SEARCH · Engineering Papers

Results for “TELESCOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Use of graphite epoxy composites in the Solar-A Soft X-Ray Telescope

This paper describes the use of composite materials in the Soft X-Ray Telescope (SXT). One of the primary structural members of the telescope is a graphite epoxy metering tube. The metering tube maintains the structural stability of the telescope during launch as well as the focal length through various environmental conditions. The graphite epoxy metering tube is designed to have a negative coefficient of thermal expansion to compensate for the positive expansion of titanium structural supports. The focus is maintained to + or - 0.001 inch by matching the CTE of the composite tube to the remaining structural elements.

Jurcevich, B. K.↗

NASA NTRS1991

Multi-Spectral Solar Telescope Array. II - Soft X-ray/EUV reflectivity of the multilayer mirrors

The Multispectral Solar Telescope Array is a rocket-borne observatory which encompasses seven compact soft X-ray/EUV, multilayer-coated, and two compact far-UV, interference film-coated, Cassegrain and Ritchey-Chretien telescopes. Extensive measurements are presented on the efficiency and spectral bandpass of the X-ray/EUV telescopes. Attention is given to systematic errors and measurement errors.

Barbee, Troy W., Jr.↗

NASA NTRS1991

Multi-Spectral Solar Telescope Array. V - Temperature diagnostic response to the optically thin solar plasma

The compact soft X-ray/EUV/FUV multilayer coated telescopes developed for solar chromosphere, corona, and corona/solar-wind interface studies permit the use of conventional (Cassegrain, Herschelian, etc.) configurations. The multilayer coatings also allow a narrow-wavelength band to be selected for imaging. NASA's Multi-Spectral Solar Telescope Array is composed of 17 of these compact telescopes; attention is given to their ability to obtain temperature-diagnostic information concerning the solar plasma.

Deforest, Craig E.↗

NASA NTRS1991

Operation of the University of Hawaii 2.2M telescope on Mauna Kea

NASA's planetary astronomy program provides part of the funding for the 2.2 meter telescope. The parameters for time on the telescope are laid out. A major instrumental highlight has been the commissioning of a 256 x 256 near infrared camera which uses a Rockwell NICMOS-3 array. At the f/10 focus, image scales of 0.37 and 0.75 arcsec/pixel are available. A new, high quantum efficiency Tektronix 1024 x 1024 CCD saw first light on the telescope in 1991, and was available regularly from April 1991. Data from both of these detectors are transmitted directly to the Sun workstation for immediate analysis by the observers. The autoguider software was enhanced to permit guided tracking on objects have nonsideral motions (i.e., solar system objects).

Hall, Donald N. B.↗

NASA NTRS1990

Hubble Space Telescope: Cycle 1 calibration plan. Version 1.0

The framework for quantitative scientific analysis with the Hubble Space Telescope (HST) will be established from a detailed calibration program, and a major responsibility of staff in the Telescope & Instruments Branch (TIB) is the development and maintenance of this calibration for the instruments and the telescope. The first in-orbit calibration will be performed by the SI Investigation Definition Teams (IDTs) during the Science Verification (SV) period in Cycle 0 (expected to start 3 months after launch and last for 5 months). Subsequently, instrument scientists in the TIB become responsible for all aspects of the calibration program. Because of the long lead times involved, TIB scientists have already formulated a calibration plan for the next observing period, Cycle 1 (expected to last a year after the end of SV), which has been reviewed and approved by the STScI Director. The purpose here is to describe the contents of this plan. Our primary aim has been to maintain through Cycle 1 the level of calibration that is anticipated by the end of SV. Anticipated accuracies are given here in tabular form - of course, these accuracies can only be best guesses because we do not know how each instrument will actually perform on-orbit. The calibration accuracies are expected to satisfy the normal needs of both the General Observers (GOs) and the Guaranteed Time Observers (GTOs).

Stanley, Peggy↗

NASA NTRS1992

Arm deploy mechanisms to help correct the Hubble Space Telescope's vision

As has been well publicized, the primary mirror of the Hubble Space Telescope was manufactured with an incorrect curvature which results in an aberrated output image. Ball Aerospace, under contract to GSFC, is designing the Corrective Optics Space Telescope Axial Replacement (COSTAR) to provide correcting optics for the existing axial science instruments in the telescope. Integral to COSTAR are the arm deploy mechanisms which position and hold the corrective optic mirrors.

Copeland, F. Kent↗

NASA NTRS1990

Mission optimization of the Space Infrared Telescope Facility

The Space Infrared Telescope Facility (SIRTF) mission based on a cryogenically cooled telescope is described. The SIRTF makes it possible to perform background limited measurements with three focal plane instruments in the wavelength range 2-700 microns over the entire celestial sphere for at least five years. A telescope performance limited by the natural astrophysical background between 2 to 300 microns is achieved by using a superfluid helium cryogenic system for maintaining the forebaffle temperature below 8 K. The attitude control system based on Extreme Ultra-Violet Explorer reaction wheels meets the large and small angle slew requirements and provides 0.15 arc sec pointing stability. The present HEO baseline configuration has a mass of 4370 kg. The future Titan IV/Centaur launch capability to 100,000 km for a SIRTF-sized payload is at least 5770 kg.

Brooks, Walter F.↗

NASA NTRS1992

Low-cost, high-resolution, single-structure array telescopes for imaging of low-earth-orbit satellites

Telescopes that are designed for the unconventional imaging of near-earth satellites must follow unique design rules. The costs must be reduced substantially over those of the conventional telescope designs, and the design must accommodate a technique to circumvent atmospheric distortion of the image. Apertures of 12 m and more along with altitude-altitude mounts that provide high tracking rates are required. A novel design for such a telescope, optimized for speckle imaging, has been generated. Its mount closely resembles a radar mount, and it does not use the conventional dome. Costs for this design are projected to be considerably lower than those for the conventional designs. Results of a design study are presented with details of the electro-optical and optical designs.

Massie, N. A.↗

NASA NTRS1992

Polarization aberration analysis of the Advanced X-ray Astrophysics Facility Telescope assembly

The Advanced X-ray Astrophysics Facility (AXAF) Telescope consists of six concentric paraboloid-hyperboloid pairs of mirrors that operate near grazing incidence. Because of the substantial polarization effects at large angles of incidence there has been concern regarding the feasibility of doing polarimetry near the telescope focal plane. The primary mirror is here shown to act as a tangentially directed half-wave linear retarder and almost completely to depolarize the linearly polarized component of the light. The secondary mirror introduces and additional half-wave of linear retardance. The two-mirror telescope assembly acts as a tangentially directed one-wave linear retarder. Each mirror depolarizes alone but together the two-mirror assembly preserves the polarization state. The net instrumental polarization effects are small and polarimetry is feasible with AXAF.

Chipman, Russell A.↗

NASA NTRS1991

Scientific results from the Hubble Space Telescope Fine Guidance Sensors

The Fine Guidance Sensors of the Hubble Space Telescope have two roles to play. They are the ultimate pointing and control instruments onboard the spacecraft and they are the primary astrometric instruments of the observatory. Because they are used for every scientific observation with the Hubble Space Telescope, independently of the ultimate scientific instrument being utilized, there is much more experience with them than with any of the other scientific devices. The Fine Guidance Sensors have already serendipitously discovered their first binary star from the Hubble Space Telescope Guide Star Catalog, have been exercised in most of their observing modes, and are able to fulfill their pointing and control functions up to their original specifications (in the absence of external influences). In addition, the imperfections in the primary mirror have minimally affected the performance of the Fine Guidance Sensors. An up-to-date summary of FGS engineering and science will be presented.

Taff, L. G.↗

NASA NTRS1991

Effects of the lunar environment on optical telescopes and instruments

The effects of the hostile lunar environment are assessed, and potential techniques for adverse-effect mitigation are developed. The environmental concerns addressed include Galactic cosmic ray (GCR) effects on telescope electronics, lunar dust obscuration and damage to optical surfaces, and micrometeor cratering of the optics and support structure. The feasibility of shielding the electronics from the GCR flux and associated secondaries is investigated as one option for noise reduction. An alternative approach to noise reduction uses shorter integration ties and multiple images for background subtraction. Dust abatement techniques such as stabilizing the lunar soil at the launch and telescope sites and covering the optics during high contamination-risk times are evaluated. The micrometeorite flux and associated surface cratering are assessed for their impact on the lifetime and integrity of the telescope.

Johnson, Charles L.↗

NASA NTRS1993

Passive Cooling For Large Infrared Telescopes

Conceptual passive-cooling technique enables very large infrared telescope in vacuum of outer space cooled to below 20 K without using cryogen. Telescope orbiting Earth at high altitude of around 100,000 km. Scheme also offers very small gradient of temperature across primary telescope reflector, so thermal distortions smaller; accuracy of surface figure of reflector significantly enhanced. Passive-cooling technique also applied to building of very large cryostats and to development of very large sun shields in traditional manner, and some elements of technique adapted for current small observatories.

Lin, Edward I.↗

NASA NTRS1993

How to get unlimited observing time on a 4 metre telescope

As the astronomical community moves ever more towards fewer and larger telescopes it is not just desirable but essential to make the maximum possible use of these new facilities. The Hitchhiker parallel CCD camera has been specially designed to increase the scientific output of a large telescope by imaging the off-axis field of view. The large data set collected by this instrument consists of deep CCD multicolor data of the distant Universe and is extremely well suited to the study of faint galaxies and their evolution, as well as other areas. The instrument's design and some of its projects are briefly discussed below and demonstrates the scientific value such instruments could have if incorporated on all new telescopes.

Driver, S. P.↗

NASA NTRS1993

Wide-field direct CCD observations supporting the Astro-1 Space Shuttle mission's Ultraviolet Imaging Telescope

Wide field direct CCD observations are being obtained to support and complement the vacuum-ultraviolet (VUV) images provided by Astro's Ultraviolet Imaging Telescope (UIT) during a Space Shuttle flight in December 1990. Because of the wide variety of projects addressed by UIT, the fields observed include (1) galactic supernova remnants such as the Cygnus Loop and globular clusters such as Omega Cen and M79; (2) the Magellanic Clouds, M33, M81, and other galaxies in the Local Group; and (3) rich clusters of galaxies, principally the Perseus cluster and Abell 1367. Ground-based observations have been obtained for virtually all of the Astro-1 UIT fields. The optical images allow identification of individual UV sources in each field and provide the long baseline in wavelength necessary for accurate analysis of UV-bright sources. To facilitate use of our optical images for analysis of UIT data and other projects, we plan to archive them, with the UIT images, at the National Space Science Data Center (NSSDC), where they will be universally accessible via anonymous FTP. The UIT, one of three telescopes comprising the Astro spacecraft, is a 38-cm f/9 Ritchey-Chretien telescope on which high quantum efficiency, solar-blind image tubes are used to record VUV images on photographic film. Five filters with passbands centered between 1250A and 2500A provide both VUV colors and a measurement of extinction via the 2200A dust feature. The resulting calibrated VUV pictures are 40 arcminutes in diameter at 2.5 arcseconds resolution. The capabilities of UIT, therefore, complement HST's WFPC: the latter has 40 times greater collecting area, while UIT's usable field has 170 times WFPC's field area.

Hintzen, Paul↗

NASA NTRS1993

A magnetic isolation and pointing system for the astrometric telescope facility

The astrometric telescope facility (ATF), a 20-meter telescope designed for long-term detection and observation of planetary systems outside of the solar system, is scheduled to be a major user of the Space Station's payload pointing system (PPS) capabilities. However, because the ATF has such a stringent pointing stability specification (as low as 0.01 arcsec error over the frequency range from 5 to 200 hertz) and requires +/- 180-degree roll rotation around the telescope's line of sight, the ATF's utilization of the PPS requires the addition of a mechanism or mechanisms to enhance the basic PPS capabilities. The results of a study conducted to investigate the ATF pointing performance achievable by the addition of a magnetic isolation and pointing (MIPS) system between the PPS upper gimbal and the ATF, and separately, by the addition of a passive isolation system between the Space Station and the PPS base are presented. In addition, the study produced requirements on magnetic force and gap motion as a function of the level of Space Station disturbance. These results were used to support the definition of a candidate MIPS. Pointing performance results from the study indicate that a MIPS can meet the ATF pointing requirements in the presence of a PPS base transitional acceleration of up to 0.018g, with reasonable restrictions placed on the isolation and pointing bandwidths. By contrast, the passive base isolator system must have an unrealistically low isolation bandwidth on all axes (less than 0.1 hertz) to meet ATF pointing requirements. The candidate MIPS is based on an assumed base translational disturbance of 0.01g. The system fits within the available annular region between the PPS and ATF while meeting power and weight limitations and providing the required payload roll motion. Payload data and power services are provided by noncontacting transfer devices.

Smith, Marcie↗

NASA NTRS1990

The Hubble Space Telescope

The Hubble Space Telescope was launched from the Kennedy Space Center on April 24, 1990. Its initial check-out indicates that all sub-systems of the satellite are working very well, with two key exceptions: The line-of-sight pointing is subject to occasional jitter apparently induced by thermal stresses in the solar arrays; this is expected to be overcome. The telescope mirrors are found to contain approximately 0.5 wave rms of spherical aberration which cannot be overcome by any controls on board the satellite. This defect will limit the scientific performance of the telescope in the short run. However, the aberration can be fully corrected in the optical designs of future replacement instruments, and the delivery schedules of these instruments are being accelerated.

Boggess, Albert↗

NASA NTRS1992

Design of a precise and stable composite telescope structure for the Ultraviolet Coronagraph Spectrometer (UVCS)

The Ultraviolet Coronagraph Spectrometer is a state of the art instrument which will be flown aboard the ESA SOHO spacecraft in 1995. A major objective of the SOHO is to investigate the solar corona and the solar wind by measuring parameters of the plasma, both in the source and acceleration regions, and in interplanetary space. The UVCS will provide ultraviolet spectroscopic diagnostics of temperature, density, and outflow velocity for coronal ions located between the base of the solar corona and 10 solar radii. The requirements placed on the UVCS telescope structure by the science and the spacecraft are challenging. Obtaining this scientific data requires that the telescope maintain pointing stability within a few arc-seconds in a transient thermal environment and an imaging stability within a few microns. Strict mass allowances permit only 22 kg for the 2.5 meter long telescope structure out of a total instrument allotment of 124 kg. The instrument is required to have a high minimum natural frequency of 70 Hertz and withstand launch inertia loads in excess of 18-G's while kinematically supported.

Kilpatrick, Mark C.↗

NASA NTRS1992

SiC lightweight telescopes for advanced space applications. I - Mirror technology

A SiC based telescope is an extremely attractive emerging technology which offers the lightweight and stiffness features of beryllium, the optical performance of glass to diffraction limited visible resolution, superior optical/thermal stability to cryogenic temperatures, and the cost advantages of an aluminum telescope. SSG has developed various SiC mirrors with and without a silicon coating and tested these mirrors over temperature ranges from +50 C to -250 C. Our test results show less than 0.2 waves P-V in visible wavefront change and no hysteresis over this wide temperature range. Several SSG mirrors are representative of very lightweight SiC/Si mirrors including (1) a 9 cm diameter, high aspect ratio mirror weighing less than 30 grams and (2) a 23 cm diameter eggcrated mirror weighing less than 400 grams. SSG has also designed and analyzed a 0.6 meter SiC based, on axis, three mirror reimaging telescope in which the primary mirror weighs less than 6 kg and a 0.5 meter GOES-like scan mirror. SSG has also diamond turned several general aspheric SiC/Si mirrors with excellent cryo optical performance.

Anapol, Michael I.↗