Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Enhanced cycling stability of Ni-rich Li-metal cells enabled by dual vinylene carbonate and tris(trimethylsilyl)borate electrolyte additives

NMC811 (LiNi 0.8 Co 0.1 Mn 0.1 O 2 ) and other high-Ni chemistries are promising cathode candidates for high-performance electric vehicles, owing to their high energy density and reduced cobalt content. However, their long-term cycling stability is hindered by surface degradation, particularly when paired with conventional electrolytes and a lithium metal anode. Electrolyte additives represent a practical approach to enhance interfacial stability and improve overall battery performance by promoting the formation of a robust electrolyte–electrode interphase (EEI). In this study, we revisit the effects of vinylene carbonate (VC) and tris(trimethylsilyl)borate (TMSB) additives on single-crystal SC-NMC811||Li cells. While TMSB only increases the open-circuit voltage and initial overpotential, it delivers superior capacity retention at C/3 compared to cells containing only VC or a dual additive system (VC and TMSB). Notably, under fast-charging conditions (1C, 2C, and 5C), the dual-additive system significantly outperforms other formulations, achieving markedly enhanced long-term capacity retention. Comprehensive electrochemical and spectroscopic analyses reveal that the VC/TMSB dual-additive system suppresses surface transition in NMC811, mitigates structural degradation by forming a thin, LiF-deficient cathode-electrolyte interface (CEI) layer. Moreover, they promote smooth and dense Li deposition and generate a LiF-deficient solid-electrolyte interphase (SEI). Consequently, the synergistic stabilization of both the CEI and SEI effectively limits the overall cell impedance growth during extended cycling. These findings provide key insights into co-additive strategies for engineering stable interfaces in high-energy Ni-rich Li-metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Alloying multiple halide perovskites on the same sublattice in search of stability and target band gaps

Single-component halide perovskites (HPs) rarely satisfy all the necessary criteria for optoelectronic applications, such as achieving an optimal band gap while maintaining high chemical and structural stability. Alloying halide perovskites has emerged as a promising strategy, not only to enhance stability but also to fine-tune their electronic and optical properties. In this work, we explore multiple degrees of freedom in alloy design, considering different substitution sublattices sites (A, B, or X in ABX3 perovskites), various chemical species (isovalent and hetero-valent elements), and multi-component compositions on a given sublattice. Using first-principles calculations based on density functional theory (DFT), we investigate how compositional variations influence the electronic (band gap) and structural properties (mixing enthalpy) of HP alloys. Our approach employs the polymorphous cell model, allowing full local relaxation which breaks local symmetry while preserving global cubic symmetry—an essential framework for accurately modeling HPs. Our results reveal that X-site mixing (halogen substitution) primarily affects the valence band maximum, allowing target band gap engineering. Additionally, variations in halogen radii introduce internal strain through octahedral distortions, influencing the mixing enthalpy. A-site substitution, while not directly contributing to the band edge states, modifies structural stability via volume effects, indirectly impacting the band gap. B-site alloying plays a dominant role in band gap modulation, leading to either positive or negative band gap bowing. Specifically, isovalent B-site mixing (Sn–Pb) induces strong positive bowing, where the alloy band gap is smaller than the average gap of parent compounds, whereas hetero-valent mixing (Cd–Pb) results in pronounced negative bowing. As an aside, we investigate the competition between the excess energy of disordered alloys vs. that of long-range ordered double perovskites of the same compositions, seeking examples of ordered phases emerging from disordered alloys. Furthermore, our findings provide fundamental insights into the electronic and structural behavior of HP alloys, offering valuable design principles for the development of stable and efficient materials for next-generation photovoltaic and optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2025

Atomic layer deposition of nickel sulfide thin films and their thermal and electrochemical stability

Nickel sulfides (NiS x ) show promise for a range of energy and other applications, but their (in)stability under processing and operating conditions is scarcely studied. Herein, we have developed a new NiS x atomic layer deposition process using an easily synthesized NiCl 2 (TMPDA) precursor (TMPDA = N,N,N′,N′-tetramethyl-1,3-propanediamine) with H 2 S. Thin films deposited at 165–225 °C consist mostly of the β-NiS phase and display low resistivity (∼40–120 μΩ cm), high purity (<3 at% impurities), and a rough morphology. The thermal stability of the NiS x thin films is studied using high-temperature X-ray diffraction, revealing that structural and compositional changes occur in reducing, inert, and oxidizing atmospheres at approximately 300–400 °C. Under electrochemical water splitting conditions, the films are unstable in acid due to dissolution, especially at oxidizing potentials. In an alkaline electrolyte, we do not observe Ni dissolution, but β-NiS transforms to Ni 3 S 2 under HER conditions, possibly supplemented with Ni and/or Ni(OH) 2 species. Under alkaline OER, all sulfur is lost and NiOOH is formed. In addition to offering an attractive, scalable route to the synthesis of NiS x thin films, our work highlights the importance of thermal and electrochemical (in)stability of sulfides as a crucial step for understanding and engineering materials for energy and other applications.

Mattinen, Miika [Univ. of Helsinki (Finland); Stan↗
DOE OSTI2021

Lyapunov stability of smart inverters using linearized distflow approximation

Fast-acting smart inverters that utilize preset operating conditions to determine real and reactive power injection/consumption can create voltage instabilities (over-voltage, voltage oscillations and more) in an electrical distribution network if set-points are not properly configured. In this work, linear distribution power flow equations and droop-based Volt–Var and Volt–Watt control curves are used to analytically derive a stability criterion using Lyapunov analysis that includes the network operating condition. The methodology is generally applicable for control curves that can be represented as Lipschitz functions. The derived Lipschitz constants account for smart inverter hardware limitations for reactive power generation. A local policy is derived from the stability criterion that allows inverters to adapt their control curves by monitoring only local voltage, thus avoiding centralized control or information sharing with other inverters. The criterion is independent of the internal time-delays of smart inverters. Simulation results for inverters with and without the proposed stabilization technique demonstrate how smart inverters can mitigate voltage oscillations locally and mitigate real and reactive power flow disturbances at the substation under multiple scenarios. The study concludes with illustrations of how the control policy can dampen oscillations caused by solar intermittency and cyberattacks.

42 ENGINEERING↗
DOE OSTI2020

Analytic stability boundaries for compressional and global Alfvén eigenmodes driven by fast ions. II. Interaction via Landau resonance

We report that conditions for net fast ion drive are derived for beam-driven, co-propagating, sub-cyclotron compressional (CAE) and global (GAE) Alfvén eigenmodes driven by the Landau resonance with super-Alfvénic fast ions. Approximations applicable to realistic neutral beam distributions and mode characteristics observed in spherical tokamaks enable the derivation of marginal stability conditions for these modes. Such conditions successfully reproduce the stability boundaries found from numerical integration of the exact expression for local fast ion drive/damping. Coupling between the CAE and GAE branches of the dispersion due to finite ω/ω ci and |k ∥ /k ⊥ | is retained and found to be responsible for the existence of the GAE instability via this resonance. Finally, encouraging agreement is demonstrated between the approximate stability criterion, simulation results, and a database of NSTX observations of co-CAEs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

On the elastic anisotropy of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O compound

Herein, we study the elastic properties of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O using experimental and first principles techniques. Our measurements of the indentation modulus on grains with a wide range of crystallographic orientations of the entropy-stabilized oxide revealed a high degree of elastic isotropy at ambient conditions. First principles calculations predict mild elastic anisotropy for the paramagnetic structure, which decreases when the system is considered to be non-magnetic. When the antiferromagnetic state of CoO, CuO, and NiO is accounted for in the calculations, a slight increase in elastic anisotropy is observed, suggesting a coupling between magnetic ordering and the orientation dependent elastic properties. Furthermore, an examination of the local structure reveals that the isotropy is favored through local ionic distortions of Cu and Zn—due to their tendencies to form tenorite and wurtzite phases. The relationships between the elastic properties of the multicomponent oxide and those of its constituent binary oxides are reviewed. These insights open up new avenues for controlling isotropy for technological applications through tuning composition and structure in the entropy-stabilized oxide or the high-entropy compounds in general.

Entropy↗
DOE OSTI2021

Atomic scale investigation of aluminum incorporation, defects, and phase stability in β -(Al x Ga 1-x ) 2 O 3 films

The development of novel ultra-wide bandgap (UWBG) materials requires precise understanding of the atomic level structural origins that give rise to their important properties. We study the aluminum atom incorporation, defect formation, and their relationships with phase stability in β-(Al x Ga 1-x ) 2 O 3 films, a promising candidate for UWBG applications, to explain atomic scale structural characteristics and properties using a combination of quantitative scanning transmission electron microscopy (STEM) and density functional theory (DFT). Our STEM analysis indicates that ~54% of the incorporated Al substitutes on the octahedrally coordinated Ga 2 site in a series of films grown with different techniques and alloy concentrations. DFT calculations show that, while Al energetically prefers the octahedral site, surface reconstructions and kinetic limitations during the epitaxial growth are responsible for Al occupying both octahedral and tetrahedral sites in (Al x Ga 1-x ) 2 O 3 , ultimately limiting the stability of the β-phase at x < ~50%. Local heterogeneity of composition results in the formation of a planar defect, affecting the stability of the β-phase. The similarity of such inclusions to the metastable γ-phase is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Normal stability of slow manifolds in nearly periodic Hamiltonian systems

Kruskal [J. Math. Phys. 3, 806 (1962)] showed that each nearly periodic dynamical system admits a formal U(1) symmetry, generated by the so-called roto-rate. We prove that such systems also admit nearly invariant manifolds of each order, near which rapid oscillations are suppressed. We study the nonlinear normal stability of these slow manifolds for nearly periodic Hamiltonian systems on barely symplectic manifolds—manifolds equipped with closed, non-degenerate 2-forms that may be degenerate to leading order. In particular, we establish a sufficient condition for long-term normal stability based on second derivatives of the well-known adiabatic invariant. We use these results to investigate the problem of embedding guiding center dynamics of a magnetized charged particle as a slow manifold in a nearly periodic system. Here, we prove that one previous embedding and two new embeddings enjoy long-term normal stability and thereby strengthen the theoretical justification for these models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Generalized Mercier stability criterion for stellarators

The Mercier criterion is a well-known stability criterion for tokamaks. It is derived from a 2 × 2 matrix eigenvalue problem arising from the expansion of resonant solutions about a singular surface where m−nq=0, with m and n being the poloidal and toroidal mode numbers, respectively, and q being the safety factor. The stability criterion is that the eigenvalues must be real, otherwise, the solution oscillates, violating the Newcomb crossing criterion. Because of the non-axisymmetry of stellarators, different toroidal as well as poloidal harmonics couple to each other. It follows that each singular surface can have multiple resonant harmonics, with multiplicity M≥1. The corresponding matrix eigenvalue problem involves a 2M×2M matrix, resulting in M pairs of positive and negative eigenvalues. The generalized stability criterion is that all eigenvalues must be real. While the original Mercier criterion can be expressed in terms of quadratures of equilibrium quantities over the singular surface, which can be evaluated anywhere, the generalized Mercier criterion can only be evaluated on rational q surfaces with a given set of resonant harmonics.

Physics↗
DOE OSTI2023

Accelerated kinetic model for global macro stability studies of high-beta fusion reactors

The field reversed configuration (FRC), such as studied in the C-2W experiment at TAE Technologies, is an attractive candidate for realizing a nuclear fusion reactor. In an FRC, kinetic ion effects play the majority role in macroscopic stability, which allows global stability studies to make use of fluid-kinetic hybrid (also referred to as Ohm's law) models wherein ions are treated kinetically while electrons are treated as a fluid. The development and validation of such a hybrid particle-in-cell algorithm in the Exascale Computing Project code WarpX are reported here. Implementation of this model in the WarpX framework benefits from the numerical efficiency of WarpX as well as its scalability on large HPC systems and portability to different architectures. Performance benchmarks of the new algorithm for large, 3-dimensional, full device simulations from the Perlmutter supercomputer are presented. Results of a series of FRC simulations are discussed in which the impact of two-fluid effects on the tilt-mode growth rate was studied. It was observed that, in agreement with previous Hall-MHD studies, two-fluid effects have a stabilizing impact on the tilt mode.

Physics↗
DOE OSTI2025

Thermally induced PtOx interfacial layer enhances stability of Pt/β-Ga2O3 vertical Schottky diodes

This study investigates the long-term stability of Pt/β-Ga2O3 field-plated Schottky barrier diodes at high temperatures, with extended thermal cycling and soaking stress. The device characteristics reveal a strong dependence on operating temperature, leading to an ON/OFF current ratio of ∼10× at ±3 V and 600 °C. Extensive thermal cycling (25 cycles over 100 h) between room temperature and 350 °C shows that leakage currents stabilize after the initial ten cycles. This stabilization is likely due to the formation of a thin PtOx layer at the Pt/β-Ga2O3 interface, as confirmed by high-resolution scanning transmission electron microscopy. Further exposure to a constant 350 °C environment for 10 h reveals a slight increase in the leakage current from 10−7 to 10−6 A at −5 V and degradation of the forward current, due to potential thermodynamic instability of the Ohmic contacts. This study provides insights into the changes in the Pt/β-Ga2O3 diode performance with thermal stress, offering a basis for predicting the device’s operational reliability at high temperatures for sensing and power applications.

08 HYDROGEN↗
DOE OSTI2023

Phase stability and coercivity in La 2 Fe 14 B magnet

Critical rare-earth free La 2 Fe 14 B (2:14:1) has the potential to be a gap permanent magnet. However, La 2 Fe 14 B decomposes into La, α-Fe, and La 4 Fe 4 phases below 1067 K. The phase stability and coercivity have been studied in La 2 Fe 14 B magnet using first principles DFT (density functional theory) calculation and micromagnetic simulation. For a perfect La 2 Fe 14 B cube (edge length of 256 nm) without any structural defects and soft magnetic secondary phases, the coercivity (8.5 kOe) is reduced to ~40% of its magnetocrystalline anisotropy field ( H A = 20 kOe). Further, the coercivity sharply reduces to 3.2 kOe upon forming a thin layer (2 nm) of α-Fe on the surface of the La 2 Fe 14 B cube particle. The DFT calculations indicate that a partial replacement of La by other rare-earth (RE) elements can enhance the structural stability of 2:14:1. The gains in cohesive energy are 0.75, 0.10, and 0.33 eV per formula unit in (La 0.5 RE 0.5 ) 2 Fe 14 B with RE = Ce, Pr, and Nd, respectively. Stabilizing the 2:14:1 structure and mitigating the formation of soft magnetic structural defects or impurity phases such as α-Fe is necessary to develop La 2 Fe 14 B based magnet, which can be moderately achieved via partial substitution of La by other rare earth elements such as Ce, Pr, and Nd.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich boron nitride (BN) nanosheet (Ni/BN) catalysts with higher methanol dehydrogenation activity and selectivity, and greater stability than that of some other transition-metal based catalysts. The interface of the two-dimensional (2D) BN with the metal nanoparticles plays a strong role both in guiding the nucleation and growth of the catalytically active ultrasmall Ni nanoclusters, and further in stabilizing these nanoscale Ni catalysts against poisoning by interactions with the BN substrate. We provide detailed spectroscopy characterizations and density functional theory (DFT) calculations to reveal the origin of the high productivity, high selectivity, and high durability exhibited with the Ni/BN nanocatalyst and elucidate its correlation with nanocluster size and support–nanocluster interactions. This study provides insight into the role that the support material can have both regarding the size control of nanoclusters through immobilization during the nanocluster formation and also during the active catalytic process; this twofold set of insights is significant in advancing the understanding the bottom-up design of high-performance, durable catalytic systems for various catalysis needs.

08 HYDROGEN↗
DOE OSTI2024

Accuracy of kinetic equilibrium reconstruction of NSTX and NSTX-U plasmas and its impact on the transport and stability analysis

An accurate magnetohydrodynamic (MHD) equilibrium reconstruction is an essential starting point for stability and transport plasma analysis. Herein this work describes an approach for obtaining kinetic equilibrium reconstructions using the OMFIT framework, which has been applied for the first time to spherical tokamak data from NSTX and NSTX-U. The EFIT equilibrium solver is integrated with experimental data analysis procedures and subsequent TRANSP transport simulations to enhance the accuracy of the reconstruction, in particular, at the edge region, by adding constraints on the total pressure and current density profiles, based on the transport code solution. The accuracy of the equilibrium reconstruction depends on the uncertainty and number of constraints, as well as the choice of basis functions to represent the pressure and current density profiles. Improved fidelity of the equilibrium reconstruction is demonstrated by reducing the variability of the magnetic axis and boundary locations from several centimeters, for reconstructions based on magnetic and experimental pressure constraints, to only several millimeters, for kinetic reconstructions based on transport code constraints, when different representations of basis functions were tested. The variability of the safety factor on axis was reduced ten times in the same sensitivity study. The accuracy of the equilibrium reconstruction and subsequent mapping of the experimental kinetic profile data have a significant impact on the trapped gyro Landau fluid and linear CGYRO turbulence simulations, which predict different spectra of unstable modes and turbulent fluxes for cases with different numbers of constraints in the equilibrium reconstruction. Conversely, the stability analysis performed using the GATO code shows plasmas that are stable to n = 1 MHD modes in both equilibria using magnetic and experimental pressure constraints as well as the transport code constrained equilibrium. However, a scan of parameters away from these conditions shows considerable deviation in the threshold of unstable modes between these reconstructions. Therefore, for reliable plasma analysis and use in turbulence and stability calculations, a high-fidelity equilibrium reconstruction with accurate kinetic constraints based on transport code solutions is necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Effects beyond ideal MHD on stability of wide and enhanced pedestal regimes in NSTX

Stability of edge-localized modes (ELMs) in spherical tokamaks is explored using the extended MHD model. Linear NIMROD simulations have been performed for three NSTX discharges 132543, 132588, and 141133, to investigate the role of resistivity, diffusivity, and shear flows on the onset of ELMs. The first discharge represents the wide pedestal regime and the later two discharges represent ELM-free enhanced pedestal H-mode. We first present the effect of toroidal rotation shear and find a flow shear destabilizing effect in these NSTX discharges. Simulations are also extended to include the two-fluid and ion gyroviscosity effects. Simulations show that the flow shear can shift the mode spectrum and alter the critical condition of ELM onset. We also uncover that ELM onset prediction in spherical tokamaks requires effects beyond MHD, in particular gyroviscosity and diamagnetic terms could stabilize Peeling-Ballooning modes consistent with the experimental observation of ELM-free regimes in NSTX. The findings give new insight into the nature of the interplay between resistivity, flows, and diamagnetic stabilization in ELM suppression and have potential applications to ELM control schemes in NSTX-U and next-generation spherical tokamaks. This study identifies the essential physical effects that must be included in future predictive and validation simulations.

NSTX↗
DOE OSTI2022

Stability of exact solutions of the (2 + 1)-dimensional nonlinear Schrödinger equation with arbitrary nonlinearity parameter κ

In this work, we consider the nonlinear Schrödinger equation (NLSE) in 2+1 dimensions with arbitrary nonlinearity exponent κ in the presence of an external confining potential. Exact solutions to the system are constructed, and their stability as we increase the 'mass' (i.e., the L 2 norm) and the nonlinearity parameter κ is explored. Here we observe both theoretically and numerically that the presence of the confining potential leads to wider domains of stability over the parameter space compared to the unconfined case. Our analysis suggests the existence of a stable regime of solutions for all κ as long as their mass is less than a critical value M*(κ). Furthermore, we find that there are two different critical masses, one corresponding to width perturbations and the other one to translational perturbations. The results of Derrick's theorem are also obtained by studying the small amplitude regime of a four-parameter collective coordinate (4CC) approximation. A numerical stability analysis of the NLSE shows that the instability curve M*(κ) versus κ lies below the two curves found by Derrick's theorem and the 4CC approximation. In the absence of the external potential, κ = 1 demarcates the separation between the blowup regime and the stable regime. In this 4CC approximation, for κ < 1, when the mass is above the critical mass for the translational instability, quite complicated motions of the collective coordinates are possible. Energy conservation prevents the blowup of the solution as well as confines the center of the solution to a finite spatial domain. We call this regime the 'frustrated' blowup regime and give some illustrations. In an appendix, we show how to extend these results to arbitrary initial ground state solution data and arbitrary spatial dimension d.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Physics-guided machine learning approaches to predict the ideal stability properties of fusion plasmas

One of the biggest challenges to achieve the goal of producing fusion energy in tokamak devices is the necessity of avoiding disruptions of the plasma current due to instabilities. The disruption event characterization and forecasting (DECAF) framework has been developed in this purpose, integrating physics models of many causal events that can lead to a disruption. Two different machine learning approaches are proposed to improve the ideal magnetohydrodynamic (MHD) no-wall limit component of the kinetic stability model included in DECAF. First, a random forest regressor (RFR), was adopted to reproduce the DCON computed change in plasma potential energy without wall effects for a large database of equilibria from the national spherical torus experiment (NSTX). This tree-based method provides an analysis of the importance of each input feature, giving an insight into the underlying physics phenomena. Secondly, a fully-connected neural network has been trained on sets of calculations with the DCON code, to get an improved closed form equation of the no-wall β limit as a function of the relevant plasma parameters indicated by the RFR. The neural network has been guided by physics theory of ideal MHD in its extension outside the domain of the NSTX experimental data. The estimated value has been incorporated into the DECAF kinetic stability model and tested against a set of experimentally stable and unstable discharges. Moreover, the neural network results were used to simulate a real-time stability assessment using only quantities available in real-time. Finally, the portability of the model was investigated, showing encouraging results by testing the NSTX-trained algorithm on the mega ampere spherical tokamak (MAST).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Modeling of the ECCD injection effect on the Heliotron J and LHD plasma stability

The aim of the study is to analyze the stability of the energetic particle modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. Additionally, the analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. The simulation results show that the n = 1 EPM and n = 2 global AE (GAE) in Heliotron J plasma can be stabilized if the magnetic shear is enhanced at the plasma periphery by an increase (co-ECCD injection) or decrease (ctr-ECCD injection) of the rotational transform at the magnetic axis ($\rlap{-} \iota_{0}$). In the ctr-ECCD simulations, the EPM/AE growth rate decreases only below a given $\rlap{-} \iota_{0}$, similar to the ECCD intensity threshold observed in the experiments. In addition, ctr-ECCD simulations show an enhancement of the continuum damping. The simulations of the LHD discharges with ctr-ECCD injection indicate the stabilization of the n = 1 EPM, n = 2 toroidal AE (TAE) and n = 3 TAE, caused by an enhancement of the continuum damping in the inner plasma leading to a higher EP β threshold with respect to the co- and no-ECCD simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗