SEARCH · Engineering Papers

Results for “TUNNEL EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Digital Technologies at NASA for Science and Engineering

While scientific and engineering advancements used to rely primarily on theoretical studies and physical experiments, today digital technology enabled by petaflops-scale supercomputers is an equal, if not a greater, contributor to such achievements. In addition, computational modeling and simulation serves as a predictive tool that is not otherwise available. As a result, the use of high performance computing is integral to NASA's work in all mission areas such as space exploration, aeronautics, and scientific discovery. But traditional supercomputing alone is not sufficient for all of the space agency's needs. The success of many NASA missions depends on solving complex computing challenges, some of which are NP-hard (decision theory) if using classical solution methods. Quantum computing promises an unprecedented ability to solve such intractable problems by harnessing quantum mechanical effects such as tunneling, superposition, and entanglement. Another disruptive digital technology is neuromorphic computing that uses brain-inspired lessons to generate new architectures that are much more energy efficient, and capable of massive parallel processing and learning in-situ. Finally, with large amounts of observational and computational data sets, the opportunities of big data and data analytics can be leveraged to enable deep learning and knowledge discovery - it's all a massive digital transformation. This talk will be an overview how NASA utilizes digital technologies for its science and engineering efforts.

Biswas, Rupak↗

NASA NTRS2019

Scale–Resolving Simulations of a Fundamental Trailing–Edge Cooling Slot Using a Discontinuous–Galerkin Spectral–Element Method

The accurate prediction of turbulent mixing in high-pressure turbines that incorporate various airfoil surface-cooling strategies is becoming increasing critical to the design of modern gas turbine engines where the quest for improved efficiency is driving compressor overall pressure ratios and turbine inlet temperatures to much higher levels than ever before. In the present paper, a recently developed computational capability for accurate and efficient scale–resolving simulations of turbomachinery is extended to study the turbulent mixing mechanism of a simplified abstraction of an airfoil trailing-edge cooling slot - a plane wall jet with finite lip thickness discharging into an ambient flow. The computational capability is based on an entropy– stable, discontinuous–Galerkin approach that extends to arbitrarily high orders of spatial and temporal accuracy. The numerical results show that the present simulations capture the trends observed in the experiments. Discrepancies between the simulations and experiments are believed to be due to differences in the inflow profiles and tunnel side–wall effects. The thick lip configuration leads to a thicker wake and higher unsteadiness in the wall jet compared to the thin lip. A detailed comparison of the turbulent flowfields is presented to highlight differences arising due to lip thickness variations.

Scale Resolving↗

NASA NTRS2018

Large-Eddy Simulation of Axisymmetric Compression Corner Flow

The Wall-Modeled Large Eddy Simulation (WMLES) approach is used to study the interaction of a shock wave with a high Reynolds number turbulent boundary layer. Since the near wall region is modeled, high Reynolds number turbulent flows can be simulated at a moderate computational cost. The case considered is that of an axisymmetric Mach 2.85 turbulent boundary layer over a 30 compression corner. The Reynolds number of the boundary layer upstream of the interaction based on momentum thickness (Re theta = u sub infinity theta/v sub infinity) is ~12,000. The geometry and flow conditions match the experiments of Dunagan et al. (NASA TM 88227, 1986). The simulations were performed using equilibrium and non-equilibrium wall models. The agreement with experiment is encouraging for the finest grid with respect to the separation bubble length, unsteady shock structure and wall pressure distribution. Sensitivity ofWMLES results to grid, wall model, and blockage effects in the tunnel are reported.

Iyer, Prahladh S.↗

NASA NTRSDate not supplied

Wall-modeled LES of the NASA Juncture Flow Experiment

We perform wall-modeled large eddy simulation (WMLES) of the NASA Juncture Flow experiment (Kegerise & Neuhart, NASA/TM–2019–20286) using an equilibrium wall model and unstructured finite volume solver, to assess its predictive ability for complex geometries. The flow condition simulated corresponds to 5 degrees angle of attack with a freestream Mach number of 0.189, and a Reynolds number based on the mean crank chord of 2.4 million. All simulations neglect the effects of wind tunnel walls, sting and mast present in the experiment. To assess the performance of WMLES on simpler flows with very coarse grids, we simulate flow in a turbulent channel at a friction Reynolds number, Reτ≈2000, and flow through a square duct at anReτ≈1000. The duct flow results using the equilibrium wall model indicate that the skin friction is inaccurate near the corner for grid topologies and resolutions typically used in WMLES, having implications for more complicated flows such as the juncture flow. For the juncture flow simulation, two different approaches are investigated. The first approach consists of a truncated-domain simulation wherein the inflow plane of the computational domain is placed at≈0.2chord length of the wing, and we prescribe the mean flow from a separate Reynolds-averaged Navier-Stokes (RANS) solution along with synthetic turbulence to initiate realistic unsteadiness in the domain. The second approach involves simulating the entire geometry with trips to trigger transition to turbulence. The truncated- and full-domain simulations contain about 62 and 90 million cells, respectively; with 8-10 points per boundary layer thickness in the wall-parallel directions, 14-20 points in the wall-normal direction and a near-wall viscous spacing (∆n+1) of≈100. Preliminary results are encouraging overall in terms of the prediction of wall pressure, wall skin friction, velocity and stresses; but indicate that further work is required to improve the predictions in the separation bubble and wing-fuselage corner regions. The grid resolution used in this study is still fairly coarse, and the results should be interpreted as work in progress.

Prahladh S Iyer↗

NASA NTRSDate not supplied

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. Ice shape geometries on a full-chord length and hybrid versions of the swept CRM65 wing model were obtained in NASA Icing Research Tunnel and compared. For most test conditions, the overall size and shape of the ice shapes compared well. On the main part of the ice shape, the hybrid model had larger chordwise extent, resulting in wider ice shape. For the scallop ice shapes, the ice shape heights at attachment line location were identical. For conditions that produced rime shape, hybrid model ice shapes were larger overall, even at the attachment line location. The only location where there was more ice on the full chord model was on the lower surface, downstream of where the hybrid model no longer had full-scale leading edge. For the test conditions where ice mass measurements were acquired for both models, the full-chord models had 11-22% less ice mass than on the hybrid wing. These differences were larger and opposite of those predicted from LEWICE 3D ice prediction calculations. Further investigation is needed in order determine the cause of the differences between the full-chord and hybrid models.

Icing↗

NASA NTRSDate not supplied

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

Icing↗

NASA NTRSDate not supplied

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in the NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel spray nozzle configuration and calibration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

NASA NTRSDate not supplied

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel configuration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

NASA NTRS1974

A wind-tunnel investigation of parameters affecting helicopter directional control at low speeds in ground effect

An investigation was conducted in the Langley full-scale tunnel to measure the performance of several helicopter tail-rotor/fin configurations with regard to directional control problems encountered at low speeds in ground effect. Tests were conducted at wind azimuths of 0 deg to 360 deg in increments of 30 deg and 60 deg and at wind speeds from 0 to 35 knots. The results indicate that at certain combinations of wind speed and wind azimuth, large increases in adverse fin force require correspondingly large increases in the tail-rotor thrust, collective pitch, and power required to maintain yaw trim. Changing the tail-rotor direction of rotation to top blade aft for either a pusher tail rotor (tail-rotor wake blowing away from fin) or a tractor tail rotor (tail-rotor wake blowing against fin) will alleviate this problem. For a pusher tail rotor at 180 deg wind azimuth, increases in the fin/tail-rotor gap were not found to have any significant influence on the overall vehicle directional control capability. Changing the tail rotor to a higher position was found to improve tail-rotor performance for a fin-off configuration at a wind azimuth of 180 deg. A V-tail configuration with a pusher tail rotor with top blade aft direction of rotation was found to be the best configuration with regard to overall directional control capability.

Yeager, W. T., Jr.↗

NASA NTRS1987

Integration effects of pylon geometry and rearward mounted nacelles for a high-wing transport

Results of a wind-tunnel study of the effect of pylon cross-sectional shape and tow angle on airplane drag and an aft-mounted nacelle are presented. The 1/24-scale wide-body high-wing transport model was tested in the Langley 16-Foot Transonic Tunnel at free-stream Mach 0.7-0.8 and angles of attack from -3 to 4 degrees. A compression-type pylon is found to have the lowest drag at both Mach 0.7 and 0.8 and to be capable of suppressing the velocities in the inboard region of the pylon-wing junction, reducing the extent of supersonic flow and the probability of flow separation. It is also shown that the D-shaped aft-mounted nacelle has a low interference drag, as do previously tested circular nacelles in the same position.

Carlson, John R.↗

NASA NTRS1979

Onset of condensation effects as detected by total pressure probes in the Langley 0.3-meter transonic cryogenic tunnel

Total pressure probes mounted in the test section of a 0.3 meter transonic cryogenic tunnel were used to detect the onset of condensation effects for free stream Mach numbers of 0.50, 0.75, 0.85, and 0.95 and for total pressure between one and five atmospheres. The amount of supercooling was found to be about 3 K and suggests that condensation was occurring on pre-existing liquid nitrogen droplets resulting from incomplete evaporation of the liquid nitrogen injected to cool the tunnel. The liquid nitrogen injection process presently being used for the 0.3 m tunnel was found to result in a wide spectrum of droplet sizes being injected into the flow. Since the relatively larger droplets took much more time to evaporate than the more numerous smaller droplets, the larger ones reached the test section first as the tunnel operating temperature was reduced. However, condensation effects in the test section were not immediately measurable because there was not a sufficient number of the larger droplets to have an influence on the thermodynamics of the flow.

Hall, R. M.↗

NASA NTRS1975

The effect of Reynolds number on boattail drag

An investigation has been conducted in the Langley pilot transonic cryogenic tunnel to determine the effects of varying Reynolds number on boattail drag at subsonic speeds. Six boattailed cone-cylinder nacelle models were tested with the jet exhaust simulated by a cylindrical sting. Reynolds number was varied from about 2.6 million to 132 million by changing model length and unit Reynolds number. Boattail pressure coefficient distributions show that increasing Reynolds number tends to make the pressure coefficients in the expansion region more negative and the pressure coefficients in the recompression region more positive. These two effects were compensating and as a result there was little or no effect of Reynolds number on the pressure drag of the isolated boattails.

Reubush, D. E.↗

NASA NTRS1977

Mean Velocity, Turbulence Intensity and Turbulence Convection Velocity Measurements for a Convergent Nozzle in a Free Jet Wind Tunnel. Comprehensive Data Report

The effect of flight on the mean flow and turbulence properties of a 0.056m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. This report contains the raw data and graphical presentations. The final technical report includes a description of the test facilities, test hardware, along with significant test results and conclusions.

Mccolgan, C. J.↗

NASA NTRS2015

Reducing the Effect of Transducer Mount Induced Noise on Aeroacoustic Wind Tunnel Testing Data with a New Transducer Mount Design

Characterization of launch vehicle unsteady aerodynamics is a field best studied through experimentation, which is often carried out in the form of large scale wind tunnel testing. Measurement of the fluctuating pressures induced by the boundary layer noise is customarily made with miniature pressure transducers installed into a model of the vehicle of interest. Literature shows that noise level increases between two to five decibels (dB referenced to 20 micropascal) can be induced when the transducer surface is not mounted perfectly flush with the model outer surface. To reduce this artificially induced noise, special transducer holders have been used for aeroacoustic wind tunnel testing by NASA. This holder is a sleeve into which the transducer fits, with a cap that allows it to be mounted in a recessed hole in the model. A single hole in the holder allows the transport of the tunnel medium so the transducer can discriminate the fluctuating pressure due to the turbulent boundary layer noise. The holder is first dry fitted into the model and any difference in height between the holder and the model surface can be sanded flush. The holder is then removed from the model, the transducer glued inside the holder, and the holder replaced in the model, secured also with glue, thus eliminating the problem of noise level increases due to lack of flushness. In order to work with this holder design, special transducers have been ordered with their standard screen removed and the diaphragm moved as close to the top of the casing as possible to minimize any cavity volume. Although this greatly reduces induced noise due to the transducers being out of flush, the holders can also induce a cavity resonance that is usually at a very high frequency. This noise is termed transducer mount induced noise (XMIN). The peak of the mode can vary with the cavity depth, boundary layer noise that can excite the mode, tunnel flow medium, and the build of the transducers. Because the boundary layer flow interaction with the microphone holder seems to have some effect on the cavity resonance response, the NASA/Marshall Space Flight Center (MSFC) aeroacoustic team postulated that changing the design of the holder might reduce the cavity resonance response. An experiment was performed at the MSFC Trisonic Wind Tunnel comparing a new holder design with the traditional MSFC holder. The new holder design is intended to mimic the Kulite Semiconductors, Inc. B-screen, where the single hole of the traditional MSFC holder is replaced by a series of ten 0.007 inch diameter holes. This particular design serves to protect the transducer diaphragm as in the manufacturer's B-screen, but also increases the frequency of the XMIN such that it is not apparent in the data collected from aeroacoustic wind tunnel tests. MSFC compared the two holder designs by installing two transducers in standard holders on one side of a ten inch long ten degree cone, and two transducers in B-screen holders on the opposite side for a series of runs at different conditions. Over 11-13 February, 2013, the model was run at Mach numbers between 0.80 and 1.96 at angles of attack at 0 deg, plus or minus 1 deg, plus or minus 2 deg, plus or minus 4 deg, and plus or minus 8 deg. Model roll attitudes at 0 deg, 90 deg, and 180 deg were tested to isolate potential tunnel bias. This paper presents results from the test showing that the proposed holder design significantly reduces the influence of XMIN on measured fluctuating pressure levels.

Herron, A. J.↗

NASA NTRS1989

NASA SC(2)-0714 airfoil data corrected for sidewall boundary-layer effects in the Langley 0.3-meter transonic cryogenic tunnel

This report presents the corrected aerodynamic data for A NASA SC(2)-0714 airfoil tested in the Langley 0.3-Meter Transonic Cryogenic Tunnel. This test was another in the series of tests involved in the joint NASA/U.S. industry Advanced Technology Airfoil Tests program. This 14 percent thick critical airfoil was tested at Mach numbers from 0.6 to 0.76 and angles of attack from -2.0 to 6.0 deg. The test Reynolds numbers were 4 million, 6 million, 10 million, 15 million, 30 million, 40 million, and 45 million. Corrections for the effects of the sidewall boundary layer have been made. The uncorrected data were previously published in NASA Technical Memorandum 4044.

Jenkins, Renaldo V.↗

DOE OSTI2020

Tuning the interfacial spin-orbit coupling with ferroelectricity

Detection and manipulation of spin current lie in the core of spintronics. Here we report an active control of a net spin Hall angle, θ SHE (net), in Pt at an interface with a ferroelectric material PZT (PbZr 0.2 Ti 0.8 O 3 ), using its ferroelectric polarization. The spin Hall angle in the ultra-thin Pt layer is measured using the inverse spin Hall effect with a pulsed tunneling current from a ferromagnetic La 0.67 Sr 0.33 MnO 3 electrode. The effect of the ferroelectric polarization on θ SHE (net) is enhanced when the thickness of the Pt layer is reduced. When the Pt layer is thinner than 6 nm, switching the ferroelectric polarization even changes the sign of θ SHE (net). This is attributed to the reversed polarity of the spin Hall angle in the 1 st -layer Pt at the PZT/Pt interface when the ferroelectric polarization is inverted, as supported by the first-principles calculations. These findings suggest a route for designing future energy efficient spin-orbitronic devices using ferroelectric control.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1982

Results of buffet tests in a cryogenic wind tunnel

Buffet tests on two semispan wing models with different leading edge sweep show that it is feasibile to use the standard dynamic wing root bending moment technique in a cryogenic wind tunnel. One model was a slender 65 deg swept delta wing with sharp leading edges. The other model was an unswept wing of aspect ratio 1.5 with a British NPL 9510 airfoil section. The results for the 65 deg swept delta wing indicate the importance of matching the reduced frequency parameter in model tests for planforms which are sensitive to reduced frequency parameter if quantitative buffet measurements are required. The unique ability of a pressurized cryogenic wind tunnel to separate the effects of Reynolds number and of static aeroelastic distortion by variations in the tunnel stagnation temperature and pressure were demonstrated.

Boyden, R. P.↗

NASA NTRS2008

Experimental Measurement of RCS Jet Interaction Effects on a Capsule Entry Vehicle

An investigation was made in NASA Langley Research Center s 31-Inch Mach 10 Tunnel to determine the effects of reaction-control system (RCS) jet interactions on the aft-body of a capsule entry vehicle. The test focused on demonstrating and improving advanced measurement techniques that would aid in the rapid measurement and visualization of jet interaction effects for the Orion Crew Exploration Vehicle while providing data useful for developing engineering models or validation of computational tools used to assess actual flight environments. Measurements included global surface imaging with pressure and temperature sensitive paints and three-dimensional flow visualization with a scanning planar laser induced fluorescence technique. The wind tunnel model was fabricated with interchangeable parts for two different aft-body configurations. The first, an Apollo-like configuration, was used to focus primarily on the forward facing roll and yaw jet interactions which are known to have significant aft-body heating augmentation. The second, an early Orion Crew Module configuration (4-cluster jets), was tested blowing only out of the most windward yaw jet, which was expected to have the maximum heating augmentation for that configuration. Jet chamber pressures and tunnel flow conditions were chosen to approximate early Apollo wind tunnel test conditions. Maximum heating augmentation values measured for the Apollo-like configuration (>10 for forward facing roll jet and 4 for yaw jet) using temperature sensitive paint were shown to be similar to earlier experimental results (Jones and Hunt, 1965) using a phase change paint technique, but were acquired with much higher surface resolution. Heating results for the windward yaw jet on the Orion configuration had similar augmentation levels, but affected much less surface area. Numerical modeling for the Apollo-like yaw jet configuration with laminar flow and uniform jet outflow conditions showed similar heating patterns, qualitatively, but also showed significant variation with jet exit divergence angle, with as much as 25 percent variation in heat flux intensity for a 10 degree divergence angle versus parallel outflow. These results along with the fabrication methods and advanced measurement techniques developed will be used in the next phase of testing and evaluation for the updated Orion RCS configuration.

Buck, Gregory M.↗