Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

An experimental geostationary platform - A step toward the 1990's

NASA studies on geostationary platforms are reviewed. Traffic models for geostationary missions through the year 2000 are presented, and the benefits of platforms are shown, as compared with accomplishing the same missions on specialized satellites. These benefits are illustrated by a case study (involving Leasat) demonstrating that substantial cost savings can result because of economies of scale. Technologies in need of development and demonstration are identified, and attention is given to the potential NASA Experimental Geostationary Platform.

Carey, W. T., Jr.↗
NASA NTRS1982

Steps toward the Hubble constant. VIII - The global value

The problem of determining the global Hubble constant is approached by using two distance indicators whose dispersion in absolute magnitude is small, and hence which are virtually free of the Malmquist bias. New data are presented on the mean absolute-magnitude of the brightest individual red and blue supergiant stars in very nearby galaxies, calibrated relative to the Cepheids. The results are used to calibrate the maximum absolute blue magnitude for two well-observed Type I supernovae (SNe I). The velocity-relative distance diagram for 16 SNe I with known maximum apparent blue magnitudes is then calibrated using distances for IC 4182 and NGC 4214, with the result that the global Hubble constant equals 50 + or - 7 km per second per megaparsec. The result is compared with the known age of globular clusters in the Galaxy to show that the cosmological and the evolutionary time scales now closely agree.

Sandage, A.↗
NASA NTRS1983

M-step preconditioned conjugate gradient methods

Preconditioned conjugate gradient methods for solving sparse symmetric and positive finite systems of linear equations are described. Necessary and sufficient conditions are given for when these preconditioners can be used and an analysis of their effectiveness is given. Efficient computer implementations of these methods are discussed and results on the CYBER 203 and the Finite Element Machine under construction at NASA Langley Research Center are included.

Adams, L.↗
NASA NTRS1983

An M-step preconditioned conjugate gradient method for parallel computation

This paper describes a preconditioned conjugate gradient method that can be effectively implemented on both vector machines and parallel arrays to solve sparse symmetric and positive definite systems of linear equations. The implementation on the CYBER 203/205 and on the Finite Element Machine is discussed and results obtained using the method on these machines are given.

Adams, L.↗
NASA NTRS1983

Analysis of gap heating due to stepped tiles in the shuttle thermal protection system

Analytical methods used to investigate entry gap heating in the Shuttle orbiter thermal protection system are described. Analytical results are given for a fuselage lower-surface location and a wing lower-surface location. These are locations where excessive gap heating occurred on the first flight of the Shuttle. The results of a study to determine the effectiveness of a half-height ceramic fiber gap filler in preventing hot-gas flow in the tile gaps are also given.

Petley, D. H.↗
NASA NTRS1983

First-order Fermi acceleration in solar flares as a mechanism for the second-step acceleration of prompt protons and relativistic electrons

Solar flare data from June 27, 1980 balloon-based observations were studied in terms of the hard X ray component. A temporal delay of 3 sec was observed for the X ray emissions above 235 keV. The delay occurred relative to the low-energy electrons and indicated a second acceleration stage. An estimation of the acceleration rate of the first-order Fermi process operating in a closed flare loop was found to be in agreement with the resulting data, including the acceleration of both protons and relativistic electrons. Additional support for the first-order Fermi process is noted in the fact that flares generally occur in magnetic loops, a condition which allows energetic particles to continually interact with the upward moving shock fronts. A correlation has also been observed between the delay times and the H-alpha areas, encouraging the interpretation that the delay times are the shock transit times.

Bai, T.↗
NASA NTRS1983

A two step linear statistical technique using leaps and bounds procedure for retrieval of geophysical parameters from microwave radiometric data

A linear statistical technique using a 'leaps and bounds' procedure (Furnival and Wilson, 1974) is developed for retrieving geophysical parameters from remote measurements. It is used for retrieving sea surface temperatures from the Scaning Multichannel Microwave Radiometer (SMMR) on Seasat. The technique uses an efficient algorithm to select the best fixed-size subset of the 10 SMMR channels for linearly retrieving a given geophysical parameter. The 5-channel subset (6.6V, 6.6H 10H, 18V, 21H), where V and H refer to, respectively, the vertical and horizontal polarizations and the numbers are the channel frequencies in gigahertz, gives the minimum rms error in estimating the sea surface temperature. A comparison with ground truth indicates that the algorithm infers the temperature with an rms accuracy of better than 1.5 K under most environmental conditions. A quality control procedure which is seen as holding promise for further improving the accuracy is proposed.

Kakar, R. K.↗
NASA NTRS1982

Visible signatures of the multi-step transition to a beam-plasma-dicharge

Observations are presented of the beam-plasma-discharge (BPD) at pressures below 4 x 10 to the -6th Torr, which show that there are three abrupt transitions in the beam-plasma interactions. The low-current A1 state (the basic beam with its noded configuration), is dominated by direct collisional ionization of the background gas. In the A2 state (the noded beam surounded by a weak halo), the ionization is supplemented by another mechanism which perhaps involves cyclotron interactions. The B and C states are distinctly separate forms of the BPD which involve a convective redistribution of beam energy as indicated by the changes in the beam nodes. The B and C states are also found to involve enhancements of between 20-100 in the power dissipation by ionization. Thus, in a 20 m pathlength, it is found that approximately 1-4 percent of the beam power is dissipated by the ionization associated with the BPD.

Hallinan, T. J.↗
NASA NTRS1983

Complexities of high temperature metal fatigue: Some steps toward understanding

After pointing out many of the complexities that attend high temperature metal fatigue beyond those already studied in the sub-creep range, a description of the micromechanisms of deformation and fracture is presented for several classes of materials that were studied over the past dozen years. Strainrange Partitioning (SRP) is used as a framework for interpreting the results. Several generic types of behavior were observed with regard both to deformation and fracture and each is discussed in the context of the micromechanisms involved. Treatment of cumulative fatigue damage and the possibility of ""healing'' of damage in successive loading loops, has led to a new interpretation of the Interaction Damage Rule of SRP. Using the concept of ""equivalent micromechanistic damage'' -- that the same damage on a microscopic scale is induced if the same hysteresis loops are generated, element for element -- it turns out the Interaction Damage Rule essentially compounds a number of variants of hysteresis loops, all of which have the same damage according to SRP concepts, into a set of loops each containing only one of the generic SRP strainranges. Thus the damage associcated with complex loops comprising several types of strainrange is analyzed by considering a combination of loops each containing only one type of strainrange. This concept is expanded to show how several independent loops can combine to ""heal'' creep damage in a complex loading history.

Manson, S. S.↗
NASA NTRS1984

STEP flight experiments Large Deployable Reflector (LDR) telescope

Flight testing plans for a large deployable infrared reflector telescope to be tested on a space platform are discussed. Subsystem parts, subassemblies, and whole assemblies are discussed. Assurance of operational deployability, rigidization, alignment, and serviceability will be sought.

Runge, F. C.↗
NASA NTRS1983

Feasibility of remotely manipulated welding in space. A step in the development of novel joining technologies

In order to establish permanent human presence in space technologies of constructing and repairing space stations and other space structures must be developed. Most construction jobs are performed on earth and the fabricated modules will then be delivered to space by the Space Shuttle. Only limited final assembly jobs, which are primarily mechanical fastening, will be performed on site in space. Such fabrication plans, however, limit the designs of these structures, because each module must fit inside the transport vehicle and must withstand launching stresses which are considerably high. Large-scale utilization of space necessitates more extensive construction work on site. Furthermore, continuous operations of space stations and other structures require maintenance and repairs of structural components as well as of tools and equipment on these space structures. Metal joining technologies, and especially high-quality welding, in space need developing.

Masubuchi, K.↗
NASA NTRS1984

Use of DBMS in Multi-step Information Systems for LANDSAT

Data are obtained by the thematic mapper on LANDSAT 4 in seven bands and are telemetered and electronically recorded at ground station where the data must be geometrically and rediometrically corrected before a photographic image is produced. Current system characteristics for processing this information are described including the menu for data products reports. The tracking system provides up-to-date and complete information and requires that production stages adhere to the inherent DBMS structure. The concept can be applied to any procedures requiring status information.

Noll, C. E.↗
NASA NTRS1984

Solar Total Energy Project (STEP) Performance Analysis of High Temperature Energy Storage Subsystem

The 1982 milestones and lessons learned; performance in 1983; a typical day's operation; collector field performance and thermal losses; and formal testing are highlighted. An initial test that involves characterizing the high temperature storage (hts) subsystem is emphasized. The primary element is on 11,000 gallon storage tank that provides energy to the steam generator during transient solar conditions or extends operating time. Overnight, thermal losses were analyzed. The length of time the system is operated at various levels of cogeneration using stored energy is reviewed.

Moore, D. M.↗