be understood as a consequence of the dynamical nonequilibrium. Attention is presently given to the dynamics of the strong fluid jets, issuing from reconnection points, that are exhibited by numerical simulations of two-dimensional turbulence. Simple examples are given which show that the uniformity of jet width observed is a consequence of the form of the pressure of the magnetic fields between which the jets are confined. The general hydrodynamics of a layer of fluid confined by steady pressures is reducible to a quadrature, so that a variety of effects may be considered, including gravitation. The dissipation of the solar corona is discussed.

Parker, E. N.↗
NASA NTRS1982

An experience in mesh generation for three-dimensional calculation of potential flow around a rotating propeller

An attempt is made to develop a three-dimensional, finite volume computational code for highly swept, twisted, small aspect ratio propeller blades with supersonic tip speeds, in a way that accounts for cascade effects, hub-induced flow, and nonlinear transonic effects. Attention is presently given to the generation of a computational mesh for such a complex propeller configuration, with the aim of sharing developmental process experience. The problem treated is unique, in that blade chord, blade length, hub length and blade-to-blade distance represent several characteristic length scales among which there is considerable disparity. An ad hoc mesh-generation scheme is accordingly developed.

Jou, W.-H.↗
NASA NTRS1983

A vortex venturi for reverting antimisting fuel properties

The level of degradation of antimisting fuel polymers such as FM-9 which must be accomplished in order to use antimisting fuel in existing engines may require the use of cavitation. The hydrodynamic shear produced by the collapse of vapor bubbles is capable of producing more splitting of polymeric molecules than mechanically-induced shear. A program has been carried out to investigate the possibility of using a cavitating venturi with rotating flow as a fuel reverter. This investigation included the effects of a swirl-inducing twisted tape upstream of the throat, inlet pressure, recovery pressure ratio and a pintle for varying throat area. A correlation of the data was produced, system concepts for using the vortex venturi were investigated and problem areas were delineated.

Szetela, E. J.↗